Event ID 11 when connecting external hard drive

Similar Questions

• Media Player 12 losing library when the external hard drive is disconnected.

  I have all my music from an external hard drive. If the hard disk is on and I have Windows Media Player 12 to scan the drive, he built the library very well. However, I do like to keep this external hard drive on all the time so I must say Media Player to stop monitoring the disk in order to disconnect and power off. The problem is, the next time I reconnect the drive for music, I open the media player and the library has disappeared. I make sure that the reader always connects with the same drive letter, so it can't be the problem. Is it possible to keep all the information in the library when the hard drive is not connected to the pc. I'm sure that I was able to do this with previous versions of media player.

  WMP12 does not store the music files. It stores only the location of the files. If you are using a temporary drive, files disappear when the source goes away. The only solution for this is to put the files on your disk or hard drive connected all the time.

  To store your files on your hard drive in a place where the player plays automatically, go to the icon of (i.e.: C:\users\ ) when the folder opens, there is a folder named My Music. It is one of the files that WMP reads.

  If you don't have room on your hard drive to store all of the music, you can choose a few favorites or turn the music on your hard drive. You can just leave it to refill whenever you connect the WMP player.

• I connect external hard drive to crush

  I have a disc external hard - is possible to connect to my crush on the MacBook Pro and it moves faster when it connect to the USB port?

  You can get a bolt of lightning > USB adapter, but it will not be a more quickly as the connection from one player to a USB port on the Mac unless you use several USB drives to a USB connection.

• HP envy Phoenix: win 7 does not start with connected external hard drive

  I have a desktop HP Envy Phoenix with i7 chip and an SSD for the OS.  If I connect via USB external drive of 3 TB WD for the backup of the system does not start while it is attached.  The pc seems to be trying to boot from the outside, can't find the OS and does not start.  It will start fine with small external drives connected.  It is the size of the disk? Is there a way to fix this?

  Hello

  The WD drives seem to pose problems of my potential.  I have used other brands such as Seagate and Hitachi without running into problems with external USB drives causing the system to boot.  Maybe it's the USB adapter that I use which does not cause starting problems.

  @tpetras

  I used the adapter HP USB 3, which uses drivers NEC or TI and has never had a problem starting via a USB external (non - WD) readers.

• When put external hard drive or a usb ports on the old computer, windows xp flash drive cannot operate. Just try to take off the important information from this computer to put in another.

  Get the yellow signal, and even if the device seems to work, Assistant ask me to install a disk into drive G.

  It could happen because of the USB 1.1 of your old motherboard version. But your compatible USB 2.0 device & back USB 1.0 compatible with reduced performance mode. So, if the devices work, then just ignore the message.

  Also make sure your Win XP has at least service pack 2 installed.

  To find your version of Win XP:

  Start > run > type "winver" (only the text within the quotation)

  Reading the dialog box for the Windows version, subversion of copyright, Service pack etc.

  Before Windows XP SP2, the OS had no compatibility issue for the USB 2.0 device.

  Hopefully this will solve your problem.

  If you need any link of Service pack of windows so feel free to ask us. You can upgrade your old XP to SP3 last free cost simply by downloading a 500 MB file.

  S.Chatterjee

• My new Kindle Fire HD when connected to USB causes files on my external HARD drive to go away, they come back when the Kindle is disconnected and after a reboot, any help please

  If after installation with kindle, connected external HARD drive disappears

  USB ports are usually "matched" in groups, called hubs root.  These root hubs then control and distribute the power to the USB ports.  If any device on one of the two ports, the hub root, requires too much power, the other port loses power.  When a port USB Hub root loses power, the devices connected to the port 'disappears' of the Windows session.  Normally, after you disconnect the devices from the USB port and reconnect them "must" bring these.

  A free USB powered hub can help.  These allow usually additional power over USB ports, on its own USB ports.

• Files missing after moving iMovie events from local disk to external HARD disk. Are they lost?

  Hi all

  Tonight, I tried to clear up little space on my local HARD drive and wanted to spend my events/projects of the iMovie local library to an external HARD disk, which I connected via firewire 800.

  I opened iMovie (v10.1 - current version with all updates installed). I clicked on an event to highlight and then the FILE--> COPY OF LIBRARY of selected EVENTS.

  There, I sailed on the external drive and created an iMovie new library called ReWatch2015. I copied successfully eight different events, including files from my external hard drive.

