Event Veiwer ERROR

Similar Questions

• I get the thesis of my observant event log errors.

  I get the thesis of my observant event log errors. Please help me find a solution for the errors I have thanks. On the correction of errors please send me web links to solve problems.

  1. your computer not was not assigned an address from the network (by the DHCP server) for the network card with network 0x00D041BE61DB address.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  2. your computer not was not assigned an address from the network (by the DHCP server) for the network card with network 0x0800270004C2 address.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  3 session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D

  4. dynamic link libraries custom are loaded for each application. The system administrator should review the list of libraries to ensure that they are linked to trusted applications.

  5 resolution of names for the name officecdn.microsoft.com expired after none of the servers configured DNS responded.

  6 WLAN AutoConfig service has stopped successfully.

  7. The ICS_IPV6 failed to allocate _ bytes of memory. This may indicate that the lack of virtual memory, or that the Manager of memory has encountered an error internal system.

  Log name: Microsoft-Windows-Dhcp-Client/Admin
  Source: Microsoft-Windows-Dhcp-Client
  Date: 19/02/2015 04:27:17
  Event ID: 1001
  Level: error
  Description:
  Your computer not was not assigned an address from the network (by the DHCP server) for the network card with network 0x00D041BE61DB address.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  You can remove the error by following the advice of 4468mt in this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/EventID-1001-DHCP-your-computer-was-not-assigned/2b5227e0-8171-E011-8dfc-68b599b31bf5

  Log name: Microsoft-Windows-Kernel-EventTracing/Admin
  Source: Microsoft-Windows-Kernel-EventTracing
  Date: 19/02/2015 04:25:11
  Event ID: 3
  Level: error
  Description:
  Session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D

  See the following link for a solution:
  https://social.technet.Microsoft.com/forums/Windows/en-us/0c942bd9-47ad-4897-a5c2-485cc9fe681f/Microsoft-Security-client-OOBE-stopped-due-to-the-following-error-0xc000000d?Forum=w7itprosecurity

  Log name: System
  Source: Microsoft-Windows-Wininit
  Date: 27/02/2015 03:34:33
  Event ID: 11
  Level: WARNING
  Description:
  Custom dynamic link libraries are loaded for each application. The system administrator should review the list of libraries to ensure that they are linked to trusted applications.

  This report of warning is ignored. Only occasionally do you see event ID: 11 reports that reveal an unwanted guest when the computer is started.

  Log name: System
  Source: Microsoft-Windows-DNS-Client
  Date: 24/02/2015 22:51:01
  Event ID: 1014
  Level: WARNING
  Description:
  Name resolution for the name of officecdn.microsoft.com has expired after none of the servers configured DNS responded.

  This report of warning is ignored. The frequency with which this report occurs varies from one computer to the other depending on the quality of the internet connection. They are usually indicative of a temporary problem and if not all computers are located in the most, Event Viewer system log.

  Log name: System
  Source: Microsoft-Windows - autoconfiguration WLAN Service
  Date: 18/02/2015 23:39:07
  Event ID: 4001
  Level: WARNING
  Description:
  Autoconfiguration WLAN Service has stopped successfully.

  This report of warning is ignored. These reports are generated every time that the computer starts shutdown.

  Log name: System
  Source: Microsoft-Windows-SharedAccess_NAT
  Date: 19/02/2015 04:25:19
  Event ID: 34005
  Level: WARNING
  Description:
  The ICS_IPV6 failed to allocate

  bytes of memory. This may indicate that the lack of virtual memory, or that the Manager of memory has encountered an error internal system.

  This report of warning is ignored.
  https://support.Microsoft.com/kb/2550111?WA=wsignin1.0

  You have no reports of significant error in your event viewer system log.

• T500 w Vista hangs light w HDD and event log error iastor with ID 9 (Device\Ide\iaStor0)

  Summary

  Edited: This problem was finally resolved by Intel Matrix Storage Manager driver 8.6.3 sent by Lenovo, January 13, 2009

  It is an intermittent problem on 500/T400 with XP or Vista 32.

