Events when the application starts

Similar Questions

• Event when the application closes

  Hi *.

  is there an event when the PlayBook application is about to close? I would like to save at this time where the configuration etc.

  Not that I know of.  It will be an event at the level of the AIR that is triggered when this problem occurs, and I do not think that such an event is currently on the Tablet OS.

• Mobile project database, SQLite, replaced when the application starts

  It is a mobile application for Android. I created a small database in which I want to store the user's preferences. Unfortunately, the database is deleted whenever the application is started in debug mode. This happens without code running at all.

  The other strange thing is the database then gets recreated when my complete Manager of creation came, before a single line of code is executed. You can see in the code depending on whether it is where I start to use the database, but then again, the database is being destroyed and recreated before this code is reached.

  Result: I lose anything stored in the database.

  Any ideas why this happens?

  <? XML version = "1.0" encoding = "utf - 8"? >
  < s:View xmlns:fx = "http://ns.adobe.com/mxml/2009".
  xmlns:s = "library://ns.adobe.com/flex/spark".
  title = "HomeView.
  creationComplete = "view1_creationCompleteHandler (event)" >

  Remove creationComplete property, above and then just by running the application in debugging removes the database stored, without executing the function below.

  
  < fx:Script >
  <! [CDATA]
  Import mx.events.FlexEvent;
  public var sqlc:SQLConnection = new SqlConnection ();
  public var db:File;

  If this function is entered, the "Local Store" folder (under the applicationStorageDirectory),
  and the database are deleted.

  protected function view1_creationCompleteHandler(event:FlexEvent):void {}
  
  stopping the trace statement following will always be to re-create an existing database.
  even if end you the session of debugging is stopped at this point.
  trace();
  
  DB = File.applicationStorageDirectory.resolvePath ("MyDatabase.db");
  Add the new headphones for attempting to open read/write:
  sqlc.addEventListener (SQLEvent.OPEN, open_db_read_write_RESULT_event_handler);
  sqlc.addEventListener (SQLErrorEvent.ERROR, open_db_read_write_ERROR_event_handler);
  sqlc.openAsync (db)
  }

  private void open_db_read_write_RESULT_event_handler(event:SQLEvent):void {}
  trace();
  Remove the headphones:
  sqlc.removeEventListener (SQLEvent.OPEN, open_db_read_write_RESULT_event_handler);
  sqlc.removeEventListener (SQLErrorEvent.ERROR, open_db_read_write_ERROR_event_handler);

  }

  private void open_db_read_write_ERROR_event_handler(event:SQLErrorEvent):void {}
  trace();
  Remove the headphones:
  sqlc.removeEventListener (SQLEvent.OPEN, open_db_read_write_RESULT_event_handler);
  sqlc.removeEventListener (SQLErrorEvent.ERROR, open_db_read_write_ERROR_event_handler);
  }
  []] >
  < / fx:Script >
  < fx:Declarations >
  <! - Place non-visual elements (e.g., services, items of value) here - >
  < / fx:Declarations >
  < / s:View >

  Flash Builder 4.5.1

  Win 7

  My path applicationStorageDirectory, where the database are created/retained:

  C:\Documents and Settings\MyName\AppData\Roaming\testSQL.debug\Local store

  Configure the run/debug panel uncheck the "clear the data application on each launch.

• Intercept touch green application event when the device is locked

  Hi, I'm new to blackberry. What I want is I want to take a key event (green or red button) when the device is locked and do specific tasks in my application that runs in the background if this button is pressed. Is this possible? How can I do?

  Just to be 100% accurate, it is possible for a keyListener (look to the top of the class) to pick up some events even when running in the background.  It can be different events when the device is locked.  Indeed, the events may be different depending on whether the "locked" screen is currently displayed or not. And the entire lot is dependent on operating system level, in other words, the same device running two different levels of OS will possess differently in terms of what keys can detect a listener in the background.

  So if you have a BONE and a specific device, so it might be something you can do, especially if it is an older operating system.  However if you try to create something that works generically, then know that I've tried and failed!.

• Photo editing software Photoshop elements 12 crashes directly when the application is started. Do not download / no error message.

  Photo editing software Photoshop elements 12 crashes directly when the application is started.

  Do not download / no error message.

  My system: Windows 8.1

  All the drivers are up to date.

  Please can someone help me?

  I solved this problem by cleaning the folder C:\Program Files (x 86) \Common Files\Adobe\SLCache.

  Thanks Rave.

• toggle is plotted on a graph when the application is running

  Hello

  I'm trying to figure out how to make a graph that allows the user to select which elements are drawn when the application runs.  I want all data to appear on the same graph with the same x and axis of ordinates and maybe some checked boxes or something to allow easily what items are displayed.

