Event NAVIGATOR_EXIT of different application.

Similar Questions

• Event ID 10016 - the application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  Lately, I'm getting this system error a lot now that I've upgraded to Windows 8 Pro is an event DistributedCom 10016 ID. Here is the text of the error:

  The application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

  the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from the address LocalHost (using LRPC) running in the container of the application unavailable SID (not available). This security permission can be modified using the Component Services administrative tool.

  Anyone has an idea why I get this error?
  Walt

  Same thing here. Grayed. Windows 8.1 seems to fill the observer of events with many more errors than previous versions.

  Edit: OK, discovered why it is grayed out. There are 2 reg key, you must set permissions before going to the Configuration of DCOM in component services. The CLSID key and the APPID key.

  From another forum, although it applies to a different application, same principle:

  1. open Regedit.
  2. go in HKEY_Classes_Root\CLSID\ * CLSID *.
  Note: * CLSID * stand for the ID that appears in your event viewer error. In your case, it is {C2F03A33-21F5-47FA-B4BB-156362A2F239}.
  3. right-click on it and select authorization.
  4. click on Advance and change owner to administrator. Also click on the box that will appear below the threshold of owner.
  5. apply a full control.
  6. close the tab, then go to HKEY_LocalMachine\Software\Classes\AppID\ * APPID *.
  Note: * AppID * is the ID that appears in your event viewer. In your case, it is {316CDED5-E4AE-4B15-9113-7055D84DCC97}.
  7 right-click on it and select authorization.
  8. click on Advance and change the owner to administrators.
  9. click on the box that will appear below the line owner.
  10. click on apply and grant full control to the administrators.
  11. close all tabs and navigate to the administration tool.
  12. open component services.
  13. click on the computer, click my computer, and then click DCOM.
  14 find the corresponding service that appears on the display of the error.
  15. right-click on it, and then click Properties.
  16. click the Security tab, and then click Add a user. Add the SYSTEM and then apply.
  17. check enable local.

  Then use the relevant keys here and the DCOM Config utility should give you access greyed onareas:

  CLSID:
  
  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

• "the db file sequential read" waiting for event slow down an application.

  "the db file sequential read" waiting for event slow down an application.
  
  It is a rather strange problem. There is an update statement that hangs on the wait event 'db file sequential read' and until you restart the database, the query works fine. It happens once a week, usually Monday or after several days of large amount of work.
  
  I checked the processor and is fine, memory is very good, although the SGA and PGA have taken maximum memory. Flow of the disc seems to be ok since each another session on the basis of data looks very good.
  
  I guess that there is a missing configuration to avoid having to restart the database each week.
  
  Any help is greatly appreciated.

  Hello

  If you want same order of the tables as plain exp after reboot just go with ordered hint

  UPDATE item_work_step
  SET user_name = :b1,
  terminal = SYS_CONTEXT ('USERENV', 'TERMINAL'),
  status_cd = 'IN PROCESS'
  WHERE item_work_step_route_id =
  (SELECT item_work_step_route_id
  FROM (SELECT /*+ORDERED */ iws.item_work_step_route_id
  FROM user_role ur,
  work_step_role wsr,
  work_step ws,
  app_step aps,
  item_work_step iws,
  item_work iw,
  item i
  WHERE wsr.role_cd = ur.role_cd
  AND ws.work_step_id = wsr.work_step_id
  AND aps.step_cd = ws.step_cd
  AND iws.work_step_id = ws.work_step_id
  AND iws.work_id = ws.work_id
  AND iws.step_cd = ws.step_cd
  AND iws.status_cd = 'READY'
  AND iw.item_work_id = iws.item_work_id
  AND iw.item_id = iws.item_id
  AND iw.work_id = iws.work_id
  AND i.item_id = iws.item_id
  AND i.item_id = iw.item_id
  AND i.deleted = 'N'
  AND i.item_type_master_cd = :b3
  AND ur.user_name = :b1
  AND aps.app_name = :b2
  AND ( iws.assignment_user_or_role IS NULL
  OR ( iws.assignment_user_or_role IN (
  SELECT ur.role_cd
  FROM user_role ur
  WHERE ur.user_name = :b1
  UNION ALL
  SELECT :b1
  FROM dual)
  AND iws.assignment_expiration_time > SYSDATE
  )
  OR ( iws.assignment_user_or_role IS NOT NULL
  AND iws.assignment_expiration_time <= SYSDATE
  )
  )
  AND (iws.pend_date IS NULL OR iws.pend_date <= SYSDATE
  )
  ORDER BY aps.priority,
  LEAST (NVL (iw.priority, 9999),
  NVL ((SELECT NVL (priority, 9999)
  FROM item_work
  WHERE item_id = i.parent_id
  AND work_id = 42),
  9999
  )
  ),
  DECODE (i.a3, NULL, 0, 1),
  NVL (iw.sla_deadline,
  (SELECT sla_deadline
  FROM item_work
  WHERE item_id = i.parent_id
  AND work_id = 42)
  ),
  i.parent_id,
  i.item_id) unclaimed_item_work_step
  WHERE ROWNUM <= 1)
  