  Vista 32: the HARD drive light stays on for several minutes, sometimes never goes. The machine crashes immediately, or it may continue to work for a while sometimes sluggish performance w. In all cases the operating system stops not completely so that the HARD drive light is forcing a hard stop with the keyboard, button on / off.

  XP: random BSOD of iastor.sys.

  In the log window of the events is an event of error each time passed than the HDD light grip. Source is iastor, Id is 9, and the text is "the device, \Device\Ide\iaStor0, did not in the expiration time. See below for a description of how show all events iastor error 9 in your event log.

  The problem has appeared since the second or third week of December. The likely source is an update of the Intel Matrix Storage Manager, driver version 8.6.0 delivered on 4 December.

  This driver has been after December 4, distributed via Thinkvantage System Update. T400/500 made in December were also shipped with this driver installed. Since then, lenovo has withdrawn the driver, drivers, T400 and page software here and the T500 here page now shows the driver for Vista 32 and XP as version 8.2.4.

  The experience is that this problem is solved in the restaurant or by installing the 8.2.4 version of the Intel Matrix Storage Manager driver. If the 8.6.0 driver was installed through system update, go to Device Manager and open the Intel(r) ICH9M-E/M SATA AHCI Controller. On the driver tab, make sure that 8.6.0 is installed, and then click the roll back button.

  If the T400/500 has been shipped with the 8.6.0 driver installed, first driver to download the 8.2.4 and run the extract in the c:\drivers folder. Update driver then choose Device Manager. On the second screen appearing to ensure you choose "Let Me pick from a list of drivers on the computer' - in the case otherwise, he will tell you, best driver is already installed when you click Next. In the next screen, select Intel(r) ICH9M-E/M SATA AHCI Controller and click on "disk" and on the next screen, specify the path c:\drivers\win\imsm.

  PS review iastor in case connection error messages comparing them to the update system install history as follows:

  1. in Control Panel, in administrative tools, open the Windows event log. If this is not the first time, you use the newspaper, you may need to select the local newspaper - the top left - line for the Summary window to open in the Middle, you can maximize this window down.

  2. Select the error line in the Middle window and click Show all instances of this event on the right side. All error events are now listed in the Middle window.

  3. click on filter the current view on the right side. In the new menu, enter 9 in the field of event ID, select ok and then Yes.

  4. you should now have a list of all occurrences of the error in iastor event. Scroll through the list and note the timestamp of the first occurrence of the error.

  5. open Thinkvantage System Update, then select historical spectacle of installation. Scroll the window to the right you see the timestamps. Examine your updates, just before the message in iastor appeared first in your event log.

  __________________________________________________________

  Original entry

  My new T500 a few days after the execution of the first update of the system began to hang once or twice every 24 hours with light on HARD drive and "the device, \Device\Ide\iaStor0, did not in the expiration time" in the registry.

  ,

  iastor is the Intel Matrix Storage Manager (MSM) for their device RAID/AHCI controllers. The Intel AHCI controller listed in as installed for the T500 shows version 8.6.0 Device Manager, which is the current version according to the Intel web site.

  There are zero warnings to disk in the event log errors, I ran the drive diagnostic - the drive is healthy. I don't think that this is a problem of DVD or disc, it's the MSM which is a failure.

  Googling on the MSM error message there is a certain. A batch is since last year and concerns of Intel THAT MSM supporting properly - l/min, this has been fixed in MSM 7.5.0 see http://www.intel.com/support/chipsets/imsm/sb/CS-025783.htm

  A second batch was held earlier this year for Dell laptops that, without looking into the details, seems to have been caused by an incompatibility between the BIOS and the MSM reported. (Update system to update my BIOS to 1.20 - 1, 01).

  Other solutions to this problem found on the web include the removal of iastor/MSM settings in the Windows registry to disable l/min and turn off AHCI in the BIOS.

  It would be nice to be able to verify that this isn't a hard drive problem by disabling the AHCI and therefore the Intel controller. How to do that in T500 BIOS Setup and what are the implications on the performance of my drive (Hitachi 160 GB at 7200 RPM)?

  
  

• How can I fix the errors in my event veiwer

  My laptop runs so slow Ive defragmented memory but it only lasts about a minute and back % 21 free, Ive cleaned the defraged files & programs obsolete registry what else can I do Internet explorer freezes and crashes. I should go do a restore or recovery?

