Eventvwr newspapers windows core file infecftion Possible

Similar Questions

• Windows cannot install required files. File is possibly corrupted or missing. Error code 0 x 80070570

  I have Windows 7 Professional upgrade disk. I select custom installation. the trial ends approximately 54% then displays this message: Windows cannot install required files. File is possibly corrupted or missing. Error code 0 x 80070570 do - what I do?

  try to install by removing a strip of memory (RAM) If you have 2 stick of ram installed.

• How can I recover encrypted after reinstalling Windows jpg files?

  ENCRYPTED JPG FILES

  I recently had a major BONE down and since my laptop running XP Pro) was bought four years ago in a former

  employer, that he hasn't had the recovery discs, I had a techie load discs of my daughter in my laptop. This of course

  led to my loss of all files. I had the backup files to a hard drive stand alone. I had about 6 GB of photos, mostly from the jpg

  which approximately 1/3 have been encrypted. I don't understand why, because all the photos have been scanned or copied on the

  same laptop running XP Pro. I've never knowingly encrypted files. Is it possible I can get these encrypted

  files? I don't have the certificate number of the previous operating system. Still, I don't understand why some files would be

  encrypted while others were not using the same Windows XP Pro operating system. Can you help me? In the opposite case

  I'll have to rescan hundres of photographs. Thank you.

  Yes, the repair shop know what they were doing, but the fact that you gave them a Dell reinstallation CD, as well as the fact that you got the computer back without your files, suggests that what the store did was a "clean install".

  The facts that the files appear in green and the encryption checkbox checked are bad for you.  Both indicate that the files are encrypted in fact using the Windows Encrypting File System (EFS).

  I've never heard of files becomes encrypted without any action of the user, but how the files got encrypted are now irrelevant.

  As far as I KNOW, your only hope is to download the demo version of Elcomsoft application linked in my previous post and see if we can find any trace of the hard disk encryption key which is not crushed by the relocation.  I don't know, but I suspect that the free trial will tell you if it can or cannot decrypt your files... but they will decrypt only really if you pay for it.

  ElcomSoft claims success in situations like yours.  The less you use the computer before you run the data recovery software, the better your chances of recovery.  I think you have to go with the more expensive "professional" version.

• start the computer to start but stops at "failed to load the core file?

  Original title: how to get Windows XP to boot my computer from starting when starts but stops at "failed to load the core file?

  When I try to start my computer, it stops at "cannot load the kernel."  It will go no further. What is the solution?

  Please see: How to perform a Windows XP repair install

• Windows XP file sharing failures

  I work for a financial company and we use our non-stop server.  Our server is just a XP computer a sharing folder.  Since yesterday, the server does not leave ANY computer access.  All sharing and security settings are defined very well, as they always were.  Any ideas?

  Hello

  I doubt that anyone can have a clear idea without being particularly familiar with your system/network.

  It can be one or more of the many configurations/parameters that went 'haywire '.

  Redo the sharing.

  --------------------

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

  In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -----------------------

  P.S. assuming that it is a solid, a financial company, it might be time to hire a COMPUTER consultant and using astrong network safe ,secure real solid server like Windows SBS.

  -------------------------------
  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows Vista does not boot, black screen after "windows loading files...". »

  I have a laptop HP Pavilion dv2000, it came with windows vista, so I don't have a boot disk. When I try to start it, it will say "windows loading files...". "with a bar, once the bar is loaded it will say microsoft Corp. (with the copyright symbol) and another bar with a bar made up of three small bars of loading through it, once that is done, it will show a black screen. I have installed recent updates and I can't access the restore mode or security system.

  Hello

  The possible fix is the same that you can not boot the system currently.

  You need to make a computer repair/restore on another disc, borrow a friends Windows disk.
  or buy one from the manufacturer of the system. See the methods in BOLD above which also shows how
  a repair/recovery disk which is bootable.

  It may not be repairable by a user and the help of a real store of the computer (no leeks and peaks at)
  a BestBuy or other BigBox stores) or Support from HP is required.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated

  Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated. Tried all posisible boots and no joy, continues to turn it back on! Frustration...

  Hey James,.

  I does no change, I didn't download a document from my email (from a sender of confidence). I tried to start in safe mode, just, it restarts and goes back to the corrupted checksum display... Last known good config was the same result! The only error message is one that is in the title of this post, not others. Another detail, that I forgot to add is that it does not get insofar as a logo windows before it fails, just the toshiba start screen, then either passes the corrupt message checksum or a blue screen and restarts before I can read the text on the blue screen. Thanks for your response! Any additional help would be excellent if you can. In the meantime, I'll try your methods. Thanks again
  OK, I have now managed a Startup Repair trying over and over again. Restore all settings and now looks very good, thanks for your help!

• 0xc0000221 error: Windows Boot Manager is possibly corrupt. The header checksum does not match the checksum calculated.