  If you want to get rid of the nested loops use USE_HASH

  UPDATE item_work_step
  SET user_name = :b1,
  terminal = SYS_CONTEXT ('USERENV', 'TERMINAL'),
  status_cd = 'IN PROCESS'
  WHERE item_work_step_route_id =
  (SELECT item_work_step_route_id
  FROM (SELECT /*+ORDERED USE_HASH(ur wsr ws aps iws iw i) */ iws.item_work_step_route_id
  FROM user_role ur,
  work_step_role wsr,
  work_step ws,
  app_step aps,
  item_work_step iws,
  item_work iw,
  item i
  WHERE wsr.role_cd = ur.role_cd
  AND ws.work_step_id = wsr.work_step_id
  AND aps.step_cd = ws.step_cd
  AND iws.work_step_id = ws.work_step_id
  AND iws.work_id = ws.work_id
  AND iws.step_cd = ws.step_cd
  AND iws.status_cd = 'READY'
  AND iw.item_work_id = iws.item_work_id
  AND iw.item_id = iws.item_id
  AND iw.work_id = iws.work_id
  AND i.item_id = iws.item_id
  AND i.item_id = iw.item_id
  AND i.deleted = 'N'
  AND i.item_type_master_cd = :b3
  AND ur.user_name = :b1
  AND aps.app_name = :b2
  AND ( iws.assignment_user_or_role IS NULL
  OR ( iws.assignment_user_or_role IN (
  SELECT ur.role_cd
  FROM user_role ur
  WHERE ur.user_name = :b1
  UNION ALL
  SELECT :b1
  FROM dual)
  AND iws.assignment_expiration_time > SYSDATE
  )
  OR ( iws.assignment_user_or_role IS NOT NULL
  AND iws.assignment_expiration_time <= SYSDATE
  )
  )
  AND (iws.pend_date IS NULL OR iws.pend_date <= SYSDATE
  )
  ORDER BY aps.priority,
  LEAST (NVL (iw.priority, 9999),
  NVL ((SELECT NVL (priority, 9999)
  FROM item_work
  WHERE item_id = i.parent_id
  AND work_id = 42),
  9999
  )
  ),
  DECODE (i.a3, NULL, 0, 1),
  NVL (iw.sla_deadline,
  (SELECT sla_deadline
  FROM item_work
  WHERE item_id = i.parent_id
  AND work_id = 42)
  ),
  i.parent_id,
  i.item_id) unclaimed_item_work_step
  WHERE ROWNUM <= 1)
  

  and for small tables, you can try adding for example FULL (your) FULL (wsr)

  It can be rewritten in a different way, but it's the fastest way to try how query will be if you rewrite it. Check the explain plan command if certain partially ordered tables are not joined because you can get the Cartesian join, it seems that it will be ok.

  View query result in the em console.

  Concerning

• How to display on my screen 2 different applications at the same time?

  How to display on my screen 2 different applications at the same time?

  Hello

  The best place to ask would be the forums for answers corresponding to your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  =====================

  If you have Windows 7 with Aero - click with the right button on the taskbar at the bottom of the screen and click on 'show windows '.
  Side by Side.

  For all versions of Windows:

  You could also reduce less than full screen using the small box to the left of the red X at the top right
  and then resizing windows as you want.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• All the tools to assign bandwidth for different applications?

  I need to run several programs at the same time, when an access to the internet, sometimes the other program is not able to access the internet and error, anyone have any suggestions on all the tools to assign bandwidth for different applications? so in case the two applications need to access the internet at the same time, it wouldn't have problem to connect to internet?

  Thanks for all the suggestions

  Hi oem7110,

  It could be some third party tools available online that might help you in the task.

  Use your favorite search engine to search for any other tool.

  Important: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever I connect to internet I get this message within seconds, Internet Explorer has stopped working the check online for a solution of the problem event name: the BEX Application name: IEXPLORE. EXE

  ExploInternet Internet exporer has stopped working

   

  Windows can check online for a solutiom to the problem

   

  -> OnlinCheck check online for a solution and close the program

   

  -> Close the don't

   

  PROBLEM ISEVIDENT

  Signature of the problem:

  Problem event name: BEX

  Application name: IEXPLORE. EXE

  Application version: 11.0.9600.18231

  Application timestamp: 56b8edd6

  Fault Module name: StackHash_d7b8

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception offset: 1002ab36

  Exception code: c0000417

  Exception data: 00000000

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 3081

  Additional information 1: d7b8

  More information 2: d7b83704f6db94e0c4619825a3362866

  3 more information: 6b 15

  Additional information 4: 6b153378e67b448e43ca3c57dc8920c9

  Then, I lose the page and have courses all over again.

  Can someone please help. It started only happening more than a week.

  Hello

  Thank you for your response. Check this link and follow the post SpiritX for troubleshooting steps.

  Please let us know how it goes for help us to you more.

• A project, two different applications with different arguments

  Hello

  I have a project where I need to put two different applications, so that the icons appear on the device, each of them sends an input parameter. According to this setting, the backend will be development or production.

  How can I do?

  Thank you

  If you have two applications, you can create two different projects, can't you? or maybe the alternative entry points may be of interest to you.

