Windows 2008 standard R2 64 bit - issue event veiwer

Similar Questions

• Installing Oracle 11.2.0.2 64 bits on 64-bit Windows 2008 standard

  Getting an error of architecture during the pre-checks:
  Architecture - it is a prerequisite to check if the system has a certified architecture.
  Expected value
  : 64-bit
  Real value
  : 32-bit
  List of errors:
  -
  PRVF-7535: proper Architecture is not found on the node 'WS8-DBATEST' [expected = "64-bit"; Found = "32-bit"] - Cause: the system architecture does not respect the requirement.  -Action: Make sure the correct software bundle is used.
  
  It's in a test VM environment as we prepare to move to 64-bit. The server is windows 2008 standard and the AMD64 family 16 processor model 9. I checked the operating system is 64-bit by running Winver and verified that the processor is a 64-bit running systeminfo. What Miss me?

  Workaround for this bug is to install the 64-bit first then install the 32-bit. This bug is still in development by the development and it's the only solution

  Published by: PavanG on September 30, 2011 08:35

• How will I know? Server 2008 standard 32/64 bit is legitimate

  I bought Server 2008 standard 5 CAL 32/64 bit some time ago, but I just installed it.

  I broke the seal (cellophain) plastic and seal of security and the open the plastic box where he had two DVDs and "getting Started" guide. The activation code (tag) was in place.

  But after installing and trying to activate the product via the Internet, he said that the code was already in use. I unplugged the network cable for the "other" ways to activate and tried the phone and he said: "the product was not valid" after reading all numbers to the phone machine.

  How can I really know if this IS a genuine copy? Without buy directly from Microsoft. It seems legit to me, it's the same as what is on the shelf at Fry's electronics. If I knew how to send a page here I would take a photo of the box, to show you...

  Hello

  read the information below to check validation

  http://www.Microsoft.com/genuine/validate/validatenow.aspx

  Here is the vista forums

  for any other question of server, try Server Forums

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb310558.aspx

• Get Windows 2008 Standard FE?

  Hello

  One of our customers recently their RAID array fails and we need to reinstall the operating system. The system has a CoA OEM for Windows Server 2008 Standard FE (Foundation Edition), but we have not all discs.

  Given that FE is OEM, it's probably like pulling teeth getting a copy of the software, but I'm curious to know if it is possible to do.

  All comments (and quickly) would be extremely useful.

  Thank you!

  Contact Dell Support. It is unlikely that they filter replacement for her. OEM media will pop up from time to time on eBay, but Foundation is not very common, so you won't find it here. MSDN is probably the only place where you will find media for her... crazy, it would be cheaper to buy a new OS.

• Get errors when you try to activate Windows 2008 Standard Server

  I upgraded my server from Windows 2000 to Windows 2008. When I try to activate Windows, I have the error first:

  Activation error: Code 0x8007232b
  DNS name does not exist
  So find kbase ID of Article: 929826
  http://support.Microsoft.com/kb/929826
   
  Tried to load my product key again from the command prompt:

  slmgr - ipk

   

  Now I get error:

  0xC004C003 error code
   
  the activation server determined that the specified product key is in use

  This forum is not compatible Windows Server, you need to create a new post on the TechNet forums for assistance: http://social.technet.microsoft.com/Forums/en-US/winservergen/threads

• Always get errors when you try to activate Windows 2008 Standard Server (0xC004C003 error Code)

  I upgraded my server from Windows 2000 to Windows 2008. Initially when I try to activate I get the error:

  Activation error: Code 0x8007232b
  DNS name does not exist
  So find kbase ID of Article: 929826
  http://support.Microsoft.com/kb/929826
   
  Tried to load my product key again from the command prompt:
  slmgr - ipk
   
  Now I get error:
  0xC004C003 error code
   
  the activation server determined that the specified product key is in use

  I went through all the information on product activation, sought help windows, answers, google, still cannot find how to solve this problem.

  Made through the Windows Server 2008 Product Activation helps too.

  I don't want to go beyond the 90 days for activation and started having problems with my Windows Server!

  Please repost your request in the most appropriate Forums of Windowsserver.  Thank you.

• Can I download windows 2008 server R2 64 bit Bill through the Internet.

  I bought the copy at retail of windows server 2008 R2 64-bit x. and I send out countries but Server 2008 Media Server is here in India. I want to install this product on this server what can I do. ? can I download the support from the operating system through the internet in its place. ?

  media is here and server in the other place and he wants intallation with in 2 days and I can send media can I download os across the net.

