everything works out of the training. How to use the drive as primary drive c to reset?

Similar Questions

• Tecra R940 - 1 hr: what happens to work out of the box with Linux?

  I'm considering buying a laptop Tecra R940 - 1 hr.
  I'm going to use it with linux (ubuntu) system.

  What happens to work out of the box?
  Should I expect any problems with the display/network/wifi/sound?
  What about camera, usb 3.0 and bt?

  What is possible to work? Suspend? Function keys? Fingerprint reader? SD reader?

  What's not to work?

  I run Ubuntu Studio (12.04) on a Tecra A11-ST3504, and everything works perfectly.

  However, your computer probably has the latest UEFI instead of the BIOS, and this causes problems for some with start-up and installation.

  If the live system starts and runs, I'd go for it.

  I'll put the admins the trouble to make their usual warning: "of course, Linux is not supported by Toshiba."

  Enjoy!

• T530 fingerprint - Win7 Pro Reader - does not work out of the hibernation

  Out of the hibernation of the fingerprint reader does not recognise my fingerprint at the level of the BIOS to unlock the system password and hard drive or at the level of Windows to connect on my Win 7 Pro account. Works very well on a cold start or restart. Suggestions?

  

  

  Make sure that the check box is unchecked and see if it works ok after put into hibernation. Just a guess, but it's worth it. I hope this helps.

• How can I delete a partition on my drive for example the "D" drive so I only have a C drive and also the amount of space between the partion everything goes back to the drive C th?

  SP3. I tried command prompt and the interface of windows, but this only removed the drive no transfer space drive as well. I formatted the partition first thus.

  Cannot be done with the native tools of Windows XP.  You need a 3rd party disk partitioning tool.

  Here are some that should work (I've not used personally each of them).  Read the manual.

  Easeus Partition Master Home (free)
  O & O Partition Manager
  Acronis Disk Director Home
  Partition Wizard Home (free)
  Partition Manager Personal

• Satellite Pro M30 graphics works not when the driver is installed

  Hi all

  I m having problems with my nvidia Geforce FX Go5200, in a portable Satellite Pro M30, (processor Intel Pentium M 1.7 GHz, 512 MB Ram). This card was working fine suddenly the laptop stops.

  I formatted the laptop and installed Win XP PRO. After installing the driver VGA, I restarted the laptop, but black screen started to come right after the Win XP splash screen appears. The laptop continues to start up but no screen.

  It starts fine in safe mode. I get my best screen simply by disabling the geforce card or uninstall the driver. I tried to install a new driver for the VGA on the download from Toshiba site, but same problem appears. I also tried the BIOS update but nothing happens.

  Can someone help me?
  [email protected]

  It's very strange question. It will be really interesting to know if this happens when you use the CD delivered recovery facilities.

  In any case, I assume that there is a problem with the LCD display. In safe mode, the desktop appears in the resolution decreases but the resolution to the OS boot will be suitable for a standard (1280 x 800), and of course, there is the problem.

  I am not a technician, but I recommend you contact the Service partner. AFAIK they use special tools and programs for display tests. They can tell you more.

• Application still works after changing the drive letter?

  XP is installed on drive C and all applications are installed on drive D, if I change the letter of the drive from D to E, would still be able to recognize this change on all the programs installed in XP? or will it be impossible to locate the drive for application?

  Thanks in advance for your suggestions

  Hi oem7110,

  Unfortunately, the installed programs do not work if the drive letter is changed to the disk were the programs are installed.

• Satellite A300-1J1 - how to use HARD drive recovery files to install Vista again

  I've read the threads that already exist, until anyone there sprang key of course, however I don't see the answers to my questions, so I hope someone can help.

  Basically my A300 has been regularly overheating and turning off, and after a recent instance of this, I left it disassembled and cleaned the radiator and the surround carefully.

  Unfortunately, reassembly, it became clear that Windows would not start, probably due to some problem caused by the most recent power cut or maybe even within my very careful disassembly?

  In any case, Vista does not start, in all modes, either standard, in safe mode or in repair mode. As standard, it screens with a message of error UNMOUNTABLE_BOOT_VOLUME blue etc.

  Mode of repair, windows bar logo and green rises, but then it just black screens and no more. Slight variation only I had here, it's that sometimes a white cursor rises, but still a black screen. I left the machine 30 minutes where there was a simple delay, but not... nothing happens, it just hangs.

  I have no CD of restoration, because I did not create one, but I was able to access all the files via the platform of Knoppix, and everything seems in order, so important HARD drive corruption seems unlikely.

  I see records to get Toshiba HDD and also Windows RE, so my question to you people is as follows; Is it possible that I can use these files that are still in tact to get Vista without buying a disc for £ 30 from Toshiba?

  My concern is, I don't see why the supposed recovery integrated does not work given that the associated files still seem present and intact on the disk, and I'm reluctant to lose 30 pounds on something, if it is not guaranteed to work in all cases.

  What would you recommend I do?
  My files are backed up and whatever is left is not important... I just want to restore my Vista more quickly, more simple, the cheapest possible.

  Hey,.

  Unfortunately I think that there is nothing you can do because the files are unnecessary if disk HARD recovery doesn't work because you must be able to access the Windows Advanced Boot menu.