  Errors are application hang error 1001, 1002, & service MAST 3 & 4 msinstaller 11714 error and error microsoft visual c ++

  any help would be appreciated thanks in advance.

  Hi Brat,

  Thanks for posting in the Microsoft community.

  The description you have provided I understand that there are some performance issues on your Windows XP computer. In addition, Internet Explorer crashes. It would be useful that you could let us know a few things.

  a. don't you make changes to the computer before the show?

  b. what version of Internet Explorer is installed on the computer?

  To resolve these issues, I suggest that you try these methods.

  Method 1:

  Check out the link and follow the steps.

  You may experience slow performance in Windows XP SP2 when you use the Favorites menu in Internet Explorer or in Windows Explorer

  http://support.Microsoft.com/kb/898612

  Method 2:

  Visit the link and follow the steps provided in the article.

  The system performance is slow after you install Windows XP Service Pack 2 or upgrade to Windows XP Service Pack 2

  http://support.Microsoft.com/kb/898583

  Method 3:

  You can also read this article.

  Microsoft Automated Troubleshooting Services and Platform Support information diagnostic

  http://support.Microsoft.com/kb/2598970

  Hope, these methods helped to solve the problem in another response, and we will provide you more steps.

• Satellite L855 - client event ATI error

  I use a laptop L855 and in the course of the last day that I noticed in Event Viewer every min or so I get an ATI error event customer, without more details are available but he enters a new event for this about 1 min!

  Everything seems to work very well if anyone knows what it is and how to stop it?

  > Everything seems to work very well if anyone knows what it is and how to stop it?
  ATi customer must refer to the ATI catalyst control center.
  The ATI Catalyst Control Center software gives you complete control of performance and Visual quality of your graphics card ATI Radeon for Visual experience on your laptop.

  You could try to reinstall the driver ATI but to be honest I put t know if it would be useful to you to stop display errors in the event viewer.

  On the other hand, if your laptop works properly I would be not worried about entries in Event Viewer. This isn't really important

• Windows 2008 standard R2 64 bit - issue event veiwer

  I got this message in the event viewer on the server

  Degraded ramdisk: Ramdisk 0 event (PERC integrated H700) 2057 (raid1) controller 0 ID

  What do I need to confirm is not this error or what means caution as drive 0 / real 1 failed in the matrix raid - Yes or No

  Second question is, does somehow to the Raid Controller's battery?

  Which means that if the battery went wrong the error above does not reflect that the error above reflect only that the drive itself is dead battery...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Telephone call about the event log errors - they claim to be the Technical Support

  Original title: event error logs

  I get a phone call from a person claiming to be a b/c my computer Tech support has published many errors in the event log.  Is - is this legitimate?  He wants me to do stuff in the event log.

  Hello

  Yes, it's a SCAM!

  Avoid scams to phone for tech support
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  The Internet Crime Complaint Center (IC3) is a partnership between the Federal Bureau of Investigation
  (FBI) and the National White Collar Crime Center (NW3C), funded in part by the Bureau of Justice Assistance
  (BJA).
  http://www.ic3.gov/complaint/default.aspx

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Guard judgment of Windows XP. Event Veiwer Watch: \Device\Harddisk0\D, has a bad block

  I have a Dell Dimension 2400 with Win XP PRO SP3. It keeps closing after half an hour to an hour. The event viewer shows the following error in the system log: \Device\Harddisk0\D, has a bad block

  Same thing happens in Safe Mode as well. I ran McAfee who reported no virus. I have auto-updated from Microsoft on and just installed the lates updates.

  Help, please. Thank you... Nam

  Speed stop?

  Unexpected/unpredictable and quick stops are generally caused by overheating or bad RAM modules.  This happens too fast to create an entry in the newspapers.  Try downloading / running the freeware 'CoreTemp'.  It will show you how hot your CPU is getting and how close to maximum temperature, it is.  If this is your problem, open your folder and check your fans to make sure they turn all.  Use a can of compressed air to remove dust, because it can act like a blanket and heat your components.

  To solve your problem of bad block, run "Chkdsk" with the 'repair' or ' / R ' option.  This should clean up your bad block problem.

