Event Viewer has perflib and repeated pc blue screen error

Similar Questions

• Computer guard stop and causing the blue screen Error Message

  With the help of a Dell Vostro 200 with Windows XP Professional.  Suddenly, after you have moved the computer from one office to the next, she regularly stops and we get this blue screen that says:

  Technical information:

  STOP: 0X000000D1 (0 X 00000060, 0XAA2AD341, 0000002 0 X, 0 X 0000000)

  WUSB54gcv3.sys - address AA1AD341 base at AA15B000, Datestamp 48 b 66753
  Beginning physical memory dump
  Total physical memory dump
  For more assistance, contact your administrator or technical support group.

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  Drive_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this Stop error screen, restart your computer.  If this screen appears again follow these steps:

  Make sure any new hardware or software is installed correctly.  If it is a new installation, ask your hardware manufacturer or software, the Windows updates, you might need.

  If the problem persists, disable any newly installed hardware or software, disable memory options such as caching or shadowing the BIOS.  If you need to use Mode safe mode to remove or disable components of your computer restarts, press F8 to select advanced startup options, and then select Safe Mode.

  Can anyone help?  I installed an update of the necessary BIOS and that did not help and the computer is configured to have Windows Installer automatically what is updated, it needs.

  Thank you.

  Pages 29 and 30

  http://support.Dell.com/support/eDOCS/systems/ins9300/en/OM/om_en.PDF

  Hope this helps, Gerry Cornell

• Blue screen error caused by display driver igfx

  Origin: the title display driver igfx

  My Toshiba Satellite L305-S5907 started suddenly to do all kinds of crazy stuff, the screen was all distorted and it flickered and then it would break.  Then I had received a message indicating that the screen was confronted with a display driver igfx problem and had been recovered.  This has happened about 5 times and I was trying to see if I could get some info on the help and support page, and then the screen went black.  Now my laptop won't open at all.  I pressed the button 0 and holding it down and then through this recovery process and it will get so far and then a blue screen error appears and says that he is arrested for not to damage my laptop.  It is as far as I can get and it won't let me on my computer to get to the control panel or to download updates.  How can I return to my laptop to download the updates?

  Hi Tempol,

  Since then, you receive a bluescree and unable to boot in normal mode, you can try to boot from the Windows Vista full version installation disc and perform a startup repair.

  If restarting fails, then try a startup to restore the system from the installation disc.

  For more information, you can consult the following articles:

  What are the system recovery options in Windows Vista?

  Startup Repair: frequently asked questions

  Hope this information is useful.

• Blue screen error: 0x0000001a when using system to restore with new hard drive disk

  original title: blue screen error when you use the system disk to restore with new hard drive

  I bought a new hard drive to my computer because the old one gave me a bunch of error messages on screen blues. I installed in the tower and tried to use my restore and system recovery disks that the manufacturer has given me, the process has got to the last disk then asked for the system once again restore disc, and then began to load the last steps and went to blue screen error. I don't know what to do, I mean it's a whole new drive hard, so where could the error come, theres nothing on the hard drive because I have not yet used really, yet. Help, please

  I have finally fixed the problem myself. The problem was that one of the sticks three memory was bad and the only way I could test this error. I took two sticks a left, used disks I had and was able to restore my computer, then I put a stick, turned on the computer, had no errors so I let him, so I put the last stick in and com immediately on, I had the Disconnections: memory management and that's when I knew that the last stick of memory was bad I took it back and now my computer works well and I can't buy more memory for not too. So if someone gets this BOSD error on memory, I'd say 8/10 computers have bad memory (not a number). If youcannot run the tool of diagnosis of memory like me then I would suggest to do what I did with the trial and error, it was the only way to understand the problem. Thanks for your help

• My vision of photoshop is too large with small buttons. The view has changed and I would like to go back to the way it was.

  My vision of photoshop is too large with small buttons. The view has changed and I would like to go back to the way it was.

  Change the scale of the user interface in the preferences at 100%:

  

• Why am I repeatedly a blue screen?

  Yesterday, I started to have the blue screen of death while message on internet.  It happened several times in the last two days.

  Part of the message says * STOP: 0000001E (0xFFFFFFFFC0000096, 0xFFFFF80002CA6EEA, 0 x 0000000000000000, 0 x 0000000000000000)

  Any ideas?

  Two days ago my computer (HP) had me to perform an upgrade.  I think that has to do with that.

