Evolution of start up programs

Similar Questions

• How to get removed from the start menu programs?

  Hello

  I stupidly deleted my file of all programs on the start menu (by chance).
  He emptied the folder programs on the start menu through Explorer windows as well.

  I still have access to all of my programs seeking for them or through the program files. How can I rebuild my Start menu to the original WITHOUT reinstalling windows or something like that.

  Unfortunately, I can't do a restore because it is configured to do a clean up of all old restore points, and he did it about 5 minutes before the problem occurred.

  PLEASE HELP ME!

  Tom

  Go to my computer
  There, you have to choose the system partition.
  Then *-> Document and settings of-> username you-> start Menu programs *.

  Need to create shortcuts to the programs and applications that you want in the start menu.

  Concerning

• HP Pavilion g7 1178 AC: windows jingle/tune does not sound and the start up programs do not start before the RESET

  When I start my computer, I have the lock screen, enter my PIN and then nothing really happens, I get all the blank screens or error messages just my old image of the windows desktop 7, then I RESTART my pc and then I get Windows Small Volkov song/jingle/air once it starts again , then my lock screen and then my start up programs start at work, bitdefender, toolwiz and things are working properly.  I removed my old windows, clean up the files using the disk.

  I do not understand why the windows little tune does not make its sound until I restart?  Does this mean that windows is does not start properly until I restart?  And would that be why my bitdefender is does not properly start as well. ?

  I checked in the Task Manager after the first start-up, he said that the two programs have been activated, but they do not work properly.  I checked bitdefender and it also says that it is on the startup list, but why he doesn't have the things I have planned to start rebooting?

  It is very frustrating having to start my pc, wait a while, then do a reboot to get things every morning.  Suggestions, ideas, help would be greatly appreciated.

  Thank you for your time, sincerely, Niki

  I too was wondering why * nothing * played, even when I had checked the box "Play Windows startup sound" in the advanced sound settings > Sound > sounds section. After a LOT of research (that brought me here, among others) here are the "definitive"...
  
  "By Raymond Wong2015-07-31 13:30:22 UTC.

• How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point

  How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point. I've been messing around with the without success. I'm under Labview 2012.

  Thank you!

  Townes wrote:

  I can't understand what you mean. I have no formal training with labview. It took me a long time to write the simple program that I joined. Any guidance would be greatly appreciated!

  Its pretty normal for a beginner to take the time to write code. Right-click the map of waveform > Create > property node > historical data, you will get a property node, keep this at the beginning of the code and create a constant. You can also go to the VI properties and > run and select "clear indicators when it is called.

  I recommend you to go through the basic materials of LabVIEW which will give you an understanding on the basics of bases/components of LabVIEW.

• How to start the program without the run button

  How can I start the program from the moment I opened the vi?

  without the use of the race.

  Thank you

  Under properties for vi, performance, click on run when open as in the screenshot of Jeff . Do not post any code set to run when open forums!

• I get an error message at the beginning: "Problem starting C:\Program Data\IntelBackup Online.dll"

  Original title: I get an error message at the beginning upward:

  "Problem starting C:\Program Data\IntelBackup Online.dll" under this line, it is said: 'the Spicific mode is not found' how can I fix?

  Hello

  ·         What operating system do you use?

  ·         Were there recent changes made on the computer before the show?

  Follow these steps and check if that helps.

  Step 1:

  Check if you have the similar problem with safe mode, otherwise you can try to put your computer to a State of clean boot in normal mode and check if that helps:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

   

  Step 2:

  Follow the article to perform the clean boot on the computer:

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

   

  Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

• 6520: problem starting c:\Program HP HP Photosmart 6520 series\bin\HPStatusBL.dll

  I uninstalled the HP 6520; didn't uninstall errors. [do not remember if I uninstalled with a 6520 uninstall exe or if I did it with Windows 10 uninstall programs.]  Now, every time I start my PC, I get an Error Message window indicating "there was a problem starting c:\Program HP HP Photosmart 6520 series\bin\HPStatusBL.dll the specified module could not be found."

  I have a Photosmart C7250 which is attached to my router via LAN as a network printer and works as it should.

  I would like to get rid of the Photosmart missing dll error, but, not at the expense of ruining the c7250.

  The 6520 file is missing, the 6520 has been correctly removed from devices and printers.  Why my PC is still trying to load a dll missing at startup after that the 6520 6520 was supposed to be uninstalled?

  How can I fix the error starting 6520 without spoiling the C7250?

  Hi @PineSap,

  Welcome to the Forums of HP Support! I see from your HP Officejet 6520 uninstalling you now this error message ' there was a problem starting C:\program HP HP Deskjet 1510 series\bin\HPStatusBL.dll .

  " The specified module could not be found ' at startup.

  After some research, I was able to find this solution on Forums, see below:

  For Windows 10 publication RunDLL error (HPStatusBL.dll) check this site:

  (Activate prior the hidden files and folders)

  C:\Users\(your user name) \AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup

  (Maybe depending on who has installed the software, see other users if you do not do so in your profile)

  Remove the shortcut that HP does not decently cleanup during uninstall:

  Monitor alerts of ink - HP xxxxxxxxxx -Source

  I hope that this helps, please let me know the results. I'll watch for your reply.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• I lost my accessory under Start, all programs, and accessibility.