  "How to perform the disk error checking in Windows XP"

  <>http://support.Microsoft.com/kb/315265 >

  HTH,

  JW

• NET optimization service event viewer error 1111

  the Viewer .net optimization service event 1111 service error

  Hello

  See the link, download the package and install. Check whether the problem is resolved.
  Package redistributable Microsoft Visual C++ 2010 (x 86)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5555

• The Event Viewer error on startup: "the scheduled task of CARPET met a failure during configuration data collection. HR = 0xC004F00E.

  I use Windows XP with AMD processor clocked at 1.6 Ghz and 2 GB of RAM. This error appears in the event viewer whenever my computer starts. I don't know if it's doing any harm. can someone advise?

  original title: the scheduled task of CARPET met a failure during configuration data collection. HR = 0xC004F00E

  Hello Steven,

  Did you ever receive notifications that a virus or malware has been removed from your system recently?
  My only thought is that it is the remains of an infection on your machine.
  It is most likely harmless, but I don't understand why you'd be concerned.
  Do you have any task scheduled to run at startup using Task Scheduler built into Windows?
  http://support.Microsoft.com/kb/308569
  I would check to see if there are tasks to run at startup:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_tsconcepts03.mspx?mfr=true

• Automatic transfer of event log errors?

  It is perhaps a stupid question; at work, I run a Windows 2003 R2 server, in which 4 Windows XP clients connect to (and a client of Windows 7) as well as a couple of printers. My question is probably quite simple, but y at - it a way for errors in the log of events on client computers should automatically be transmitted or alerted to me, as the administrator of the server and the network? Most of the time people on client computers are not aware, an error has occurred, and it is difficult to their kickoff to verify their (stubborn!) event logs, so if it were possible, it would really help me to solve some problems we had. And I'm not normally sitting at our server because I have a workstation for myself for my non-tech homework.

  Thank you very much.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the onWindows Server audience. Please post your question in the Sub forum.

  Link:http://social.technet.microsoft.com/Forums/en-US/category/windowsserver

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Anyone know the cause of an application with the following event ID error: 1000?

  An error caused the program iTunes on my computer to stop working causing Windows to close.   I found the error in the case where connects and looked up the info listed under properties of the event.   I included the info below.

  Log name: Application
  Source: Application error
  Date: 20/05/2014-12:43:07 AM
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Melanie-PC
  Description:
  Failed application iTunes.exe, version 11.2.0.115, time stamp 0x53755cb7, module AirTrafficHost.dll, version 17.351.6.52, time stamp 0x52fc12ed, exception 0xc0000005, offset error 0x000024a4, process 0x1d30 id code, failed to start the application time 0x01cf73e2c04f2ca1.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1000
      2
      100
      0 x 80000000000000
     
      110370
      Application
      Melanie-PC
     
   
   
      iTunes.exe
      11.2.0.115
      53755cb7
      AirTrafficHost.dll
      17.351.6.52
      52fc12ed
      c0000005
      000024a 4
      1 d 30
      01cf73e2c04f2ca1
   
  

  When I clicked on the link to the online help, I got was this:

  Details
  Product:	Windows operating system
  Event ID:	1000
  Source:	Application error
  Version:	5.2
  Symbolic name:	ER_USERCRASH_LOG
  Message:	Failed application %1, version 2 %, failed module 3%. version 4%, fault address 0 x %5.

  Hello

  Uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• Need help with 6 33 sidebyside event log error questions

  I did a complete reinstall of Windows Vista.  The event log showed mistakes aside nearby.   This is one of the six - sxstrace.exe used for the information:

