Everyone has a success story with 6 to HGST sister NAS drive and Microserver HP Gen 8?

Similar Questions

• Lost my favorites in the sidebar has only 3 icons with (untitled), impossible to restore the bookmarks and cannot add bookmark. Tried to uninstall and reinstall Firefox: no change.

  Firefox crashed, and a message appeared on the Internet (I couldn't understand it, and I'm not able to remember). The problem seems serious, first of all, I scanned my registry with Registry Mechanic, and then I checked the status of my drive with Performance Toolkit, which has identified a low level and offered to clean the computer. I agree with you. And when I tried to reopen Firefox I discovered that the 3 icons in the sidebar with (untitled), that the bookmarks were gone and I could not restore, nor add anything.

  This may be a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

• Blue screen on a Vista Ultimate computer with My Book World Edition NAS drive when SSDP Discovery service is enabled.

  I recently added a Western Digital My Book World Edition (White Light) 1 TB NAS drive to my home network for backup purposes. The drive works very well with my two wired computers Windows XP and my computer Windows Vista Home Edition wireless. My problem is with Windows Vista Ultimate (32 bit) wireless station (a Lenovo IBM ThinkPad X 61 Tablet PC).

  On the Vista Ultimate computer, if I have sudden, Normal startup, then the computer will work fine except for when I go to shut down the computer. When I stop, the computer crashes for twenty minutes, suffered a blue screen (BSOD, saying he was arrested wrongly) event and then restarts automatically. This only happens if the drive My Book World Edition is online on the network. Turn the player off line and there is no problem on the computer.

  I reduced the problem down to the SSDP Discovery service. If I disable the SSDP Discovery service, then the problem goes away. (I do not consider that a viable permanent solution.)

  The big difference between Vista computers is only on the computer to Vista Home (one that has no problem), MIMBOE drive does not appear in Device Manager at all. On the computer Vista Ultimate (the one with the problem), the reader MIMBOE appears once under the record heading and once under system devices.

  Any help will be appreciated. Thank you.

  Sorry to everyone i this is my first attempt to answer.  I had the same problem with the hard drive WD book networked world stop.  WD has released a new firmware that fixed my problem on September 10, 2009.  I suggest that you try to update the firmware and maybe you'll be as lucky as I was.

• I had installed windows 8.1 with bootcamp, it was a c drive and I tried to do a second drive d with management of the disks, but when I shrink c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my

  I use macbook pro.

  I had installed Windows 8.1 with bootcamp, that there was a c drive, then I tried to do the second drive with disk management d when I shrink the c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my mac osx.

  Please help solve this problem.

  This partitioning is not supported. Please download GPT Fdisk from http://sourceforge.net/projects/gptfdisk/ and install it on the Windows side. Once it is installed, thanks for posting the output as indicated in the CMD window.

  

• Success Story with get switchable graphics to run on Windows 10 with one to Inspiron 15r / Inspiron 7520

  For background, some Dell laptops have a function where they use a low-power intel graphics card when running undemanding applications, but they spend a graphics card with high power, high power (series AMD Radeon) when demanding games is running. With the AMD/Intel version, it's a very fragile Setup and you can not download an older version of the drivers and expect to work. Dell engineers specifically design a version of intell driver installers that is compatible with this configuration.

  Pilot automatic/windows updates and changes to the OS can overwrite on this delicate configuration and you are at the mercy of the people of Dell support on when you will get an updated driver. If you use just the vanilla Intel video drivers, they don't respect the will AMD to take the chart control and the AMD video card will sit unused in your laptop.

  There are three parts to get Windows to use your preferred hardware driver, remove all installed software that provides drivers. This is done by uninstalling all the software that puts drivers on the hard drive. The second step is to remove all windows drivers is pegged against because Windows will not allow pilots used to be completely uninstalled. To do this put Windows in "safe mode" where it does not use most of the drivers and then uninstall and delete the driver files themselves. step final is to install your favorite drivers, the AMD and Intel video drivers in this case.

