Exact differences between two images

Similar Questions

• By selecting the difference between two images

  Hello

  I have two photos exactly the same thing that I took using a tripod, studio lighting and general conditions. However, in the second photo, I inserted a subject - in this case a sculpture complex. Photoshop can merge these two images together AND choose so the difference between the two images - in this case the sculpture complex?
  
  

  Basically, I need to select the sculpture and do not want to spend time manually selecting due to its complexity. I need to separate the background and the sculpture for editing on their own layers.

  Thank you

  Stephen-CS3

  You posted this in the two forums, its been answered in the mac forum.

• SPOT the difference between two images

  Posted earlier but I think I wasn't clear.

  My problem is you need to do the correct brand/animation to appear when the user clicks on the two hot spots (like spot the difference of the issue type) and ofcause that must also be marked as a correct answer... Please refer to this quiz http://genworth.com.au/webapps/fraudquiz/

  If you can click on the picture on the left and then the right picture (in a sequence any), then you will get correct answer layer appears...

  This single slide have also several issues like this... like date of birth left and right...

  Also note how it says answers from users like 1 / 3 if only one has been found corectly then two, such,.

  Thanks Masters in advance!

  Grasshopper... a Word to the wise... You double post this question, that will upset just the masters very "advance" whose wisdom looking so humbly.

  I replied to your post in the other thread.  Go and apply.

• Difference between two data aquistion

  Hello

  I got a data aquistion system that is supposed to keep data acquisition selection until the difference between two points a lot. For example, I get voltage (mv) as 2.31, 2.32, 2.34. 2.33 2.32, 2.33 2.32. the data up to a point, say 0.1V higher or lower than the first. Thewhole procss stop. Thank you for your suggestions.

  Try this... (Labview 8.2)

• difference between two dates in the year/month/day in Obiee

  Hi gurus,

  I know this question have been asked and answered several times but I have a requirement that is a little different, then the previous ones.

  I want to calculate the difference between two dates in OBIEE10g in year/month/day format similar to the below SQL output

  SQL > select end_date, start_date,

  trunc (months_between (end_date, start_date) / 12) years.

  months of mod (trunc (months_between (end_date, start_date)), 12).

  End_date - add_months (start_date, trunc (months_between (end_date, start_date))) days

  t

  Thanks in advance

  SK

  Search for this

  "TIMESTAMPDIFF IN THE FORM OF MTHS # YEARS."

  or else

  To get the current mandate of employees since the date of hiring in the form of # years # mths or # year (s) # month (s)

  Concat (concat (cast (TIMESTAMPDIFF (SQL_TSI_Month, "Employee attributes". (((' ' Hiring last Date employee ", CURRENT_DATE) / 12 as char),"Year (s)"), concat (cast (MOD (TIMESTAMPDIFF (SQL_TSI_Month,"Employee attributes". (((((' ' Hiring last Date employee ", CURRENT_DATE), 12) as char), 'Month (s)'))

  Concat (concat (CAST (TIMESTAMPDIFF (SQL_TSI_YEAR, "Employee attributes". (((' ' Hiring last Date employee ", CURRENT_DATE) as CHAR),"Year (s)"), concat (cast (MOD (TIMESTAMPDIFF (SQL_TSI_Month,"Employee attributes". (((((' ' Hiring last Date employee ", CURRENT_DATE), 12) as char), 'Mth (s)'))

• difference between two timestamps

  Hi gurus,

  I have a procedure which has 2 input parameters of type timestamp. I need to find the difference between these two stamps and be converted to a timestamp and return. Help, please

  Diifernce between two timestamps is interval. You can not convert the difference between two timestamp timestamp and it makes no sense. What you expect:

  25/06/2014 11:25:37.524000 - 13:07:22.987654 20/06/2014

  SY.

• How do the time difference between two dates?

  Hi all
  
  I use this query to get the time difference between two dates.
  
  Select to_timestamp ('2012-10-03 12:00 ',' YYYY-MM-DD hh)-to_timestamp ('2012-10-03 11:00 ',' YYYY-MM-DD hh) as double diff;
  
  but do not get the correct result.
  
  Thank you

  Left KEY... Left Padding of tanks.

• Difference between two times

  I am building a working method in LiveCycle, and I want to track how long the procedure takes. To do this, I have two time fields, and then a third time field to find the difference between two time fields. Looking at other posts to discussion, I could find a Javascript code that was part of what I wanted, but I can't get the third time field to display in the format I want. I tried to change the habits of the fields and that did not work. Could someone offer some advice on how to change the format or help me with the code?  I couldn't figure to attach the actual file, but I have attached a picture of the PDF file and the Javascript code I used.  If you look at the TimeIn (hh: mm) and time (hh: mm) areas (on the photo, I have attached), you will notice that the TotalTime comes out like HMM, and I want that it out as hh: mm.

  

  

  Any help would be greatly appreciated!

  Thank you

  this.rawValue = (totalHrs > 9? String (totalHrs): '0' + String (totalHrs)) + ':' + (totalMins > 9? String (totalMins): '0' + String (totalMins));

• How to find the difference between two dates in the presentation layer

  Hi gurus,
  
  Hello to everyone. Today, I came with the new requirement.
  
  
  I need to know the difference between a date and the current date in the formula column application presentation layer.by.
  
  
  
  Thank you and best regards,
  Prates

  Hi Navin,

  TIMESTAMPDIFF function first determines the timestamp component that corresponds to the specified interval setting. For example, SQL_TSI_DAY corresponds to the day component and SQL_TSI_MONTH corresponds to the component "month".

  If you want to display the difference between two dates in days using SQL_TSI_DAY, unlike butterflies SQL_TSI_MONTH and so on...

  hope you understand...

  Award points and to close the debate, if your question is answered.

  See you soon,.
  Aravind

• Calculating the distance between two images... ?

  Hello

  I'm trying to calculate the distance between two images (A and F - there are other images between A and F), but I can't seem to understand how to make good sense.

  Image A.x is "(stage/2)-(A.width/2)" and the image of F.x is "provable - imgSpace" which is a negative value (all images x is a negative value for image A.x). "

  In my view, the calculation is F.x - A.x, and although it could be good I still ned the value to be non-negative.

  Does anyone know how to do this?

  Thanks in advanse...

  I think you can find out the distance with this equation,

  var len:Numer = Math.abs (A.x - F.x);

• Illustrator CS3: How to calculate the exact distance between two points?

  It comes to my line.

  

  I have to measure its exact length. How can I do?
  If I use the measure tool, the cursor does not select the snap points, so I have only an approximate measure.
  Is there a quick way to calculate the exact distance between two points?

  Flying document Info Palette menu: turn on the SelectionOnly and objects. The palette will show you the length.

  JET

• Find the difference between two date and time

  Hi friends,
  
  I wanted to find the difference between two date and time, but my qury is slightest error "invalid number."
  
  

  select sql_step_num,proc_name,run_seqno,start_date,end_date,(to_char(start_date,'HH24-MI-SS') - to_char(end_date,'HH24-MI-SS') ) as ed  
  from eval.EVAL_RUNTIME_DETAILS
  where trunc(start_date) = trunc(sysdate) 
  order by sql_step_num;

  You try to get the feel between two char strings.
  And more difference between two dates gives a NUMBER of days.
  Try this:

  select sql_step_num,proc_name,run_seqno,start_date,end_date,numtodsinterval(end_date-start_date,'DAY') as ed
  from eval.EVAL_RUNTIME_DETAILS
  where trunc(start_date) = trunc(sysdate)
  order by sql_step_num;
  

• layer style settings to remove the differences between 2 images.

  Hello people,

  I have a question:

  Is it possible to get the layer style settings when I have 1 picture with the layer style and 1 without him.

  Let's say I have an icon that's just a House.

  [img] http://S6.PostImage.org/xfpzl5hl9/image.PNG [line]

  And I have a House with outer glow.

  [img] http://S6.PostImage.org/h6un7v2a5/0_h.PNG [line]

  Is it possible to get the parameters used in the outer glow?

  hosts Ruud.

  You will not get the real digital settings, but if you load the two layers in the same document and change the blending mode of the layer that is greater than the difference, you can see the difference between the two images.  So:

  

• Difference between two statement.

  I use 11.2.0.3 oracle version, and when I am running below pieces of code and expect similar results.

  Below is the variable declare package level as below.

  TYPE mycur IS REF CURSOR;

  Now mentioned below is my procedure inside the package. My question is, I want to understand the difference between the following two statement in the same procedure. as as statement: 1 give me several records to pk1, where as statement: 2 gives me the good result which is recorded under the outlet of the slider back.

  Statement: 1

  PROCEDURE p1 (pk1 in NUMBER,
  ret_cursor ON mycur)
  AS
  
  BEGIN
  Open Select ret_cursor *.
  A,.
  b,
  WHERE a.id = b.id
  AND (a.c1 = b.c1
  GOLD a.c2 = b.c2)
  AND a.c3 = pk1;
  
  END;
  /
  
  Statement: 2
  
  PROCEDURE p1 (pk1 in NUMBER,
  ret_cursor ON mycur)
  AS
  V_QUERY VARCHAR2 (4000);
  
  BEGIN
  V_QUERY: =.
  "SELECT."
  A,.
  b,
  WHERE a.id = b.id
  AND (a.c1 = b.c1
  GOLD a.c2 = b.c2)
  AND a.c3 = ' | PK1;
  
  Ret_cursor OPEN for V_QUERY;
  END;
  
  

  actually my mistake, I just the reason behind the question. I had published the name of the table variable / by their and are different than real.
  So the question was naming convention given by the developers, the name of the input variable looked exactly like that of the name of the column, it's why he estimated at something like 'and (1 = 1)'.

  The input variable name has been 'c3' as column name 'a' causing problem.

  a.C3 = c3

• Difference between two rows in a table.

  Hi all
  
  I have a requirement where I need to calculate the difference of a column, but the values are in two rows.
  
  Its exactly like that, I'll have a table where I have stored incidents with their status and their modification dates
  
  example:
  Incident_Id: Status: Modified_Date (in seconds from a specific date)
  1: 1: 9080890
  1: 2: 9080999
  1: 3: 9081900
  2: 1: 10000900
  2: 2: 10001000
  2: 3: 10002000
  
  Now there I show the time spent by each incident in each State.
  
  That is to say for the State 1 I need the difference between the date of change of condition 2 and updated the date of status 1 Similarly
  
  2 necessary status the difference between the date of change of condition 3 and updated the status date 2 and so on.
  
  the real result, I need is like that
  
  Incident_Id: Status: Timespent
  1: 1: (modified_date (status2) - modified_date (status1))
  
  
  Please help me to write the query to do this.
  
  Kind regards
  Tauceef

  Can we assume that the lines are classified according TO the event status ?
  This (i.e. an Ordering) is necessary in order to systematically identify consecutive lines.

  Please try the analytical function LAG and less to the current value.