  Help me for this matter.

  No, you can't downloadit. You must purchase the appropriate version.

  Windows Server forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• I understand that DB is made as data files, etc.  But what size max in Windows 2008 R2?  64-bit Linux?

  How big can these data files, files redo log can be a Max?

  Maximum size of file (Ext3) 2 TB 2 TB 2 TB
  Maximum filesystem size (Ext3) 2 TB 8TB to 8TB/16 (16 TB in 5.1)
  Maximum size of file (GFS) 2 TB 16TB/8EB 16TB/8EB
  Maximum filesystem size (GFS) 2 TB 16TB/8EB 16TB/8EB

  X 86 maximum about 4 GB per process virtual address space about 4 GB about 3 GB

• ColdFusion will not install on a Windows 2008 Standard Server for IIS 7.0 running in VMWare.

  In the final step "Configure Web servers/websites", he complains that - "cannot configure IIS Connector. Select the required options, ASP.NET, CGI... ».  But, ASP.NET, CGI, and ISAPI all connectors are installed and configured.  We installed Coldfusion on more than 40 servers, since version 7 to 11 and that you have not seen this problem before.

  Hi Jim,.

  You get this error only if the IIS features above are not installed. I'm sure you launch the web as an administrator, even though server configuration tool that shouldn't contribute.

  Can you take a screen shot for these IIS features and share.

  Kind regards

  Anit Kumar

• Windows 2008 Server Standard not install KB3099860 with error code 8000FFFF

  Hello

  I look after 3 x Windows 2008 Standard Edition servers. Two of them to date very well and are up to date with updates. One of them however, which is identical in hardware to either of the other two and even fewer programs (we use it as a simple file server), fails on the last update released December 2015:

  KB3099860 a security update for the .NET Framework 3.0 Service Pack 2 in Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2: 8 December 2015

  I tried a variety of things after having studied the problem these past few days, including:

  1 Uninstalling some updates before this one and see if they re - install. They are all re - install fine until I get to it where it fails with 8000FFFF error code so this leads me to believe that this is not in itself a problem with updates

  2. manually and also linking this Microsoft 'fixit': http://windows.microsoft.com/en-us/windows-vista/windows-update-error-8000ffff

  3. how to install the System Update Readiness Tool for Windows Server 2008 that installs but does not report errors

  4. manually by downloading the fix and trying to install - does not work.

  5. all the details here: https://social.technet.microsoft.com/Forums/windowsserver/en-US/ae6e81e9-5c49-4826-89bc-04a676992706/error-8000ffff-windows-server-2008?forum=winservergen

  including rename them the folder C:\Windows\SoftwareDistribution Windows Update and giving of right on drive C for "Network Services" - still does not work.

  6. as it is associated .NET I tried to repair .NET facilities that exist on the server (2, 3, 3.5 and and re-apply updates, but even once, fails on it.)

  So, what should I do now? The behavior may suggest that it is that only this particular associate .NET that is a failure and that future ones will work, but it's "critical" and which relates to the .NET version which is initrinsic to the Windows 2008 operating system I think I should get it fixed :)

  Any thoughts?

  Thank you

  Dan

  You need to ask this Technet as they manage the server issues:

  https://social.technet.Microsoft.com/forums/WindowsServer

  hope that helps

• Agent Extension SNMP event log has not initialized properly in windows 2008 R2

  I enabled the functionality of SNMP Service and found the following error:

  "Error 2019: Extension SNMP event log Agent has not initialized properly in windows 2008 R2 Enterprise 64-bit.

  I uninstalled all related SNMP Applications and reinstalled the functionality of the SNMP Service, however, I always do face the same error.

  According to the following of Article http://support.microsoft.com/kb/128729 , this requires to contact microsoft to obtain the fix.

  I have a subscription with Microsoft technical support to download the fix mentioned the article above.

  Any help please,.

  Hello

  The question you posted would be better suited in the community pro Windows 2008.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Performance problems on Oracle 11 G with Windows 2008 64 bit.

  Hello world
  
  I noticed that our database is going bad and low every week. My server has 16 GB of RAM and 10 GB are dedicated to the database Oracle, it is a 11.2.0.1 with Windows 2008 R2 SP1 64 bit. I would like to know according to the values of the movement following you guys recommend to adjust in the init.ora:
  
  ORCL.__db_cache_size = 5402263552
  ORCL.__java_pool_size = 33554432
  ORCL.__large_pool_size = 33554432
  ORCL.__pga_aggregate_target = 3657433088
  ORCL.__sga_target = 6878658560
  ORCL.__shared_io_pool_size = 0
  ORCL.__shared_pool_size = 1308622848
  ORCL.__streams_pool_size = 33554432
  
  * .memory_target = 10511974400
  * .open_cursors = 5000
  
  * .optimizer_mode = "RULE".
  * runoff = 300
  
  According to the target memory on how values can be increased the process, pga_agregate_target, etc.
  