  Thank you

  Jerimiah

  Hello

  Check with HP Support, their drivers and documentation online and ask in their forums
  known with these updates or any other hardware or software issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ===========================================================

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ========================================================

  BCCode: 1st 0x0000001E

  Remove ALL power and reinstall all the memory cards and cables (both ends when)
  possible) - in fact, remove and replace - do not just tight. This is for a PC and on all
  that can be done for a laptop is reinstall the memory and clear the vents. Make sure the BIOS.
  low level chipset drivers and key device drivers are all up to date by check manually to the
  manufacturer websites.

  Bluescreens many are caused by the BIOS, drivers low-level chipset and other major device
  drivers that are not the latest, even if the computer is new. Check manually
  updates using the methods of updates as indicated in the resolution of the problems above
  and/or the following methods (which are the same).
  
  
  BCCode: 1st 0x0000001E

  Bug Check 0x1E: KMODE_EXCEPTION_NOT_HANDLED

  KMODE_EXCEPTION_NOT_HANDLED bug control has a value of 0x0000001E. This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  KMODE_EXCEPTION_NOT_HANDLED parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The code for the unhandled exception
  2	The address at which the exception occurred
  3	Parameter 0 of the exception
  4	Parameter 1 of the exception

  Cause

  It is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes include:

  • 0 X 80000002: STATUS_DATATYPE_MISALIGNMENT

    An unaligned data reference was encountered.

  • 0 X 80000003: STATUS_BREAKPOINT

    A breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0XC0000005: STATUS_ACCESS_VIOLATION

    A memory access violation has occurred. (Parameter 4, verification of bug is the address to which the driver attempted to access.)

  For a complete list of exception codes, see the ntstatus.h file located in the directory of the Windows Driver Kit inc.

  Resolution

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques. If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates. Try changing video cards. Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading.

  
  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, this indicates that a breakpoint coded hard or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame will provide additional information.

  If you don't know the specific cause of the exception, the following should be considered:

  
  Hardware incompatibility. First of all, make sure that all new equipment installed is compatible with the installed version of Windows. For example, you can get information about compatibility with Windows 7 in the Windows 7 Compatibility Center.

  
  Service system or driver faulty device. In addition, a chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, the service may be removed by the system startup by using the Recovery Console and by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help determine the device or driver responsible for control of bug 0x1E. Disable the cache in the BIOS memory could also resolve the error. You must also run hardware diagnostics, especially the scanner memory, provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is incompatibility of the system BIOS. BIOS problems can be solved by upgrading the version of the system BIOS.

  To get a stack trace, if the normal battery monitoring procedures don't

  1. Use the command Ko (display Stack Backtrace) to display the parameters from the stack trace. Look for the call to NT! PspUnhandledExceptionInSystemThread. (If this function is not listed, see the note below.)

• The first parameter of NT! PspUnhandledExceptionInSystemThread is a pointer to a structure that contains pointers to an except statement:
  Copy

  typedef struct _EXCEPTION_POINTERS {PEXCEPTION_RECORD ExceptionRecord; PCONTEXT ContextRecord; } EXCEPTION_POINTERS, * PEXCEPTION_POINTERS; ULONG PspUnhandledExceptionInSystemThread (IN PEXCEPTION_POINTERS ExceptionPointers)

  Use the command dd (display memory) to this address to view the data.

• The first value retrieved is an exception record and the second is a context record. Use the command .exr (display Exception record) and the command .cxr (display context record) with these two values as arguments, respectively.

• After running the .cxr command, use the kb command to display a stack trace which is based on the registration context information. This stack trace indicates the call stack where the unhandled exception occurred.

Note  This procedure assumes that you can locate NT! PspUnhandledExceptionInSystemThread. However, in some cases (for example an access violation crash) you will not be able to do. In this case, to look ntoskrnl! KiDispatchException. The third parameter passed to this function is a trap frame address. Use .trap (trap Display frame) with this address to define the context of registry to the correct value. You can then perform the stack traces, issue other commands.

Here is an example of bug 0x1E on an x 86 processor control:

Bug_Check 0x1E - read link for the example
http://msdn.Microsoft.com/en-us/library/ff557408 (v = vs. 85) .aspx

BCCode: 1st 0x0000001E<-- read="" this="">
* 1045.html http://www.faultwire.com/solutions-fatal_error/Check-to-be-sure-you-have-adequate-Disk-Space-0x0000001E-

==========================================================

References to Vista also apply to Windows 7.

It's my generic how updates of appropriate driver: (main drivers and BIOS)

This utility, it is easy see which versions are loaded:

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.

Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

==========================================

Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also glue in and out to check for those, even if all the tests of memory do not respond
a problem.