  Thank you

  Gary

  1... don't use two nodes in separate property for the PLOT VISIBLE and Act implementation CHART.  If you do that, you don't know who runs first, - they are independent.  Use a single property node (stretch it to include two properties).  The top property must be ACTPLOT, 2nd one, be VISIBLE TRACE.  In this way, it is guaranteed to run in the order you need.

  2 you are the cluster of box check ONCE at the beginning of the program of reading and using the same value each time.  You want to read the cluster when the CHANGE occurs, EVENT that is, in the case of the EVENT.  You can read the terminal, or read the NEW VALUE property for the event, so be it is OK.  But you have to read the new value, not the old one.

  3... you also read your buttons ONCE at the beginning of the program, and re - trace the same value whenever you draw. You need to know when you need to draw and THEN read them and lead the chart.

  4... If you set the timeout to, say, 100 mSec, in the TIMEOUT case, read the buttons and drive the graph, then you will have a living picture that updates approximately every 100 milliseconds.  Implement #1 and #2, and you can turn on and outside plots.

  I say "Roughly" because of the way the timeout works - if you wait 99 mSec and then click on a checkbox, the wins Manager check box and the timer 100mSec STARTS OVER when you get to the next iteration.

  If you want the table to day exactly every 100 msec and then use time separate loop, with a WAIT TIL NEXT MSEC MULTIPLE.  Do the waiting, read buttons, drive chart and repeat.  A separate loop will not be disturbed by events in the loop of the user interface.

• The speakers click when the fan starts and stops Equium A100-147

  I recently bought the 100-147 satellite and noticed that a click comes from the speakers (or headphones or external speakers) when the fan starts up and even when the fan stops. Sometimes it s quite remarkable, other times not so remarkable.

  Everyone can hear that click? If it's normal, I can live with that, otherwise I will return it for repair. Any comment please?

  In addition, it seems slow at startup and shut down. Put into service takes 2 minutes and 35 seconds, and stop to 33 seconds. Is this normal bearing in mind, it is running MCE? I have loaded additional software such as Itunes, Nero, Office 2000, Photoshop 5.0 etc.

  Thank you for reading.

  Clicking noise when the fan starts or stops turning is not uncommon. On my satellite a similar sound will appear when the fans begin to turn or the HARD disk starts to spin.
  Then worry about don t, I think its OK.

  The start-up procedure can take several times when a lot of applications and software to load at the beginning. Equium A100 seems to be one of the newer laptops, and I assume that different applications Toshiba load at the beginning.
  Also an Antivirus applications could extend the startup procedure.

  You might try testing something. Disable the antivirus of loading at the beginning and check if the laptop will start faster.

  It s even with stops. All background processes that are run in the context of the operating system should be closed until the laptop shuts down completely.

• When the computer starts first to the top, a window titled "run as" the question "which user account do you want to use to run this program?

  Original title: which user account you want to use to run this program?

  I use a computer that is running Windows XP SP3. Recently, when the computer starts first to the top, a window will appear titled ' run as ' the question "which user account do you want to use to run this program?" with two radio buttons. The default selection is "Current user" and there is a checkbox to "protect my computer and data from unauthorized program activity. The other button is for "the next user. I have to click 'OK' before you can run any programs.

  There is only one user on the computer. Why has this window began to appear and can I get rid of him?

  Hello

  That you recently installed which triggers this popup message initially upwards?

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• How to remove temporary files, waiting to be written to disk when the computer starts? __

  How to remove temporary files, waiting to be written to disk when the computer starts?

  Hi Reasman,

  Welcome to the Microsoft answers site!

  To clear pending files, select the files/folders in the 'Files to add to the CD/DVD' box and press DELETE. However, if you want to delete all files, click the CD/DVD drive and select 'Clear the staging area' from the context menu.

  You can manually delete the files that are stored in the following location:

  %USERPROFILE%\Local Settings\Application Data\Microsoft\CD Burning folder

  I hope this helps!

  Kind regards
  Gokul - Microsoft Support

• When the application is removed

  Hello

  How will I know when the application is removed

  make a wish of application registry in are on start .i want to cancel the phone from the server on the uninstall.

  In addition to a second request for guard dog, the only approach I am aware to do this was the CodeModuleListener added in OS 5.0.  Take a look at this and search the forum for other users who have tried it.  I'm not sure it works as well as we would like.

• Warn when the application moves to the State active or inactive?

  I can't find the right search words.  I want to be notified when the application becomes idle / reduced due to:

  user, reducing to the minimum the app

  When the unit is put or paused

  I also want to know when:

  App become active / goes to the foreground

  How can I check for these events?

