Everytime I turn on my printer it prints a test page.

Similar Questions

• How can I stop my HP Photosmart to print a test page everytime I turn it on?

  I finally got to what I saw even if the model number on the screen is another for the model that I have my printer, but now it prints a test page everytime I turn it on. How can I stop this from happening?

  Hello

  Check with HP, their drivers support and documentation online and ask in the forums of HP on known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Maybe uninstall and reinstall is the correct option - check with HP.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I need to know how to disable the test print cause everytime I turn on the printer prints featured.

  I need to know how to disable the test print cause everytime I turn on the printer prints featured.  It is hp1315 series.

  Hello

  If you want to disable printing test page, you must check with the manual of the printer. Try the steps from the following link:

  An alignment Page prints whenever the all-in-one is turned on or off or a print job is started
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01336397&cc=us&DLC=en&LC=en&product=1146336&tmp_track_link=ot_search

  I suggest you to contact HP for better support.
  http://h30434.www3.HP.com/T5/printer-all-in-one-software/BD-p/software

  Additional information:
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c01577197&lang=en&cc=us&ContentType=SupportFAQ&prodSeriesId=360489&prodTypeId=18972

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Everytime I turn on my printer, printer starts to do the alignment of toner

  Everytime I turn on my printer, after a few minutes it starts to do the alignment of toner. I think that the alignment must be done that when I change the toner, I'm good? So I think that this alignment whenever I turn it on can be kind of a problem. Any suggestions to fix this?

  Printer model: HP CM1415fnw all-in-One

  It's probably the default action (I don't know about you, since I don't have one of these printers).

  Via the integrated Web server (that is to point your browser to the IP address of the printer), look for the System. Print quality menu.

  Check or change the values for the calibration of market (default = 15 minutes) and the calendar of calibration (default = 48 hours) points.

• I have a psc 1510. How to print a test page everytime I turn it on?

  I would like the 1510 PSC DO NOT automatically print a test page everytime I turn on the printer. I don't do a lot of printing, so I don't want to waste paper by the presence of an extra page printed up evry time I want to just print a few pages. Is there a way to disable this test to the start page?

  I use the PSC 1510 on a Mac, OS X 10.6.8.

  Hi there owen13,

  This sounds like the alignment page must be scanned. This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

  Good luck!

• HP Deskjet 3630: everytime I turn the power 'on' the printer prints the test page. HP DESKJET 3630

  This is a new printer. I think it very strange that he should do.

  Hello

  Thank you for using the HP Forums.

  Have you done the alignment for cartridges successfully? ANC, you check out this post to see if it will help to solve your problem?

  http://h30434.www3.HP.com/T5/inkjet-printing/why-does-my-DeskJet-2540-always-print-a-test-page-every-time/TD-p/3519477

  Hope that helps!

• How can I get my printer to stop printing a test page every time I turn it on?

  everytime I turn on my printer a page is printed. I would like to stop this.

  Hi TerriValenzuela,

  ·         What is the brand and model of the printer?

  ·         Did you the latest changes on the computer?

  I suggest you try the steps mentioned below and check if it helps.

  1. click on start, devices and printers.

  2. right click on your printer, select properties and all of the tabs look for a radio button titled "test page printed on startup."

  3. uncheck this option.

• PSC 1350 all prints a test page every time when turned on

  After changing the cartridge, we printed test page.

  Now, whenever we turn on the printer it prints test page automatically.

  How to disable this option?

  Thank you

  Hello vancat,

  If your problem is that your PSC 1350 prints a test page when it is turned on or after every printjob, it is very likely because the cartridge alignment process is not finished. After you have installed a new cartridge in the printer, it will print an alignment page. You must take this page and place it on the scanner glass (make sure that the top of the page is in a good way), then you press the "Scan" button on the printer itself. It will scan the page (that is, read the page) and full alignment process (so it is not scanning in the sense that it sends an image to the computer).

  I hope that clarifies the process of alignment slightly.

