After that the iOS put 9.3.1 update my Ipad wifi conectivity range has become very short
As the title says.
I've also updated to 9.3.2 and still have the same problem. I have a model wifi / 3G ipad, 3rd generation, I think.
We have 2 other iPads (both don't upgrade 9.3.2 no worries, but they are only wifi models) connected to our network of origin 2 PC and more a PS4, who have no problem and no settings have been changed.
I have the same problem with my wifi connection post update work and wifi to work is in another country altogether. None of these settings have changed either and all my other devices connect. I use a lot the flight mode.
If I'm sitting within 5 m of the router, wifi iPad will connect. Anything over that and it won't.
I tried to reset network settings. I also did a factory reset after saving everything. Tested the connectivity fees before you load my backup and had the same short connectivity problem.
Can anyone think of a solution without having to hold my iPad from Apple store, as it is not an official at the Apple store in many countries of me at the present time, although there is an Apple "chop shop" in the local mall for repairs of screen which I'm really not want to use.
Thanks in advance
Double check, it's a 4th Gen iPad (model A1460) and I would have added an edit to my original note if I knew how.
Tags: iPad
Similar Questions
-
Everyone noticed after the OS updated 10.0.1 update game Center disappeared from the desktop to your iPhone?
The Game Center app is pre installed and can not be deleted if use Spotlight to find it. Help here > use the search on your iPhone, iPad or iPod touch - Apple Support
-
Cannot open the safari link after installing the iOS 9.3
Cannot open the safari link after installing the iOS 9.3
This is a common problem and there is currently no permanent solution yet.
Try turning off JavaScript under settings - Safari - Advanced.
I think that apple will figure things out soon.
-
Hello!!!
IM Apple Fan.
Purchased IM Ipad2, Ipad4, Iphone6
Last month I already buy s Iphone6 +.
Today I feel unhappy
MY IPHONE 6 'history '.
My touch screen has a problem after downloading the IOS 9.0.2.
Already called and try apple advises the steps. But the problem still occur.
Already done restart of strength. Factory setting Reset also possible. But still the same problem.
Only can be used for a minute. After that... The problem comes in again & again & again...
APPLE.COM
Can U help me
Only products of Apple of love before updating the version 9.0.2
iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.
-
After that the upgrade of my URL bar no longer displays the Protocol.
After that the upgrade to Firefox 7.0 my URL bar is no longer shows me what protocol is used when you use http port 80. How can I turn this feature on?
The Protocol (http://) was removed from the URL in the location bar for pages http:// only. https:// pages will always have the Protocol. This can be confusing for some users. There is also a bug known, where if you copy the URL after selection of the awesome bar dropdown (but before loading the page) it does not include the http:// part.
Users can revert to the old behavior by setting browser.urlbar.trimURLs to false in about: config
- type of topic: config in the URL/address bar and press the Enter key
- If you see a cautionary, accept it (promise to be careful)
- Filter = browser.urlbar.trimURLs
- Double-click the pref in the lower panel of toggle it on 'false' OR , do a right-click on the pref in the lower panel, then choose "Toggle" switch it on "false."
- close the topic: config tab
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update if necessary:
- Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
- Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
- Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
- Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
- Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox
-
After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10
Have you tried these steps? If iTunes does not your iPad, iPhone or iPod - Apple Support
-
server control of automatic release after that the server took control
Hello
I have a vi that is not automatically "lock control" after that the server has regained control.
Currently, in labview 8.2, when the server takes over the control of a vi, one must first unlock control of vi (by right-clicking and selecting "unlock") before a customer can request control again. Does anyone know how to prevent the automatic locking of the vi from the end of the server when it regains control.
See you soon,.
BrissyDrew
Thanks NathanK,
I found a solution. When I used the vi at the server end I was selecting the wrong option when I right click. I was by selecting "take back control" when I should have been by selecting "controller of report. This last option helped a client to regain control when he asked for it without the server having to give it up first.
Thanks for your advice.
See you soon
BrissyDrew
-
Original title: user profile
My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button. I ran a virus scan and spyware scan in my user admin profile and he has not found anything. I don't know what to check.
Hello rhunter15,
There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.
First of all, we run System File Checker to see if you have a corrupt file system.
- Click Start
- Click on all programs
- Click Accessories, and then right-click on the command prompt.
- Select the Security tab and choose "Run as Administrator"
- Click on command prompt
- Type SFC/scannow.
It will scan and repair any damaged operating system files.
To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem. For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.
KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
http://support.Microsoft.com/kb/929135Once you have finished the clean boot, check again and see if you get the error of parental control.
If please post again and let us know if that helped pinpoint the problem or if you still need help.
Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
IR remote stops working after that the system will switch to standby
IR remote no longer works after that the computer goes to sleep. I use Windows Media Center (Vista) to the TV and use the remote a lot. The ONLY way to make it work is to restart the machine, which is a PITA.
In the device, here is what is displayed Manager...
Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)
I tried uninstalling, reinstalling the driver, unpluging the receiver IR USB, displacement of ports, etc., the software MS difficulty he tried, but nothing works. It allows to work all the time, but these last few months, you must restart the computer to operate the remote control.
Any ideas? Help, please.
BTW, it is a HP Desktop Media machine, and the remote control is the standard HP remote given out with their machines.
Here is the official Microsoft fix for error code 38:
Code 38: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory
http://TechNet.Microsoft.com/en-us/library/cc772090%28WS.10%29.aspxHave you tried to deactivate "standby" and checked for the repetition of the problem with the IR remote?
You can ask your question to the Media Center experts at the green button forum:
Have a Word with the help of HP to see if they have a fix for the same.
-
Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages
the printer is not the shades of grey even print cartridge is not yet empty
y at - it software for hauler color printing?
Thanks for your comments
Hello Nilsvolkel,
Thanks for the reply.
I'm sorry for the late reply.
I appreciate your patience and time.
Do not require any special software.
However, you can use the steps in the following articles and check.
Reference:
http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=fi-fi&kbid=328037&data=FCFfEfoyEiGLYDIUqzWyE0QE3127X87y&CL=1http://Windows.Microsoft.com/en-us/Windows/choosing-print-options#1TC=Windows-7
Please keep us informed.
Thank you
-
After that the most recent windows update, my computer starts a little more slowly and the start bar at the bottom rises gray and rasterized. In addition, all pages that I opened on the internet are coming with the same blocks of old, gray. Any ideas on what was past, and how to fix it?
Original title: old start bar
Right-click on your desktop, go to customize and then make sure that any theme in the 'Aero' section is currently selected.
-
Silverlight has been installed on my dell with media player and after that the tuner has stoped running silverlight would have something to do with it? I get a low rate and no signal tuner.
Hello
Thanks for the quick response.
What web browser do you use to access the links in my previous post?
If you use Internet Explorer, I suggest to optimize Internet Explorer settings and check if it works.
How to optimize Internet Explorer
http://support.Microsoft.com/kb/936213/ro
Warning: Please note that the reset Internet Explorer (IE) resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.
If the problem persists, you can reinstall the drivers for the Tuner card and check with the question.
It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.
-
Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?
Use the Acrobat Pro preflight!
To incorporate the missing fonts in Acrobat Preflight profile will incorporate the missing fonts in your PDF file assuming that:
(1) the fonts in question are installed on your system and
(2) the police themselves is not protected against the incorporation (they can at least see and print incorporation.
-Dov
-
After that the effects cannot continue: error when access to the files instead of inside "/ users/me/Library/Preferences/Adobe/After Effects / 13.8", if it please check the file permissions and try again.
[Fixed spelling - Mod]
Go to the folder listed in the path and change the permissions to read/write. Do you know how? It is in the info file.
-
My pc was broken and I had to by one. I did backup cd:s. I downloaded backups on CDs in the new pc, but I can, t open Premiere pro cs 5.5 application. How can I download Premiere pro cs 5.5 in my new pc after that the old pc was broken?
You can download at the bottom of the link:
Maybe you are looking for
-
No. 4 support for iPhone SE (only Airtel)
I recently bought a new sim card 4g supported Airtel and I use iPhone TO model ID - 1662. I'm not able to use LTE on my phone but only with airtel however network
-
My iMac keeps freezing since the upgrade to El Capitan!
Hello Can anyone help. I upgraded a few months ago in El Capitan and since then sometimes had problems with my desktop freezing, an irritation but not too much trouble. However, in the last two weeks, he becomes a nightmare! Most of the time its does
-
Satellite A200-1d(a): how to disable Flash cards without losing the FN keys
Hi all I recently bought a Satellite A200-1d(a) who was Toshiba value added package installed. I find that the top of the screen drop-down buttons very annoying is possible to disable the drop-down menu buttons without losing their uses accessed from
-
Qosmio F20-155: colors wrong when I try to use the S-video connection
When I try to use the S-video, the photo shows with wrong colors or color of Pentecost. Do I need some kind of driver? Sometimes the photo looks like it (press the link to see)http://www.jawally.com/VB/uploaded/6_ss.gif Please give little assistance.
-
scales of y XY graph with bed double (or more)
Deaar all, done graphic 128 x 64 GLCD is attached in order to see the - describe what I would like to see in LabView with your help ofcouse. It shows air humidity air and pressure for 96 hours back and I would have something comparable in LV if posib