  Original title: Technical Support.

  I have Windows XP Home Professional with Service Pack 3. I lost my accessory under Start, all programs, and accessibility. I want to use the calculator, but he's not here, I mean Windows components. They were deleted for a reason. He questioned the Service Pack 3 Cd, but I have only the CD with Service Pack 2. How can I reinstall them?

  System File Checker will not work for you for two reasons:

  1. He will ask the installation CD XP sp3 - which is not
  2. Even if you have the correct CD, this isn't what SFC

  Instead, see AccRestore - restores the missing Accessories group shortcut (this is a web site with confidence you can securely download the zip file, after you download the file, do a right click and "Extract all" and then double-click on the extracted exe file)

• I am running XP Home Edition, when I right click on an icon/folder on my desktop, I get a fatal error message of "unable to start this program because it lacks the 'resources' directory or one of its subfolders. __

  I am running XP Home Edition when I right click on an icon/folder on my desktop, I get a fatal error message of «unable to start this program because it lacks the "resources" directory or one of its subfolders» How best to solve this problem without reload my OS which would be suh a pain that I've been running with it for many years and to return to, where I'm now should always be! »

  Right click issues are usually caused by third party software who pushed himself into the context menu. This is more easily managed using the ShellExView free program.

  http://www.nirsoft.net/utils/shexview.html - ShellExView

  Make a right-click is slow or weird behavior caused by context menus management - http://windowsxp.mvps.org/slowrightclick.htm
  Manage the entries in context menu for folders, readers, and the Namespace objects - http://windowsxp.mvps.org/context_folders.htm MS - MVP - Elephant Boy computers - Don ' t Panic!

• No 'defragmanting' or 'disk cleanup' in my ads start/all programs etc.

  I use XP. There are no ads for cleaning disk or Defrag in my "start / all programs/area: How can I perform these actions, and how do I get them listed? Thank you!

  Hello

  You can consult the following address:

  C:\Documents and Settings\All Users\Menu Menu\Programs\Accessories\SystemTools

  Find System Tools folder and recreate the shortcut for cleaning disk and Defragmenter in
  Disk Defragmenter = "C:\Windows\system32\dfrg.msc.
  
  Disk Cleanup = "C:\Windows\system32\cleanmgr.exe.
  See also:
  The accessories program group is not displayed on the menu all programs in Windows XP
   
  http://support.Microsoft.com/?kbid=891893

• When I click on START / all PROGRAMS /, most programs do not display on the screen.

  I had a problem with a virus. Used Microsoft security programs to remove it. However, when I click on START / all PROGRAMS /, most programs do not display on the screen. Any ideas on how to solve this problem?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 2:
  Create a new user account and check if it helps:
  http://support.Microsoft.com/kb/279783

  It will be useful.

• How do you start "help and support" everytime I try the? Mark my computer says to start the program

  I must have deleted at one time or another, I have re-installed my updated windows program in place the disc but it says to start the program, how can I do this?

  Hello

  ·         What is the exact error message?

  To solve this problem follow these steps:

  (a) click the Start, run menu. In the Run menu box type in:-services.msc and click OK or press the Enter key.

  (b) in the Services (Local) window scroll up to the help and Support and double-click it.

  (c) change type start Automatic and service status "Start."

  (d) click OK/apply.

  See also:

   

  Menu help and bootable media will not open

  http://support.Microsoft.com/kb/555329

  I hope this helps.

• When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up

  When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up.  The header says 16-bit subsystem MS_DOS.  For example, when you try to start Microsoft Word, the message says:

  C:\Documents and Settings\All Users\Menu demarrer\programmes\microsoft Office\Microsoft Office Word 2003.lnk program invalid file name, please check your pif file.

  I can start the program by clicking on any document in my documents file, however.  I know that something is messed up in the registry (we had a bad worm (MS Removal Tool).  However, I can't a registry cleaner to open.  I used a WinXP_EXE_Fix.reg to try to fix the missing exe file.  He has set a number of things, but still will not let me run a registry clean.

  Any help?

  Hello

  Try the following steps:

  1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Too many programs listed to display correctly in "start - all programs.

  When I 'start' 'All programs' there are programs on the far right of the screen that are not completely.

  Right click on the Start button and choose "Open All Users" (or simply open if you have set things so that other users on your computer do not see the same list of "All programs" you do).

  Double-click it to open the folder programs.

  Create subfolders (File > New > folder) and move the links in them if necessary.

  For example, I have 3 different apps that I can use to display files of different types: ACDSee, IrfanView, and QuickViewPlus.  Rather than having 3 entrances separated on my list of all programs, I created a folder named viewers of files and records containing shortcuts to the applications in there.

• Unable to start this program because the "Resources" directory or one of it subdirectories is missing.

  Can someone tell me what to do. It says... cannot start this program because the "Resources" directory or one of subdirectories is missing. Please try to reinstall this program.

  I'm not very stalled on computers and do not want to delete something I shouldn't.

  original title: directory of resources

  Hello

  1 did you change on your computer?

  2. what program you are causing this problem?

  3. when exactly did you get this error message?

  Method 1:

  I suggest you perform the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you to uninstall and reinstall the program from the link and check.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program