  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = AMD64
  CultureFallBacks = en-US; en
  ManifestPath = C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Shfusion.dll
  AssemblyDirectory = C:\Windows\Microsoft.NET\Framework64\v2.0.50727\
  Application configuration file =
  -----------------
  INFO: Parsing file manifest C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Shfusion.dll.
  INFO: Manifest definition identity is shfusion, processorArchitecture = "X 86", publicKeyToken = "000000000000000", type = "win32", version = "1.0.0.0".
  INFO: Reference: Microsoft.VC80.CRT, processorArchitecture is "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "win32", version = "8.0.50608.0"
  INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "win32", version = "8.0.50608.0".
  INFO: Resolving reference for ProcessorArchitecture amd64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\amd64_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_09bcb209fad07c27.manifest
  NEWS: Policy redirected assembly version Editor.
  INFO: The Post policy assembly identity it is Microsoft.VC80.CRT, processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4016".
  INFO: Start the detection of assembly.
  NEWS: Try to detect manifest to C:\Windows\WinSxS\manifests\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_88dc01492fb256de.manifest.
  INFO: Manifest found at C:\Windows\WinSxS\manifests\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_88dc01492fb256de.manifest.
  INFO: End detection of assembly.
  INFO: Resolving reference Microsoft.VC80.CRT.mui, language = "*" processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "win32", version = "8.0.50727.4016".
  INFO: Resolving reference for ProcessorArchitecture amd64.
  INFO: Resolving reference for the en-US culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_64\Microsoft.VC80.CRT.mui\8.0.50727.4016_en-US_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
  INFO: Found no manifesto for the en-US culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_64\Microsoft.VC80.CRT.mui\8.0.50727.4016_en_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
  INFO: Did not manifest for culture.
  INFO: End detection of assembly.
  INFO: Parsing file manifest C:\Windows\WinSxS\manifests\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_88dc01492fb256de.manifest.
  INFO: Manifest definition identity is Microsoft.VC80.CRT, processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4016".
  INFO: Activation context Creation succeeded.
  End activation context generation.

  The installation of windows vista has been very successful... Thank you!  I did a factory restore... had some conflicts and massive updates to do.  Problem was trying to do updates, especially for pilots, before the accidents that happen.  I managed to do it.  The only questions I could solve just not have been SidebySides mistakes.

  Thanks to YOUR INSTRUCTIONS FANTASTIC all sidebyside errors are now missing from event viewer. :)

  In case you might be interested, here's the historical data for net framework cleanup tool:
  History of changes
  -------------------

  December 3, 2007 - created the history file; any changes made before the creation
  This file is followed.

  December 4, 2007 - additions of extra cleaning for all versions of the .NET
  Framework on Tablet PC / Media Center, all versions of the
  .NET framework on Windows Server 2003, and all versions of the
  .NET framework on Windows Vista / Windows Server 2008.

  January 23, 2008 - addition of registry values to remove .NET Framework 1.0
  and 1.1 patches that were previously left out.

  29 January 2008 - addition of the product codes for .NET Framework 2.0 SP1, 3.0 SP1, and 3.5
  RTM versions.  Added a few 3.0 and 3.5 directories that have been
  already be left on the system.

  February 4, 2008 - added the cleanup who were initially registered on jobs
  December 4, 2007, but was inadvertently deleted.

  March 5, 2008 - fixed problem of deletion of registry which may affect 64-bit operating systems.

  March 6, 2008 - fixed an error of advapi32.dll on some caused by the previous operating systems
  Difficulty.

  April 30, 2008 - codes added product .NET Framework 3.0 beta to the list of
  items to remove during cleanup of .NET Framework 3.0.

  June 5, 2008 - corrected a problem with recovery of the Windows directory
  systems with active Terminal Server Services.

  June 6, 2008 - adding a /u switch to allow to run in unattended mode (which
  Displays the progress page but no other Interface and will require
  no user intervention).

  June 9, 2008 - disable the readme file and log file buttons if the tool is underway
  run in unattended mode.

  July 22, 2008 - added logging for detection of version of .NET Framework.  Update
  the tool to set the title of the window in cleanup.ini.

  August 14, 2008 - added support for the .NET Framework 2.0 SP2, .NET Framework
  3.0 SP2 and .NET Framework 3.5 SP1.

  November 26, 2008 - fixed a logic problem that caused the cleaning tool for not
  Delete the values to register 32-bit on Windows 64-bit versions.

  December 22, 2008 - added the version string is added to the log file.

  July 24, 2009 - added logic to properly clean the .NET Framework
  Windows 7.
  Added detection and logging for the .NET Framework 4.
  Avoid cleaning of mscoree.dll on Vista and higher.

