When the application is removed

Similar Questions

• Detect when an application is removed from the device.

  Y at - it a mechanism that can help by asking the application when it is suppressed by the user, it may be necessary to do some accounting operations when the application is removed by the user. ?

  -Thank you

  At least for the moment, there is no way.

  I wonder if there should be any of this necessary accounting though. If you store application-specific files in the shared folders, you are probably violating the design guidelines for the file system. Apps should always store their own data inside their files of sandbox.

  If you store files readable by other applications in the shared folders, that's fine, but then you should not try to remove these when uninstalling.

  I know I make generalizations without knowing your particular case... I wanted to just make sure that you do not have one of the most obvious things as 'bad'.

  In the future, it is possible a uninstall hook will be available as part of the call, although I doubt that's going to be one of the first things they add in the next updates (10.2 or more). It's most probably not one that has even been asked yet, so I encourage you to file a feature request in the developer Issue Tracker if you really need this (and don't forget to explain in detail the use case).

• Delete PersistentObject of the store when the application is uninstalled

  Hello

  I expect that on request, uninstall the PersistentObjects used by the application would be removed, but this does not happen.

  How can I achieve it

  Thanks yo

  If you create a custom class that is persistable your persistent data will be deleted when the application is uninstalled.  If you use a class set of BlackBerry APIs, such as String and store in the persistent store, it is not deleted when the application is uninstalled.  This is explained here:

  Manage the data recorded during the withdrawal of an application

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/handle-stored-data-when-removing-an-AP...

• The Authentucated smart card user session is stopped airtight when the card is removed, regardless of httpd SSLSessionCacheTimeout (default 300) setting. Why?

  I installed safety device in the option tab / advanced ff. Then using smart cards to connect to my server. The smart card user is authenticated and secure connection goes smoothly. When the card is removed from the card reader, the connection is immediately interrupted, regardless the SSLSessionCacheTimeout settings. Mine is set to 300.

  I did the same thing with IE, it maintains the connection until the expiry of the SSLSessionCacheTimeout.

  It is characteristic of FF-specific-designed? Or do I FF browser-specific sth keep my secure connection based on the parameter SSLSessionCacheTimeout?

  Thank you

  Hey SecureDevPaty,

  I wonder if you have installed a cert in the side server or client-side.

  • Installation of the Module pkcs11 access card smart biometric security or external blinds. Click on this link for more information.
  • https://developer.Mozilla.org/en-us/d.../JavaScript_crypto
  • The command line, you can use the certutil tool NSS _ https://developer.mozilla.org/en-US/d.../NSS_tools: _certutil to manage certificates.

  I'm not an expert in the present, but these are the references that I found. I * think * after reading this session http://stackoverflow.com/questions/12.../session-disconnect-the-client-after-smart-card-is-removed LAA there is a feature of ssl in the about: config page. If you are looking for ssl, look at the features of trading. who, after having reread the thread we already did.

  I started to read more about the rules of ssl

  • http://blog.johnath.com/index.php/200.../Security-tidbits/
  • http://Tools.ietf.org/html/Draft-Friedl-TLS-applayerprotoneg-02

  and a few rfcs. My question is, the rule for timeout, is this set on the server? with a specific rule in the cert? If it is a basis of cert, I would ask stackoverflow.com

• Satellite Pro L500 - stops when the power cord removed

  Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

  Someone please help. I have not installed anything new.

  Hey,.

  For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

  I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

  You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Skype rings only when the application is open

  I have a Skype number for my phone a few days ago and I just noticed a problem. When people try to call me using my Skype number, it sounds only when the application is open and the phone is unlocked. However, people can still call me normally on my Skype ID, it is locked or not currently open to the app. It's a rule I missed when having a Skype number?

  I reset my phone to factory settings and it works now.

• Skype number rings only when the application is open

  I have a Skype number for my phone a few days ago and I just noticed a problem. When people try to call me using my Skype number, it sounds only when the application is open and the phone is unlocked. However, people can still call me normally on my Skype ID, it is locked or not currently open to the app. It's a rule I missed when with a Skype number?

  (Previously posted this in the Android subforum)

  I reset my phone to factory settings and it works now.

• toggle is plotted on a graph when the application is running

  Hello

  I'm trying to figure out how to make a graph that allows the user to select which elements are drawn when the application runs.  I want all data to appear on the same graph with the same x and axis of ordinates and maybe some checked boxes or something to allow easily what items are displayed.

  Thank you

  Gary

  1... don't use two nodes in separate property for the PLOT VISIBLE and Act implementation CHART.  If you do that, you don't know who runs first, - they are independent.  Use a single property node (stretch it to include two properties).  The top property must be ACTPLOT, 2nd one, be VISIBLE TRACE.  In this way, it is guaranteed to run in the order you need.

  2 you are the cluster of box check ONCE at the beginning of the program of reading and using the same value each time.  You want to read the cluster when the CHANGE occurs, EVENT that is, in the case of the EVENT.  You can read the terminal, or read the NEW VALUE property for the event, so be it is OK.  But you have to read the new value, not the old one.

  3... you also read your buttons ONCE at the beginning of the program, and re - trace the same value whenever you draw. You need to know when you need to draw and THEN read them and lead the chart.