  Just turned laptop on a message saying... Manager of windows startup, the file is possibly corrupted, his header checksum does not match the sum of computer control. ?? File: / windows/system32/win load.exe...

  status: 0xc0000221.

  What help please this meen?

  Original title: help!

  Hi markwiggins,

  Follow these steps:

  Method 1: Run the Startup Repair

   

  For instructions, see the following article:

   

  Startup Repair: frequently asked questions

  If the startup repair does not resolve the problem, follow all the methods of these items:

  What to do if Windows does not start correctly

  How can I fix a startup (startup)?

  Method 2:

  Restore the system in the advanced system to a restore point recovery options menu before the show.

  For more details, see the following article:

  What are the system recovery options in Windows Vista?

  Method 3:

  Use the Bootrec.exe tool in the recovery Windows (WINRE) environment to troubleshoot and repair the Boot Configuration data.

   

  For instructions, see the following article:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

• error indicates "file is possibly corrupted. The checksum does not match the checksum calculated.

  Hello world

  I use Vista Home Basic, SP2. Windows takes a lot of time in the judgment and often fails to do this completely. Windows after logout again a soft purr at the disk continues. Windows fails to start quickly. After several reboot it starts and sometimes even refuse except CD assisted.

  In order to repair boot directly from CD is not possible either. Jump the trunk and windows from the Windows CD start loading.

  Error, States "Checksum error. The file is possibly corrupted. The checksum does not match the checksum calculated'.

  Do I have to reinstall windows or any help please.

  Jean-Philippe

  Hello

  I suggest you to follow the methods and check.

  I suggest you perform a check disk in Windows Recovery Options.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Warning of Chkdsk.

  Important: If all data on the hard disk may be lost when running chkdsk, as the chkdsk attempts to repair that affected sector.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

• The update of Microsoft Windows KB3134214 file is suspended and will not be, nor finish the rest downloads to install.

  * Original title: Microsoft kb3134214

  The update of Microsoft Windows KB3134214 file is suspended and will not be, nor finish the rest downloads to install. I downloaded the updated individual security file. I'll wait to install pending a possible resolution here. If anyone has experienced this problem and has a resolution, I would be grateful to receive information and repair.

  Hi Nathalie,.

  Thanks for the reply and the link to the article. I appreciate it. While I was not having trouble to download updates, it was one of the update of the files froze during installation. I had gel resulting set before your answer.

  I'm not sure what I did to fix it, but the installed annoying file itself. Here are the steps I took to learn that annoying file has been installed:

  "I restarted my computer.

  "then stop it showed that he was trying to install the file again

  "I hit the reset button on my machine.

  "My machine is restarted, I received the message that my machine was not correctly stop and choose Safe mode or start normally.

  "I chose boot normally.

  "Somewhere during the start-up, something installed or flashed a message

  "My system automatically restarted by itself.

  "On my screen, my computer displays a message saying it was set up my system.

  'My computer restarted again

  "Back to my login screen, I had a repeat of the previous message from my computer's configuration.

  "After that over, I arrived at my office

  "I've manually run Windows Update

  "After Windows Update, I checked the files available, disabled the original file in question and click the button install.

  "These files correctly installed and gave a message requesting to restart."

  "I rebooted my system manually.

  "Back in my office, I manually tried to install the file in question.

  "It gave me a message that it was already installed.

  How he installed himself is a mystery. Other than on the first attempt to update my machine, it has NEVER included in my another attempt to update. Anyway, my machine is purring along as if nothing had happened.

  You can mark my question.

  Thanks for your help,

  Robert

• If I buy a copy of the oem version of Windows 7 is it possible to upgrade to Windows 10?

  * Original title: need help

  If I buy a copy of the oem version of Windows 7 is it possible to upgrade to Windows 10?

  Yes, you can upgrade from versions of Windows 7 OEM to Windows 10:

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  Please note that you must take advantage of the free upgrade offer before July 30, 2015.

  You can find software OEM System Builder of dozens of online merchants. The current price for OEM Windows 7 Professional Newegg, for example, is $ 140. When I checked a few minutes ago, Amazon offered packages OEM Windows 7 Professional from several vendors at prices ranging from $ 101 to $ 150. When I checked earlier, a package specifically designed for reconditioned PCs cost only $ 50 for a 64-bit copy.

  There is no technical limitation to prevent you from using OEM software on your computer, although this software only works for a clean install, not an upgrade. In the past, Microsoft has been remarkably inconsistent in his advice to clients on the question of whether this practice is allowed. (See "is allowed to use Windows OEM on your own PC? Don't ask Microsoft. »)

  Source: http://www.zdnet.com/article/seven-perfectly-legal-ways-to-get-windows-7-cheap-or-even-free/

• Windows 7 - file/folder access permissions

  In Windows 7, is it possible to remove the folder and file access permissions throughout the world?  I changed the permissions of folder individually, but it's a nuisance, because permissions seem to vary throughout the structure.

  I also batch files copying and writing data that are also affected by these folder permissions.