  I agree with you, it's not good recovery disc HARD Toshiba doesn't work for you, but you must also understand s your fault if you didn't create the recovery disk as mentioned in the user manual. ;)

  So either buy you a new recovery disk or you are using a Microsoft Windows disk to reinstall Windows. All drivers and tools that you can download on the page of Toshiba.

• + Configuration LR to work out of the Photo files on external drive from the beginning very +.

  Hello!

  I have LR is trying to see how the workflow.

  I'm working on a project, I need to select the final images to use in the project of as a value of a year of photos.

  My main interest is using LR at the moment.

  I have all my files on an external drive.

  + First step is to import and then adding them to a catalog on my internal drive.

  + I select 'building intelligent insights' so I can work in offline mode

  Then from there, the process of selection and Keywords, etc..

  Does this sound right?

  ~ If I have other projects, I would create a separate in my computer for each project catalog?

  ~ would be metadata that I added in LR only incorporated on the files I use LR?

  I want to say is,

  If I was to go in my external drive from the desktop and place an image,

  What is metadata?

  Thank you!

  Sounds good.

  I suggest working with a single catalog only.

  LR does not change the imported originals - non-destructive workflow.

  You can write changes to a sidecar XMP file: basics of metadata and the actions in Lightroom

• I have a USB headset (made by zombee) and everything works fine except the microphone.

  The problem seems to be that my computer is using the built in Mic rather than the micro headphones, I encountered this problem several times.

  I don't know if it will work, but you can try to uninstall and turn off all other devices. If there is no other device Windows should, at least in theory, the only detected as a default value. When this is done, you should be able to reactivate and reinstall all other devices.

• DX9 games will work out of the box on Windows 7?

  This seems to be a big problem that Microsoft must address.  If you tried to play all games on Windows 7, you know that you will get error messages until you manually install DX9.  I thought that the versions of directx were supposed to be backwards compatible, so that dx11 is able to run a dx9 game.  But it looks like a lot of people to buy Windows 7, will do a little bit of a slap in the face, because none of their games will run until they perform this step.

  I would say Microsoft address this somehow, before release.

  DirectX 11 will not be included with Windows 7.  There v10.1.  When DirectX 11 is available, it can be obtained by download from Microsoft. Carey Frisch

• How to use a drive superdrive on pc windows 10

  How can I install drivers on a pc windows 10. I tried bootcamp but failed to get the right

  Which one are you?

• I have connected my laptop HMDI cable to my TV HMDI and everything worked well. Now my TV says there is no signal from the computer. Any advice?

  My cable is only a month and do not have any problem in a first time... do not find this one.

  Hello

  You did changes to the computer before this problem?

  Step 1: Again to check the connections and verify.

  Step 2: Update the video card driver.

  Step 3: Check that the TV has the correct input selected. Check the manual that came with the TV.

  Step 4: Perform the System Restore, restore to a date when everything worked well, on the computer.

  Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_vista-pictures/no-signal-on-tv-when-connected-pc-to-it-using-hdmi/2168c897-a7bd-4420-b4c8-2a4b10e90ccf

• Satellite P10: keyboard does not work because of the liquid

  Hello!

  I spilled coke on my laptop... Fortunately everything works fine. The problem is that some keys on my keyboard are difficult to the press following the coca cola and I don't know how to clean it. Is it possible to remove it to clean?
  I have a Satellite P10.

  Thank you!
  Penny

  Hello

  Well, you can carefully remove the keys on the keyboard. Then try to clean it with a damp cloth. This should help.

• How to use the find method to search for character format substitutions and FMP?

  I strongly suspect that I should be able to use the find method to search for paragraph substitutions and format as these options are available in the Find dialog box. However, because of the excruciating Extendscript documentation from Adobe, I not was able to find the key pieces of information that I need. I found these constants:

  • Constants.FV_FindPgfFormatOverride
  • Constants.FV_FindCharacterFormatOverride

  But he has literally no information about them. It is not yet a definition, so I'm actually just a guess. However, I think that I need to somehow use these constant within the parameters of the Find method. Any ideas on how to do it?

  You're right, there are still some bugs to work out of the documentation, although it has already improved since I started w / Extendscript last summer.

  Find two constants must be defined as the ival for a PropVal FindObject, for example:

  var myDoc is app. ActiveDoc;

  var docStart = myDoc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;

  tloc var = new TextLoc(docStart,0);

  var findParams = AllocatePropVals (1);

  findParams [0].propIdent.num = Constants.FS_FindObject;

  findParams [0].propVal.valType = Constants.FT_Integer;

  findParams [0].propVal.ival = Constants.FV_FindCharacterFormatOverride;

  myDoc.Find (tloc, findParams);

  Depending on what you're trying to accomplish, you can also take a look at the property FormatOverride of the Doc, bmp and item objects.

• NB200 and Windows 7, everything works perfectly!

  Hello

  I installed on my NB200 Windows 7 on a second partition. I downloaded driver from toshiba support site 30 or more files. After installing some features did not work on my Windows 7 operating system. While looking for a quick and simple solution to this problem, I found the perfect downloadable file.

  * Toshiba Software install for Windows 7 *.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=2475695&PF=true

  I left the software to download and install all the necessary software drivers automatically. Once my computer was restarted, everything worked perfectly!

  This seems very useful, wander if it only works on US models.