To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.org

For the Windows Memory Diagnostic tool.

Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
RUN AS ADMIN follow the instructions

Windows Vista: How to scan / test your RAM or memory with Windows Vista Memory Diagnostic
Tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

How to run the diagnostic tool memory in Windows 7
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Get the blue screen error saying windows has shut down to prevent damage to this computer

  My sons computer is BLUE with a message saying that windows was arrested for not to damage your computer. And it is stuck on that screen. Do you know why windows shuts down his computer?

  * original title - my son computer is blue and a message indicating that windows has stopped to avoid damaging his computer. And he is not able to do anything. Do you know what it is? *

  Hello

  1. what operating system is installed on his computer?
  2 did you the hardware changes to his computer before the question?

  Perform the steps in the article and see if the problem is resolved or not.
   

  Resolve stop (blue screen) error in Windows 7

  Also check the event viewer for error logs

  Open event viewer

  What are the information contained in the logs of the event (Event Viewer)?

• How to troubleshoot and resolve the blue screen (STOP: 0x000000F4 (0xFFFFFA800BCF4B30, 0xFFFFFA800BCF4E10, 0 x 000000000000003, 0xFFFFF800031D4460)) questions for new construction

  I just finished a new construction, including Windows 7 Home Premium 64-bit.  Update all the drivers went through, and now I get BSOD.  Initially, I'd get them, after that the system wake up to 'sleep' mode, but this morning I received after you start the computer from the closure.  They are the mistakes STOP F4, and I'm sure that there is a way to fix them, I just need help on where to start.  After a few reboots to check the version of the BIOS and what not, the computer would no longer connect to the internet.
  Here is my configuration:
  CPU: Intel Core i3-3225 3.3 GHz Dual - Core Processor
  Motherboard: ASRock H77M Micro ATX LGA1155 motherboard
  Memory: G.Skill Ripjaws X Series 8 GB (2 x 4 GB) DDR3-1600 memory
  Storage: Intel 330 series 240GB 2.5 "Solid State Disk
  : Fractal Design Arc Mini Micro ATX mini-tower case
  Power supply: Rosewill Capstone 450W 80 PLUS Gold Certified ATX12V / EPS12V power supply
  Optical drive: Lite-On iHAS124-04 DVD/CD burner
  Operating system: Microsoft Windows 7 Home Premium SP1 (OEM) (64-bit)
  Other: 2 x Western Digital Caviar Blue 500 GB 3.5 "7200 RPM hard drive internal

  And here are two mistakes STOP I was able to capture up to now:
  STOP: 0X000000F4 (0XFFFFFA800B938B30, 0XFFFFFA800B938E10, 0 X 000000000000003, 0XFFFFF80002F80460)

  STOP: 0X000000F4 (0XFFFFFA800BCF4B30, 0XFFFFFA800BCF4E10, 0 X 000000000000003, 0XFFFFF800031D4460)

  This was my first computer build and I really enjoyed until the software part; simply too many current intangibles.  A lot to learn and I'm happy to do, but my wife would like a stable computer.

  Original title: how to troubleshoot and resolve problems blue screen for new construction

  Hello

  Bug_Check F4 is generally hard, cables, and associated hard drive controller.

  Since this is a new construction House remove ALL power - reinstall all memory cards and cables (on
  both ends where possible) - actually delete and replace - do not just tight. Make sure heat
  sink and compound are correctly placed and that all lovers of work.

  Check with the ASRock support, their documentation online, the diagnosis and ask in their forum
  for problems known.

  ASRock - Support
  http://www.ASRock.com/support/index.asp

  ASRock - Forums
  http://www.ASRock.com/support/forum.asp

  ASRock - downloads
  http://www.ASRock.com/support/download.asp

  =============

  See this article:

  You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when
  you try to resume a computer that has a large hard drive SATA.
  http://support.Microsoft.com/kb/977178

  -----------------------------------------------------------------------------------------------------------

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ================================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) in fact
  delete and replace - do not just tight. On a laptop computer on all you can do is reinstall it
  memory and possibly check the connection/contacts on the hard drive. Memory could
  be the problem, so if you have more than 1 stick swap them in and out to see if the
  problem follows a stick or try the new memory. Antivirus/anti-spyware/security programs
  have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other control
  software.

  Also check the wiring on the hard drive.

  =========================================================

  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION

  CRITICAL_OBJECT_TERMINATION bug control has a value of 0x000000F4. This indicates that a process or thread crucial to system operation has unexpectedly is released or ended.