  Hello! Check the Application signals: instance() in Application.hpp:

  void thumbnail();
  fullscreen() Sub;
  void invisible();
  void asleep();
  void awake();

• Notification when the Application in the foreground changes?

  Is it possible to get a notification when the application in the foreground changes?  For example, if the user launches the browser, can my application be notified?  I couldn't see anything through the global event listener callback.  I know it is possible to query for this application, but is not ideal.

  Jacul is right, you get notifications on your application becomes the application in the foreground (and vice versa) but there is no way to get this information on other applications.

• How to register for an event when the device is connected to the PC in USB mode or sync

  I develop application on blackberry with phonegap.

  I want to hear event when the BlackBerry device is connected to the PC by USB MODE or sync.
  I saw mediagallery and applications Filemanager showing the dialogue that the application cannot be used when connected to the PC in USB mode.
  I want to display dialog similar to my request.
  Can anyone please help on how to do it.

  I saw blackberry webworks API

  public static Boolean blackberry.system.isMassStorageActive)

  who says if massstorage is active or not.

  But I can't keep on request this API every time. I'm looking for an API that gives me the reminder.

  Can you please help.

  On the side of Java, this can be done by implementing a FileSystemListener and the rootChanged method:

  public void rootChanged(final int state, String rootName) {
      if (rootName.equalsIgnoreCase("sdcard/")) {
          if (state == FileSystemListener.ROOT_ADDED) {
              /* SD Card is available. */
          } else if (state == FileSystemListener.ROOT_REMOVED) {
              /* SD Card is not available. */
          }
      }
  }
  

  I was not able to find a corresponding WebWorks API or API community well, so I think you need to create your own custom extension to implement this feature of the listener.
  https://developer.BlackBerry.com/HTML5/documentation/using_javascript_extensions_1866976_11.html

• Global dialogue - show when the application is in the background

  I have a function that opens a dialog for the user and the user must choose one of two options. The thing is, this function can be called when the user press a certain button, or when the application is in the background. So, to do this, I use the following code:

  synchronized(Application.getEventLock()){
              final Dialog d = new Dialog(Dialog.D_YES_NO, msg,
                      Dialog.NO, Bitmap.getPredefinedBitmap(Bitmap.EXCLAMATION), Manager.VERTICAL_SCROLL);
              // So I would identify it as a Dialog
              if ( Application.isEventDispatchThread() ) {
                  // We have the Event Thread, can just show the Dialog
                  UiApplication.getUiApplication().pushModalScreen(d);
              } else {
                  // running in background
                  UiApplication.getUiApplication().invokeAndWait(new Runnable() {
                  public void run() {
                      NotificationsManager.triggerImmediateEvent(ID, 0, null, null);
                      UiApplication.getUiApplication().pushGlobalScreen(d, 1, UiEngine.GLOBAL_MODAL);
                      NotificationsManager.cancelImmediateEvent(ID, 0, null, null);
                      }
                  });
              }
              return ( d.getSelectedValue() == Dialog.YES );
          }
  

  It works very well when the user presses the button that calls this function. However, when the function is called when the application is in the background, nothing happens.

  If you tap on the icon of the app again, it doensn can't have launched, the debugger says the application application forground and if he says so it is already running and doesn't anything. If the application crashes and you can't access.

  How can I solve this problem and make the pop up dialog box to the user evern if the application is not to the point?

  Thank you for your time.

  I had problems with invokeAndWait() gel all that precedes. Unless you really need, I would use invokeLater().

• Node Manager does not restart the WebLogic servers when the computer starts

  Hi all
  
  I'm testing the new WebLogic Server version as well as of new forms and reports. I don't have much experience with WebLogic (using the Internet Oracle 10g Application) bare with me for a moment.
  
  I'm using Node Manager to start admin server and all the other managed servers. I also installed nodes as a Windows service manager and configured the boot parameters to include Xrs-/-Xnohup, as stated in the documentation and everything seems to work fine until I restart the server. Node Manager service starts and according to his diary, he plays startup.properties of each server, but it does not start them. Am I missing something here? I found myself in an impression that Node Manager must restart the server in case of reboot system, if the server was running when the computer has been restarted.
  Even though I don't have much experience with WebLogic, I'm not a beginner. I managed to migrate (for testing only) all the business application (more than 1000 forms and reports) of iAS 10g to the new version in two days. Application works very well and I only have problems with servers to start when the computer starts using Node Manager.
  
  Test environment:
  Windows 2008 Standard 32-bit
  RAM: 2 GB
  HARD DRIVE: THE 140 GB
  CPU: 2xXeon

  # nodemanager.properties
  ...
  CrashRecoveryEnabled = true
  ...