• 1025nw Jam in Drum area - attention LED still flashes and cannot print the test page

  My Laserjet PRO CP1025nw is only 3 weeks. Everything was normal until I met a paper jam today. I removed the damaged document by opening the back cover and the piece of paper remaining from the feeder. But still, printer flashes driving caution.

  I turned the printer off and then back on and tried the instructions in the user manual to clear paper jams. When I turn on the printer, all lights are turning ON one (as the normal boot sequence) and then warning led flashes. I couldn't hear any engine wheelchair or his mechanics during this process. Web server page printer (with wifi) showed the status of the printer as "jam in the drum area.  I removed and re-inserted Imaging drum by following the instructions to replace the imaging drum.

  What I see after turning on th eprinter is just attention light flashing and I can't even print a test page. I don't hear any rotation of the engine sound of the printer. Pleas help me out of this problem.

  I solved the problem myself. Although I couldn't find any piece of paper left by normal inspection of the outside of the printer, I removed the Assembly / separation and roll pick-up from the input tray to find a small piece of paper remaining on the paper sensor flag. Very hard or literally impossible to find something in this place by the normal health check.

  To eliminate the epickup roll pre-assembled under th eprinter th, I removed the right side panel and the left side panel for th eprinter. I was happy to see the piece of paper that has ruined my day quiete. Deleted and everything set up as before and successfully took a test page print.

  Thank you for repair of HP, which led me to get inside the printer.

• HP deskjet 5150: printer continues to print a test page

  Just installed new black ink cartridge and now the printer prints a test page every time that the printer is turned on and after each print session.

  Hello @dglas_1,

  Welcome to the forums of HP.

  I understand that your printer can print a test page.

  I would like to help.

  Since the problem occurred after you installed new black ink cartridge, I suggest the following.

  Stall and reinstalling the cartridge

  1. Switch on and open the cover or top cover.

  2. Remove the cartridges.

  3. Reinsert the cartridges.

  4. Close the housing cover or top cover.

  5. Voltage of the unit by turning off the printer for a few seconds.

  6. Turn on the printer.

• HP Pro Plus 6800: error 0 x, 00000057 wireless and wireless Direct properties of the Windows Control Panel printer - print a Test Page

  I have a laptop Toshiba Satellite of Win7 64 bit and a HP 8600 Pro Plus,
  update firmware and drivers about 2 weeks for the 8600 was a
  a long time I have been updated, which is connected wireless has decided to
  Direct to print Wireless Setup once the program installation, I tried to do a windows
  Print the Test Page in the printer property Panel, somewhat normal for
  set up a printer

  Under the connection of the conciergerie, I got the error message 0 x 00000057
  Under wireless direct printing, I got the same error 0 x 00000057

  After spending the time to check the settings, connections and asking
  Why? I decided to see that if I could print the docs, I print a PDF file,
  Notepad and Word documents in each application under the two
  configurations without problem.

  Under the wireless connection, I started the Web Services module
  and was able to make the impression within the Web Services Test page
  module without problem could not yet do the printing Test Page
  in the printer properties panel.

  I ran Print and Scan doctor who, to my surprise mentioned
  a conflict of Driver, I welcomed this program to uninstall the driver,
  went looking upward for the driver and the same driver was so done
  No download but to remove the driver and reinstalled the driver.
  Always error message here.

  I'm now tempted to delete a direct print wireless and see
  What happens if the error disappears, if she does not unstall all
  associated with the printer and do a clean reinstall. In case of emergency
  is there an alternative to the use of the Web Service module to the setting
  When not connected to the wireless network?

  I think that the Panel of the printer would do this (I'll watch this later

  spend enough time on it), or do I need to run Web Services to

  direct wireless installation, just think about this, otherwise I'll shoot

  a usb cable.  Maybe if I install Direct wireless on the printer control panel

  the message will disappear as the installation of the printer program, not software

  on the laptop?

  It is a minor problem since I can still print but question why!

  See other issues about this error message I thought

  spend my experience with this error.

  Always had a number of things to think and try, once again.