  Here's how I got AMD/Intel switchable graphics to work in Windows 10:

  1. I went on the site of dell drivers with Internet Explorer (not Microsoft Edge/Google Chrome/etc) and used the detection system to recognize my laptop. Then, I downloaded the video drivers Intel and AMD for 64-bit Windows 10
  2. I uninstalled all of the AMD and Intel video drivers via the Add/Remove Programs application in Control Panel.
     1. You can search for "Remove programs" in the search box in the windows bar to get the applet in Windows 10.
     2. There are a lot of Intel drivers for things like network cards, be sure to uninstall the drivers for video cards only.
  3. I started in SafeMode Windows 10. Search for instructions on internet to find out how to enter safe mode.
  4. I opened the control panel and went to the Device Manager to remove the video drivers left on the system.
     1. I think that currently used driver files are not completely uninstalled when you uninstall the software of the driver in the usual way, we must do more.
     2. Open Device Manager (a passerby is windows key + 'x')
     3. Open graphics cards, there should be one for intel and amd.
     4. Right-click on each graphics card and choose uninstall. Then click on the option button driver remove and remove drivers
     5. reset
  5. After the reboot, check that the graphics cards in Device Manager are very generic, they say probably intel or amd.
  6. Install the device driver software intel you downloaded from dell
  7. reset
  8. Install the amd you device driver software downloaded from dell
  9. reset
  10. You should now see the option "Configure switchable graphics" If you right click on the desktop.
  11. Try to run a game that requires a bit of graphics card
  12. Open the app "Configure switchable graphics" and check that it has considered the game that you just ran and that he put it to 'high performance '.
  13. fact

  Probably, you should be on a/c during all this power. I think that I heard that the switchable graphics may change if it is on battery power, not sure.

  Skyrim has worked after that, as well as the intros of l4d2 ran very slowly (they are incredibly unstable when they are executed on the graphics of intel), but the application itself crashed without warning on the desk, just as he finished a solo campaign of loading for me. I suspect that it's probably more a thing of windows 10 a graphical thing and hopefully reinstall the game will fix it.

  Well, my case is very simple. I just install the driver the newest Intel.com and amd.com, and everything works. I wish just that Dell can update driver Audio Conexant Audio Device.

  

• Everyone has been successful install (machine wide) ODAC 12.1.0.2.1 x 64 in silent mode?

  Hi guys,.

  When installing via the GUI, I have the possibility to install it across the machine (to enter in the GAC at the Oracle.dataaccess.dll file)
  However, during installation using the silent, I can't find the option/settings to be set in the response file to install the machine-wide.

  Thanks in advance for you help.

  Luke

  Oracle plans to solve this problem in ODAC 12 c version 4. For now, you can specify pairs of variable value of command-line instead of the response file, so you can continue with silent install in ODAC 12 c R3.

  For example, as indicated below, after "setup - silent", rather than specify the response file, provide the variables and their values.

  ************************************************

  D:\odac12.1.0.2.0\Disk1 >setup-silent oracle.install.responseFileVersion=/oracle/install/rspfmt_clientinstall_response_schema_v12.1.0 ORACLE_HOSTNAME = INVENTORY_LOCATION = "C:\Program Files (x 86) \Oracle\Inventory" SELECTED_LANGUAGES = en = D:\app\client\\product\12.1.0\client_1 = D:\app\client\ oracle.install.IsBuiltInAccount ORACLE_BASE ORACLE_HOME = true oracle.install.client.installType = oracle.install.client.customComponents Custom = oracle.ntoledb.odp_net_2:12.1.0.2.0, oracle.p2k.odt:12.1.0.2.0 oracle_install_client_odac_odt_set_vs2012 = true oracle_install_client_odac_odt_set_vs2013 = true oracle_install_client_odac_odt_set_vs2010 = false oracle_install_client_odac_config_odp =. Fake PROXY_PORT = 0

  ************************************************

• Has detected an error with your hardware or software graphics Illustrator and tipped to the CPU for this session overview

  It is a MacBook Pro (13-inch) mid-2014. 

  It's also getting the following error: "cannot complete preview. There is not enough memory. "ID:-108".

  
  

  Any thoughts on how I can solve these problems?  Illustrator works very well on the mac for months.

  You must move to Illustrator CC 2015.3

• Could not advise. "Illustrator has detected an error with your material or graphics processing software and went to the preview of the CPU."