  October 27, 2009 - fixed problem of withdrawal associated with VC ++ runtime files on Win9x
  and Windows 2000.

  October 29, 2009 - fixed problem of withdrawal associated with runtime files in VC ++ in the
  %WINDIR%\WinSxS directory on some operating systems.

  November 30, 2009 - fixed some problems of deletion of registry values that control which
  products appear in Add/Remove programs.

  December 9, 2009 - added logic to treat some types of errors and warnings if the tool
  don't report breaking in some specific scenarios.  Added a few
  new files and to remove .NET Framework registry keys
  steps of cleaning 3.0 and 3.5.

  March 17, 2010 - force the process exit code to get spread
  for the self-extracting installation package.

  April 29, 2010 - added support to clean the .NET Framework 4.

  November 16, 2010 - added logic to clean the cache of .NET Framework 4 police service
  record.

  December 31, 2010 - add a logic of protection against infinite loops when the withdrawal of
  registry keys.

  January 17, 2011 - fixed a bug that prevented the .NET Framework 4 available
  as an option of cleaning on Windows Server 2003 (x 86).

  August 16, 2011 - fixed a bug that prevented mscoree.dll come off, on some
  x 64 versions of Windows.

  19 October 2011 - add a command line switch to allow users to force cleanup
  a version of the .NET Framework even if BONE conditions normally
  could stop him.  It is a switch intentionally undocumented
  and should be used only in rare cases where the user includes
  the impact.

  Thank you once again for a happy Vista user!

• 459 browser in the event viewer errors

  These errors have concocted 459 times in my the event viewr (it will probably be more in the moment where I get a response) what is it, and how to solve?  I use google chrome as my default browser, and it crashes all the time.

  
  

  The master browser has received a server announcement from the SIAK-PC computer that believes it is the master browser for the domain of transport NetBT_Tcpip_ {C6FC398A-D719-4F42-8CF7-E9615575EA2F}. The master browser stops or an election is forced.

  The master browser has received a server announcement from the computer PC ALEX who believes it is the master browser for the domain of transport NetBT_Tcpip_ {C6FC398A-D719-4F42-8CF7-E9615575EA2F}. The master browser stops or an election is forced.

  The master browser has received a server announcement from the computer OFFICEMAX023 PC that believes it is the master browser for the domain of transport NetBT_Tcpip_ {C6FC398A-D719-4F42-8CF7-E9615575EA2F}. The master browser stops or an election is forced.

  The master browser has received a server announcement from the IBM-A0U6WFXKY38 computer that believes it is the master browser for the domain of transport NetBT_Tcpip_ {C6FC398A-D719-4F42-8CF7-E9615575EA2F}. The master browser stops or an election is forced.

  The master browser has received a server announcement from the computer PC OWNER who believes it is the master browser for the domain of transport NetBT_Tcpip_ {C6FC398A-D719-4F42-8CF7-E9615575EA2F}. The master browser stops or an election is forced.

  
  

  There are also a bunch of warning dispersed among the errors that say my computer tried to say that it is the master browser, but this isn't.

  
  

  Hello

  Hard to say that Chrome has a tendency to be unstable for many. Do you get any error messages?

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------

  Do a Restore Point then you can recover if necessary (not that it should be necessary).

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ---------------------------------------

  Check this entry

  Start - type in search-> Regedit Search top - make a right click on - RUN AS ADMIN.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Browser\Parameters

  MaintainServerList Auto

  What other settings you have in this key? (there are others that we might need to compare).

  ==============================

  Easy to read Event Viewer Utility

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Event ID, errors, the description for event ID, 1307, 1312

  Hello

  I am getting following error messages inside my Application folder in the event viewer:

  The description for event ID (1312) in Source (ASP.NET 2.0.50727.0) could not be found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; See Help and Support for more details

  and also

  The description for event ID (1307) in Source (ASP.NET 2.0.50727.0) could not be found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; See Help and Support for more details

  Does anyone know how to remove them? Would be very happy to all general approaches, suggestions, ideas, comments etc...
  Thank you
  Colm

  Hi Selvavelan,

  As you mentioned that you use Microsoft Dynamic CRM 4.0, I recommend that you post your question in Microsoft CRM Dynamic support for assistance.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.