  If your getting this error message I would suggest trying a test page printed

  within the module of Web Service to see if the message developed.

  Could not back the driver so I removed the printer driver

  by deleting.

  19/07/2011 Date print driver
  Print driver version 26.0.0.0

  and removed software in Add and Remove software Hp also had to turn

  disable the wireless module directly on the printer to reinstall from the CD.

  Reinstalled printer/software form the CD supplied with the printer, the

  Driver date is 08/12/2009 Ver.9.0.0

  No more error in configuration.

  is the answer to the error message 0 x 00000057 or 0x00000xx

  associated with the driver? Or just the 0 x 00000057?

  Could not find a list of drivers between the driver and

  the driver on the CD.

  Will not update the driver for a good while or until I have too.

  The dates on the drivers are only about two years apart, the

  The version numbers are an issue questable.

• HP PSC 1402 - stop printing a test page

  How the hell can you stop the bloody printer waste by printing a test page whenever it is turned on?  I use a mac with os10.6?

  Thank you

  I found this
  Richar J wrote:
  This should solve your problem

  Please follow exactly and IN ORDER.

  1 turn the printer off and wait 10 seconds. Restart

  2. let the printer print test page.

  3. when the test page prints, unplug the USB cable, the printer connected to your computer. DO NOT turn off the printer, unplug the USB cable.

  4. place the test page to the scanner glass, and then press the SCAN button on the printer. The indicator light flashes that the page is being analyzed.

  5 remove the test page when the light is fixed.

  6. Finally, turn the printer off and wait 10 seconds. Then turn on again. Printing test pages is no longer! Yay!

  (You can now reconnect the printer to your computer with the USB cable).

  http://answers.Yahoo.com/question/index?QID=20090315205040AAlQM5h

  

• How can I keep my HP1510 all-in-one to print the test pages as much?

  How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.

  Pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process.  If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.

  The alignment page will stop printing when the alignment process is complete.  See the page here for more information.

• Printer keeps printing a test page after each print document

  I have a HP Deskjet 970Cse on Windows XP Professional with Service Pack 3.

  About 2 weeks ago, I was receiving ambiguous messages on the ink levels, for example, saying a cartridge was ink when it was not, and after checking and replacement he told me the other cartridge was bad or empty.

  I replaced the cartridges with new and error messages went. To test others, I replaced the previous game and they worked well without empty messages.

  Then one day my computer tells me it was installing the HP printer and now I got 2 copies.

  I uninstalled the drivers and printers and downloaded the last at HP (the same I was already running years) and now it prints a test page after each print job that is wasting ink. By the print job, I mean it prints a test page once all the documents in the print queue. On the rare occasions that it will print a test between each document but this page is not the standard.

  Any help would be appreciated.

  Andy, honestly with a printer is 10 years and more, the problem you are experiencing may deal with the age of the device more than anything else. You could try hard-reset of the printer (leaving it unplugged for 20 seconds), but if what you said about the button is true - it is possible that the Board of Directors is signaling the machine to print a test page after each draw by a malfunction at the hardware level.

  In this case, maybe it's time for a new printer. If you need help to choose one, there are many solids Deskjets currently on the market from HP that would be a wonderful substitute for this machine.

  Let me know and have a great day!
  

• Office Jet 6000: cannot find how to print the test page with Office jet 6000

  I can't find in the properties of this printer HOW to print a test page. I was running out of ink black, and all color cartridges are rather recent and not on show at low levels. But, after replacing the black cartridge the first doc to test printed came out very uneven and unreadable.  There is no error message.  How in diagnostics on this printer to test the printing?  I tried not to print a doc of color (as photo) yet.

  Can I update the driver?  Help, please.

  Hello

  Test print page options under properties of the print driver for your device.

  But I don't think that solv your problem.

  You must print alignment and another test for correct print quality problems.

  Here is the HP site, gives detailed instructions form document.

  http://support.HP.com/us-en/product/HP-OfficeJet-6000-Printer-series---E6/3866939/model/3866950/document/c01708575/

  Good impression