  Ashtosh Chaturved advised, "If you get a fallback error please let us know of your file by email to [email protected] .» Please reference this thread in your communication. Get us this investigation and see how these situations can be handled better. »

  Of course the email link does not work. Thus, counsel was completely useless.

  10.10.4 OS - X

  NVIDIA GeForce GTX 680MX

  Drivers latest Apple - NVIDIA don't post for Mac

  Any external monitor

  iMac 27 "(end of 2012)

  32 GB memory

  You must address this problem. Without a GPU running Illustrator is a pain in...

  Doug Thomson

  Please apply the latest patch 19.1 this should solve your problem.

  -Ashutosh

• What is "Peripheral chart DirectX 9 with WDDM 1.0 or higher driver" and how do I get one? :)

  I don't know what this is... i have an old graphics... from 2001 if it is than its reference.

  I met all the other requirements to run Windows 7, but this one... What do I need and where can I get... what to look for when shopping for it?

  Send an email to * address email is removed from the privacy *.

  Thank you

  I looked at a ton of different maps and I'm really confused... I guess what I'm asking, it's what would be a good graphics card for viewing movies, games, blu - ray, etc. with a decent price.

  For a card that can handle blu-ray, under $100, check out this Slashdot article: http://tech.slashdot.org/story/09/11/17/2035200/NVIDIA-Ships-Decent-DX10-Graphics-Card-For-Under-100?from=rss&utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+Slashdot%2Fslashdot+%28Slashdot%29

  And a link to the map here: http://hothardware.com/Articles/Zotac-GeForce-GT-240-AMP-Edition-Review/
  
  Of JoelbX son favorite | Space | ----- | Send me an email . Programs 'Gadget'

• Problem with VMWare Workstation combo, .vhd virtual drives and physical disks in the sector of size 4K?

  All,

  I suspect something wrong with some of my virtual machines.  I have been using these virtual machines for a while, and I see some weird behaviour recently.

  I see a lot of corruption in the virtual hard disk (.vhd based).  CHKDSK automatically gets performed many large files such as Oracle datafiles get damaged etc...  It all seems quite random and inconsistent, but I am using .vhd virtual machines in VMWare Workstation for years without problem.  This problem is new, and hard drives are basically unstable.

  I * think * (and I'm totally off base) that is perhaps the issue with my new external hard drives.  These discs have a 4 KB sector size, without e512.  Thanks to this architecture of hard drive, don't mount not the tools of Microsoft or manupulate .vhd files on these disks.  The questions seem to go away if I switch to vmdk or switch to the physical hard disk size-one-sector 512kb.  Because errors are not compliant, that I don't really have a way to document/prove that is the case, but it seems to be.

  I use version 9.0.0 on Windows 7 Workstation, and the guest is Windows Server 2008R2.

  My question is:

  (1) what meaning?

  (2) how I prove/document, since it is a contradiction?

  (3) is this a known problem?

  (Btw, switching HDD's vmdk is not an option in our case due to an obscure legal agreement with Microsoft.  I have to distribute my VMs in vhd format, even if they are designed to run on VMWare...)

  -> Adam

  These discs have a 4 KB sector size, without e512.

  (I've highlighted "without e512" in "BOLD" to key in my answer to the host operating system.)

  -L'OS is Windows 7 Enterprise

  According to the political support for the 4 K sector hard drives in Windows, Windows 7 does not support the native 4 K (logical 4 k sector size) but it does not support Advanced Format or 512th (size of logical sector physical and 512 bytes of 4 K) and that is can be the question.

• Everyone has a problem with the Windows Explorer permanently closing?

  * Original title: Windows Explorer

  Everyone knows about a problem with the Windows Explorer (not Internet Explorer) without interruption closing? It is not fair on 1 computer, I have 2 desktops and 2 laptops, and it does on 4 of them. They are all running Windows 7, (1 to the publishing house, 1A Ultimate and 2 Professional).  I can right click on something, even on the desktop, and most of the time, I get a message that Windows Explorer has stopped and the ability to close or wait for it to respond. I have normally not 30 minutes or more to wait so that he could respond and if I close it, then it does nothing. I've done all updates are recommended for all my computers, I did the defragmentation, disk check, etc and it still continues. I need help, please. I am so sick and tired of what I am about to go to a Mac and I don't like Mac computers, but said there is much less of a problem.