  The ultimate goal is to get rid of them on the HARD drive internal, I highlighted the 20 remaining events I wanted to move and then used the FILE--> MOVE of EVENTS at the LIBRARY and specified ReGen_2015.

  It seemed at first glance to move. In fact, he seemed to move too darn fast in my opinion. When I looked at home in the library of the external drive, they were nothing more than a string of question marks, with a message telling me that particular item is not found and re-import the original clips. It's impossible because I have not kept the original source material on my internal drive. I had asked before if they are preserved in the library of iMovie and told me Yes, so I that's why I deleted the original source material.

  Don't see no activity on the disks, I did the cmd - Z to go back. Events have now shown upward into the iMovie library internal. HOWEVER, they still have the question mark, with msg on reimport. What is scary, is that if I go to ALL projects of them have visible thumbnails. Yet, when I click on any of these thumbnails to load the project into the editor, I am back to the page of question mark again.

  Are the file on drive HARD internal, and they just disassociated projects, or two-thirds of my library of events of 2015 are now toast? I was not under any type of backup Time Machine to be able to recover them, and frankly, if they left, it is not the end of the world since I was of the .mp4 displayed on Vimeo. But, I would just assume the iMovie library intact if possible.

  Suggestions on how to recover are greatly appreciated!

  Robert

  Hi Robert

  Am having exactly the same problem on a new iMac 2016 running El Capitan: when I want to MOVE events such as you describe it, they sometimes get lost in the original library, both in the target library. Like you, I noticed that a such attempt to move just a very short time even if several GB of data play a role. Sometimes however, iMovie is able to move successfully. I my case, I had to re - import events so lost since an additional backup, I got on another external drive that I couldn't find the clips 'lost' on the HARD drive more. Very scary!

  I think it's an iMovie/El Capitan question which could be corrected with future updates. The only solution I've found is to the events of the FIRST COPY, and then check if the target is really OK and only then select the MOVE option, which will remove the original library to free up space. In addition, I plan to copy on a regular basis my library full iMovie on an extra disk to backup using the finder.

  Did you find anything in the meantime?

  Morgy

• Time Machine backup external hard drives

  I've been using Time Machine to back up to an external hard drive.  External hard drive backups are visible in TimeMachine when the external hard drive is connected to the computer. How can I see the backups if the external drive is lost?

  External hard drive backup is buried in the backup.

  http://pondini.org/TM/32.html

  I strongly recommend using an alternative backup software like Carbon Copy Cloner. Allows you to separate the backups. Time Machine does not work.

• computer stopped detecting external hard drive

  My computer stopped detecting the new MyBook Essential external hard drive. Getting into Device Manager and says device working properly, but I can't open it or all files - scared because it has all my photos, downloads, music... everything!  Just deleted all old hard drive: 0 (((s'il vous plaît quelqu'un peut_il aider?)) Someone suggested updating the driver software, but I was worried that this would affect all files on the drive: 0 (thank you in advance... x

  Hello

  1. are you aware of any changes made to the computer, before the show?

  2. is there any error message when accessing external hard drive?

  Try to use the same drive on another computer and check if it helps

  Method 1: See the articles proposed for updating the drivers.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Method 2: Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 3: Reinstall the drivers for the external hard drive.

  (a) connect the external hard drive.

  (b) completely shut down the computer and unplug at the wall.

  (c) wait a minute before coming back plug it in and start the computer normally.

  (d) once you get to the office check if you are able to access the hard disk.

  If the above method fails, try to install the drivers on the hard drive manufacturer's website

  http://support.wdc.com/product/download.asp?wdc_lang=en

  Method 4: Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running check disk on the hard drive if bad sectors are found on the disk hard when Check Disk try to repair this area if all available on which data can be lost.

• How can I remove the write protection from my photos to transfer to an external hard drive?

  I have Windows XP and I want to transfer my photos on an external hard drive, but I can't remove write protection. I right click and uncheck the box, but it changes on its own. How can I transfer my photos?

  Have you seen dialogue indicating files can't be copied?
  If_Yes_what at - he say and how have you tried to copy
  the files?

  Maybe the info will help you...

  OK... when the external hard drive is connected to your
  PC... admittedly with a drive letter to start.
  My computer.

  Once you know what that is... try to drive letter the following
  and let us know what is the result.