  Important info if you received a STOP Code
  

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  CRITICAL_OBJECT_TERMINATION parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The Terminal object type: 0x3: Process of 0x6: Thread
  2	The endpoint object
  3	The name of the process image file
  4	Pointer to a string ASCII containing an explanatory message

  Cause

  Several processes and threads are necessary to the functioning of the system. As they are completed for some reason, the system can no longer function.

  BCCode: F4 0x000000F4<-- read="" this="">
  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  ==================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant
  (also, Windows 7 and Windows 8).
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen
  of death "crashes and displays the information about all crashes in one
  Table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista (also Windows 7) Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have problems turning on my computer, sometimes I have it turn on and off the hard path of startup. Because it goes to the system again and then a blue screen. What is the hard drive?

  I have to leave my computer on to avoid having to turn it off with the power off button.  Otherwise, I have to turn on & off with the power button.  When I do that he will go to start windows normally or delete files and go to the system restore. When I hit windows normally it will go to a blue screen with the cursor at the top left doesn't Flash and that's it.  So, I press the power button to continue until initialization starts normally.

  Hello

  1. You did it last changes before the show?
  2. What is the error message/code what do you see with the blue screen?
  3. What is your operating system?
  4. Are you able to boot to the desktop?

  The steps below apply to Windows 7:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: Make sure that you back up your data.

  Important: The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

  Step 2) click on the link below to provide newspapers:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Step 3: Run a virus scan:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  It will be useful.

• System unexpectedly stop restart and go to the blue screen "error code 0141.

  Original title: error code

  my lap top is suddenly happened to bluescreen, shut down and then after reboot, one, (error code 0141), appears. can you please tell me how to fix this?

  Hello

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description, it looks like you have a problem with Windows Vista, getting automatically restart with a blue screen.

  He would be grateful if you can answer this question in order to help you further.

  1. have you made changes on the computer before this problem?
  2 what happens while accessing any special request or programs?

  I suggest you to check the information contained in the event logs? (Event Viewer)

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Perform a clean startup will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows vista: http://support.microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly: http://support.microsoft.com/kb/958233

  Resolve stop (blue screen) errors in Windows 7 (similar to a few steps of the mentioned below, the section applies to windows vista): http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

  Notes:

  When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Before you perform the upgrade installation, I recommend you back up your files using windows backup.

  We would be more than happy to help you if the steps above did not solve the problem.

• My computer crashes from time to time, and sometimes I have the blue screen errors.

  I am running Win 7 on a 2 years old HP Pavilion. I started having occasional blue screen errors, and some applications are a little weird. I haven't added anything recently except the recommended Windows updates. Now when I try to stop, it just display the closing, and I pressed the power switch. I tried to restore to an earlier time a few times in the last 90 days. Suggestions, or I need to reload Windows? If a reload is correct, can I charge for the recovery through my recovery cd partition?  My processor is an AMD Phenom 2.90 GB with 4 GB of ram, Win Home Premium software. Thank you... Joe

  I think that your problem is related to your wireless network connection.

  Send a copy of your dumpfile as a shared folder on your drive of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  To get tips on how to configure your system to create dump files please read:
   http://support.Microsoft.com/kb/254649

  The dumpfile will be created in c:\windows\minidump. You may need to change your settings in Windows to be able to view the file. To show hidden files type Folder Options in the search box above the Start button and select view advanced settings and check that the box "display files and folders" and 'Hide protected operating system files' are not checked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.

  Please download and run the display driver and download a copy of the report he produced on your sky player
  http://www.NirSoft.NET/utils/DriverView.html

  Please download copies of your system logs and Application of your event viewer on your sky drive and post a link here.

  To access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, select the Action in the Menu and record all events as and give the file a name. Do the same for the application log.

• When you've been a long game my system hang and see a blue screen?

  When you've been a long game my system hang and see a blue screen?

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Hope this helps, Gerry Cornell

• 1000008e and blue screen errors c5

  Hi someone can help me with blue screen errors? I get them all a few days or more. I tried to update some drivers for my laptop (Dell Inspiron 1545)

  and I always do those windows when they appear.