  You have loaded all 3rd party "Add-ons" in common to all PC? For example (this is an old post Vista but gives the general idea) - http://answers.microsoft.com/en-us/windows/forum/windows_vista-desktop/windows-explorer-crashes-on-right-click/719385e6-fff5-498d-807c-103bf0344f44?page=1&tm=1423414000974 and see Ramesh respond.

  If not, is there clues in the log of events (errors) in common on all computers where the crash?

• I use iMessage to the text of my Macbook. For some reason, it will not let me send a text message to a particular group (everyone has iMessage/iPhones) to my computer, but works well on my iPhone. All messages always appear on my Macbook iMessa

  I use iMessage to the text of my Macbook. For some reason, it will not let me send a text message to a particular group (everyone has iMessage/iPhones) to my computer, but works well on my iPhone. All messages always appear on my Macbook iMessage, but when I click in the conversation, no text box for me to write as he does with everyone. It's driving me crazy. How should I do? The two contacts are in my address book and identified on my computer but I can't their message from my computer and have to keep spending on my phone to text their return. Their new messages are always also highlighted on my computer. In the photo I've included, you can see there is no text box for the text of the group with "Franny, dad."

  

  Thanks for any help!

  What happens if you start a new conversation with Franny & Dad from the IOW computer do not try to "catch" the conversation

  Click on new message and put their names in there

  If this does not work - remove the wire from the Mac and try again

• iCal (iMac - 10.6.8) has now stopped syncing with the iPhone 6 (9.3)

  According to the title of the topic, my phone and computer will not sync iCal... This is a new since the update to 9.0... have been waiting for Apple debug but we are now on 9.3 and still nothing...

  not happy with Apple, given that Steve Jobs has left... seems to be one bug after another, and while I appreciate really how complex these little beauties are, the lack of testing before release seems to have become endemic...

  Everyone you have a suggestion or is it a waiting game for Apple to sort?

  Update your computer OS.  iOS 9 requires iTunes 12.3 or higher, which is not compatible with OS 10.6.8.

  Has nothing to do with the bugs, and it's not for lack of Apple.  It has to do with the fact that you are using an operating system on your computer which is obsolete and is no longer supported.

• What's the story with updates?

  Hi all

  Is could someone please tell me what is the story with theToshiba updates to the laptop? Why should we expect to receive our updates on the Toshiba site?

  The best thing to do in 2010, for someone which onws a pc is to get updates. But the history of Toshiba is different.

  We get software quite unreliable called Tempro, where people when followed his advice get their computer fried, and advice from this forum are to ignore it. When I get to the Support from Toshiba site, no new update is available for my pc in my country of choice, but when you hit all countries the list suggests 47 updates worldwide, of which 43 are installed in our PC.

  In addition, for example Nvidia has just introduced the new drivers for the GT230M since 12/01/09 and still isn't available in the Toshiba site.

  I would be grateful to anyone who helps and suggestion on this issue.

  Thank you very much in advance.

  Hello

  The Tempro tells you the new updates published on the page of the European driver Toshiba
  It is clear

  But why update anything if the laptop works properly?
  Of course there are people who want to always have the latest version of driver, new version of the tool, etc., even the laptop to run correctly.

  My advice is simple; never change a running system.
  I recommend you update the operating system if certain problems are here

  Welcome them

• I get only a skeleton display when I go online, why? everyone has an easy to follow the answer

  I get only a skeleton display when I go online, why? everyone has an easy to follow the answer

  Hello

  1. is this issue happening with a particular Web site? If Yes, then which is the Web site?
  2. what browser do you use to go online? If you use Internet explore, then what version of Internet Explore do you use?
  3. you receive an error message when you try to go online?
  4. have you made changes on the computer before this problem?
  If you use Internet explore, you can read the following article.
  The video problems when you use Internet Explorer
  http://support.Microsoft.com/kb/2532294

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

   
   
  You can also provide us with the screenshot of the screen, when you sign in. See the following link on how to do i: after a screen shot on this forum?
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/take-a-screen-shot
  Here are the steps to upload a screenshot:
  (a) on the private domain of my post, click download file.
  (b) click on select.
  (c) navigate to where the download file is saved on your computer and click on submit.