  Select (highlight) the file names of the photos you want to
  copy on the external hard drive. Right-click on the selected group
  (or the folder itself if you want that all the photos) and the
  menu choose... Send to... and choose the drive letter of
  the external drive.

  Then uncheck "read-only" you left click... "." Apply / OK?
  (it works in a lot also selected)

• I have a WD external hard drive that I used for a while and all of a sudden I can't.

  The device is a USB connected external hard drive. I used it on a regular basis until today. When I connect it it seems to connect (it lights up), and when he did it before she would open a window that would ask if I wanted to open and examine its contents. It does not now. When I go to Start computer it is no longer present upward with the other HD etc. I took it on another computer and it worked fine. I wonder if a driver does not work?

  Restore points should be back fairly in time, if you have enabled the restoration of the system.

  Read the information contained in the links I provided. about how to use system restore.

  You do not accept the available Restore Point.

  Mick Murphy - Microsoft partner

• Seagate external hard drive / / no display

  Recently I bought a Portable Seagate 2 TB external hard drive for my MacBook Air. I put all my movies, music, ext documents on my hard drive with my important homework. The reason why I did was reset my mac, then return all my old documents, photos ext, back to their place of origin. I have managed to do and frees a lot of space. A few days after my MacBook fell asleep with a connected external hard drive and now the hard drive is no longer present on the desktop or in finder. I am able to find in my "disk utility" , but for some reason, it shows the hard drive passed out faded gray and full? I tried to hook up with different cables and on the various devices as well. Also sang the first aid option in "disk utility" with no other results. I have contacted apple support and found out it was the external hard drive with the problem, so they couldn't help me. They then redirected me to Seagate Support, and I had already tried the methods they gave me (see list above). I was wondering if anyone here on communities of Apple has experienced the same problem as me, it would be that much appreciated advice you may have. I have important files that I need to recover.

  Help, please!

  Had a similar problem with external hard drive WD also on model MBA early 2015. Found if I disconnect the external hard drive restart MBA and then reconnect the external hard drive it was working normally again.

  Another thing I tried was still unplug HD plugin MBA on sector and re - a SMC.

• Why my external hard drive gives me an error RAID?

  Almost everytime I wake up my MacBook Pro to sleep with the connected external hard drive I get this RAID error notification:

  

  I enjoy the WD drive utilities and it does nothing. Can I do to stop this?

  I have since solved this problem.

• External hard drive problems - we have most of the files to get a message "access denied."

  USB connected external hard drive was used with XP.  For a small period of time, we had to connect to a machine from W7.  Now that we are back to the XP machine, we have most of the files to get a message "access denied."  How we fix the problem.  The files are images, videos or music.

  Try this,

  Start in safe mode.
  Open your computer and right click on your external hard drive.
  Go to properties.
  Click Security.
  Click on Edit under a quote "to change permissions, click on change."
  Click on Add.
  Type in "everyone" in the white box.
  Then check in the box "total control".
  Press OK.

  This makes the hard drive usable by everyone (all users and different computers)

  I hope this helps.

• External hard drive not detected in Windows 7.

  G ' Day,.

  I have a 1 TB external hard drive.  It is recognized by my new computer, but not by the 8 year old.  I use Windows 7 and is updated daily.  Please could someone tell me what I should do to get the old computer to recognize the H E drive please.  The hard drive is a WD and almost new.

  Perry has soon

  Hi Perry,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that your external hard drive is not recognized by your computer.

  This could happen due to some system conflicts.

  I need some information.

  1. What is the make and model of your computer / external hard drive?
  2. You get no matter what error code or error message?

  Try the methods.

  Method 1: Run the hardware and devices Troubleshooter

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Step 1: I suggest you check in Device Manager if the external drive is listed there.

  1. Connect external hard drive to the computer.
  2. To open Device Manager, type devmgmt.msc in the start search box and press ENTER.
  3. Check to see if the external hard drive is listed.
  4. In Device Manager, expand the hard drive listed in the list of devices.
  5. If the hard disk is listed, are doing a right click on it > click Properties.
  6. In general, look under device status for the message. After back if there is no error message.

  Step 2: Check if the external drive is detected in disk management.

  If the hard drive recognized in disk management and if there is no drive letter assigned, I suggest that you right-click on the drive and assign a drive letter and check to see if it helps:

  Reference: http://windows.microsoft.com/en-US/windows7/Change-add-or-remove-a-drive-letter

  I hope this helps. Please let us know the results. We will be happy to help you further.