  The two that I got today are:

  Product
  Windows

  Problem
  Stop unexpectedly

  Date
  10/01/2011 13:43

  Status
  Solution available

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini100111 - 02.dmp
  SysData. XML
  Version.txt

  Additional information about the problem
  BCCode: c5
  BCP1: 01FFE68C
  BCP2: 00000002
  BCP3: 00000001
  BCP4: 8C12E010
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: 03ef9b1f-2a5a-45e3-b3a6-5fd007644934

  1 today:

  Product
  Windows

  Problem
  Stop unexpectedly

  Date
  10/01/2011 11:43

  Status
  Report sent

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini100111 - 01.dmp
  SysData. XML
  Version.txt

  Additional information about the problem
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 8 128770
  BCP3: BF7AD7FC
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: 8864aed8-7896-422f-b5d6-99e51972bfc1

  Thank you

  Gill

  Hello GMS611,

  Looking at the Dell site for the error that you specified, you have confirmed that all drivers, firmware, and BIOS are updated? Are you getting this error when you start?  I want to confirm you are updated and then run a check disk as Abdul suggested.  Please let us know status.

  Dell support:

  http://support.Dell.com/support/downloads/DriversList.aspx?c=US&CS=19&l=en&s=DHS&ServiceTag=&SystemID=INSPIRON1545&OS=WLH&OSL=en&CATID=&impid=

  Thank you

• Get the blue screen Error Message: 0x116_TdrBCR:2_Tdr:2_IMAGE_nvlddmkm.sys and Vista crashes

  Original title: crashing in Vista, something with the drivers I think

  At startup, I see a message that says: Media test failure.  I can sometimes to vista in normal mode, but then it's a matter of time (not too long usually) before the screen flickers and goes black.  I then turn off the power and restart.  Once it says graphics driver NVIDIA has stopped working properly, I've updated my driver and now it says it's working properly, but I still have the same problem.  My bucket of blue screen error is: 0x116_TdrBCR:2_Tdr:2_IMAGE_nvlddmkm.sys any help will be greatly appreciated

  Hi zambetti,.

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This error indicates that an attempt to reset display driver and recover a timeout failed.

  Check out the link:

  http://msdn.Microsoft.com/en-us/library/ff557263%28VS.85%29.aspx

  Since you've already tried to update the Nvidia drivers, you can try to uninstall and reinstall the same check.

  You can try to uninstall and reinstall all the programs and features Nvidia drivers and Device Manager.

  Step 1:

  Uninstall the audio drivers from programs and features

  a. click on start

  b. type appwiz.cpl in the start search

  c. search for all driver packages, Nvidia, right click and uninstall.

  Step 2:

  Uninstall the drivers from Device Manager.

  a. click on start

  b. type devmgmt.msc in search, and then press enter

  c. in find Manager device for the device, right-click on it and select the option uninstall.

  After you remove the drivers of these two places, you can try to remove the NVIDIA folder and restart to see if that solves the problem after I installed the generic drivers.

  Step 3:

  To delete the folder:

  one. Click on start and Type C:\windows\system32\drivers folder in start search

  b. click on drivers and select nvlddmkm.sys

  c. right click and rename nvlddmkm.sys in nvlddmkm.sys.old. or delete.

  d. restart the computer and check.

  You can also check the manufacturer's website and download the latest drivers from Nvidia:

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 2 errors cannot start the file missing PSHED.dll and a blue screen error 0x0000C1F5

  Hello

  A few moments ago I had to do a restore of the system for some reason forgotten but restoring interrupted when the power off when I tried to restart it gave me a chioce of such boot options that start normally start SafeMode etc... but when I choose one of them it is said that the PSHED.dll file is missing or currput so I put in my drive repair/install and reboot, but after the white bar has loaded and the green bar loads, it gives me a blue screen error with the info tech being 0x0000C1F5 and the rest are zero

  I have a gateway with windows Home premium 32-bit model and more recent material I instaled a grapics card xfx 9800gt nvidia and a new mouse, any help would be appreciated thanks

  -Renton

  Hello

  This error is somehow a special case:

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
  http://support.Microsoft.com/kb/970101/en-us

  Stop error when you start a Windows Vista-based computer, even though hotfix 946084 is installed on
  computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/958069/en-us

  Other methods:

  Workaround for STOP 0x0000C1F5 / 0xC1F5 / C1F5 / BSOD / CLFS. SYS / KB946084
  http://www.delmartian.com/nullpointers/workaround-for-stop-0x0000C1F5-0xC1F5-C1F5-BSOD-CLFS.sys-KB946084.html

  Easier to read same message
  http://BSODs.com/content/Windows-Vista-and-stop-0x0000C1F5-Linux-anyone

  SystemRescueCd
  http://SysRescCd.org/Main_Page

  Video fix
  http://www.YouTube.com/watch?v=Y_OjCkbZyTw

  Video Fix - Linux
  http://www.YouTube.com/watch?v=SwSvIhyZRVc

  ================================================

  For the most part, the BlueScreens (the above is a special case as noted)

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.