  4... If you set the timeout to, say, 100 mSec, in the TIMEOUT case, read the buttons and drive the graph, then you will have a living picture that updates approximately every 100 milliseconds.  Implement #1 and #2, and you can turn on and outside plots.

  I say "Roughly" because of the way the timeout works - if you wait 99 mSec and then click on a checkbox, the wins Manager check box and the timer 100mSec STARTS OVER when you get to the next iteration.

  If you want the table to day exactly every 100 msec and then use time separate loop, with a WAIT TIL NEXT MSEC MULTIPLE.  Do the waiting, read buttons, drive chart and repeat.  A separate loop will not be disturbed by events in the loop of the user interface.

• How do 'Enum Control' disabled during the execution of an executable application and make activated when the application is stopped/abandoned?

  Hello

  I use a "Enum control" on the façade of an executable application built with application builder for LabVIEW 2013 full professional development system. I want Enum control remains activated prior to execution of this request so that I can choose any value from the list of available numeric values, but when I run this application; Enum control should become disabled so that the user can not select another value in the list of data during application execution values so that the default setting remains unchanged during the execution of this application. Enum control must also be activated when the application is stopped/abandoned so that the user can select any value.

  Could someone pls suggest a solution to this problem?  If I select the active state' to 'Disabled' in appearance tab then all listed values becomes disabled.

  Concerning

  Jamal

  I suggest to use the node property of persons with reduced mobility.  You can then disable the enum at the beginning of the program and then activate it in the judgment.

• HP HDX 18 - Win 7 Home Premium (64-bit) CPU is palpable when the charger is removed from the laptop/notebook computer

  I currently have a problem where my CPU stands at 90% to 100% when the charger is removed from the laptop. He immediately rises despite no process running. When the charger is placed back in the CPU of the laptop is usually highest at 2%-5%.

  The operating system is Win 7 Home Premium (64-bit).

  Corrections or suggestions would be very appreciated.

  SOLVED

  Go to control panel > hardware and audio > power options > change settings > change advance power settings > managent processor power > political cooling system > set to battery for 'Active' option if it is selected as a liability.

  sas84_HeavyHitR wrote:

  I currently have a problem where my CPU stands at 90% to 100% when the charger is removed from the laptop. He immediately rises despite no process running. When the charger is placed back in the CPU of the laptop is usually highest at 2%-5%.

  The operating system is Win 7 Home Premium (64-bit).

  Corrections or suggestions would be very appreciated.

• Push notification when the application is closed

  Hello! I want to recive notify with my application when the application is closed.

  is this possible? An example of code for this?

  Kind regards!

  Sorry, with sample collector push, can result.

  Thank you!

• Warn when the application moves to the State active or inactive?

  I can't find the right search words.  I want to be notified when the application becomes idle / reduced due to:

  user, reducing to the minimum the app

  When the unit is put or paused

  I also want to know when:

  App become active / goes to the foreground

  How can I check for these events?

  Hello! Check the Application signals: instance() in Application.hpp:

  void thumbnail();
  fullscreen() Sub;
  void invisible();
  void asleep();
  void awake();

• Notification when the Application in the foreground changes?

  Is it possible to get a notification when the application in the foreground changes?  For example, if the user launches the browser, can my application be notified?  I couldn't see anything through the global event listener callback.  I know it is possible to query for this application, but is not ideal.

  Jacul is right, you get notifications on your application becomes the application in the foreground (and vice versa) but there is no way to get this information on other applications.

• Prevent the PlayBook goes into mode standby when the application is open

  What is the code needed to prevent the PlayBook mode 'sleep' when the application is active?

  Maybe this can help: https://github.com/blackberry/WebWorks-Community-APIs/tree/master/Tablet/sleep

• Global dialogue - show when the application is in the background

  I have a function that opens a dialog for the user and the user must choose one of two options. The thing is, this function can be called when the user press a certain button, or when the application is in the background. So, to do this, I use the following code:

  synchronized(Application.getEventLock()){
              final Dialog d = new Dialog(Dialog.D_YES_NO, msg,
                      Dialog.NO, Bitmap.getPredefinedBitmap(Bitmap.EXCLAMATION), Manager.VERTICAL_SCROLL);
              // So I would identify it as a Dialog
              if ( Application.isEventDispatchThread() ) {
                  // We have the Event Thread, can just show the Dialog
                  UiApplication.getUiApplication().pushModalScreen(d);
              } else {
                  // running in background
                  UiApplication.getUiApplication().invokeAndWait(new Runnable() {
                  public void run() {
                      NotificationsManager.triggerImmediateEvent(ID, 0, null, null);
                      UiApplication.getUiApplication().pushGlobalScreen(d, 1, UiEngine.GLOBAL_MODAL);
                      NotificationsManager.cancelImmediateEvent(ID, 0, null, null);
                      }
                  });
              }
              return ( d.getSelectedValue() == Dialog.YES );
          }
  

  It works very well when the user presses the button that calls this function. However, when the function is called when the application is in the background, nothing happens.

  If you tap on the icon of the app again, it doensn can't have launched, the debugger says the application application forground and if he says so it is already running and doesn't anything. If the application crashes and you can't access.

  How can I solve this problem and make the pop up dialog box to the user evern if the application is not to the point?

  Thank you for your time.

  I had problems with invokeAndWait() gel all that precedes. Unless you really need, I would use invokeLater().