• sharing data between different applications

  HIII friends...

  Please share yourideas.

  is it possible to share the database saved in playbook among different applications.

  What app can access data that are modified by another application.

  right now I used StorageDirectory application but it's a unique directory for an application where no one can access it.

  while I'm trying to use documentsDirectory or desktopDirectory I received the message because the QNX operating system error there is no.

  So please tell me how I can create a database that can be accessed by any other application.

  Hi all

  I found the solution after posting just he...

  

  access_shared

  Add this to your blackberry - app.xml and it works by creating the file using documentDirectory.

• possible to have 2 different application fields for two different clips at the same time

  Hello

  possible to have 2 different application fields for two different clips at the same time for the classification match in terms of the scope, only not to the eye?

  Not that I know of.  And Yes, it would be very useful. As would the ability to go back 2 in reading monitor and a button "game clip under the read head 1. Sigh.

  Neil

• * Creating Cloud * [can I use two different applications of cloud on different computers at the same time for example Photoshop on one and on another InDesign?]

  So I know that you can have creative cloud up to two computer and its not of platform specific, so you can have it on a Mac and the Windows platform at the same time. BUUUT I know that you can not use them simutaniously, but which still apply to the when im I need to work on photoshop on only one computer and indesign on another who would always use them at the same time so he would evict me? or can be used on two different programs at the same time?

  Always there was confusion on this issue.

  Adobe said yes in 2012 and 2014.

  Running different applications - 2 computers, a single license

  Contradictory information on the simultaneous use of CC.

  Don't know the current position of Adobe.

• Unable to connect to a different application on a third computer

  I have a subscription to creative cloud and Dreamweaver CC2015 installed on the #1 computer. I have Dreamweaver CS6 (not part of the subscription of the CC) installed on #2 and #3 computers. I cannot now begin ONE of these applications without getting the message on "you can't have 2 connections" and "sign on one of them" (not word for Word, the message is not open immediately). This feels like being not able to open, for example, Photoshop, because I have Dreamweaver open! CS6 DW doesn't do not part of the subscription of the CC, it's a completely different application, bought and paid for. I don't have the creative Office Cloud app installed on two of these computers (#1 and #2) but there seems to be no way to sign up on that if it factored into two connections, and I can't uninstall it even on computer #2 because it indicates that it programs there it which need it; NO program of creative cloud except the desktop app is installed on this computer. Any help?

  The two CC & CS6 could cause some conflicts, please discuss with us to Support Adobe

  Concerning

  Stéphane

• Connect between two different applications. A call to the other application.

  I would like to know if it is possible to connect between two different applications in oracle apex IE appeal one request for the other? If the applications are allowed even say LDAP.

  Yes,

  Refer to the post office, requested by me and answered by fac586

  How to use one login for all applications in one only workspace

• Dear Adobe. Creative cloud has different applications. Some try to versions and others may be installed. My question: the apps that said installation, for the bridge of eksampel, is that included my creative claud account?

  Dear Adobe. Creative cloud has different applications. Some try to versions and others may be installed. My question: the apps that said installation, for the bridge of eksampel, is that included my creative claud account?

  Hi Tomas.

  If you have creatively Cloud Complete/All Apps, you should have the complete list of available desktop applications.

  If some show buy or try or judgment, please see this link:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  Guinot

• different applications on multiple computers

  Hello, I was wondering if it is possible, with a single subscription to Creative (complete) cloud, to install different applications on multiple computers:

  I know that I can use the apps on two computers with the same subscription, but I wish I had a computer with all the apps, a laptop with a few applications (photoshop and illustrator) and another with applications for the web...

  Is this possible? This global issue or only on a per installed the application on a computer.

  I hope my question is clear and can someone help me with it.

  Good day.

  I wish I had a computer with all the apps, a laptop with a few applications (photoshop and illustrator) and another with applications for the web...

  Is this possible?

  N °

  Activation account for all software by unit in the entire plan of cloud. You can activate on a maxmum of two devices at the same time.

  Three (or four) simultaneous activation (one, some or all of the apps enabled on each device) would require two memberships and two Adobe separate them.

• How to assign different applications of 1 package of complete creative cloud between different users?

  Hello

  We are a small startup that contains a bag of full creative cloud.

  Would like to know if there is a way for us to split the individual applications in Creative full Cloud, among others in our team. (We have an account of the team).

  For example, 1 computer with an ID must only access to Premiere Pro, 2 computers with a different ID needs than Photoshop.

  Thank you!

  you say that we can log on to multiple computers at the same time with the same ID on cloud creative to use different applications at the same time? That would certainly solve a ton of problems.

  This isn't how creative cloud for teams. It is licensed per seat.

  You have a creative cloud under a team license (full) membership? If so, that can be used by a seat (or user).

  Most users (even for a cloud app) need more seats. Your best product line may be 1 place to Complete and several unique App places.

  So, if you want to add (and pay extra for) membership application (or full membership) for various people on your team account, which can be done through the console of administration of the team.

  See Cloud technology. Adobe Creative Cloud for small & medium businesses

  Do scroll to the 'start-up is easy"and read from there.