  Does anyone know how to fix this?

  Hello

  
  I do not understand the process will be painful, however you must first start with the largest content and assign a new owner and save the changes made to all the sup files inherit the same permissions and down to the last file.
  Some useful tools that can help to facilitate this task, CACLS.exe, since there is not a direct support of article which explains the features and methods for the Windows 7 operating system, I would say that you use your favorite search engine to check its controls and description.
  
  Note: Make sure that when you are looking not to click or download random content that can be labeled 'Cacls, property, access' as these file may damage your computer.
   
  refer,
   
  Subinacl is an autmated process and therefore the OP will not have to change the file permissions individually if he could run this tool. These are advanced steps, do not try until the necessary measures are taken to ensure that the data and the system upward.
   
  http://blogs.msdn.com/b/astebner/archive/2006/09/04/739820.aspx

   

  I hope this helps.

• How to clear the Windows.edb file in Windows 8

  DISPLAY TO THE CLIENT ACCOUNT *.

  The customer has a PC under Windows 8, and he wondered how to remove the Windows.edb file. He recorded 60 GB of information. Is it possible to have the option of Windows search and have this file shrunk down to the size? Is it possible to empty this folder? Anyone have any suggestions on how to deal with this problem?

  Please respond with more information.

  Thank you very much for the help!

  I just had this problem myself, with a clue consuming 107/278 GiB!

  Here's the trick:
  (1) search for "Indexing Options" (under "settings"). Open it.
  (2) search for 'services' (or run "services.msc") and find "Windows Search". Stop the service.
  (3) remove the Windows.edb file
  4) click on "Change" in the Panel "Indexing Options" already open, then click on "Erase and rebuild" for the index. You can also specify another drive to store the index on.
  Hope that helps.

• VMware Workstation 7. Machine.The virtual Windows XP file specified is not a virtual disk

  Hi all, thank you in advance for your help and sorry for my English.

  I was normally using Workstation on a Win7 system, emulating a Windows XP system. Now I try to turn on the machine and the following message appears:

  "The specified file is not a virtual disk.

  I reviewed the logs, the file .vmx and I can't find the error. I think that VMware can recognize the virtual drive as a SCSI unit.

  The files in the directory of virtual disk:

  VMware.log

  VMware - 0.log

  VMware - 1.log

  VMware - 2.log

  Windows XP Professional.nvram

  Windows XP Professional.vmdk (10 GB file)

  Windows XP Professional.vmsd

  Windows XP Professional.vmx

  Windows XP Professional.vmxf

  Tie newspapers, the .vmx file and a screenshot of the machine.

  Thanks again for your help

  As I have not examined the content of the hard I cannot give you a definitive answer but I'll tell you that, with the obvious corruption, shown in the first two sectors of the disk recovery at this stage, it is necessary advanced if it is not very advanced and can also be extremely laborious to get you in very advanced techniques.  The problem is that I don't have time to explain, and or to teach someone how to do what else can be right now because it was not learned and understood all night and just can not be easily passed along.

  Suffice to say if you did not good backups along the way, while it may have been a hard lesson learned I bet that in the future do you good backups from that point forward to easily recover when something bad happens new!

• Failure to write a Windows Media file

  Help, I use a Gateway computer and operating system Windows XP Professional version 2002 Service Pack 3. It has Intel Core CPU 6600 @ 2.40 GHz, 2.41 GHz, 2.00 GB of RAM. I have the two Premiere Pro CS3 and CS4 installed. There are 54.1 GB of free space on my hard drive with 94.9 GB used.

  I used to create files without problem with the CS3 version .wmv but with CS4 there is a failure every time. Project exports to Media Encoder and encoder runs through the whole process and even, looks like it ends up. But once it gets to the end, here is the message I get.

  Windows delayed write failed

  Windows could not save all the data (my file) on the data was lost. This error can be caused by a failure of your computer hardware or network connection. Please try to save the file elsewhere.

  He also had this message in a separate window:

  Adobe Media Encoder debug event

  Adobe Media Encoder has encountered an error.

  [..-.. \src\Batch.cpp-186]

  I tried to change any variables that I could in the Media Encoder for creating a Windows Media file. For example, you can choose several presets: "Source NTSC to download high quality" "Source NTSC 1024 Kbps of download" and many others. I tried not to change anything on the filters, public, video, Audio or other tabs. I've never had to with the CS3 version. In addition, I don't know much about the Audio or video Codec.

  Any help is appreciated.

  As the request wrong, you have any external HARD drive of in the mix, especially USB 2.0 external?

  This lack of write delayed is common, when a program high-performance push more data, that the USB 2.0 connection can handle.

  It is also a sign of imminent disk failure HARD internal, or a controller failure.

  It's something to be very, very concerned.

  Please give a lot more information, especially in regard to your auxiliary system of e/s, i.e. of your HDD, their size, speed and type of controller, and how you have them allocated.

  Good luck and start making major, just in case backups.

  Hunt