  We also have problems with the bug Bug 9593134 "connection to Oracle 11 g are slow and can take anywhere from 10 seconds to 2 minutes." there is a difficulty on linux by removing dns names on this subject, but someone has experience on windows platforms?
  
  Thanks to all and sorry for my English.
  
  Kind regards.
  
  Arturo.

  Concerning the long connection times, have you tried to use the network (such as Wireshark) packet capture software to determine that the client computer when a connection attempt is initiated?

  The Oracle database time can help the model statistics and wait events extensive system you diagnose performance problems related to poor (you should not only look at the statistics, but rather capture the current values, wait a while, statistics capture again and compare the evolution of the values of the statistics). A statspack report may also help - but a trace 10046 to level 8 or 12 is more appropriate if you are able to identify a few sessions that have performance problems.

  I claim not just blindly changing the settings, even if I'm curious about:
  * Why the session level setting OPEN_CURSORS is set to 5000 - you expect a single session to hold cursors open 5,000?
  * Why do you use the obsolete RULE based optimizer?
  * Why the MEMORY_TARGET parameter is used when the target SGA_TARGET and PGA_AGGREGATE are specified?

  Charles Hooper
  http://hoopercharles.WordPress.com/
  IT Manager/Oracle DBA
  K & M-making Machine, Inc.

• 64-bit Windows 2008 server host ESX3i

  have a special service that is its own LAN being created.  Completely isolated from the rest of our VI3 infrastructure.   The Department has a host of Dell 32 bit and bought a 64-bit host.   They put on 64-bit host Windows 2008 Standard and that you want to install ESX3i on their 32-bit host because it has 16 GB of memory and the 600 GB drive.   They do not want to spend a lot of money, but it takes a business continuity solution.  Their idea is: use the 32-bit host as a host VMware ESX3i and clone the Windows Server 2008 64-bit as a VM on the 32-bit host ESX3i.  They will do it on a regular basis.  However, there is another idea which they are seized - to buy a license to protect Platespin and perform conversion to protect from the physical server 64-bit to host 32-bit ESX3i on a regular basis (am said that this is possible through PlateSpin).

  Apart from the possibility of Platespin, the real question is: a 64-bit Windows 2008 host can be cloned as a virtual machine to a 32-bit host ESX3i?  If so, this may be a solution for them.

  ESXi can be installed on a x 32 hardware host little but if you need to virtualize x 64 virtual clients, then your material must be x 64 bit compatible.  I'm curious to know if this Platespin product would mask the x 64 requirements that would be cool.  You have to confirm with Platespin sales about your situation before that you want to allow?

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant

• Oracle Forms 11 g Windows 2008 R2 64-bit - cannot download the Addon

  Hi Fusion Middleware Admins,

  Installed Oracle WebLogic 11 g (10.3.6) 64-bit on Windows 2008 Release 2 64-bit and above which installed and configured Oracle Forms and reports 11 g R2 (11.1.2.2.0).

  I get the following error when accessing the Test URL in the forms using Internet Explorer 8.  URL:http://hostname:portno/forms/frmservlet

  An add-on for this Web site has failed. Check the security settings in the Internet Options of potential conflicts

  The URL added to the list of trusted site and activate all parameters activex inside the Security tab of Internet Options. Nothing has worked.

  Please provide your valuable contributions on it.

  Thank you

  Salih

  Problem solved. I've accessed the URL using Internet Explorer 8 64-bit and it worked.

  Thank you

  Mohamed Yusuf Salih

  Senior Oracle DBA

• Windows 2008 Enterprise Edition to recognize the more 2.1 TB hard drive?

  I have several questions:

  1. I have Windows 2008 Enterprise 32-bit Edition and not to recognize the more 2.1 TB hard drive.  What should do to recognize the hard drive?

  2. There are Windows 2008 Standard Edition R2 32 bit?

  3. it is possible to update Windows 2008 Enterprise Edition 32-bit on Windows 2008 Enterprise Edition R2 32 bit?

  Thank you.

  Support Windows Server is in the server instances, these forums are for individuals.  Try rather questions here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer