Is there a single SCXI module adapted to the entries for mixed probes?

I'm trying to set up an SCXI system to receive signals from a number of different types of sensors. I have a large number of thermocouples for which I decided to use the SCXI-1102 module. I also have a unique pressure sensor (unknown spec so I'll assume type of strain gauge), a unique accelerometer (once again, unknown technique) and possibly a few tensions ahead right (unknown County and spec so assume - 10 v to + 10 v Beach max).

Is there a single SCXI module through which I can acquire voltage signals, accelerometer and pressure sensor? Or maybe just use 2 modules instead of 3 if I have a SCXI-1530 for my accelerometer and an another module for the tensions and the pressure transducer? I was watching the module SCXI-1121, which looks promising for the tensions and pressures but then was unsure as to what block of connection to use for the combination of signals (possibly, I could live with a - 5V to + 5 v range if necessary).

(Additional info: I use TC-2095 blocks with my SCXI-1102 module, can not really use spare entered on those voltage inflows).

Thanks for any help.

CASE NO.

It's expensive,

Thanks for your inquiry. You obviously already did a lot of research on this issue. I fear that it is unlikely that you will be able to use a single SCXI module to perform any function you listed. Necessary accelerometers such air conditioning specialist, it will take a module - as you mentioned already, something like the 1530 (4 channel accelerometer input module) would be ideal.

However, you have a number of different options for the pressure, voltage and temperature measurements.

For example, you could buy a mudule 1520 for your measurements of pressure and then use a generalist 1102 b for voltage and temperature (need you the connection block insulated from 1303 to condition the thermocouple readings... and work around the CYC technology for pressure readings).

Or, you may use the module thermocouple 1102 for your temperature readings and then use a 1102 b to take pressure readings and the pressure. Of course, that would require making your own bridge to the pressure sensor configuration, but this should be pretty easy.

Before making any final decision, I would recommend that you call your local branch of the NC and speak with a sales representative. Perhaps, a member of the sales field staff might actually come see discuss you it face to face.

Finally, it looks like you have a number of ways relatively high for some of your reading, is why you decided to use the SCXI platform. I was just wondering if you had considered compact DAQ (cDAQ), which combines the DAQ hardware with signal conditioning. Top spec, ease of use, lower number of channels. Swings and roundabouts I guess.

I hope this has been of some use to you.

Best wishes

Tags: NI Hardware

Similar Questions

  • Is there a manual or a Guide to the user for the Acer Chromebook?

    Is there a manual or a Guide to the user for the Acer Chromebook?

    My Chromebook did not come with one.

    I would like a link to a page with a User Guide or manual for the Acer Chromebook user.

    Thanks for your help.

    Hello..

    http://global-download.Acer.com/GDFiles/document/QuickStartGuide/QuickStartGuide_Acer_01.01.02_A_A.p...

    LC = en & BC = ACER & SC = PA_6

    Click on the link above to download the Chromebook user guide.

    http://www.chromestory.com/100_Chrome_ChromeOS_And_ChromeBook_Tips_Ebook.PDF

    Click the link above for the Chromebook Ebook

    Concerning

  • FRM-30085: unable to adapt to the shape for the release.

    Hi all

    When executing the form to get the following error.

    FRM-30085: unable to adapt to the shape for the release.

    How to adjust the form to exit please help me thanks in advance.

    Sarah

    If you try to open a previously saved forms 10.1 form forms 9.0.4
    you get this error without any additional message if you try to compile forms 9.0.4.

  • Is there an add-on that will change the defalt for only a single Web site text size?

    I would like to change the size of the default text of a site without changing anything else. E.g. onelook.com. Can I change the size of several ways, but I have to change it every time I'm looking for a Word. I don't want to change windows or Firefox. Just this site.

    Make sure that you are not Firefox running in permanent private browsing mode (don't remember history).

    In case you use 'Clear history of Firefox closing' or otherwise to clear the history.

    • do not delete Site preferences
    • Compensation of the "Site Preferences" clears all exceptions for cookies, images, pop-up windows, installation of software, passwords, and other specific data from Web site.

    You can also check for problems with the content file - prefs.sqlite in the Firefox profile folder.

    Also check on the topic: config this site specific zoom page is enabled.

    You can open the topic: config page via the address bar.
    You can accept the warning and click on "I'll be careful" to continue.

  • Is the wireless adapter in the Duel for the DV7-7201tx want to strip?

    Hello world

    Quick newby question...

    Is the card the ENVY DV7-7201TX laptop wireless a capable type band duel able to send/receive on the 2.4 GHz and 5 GHz of spectrum?

    I just need to know before getting a new WiFi router. No point to get a bunch of duel if the laptop cannot receive 5 GHz signals.

    See you soon,.

    Wynn

    Hello

    Thanks for the quick response.

    Check the HP website before posting here and nothing...

    Did as you suggested: device controller speaker and found that the adapter is "Intel Centrino Wireless - N 2230' which after a bit of"Googling"indicates that it is a single tape device you thought it might be a lot of sadness... but good... at least I know now."

    Thanks for the help.

    Wynn

  • Why is there a limited number of changes in the region for the dvd player

    Hello

    I live in the US but have a number of DVD in the United Kingdom - region 2, I occasionally like to play. When you place a region 2 DVD in the tray and launch, I am asked to change region 1 (used 99% of the time) to region 2. BUT there is a message saying that I only have a limited number of swaps in the region (and now I go out)

    Issues related to the:

    1. Why is there a limited number of area swaps?

    2. is there a way to get around this limitation? Or I will have to buy a DVD of the entire drive and watch my DVD region 2 on my TV?

    Thanks Ralph

    Why is there a limit to how many times you can change the DVD region setting?
    http://answers.Yahoo.com/question/index?QID=20090821083051AAAJkOK

    Windows 7 - bypass DVD region
    http://www.SevenForums.com/hardware-devices/17579-DVD-region-bypass.html

  • Error in the configuration of the adapter of the EBS for WebCenter

    Hi all

    When I configure EBS adapter for Web Center, I am getting the error when executing the sql below script AXF_EBS_SOLUTION_DATA.sql, and I check the table AXF_CONFIGS does not exist in the db schema, not sure when this table will create. Please find the below error log details and give me some tip or link to overcome this problem.

    Error log:

    SQL > @AXF_EBS_SOLUTION_DATA.sql

    49.

    v_formId AXF_CONFIGS. FORMID % TYPE;

    *

    ERROR on line 2:

    ORA-06550: line 2, column 12:

    PLS-00201: identifier ' AXF_CONFIGS. FORMID' must be declared

    ORA-06550: line 2, column 12:

    PL/SQL: Ignored Element

    ORA-06550: line 3, column 26:

    PLS-00302: component 'EVENTID' must be declared.

    ORA-06550: line 3, column 13:

    PL/SQL: Ignored Element

    ORA-06550: line 6, column 8:

    PL/SQL: ORA-02289: sequence does not exist

    ORA-06550: line 6, column 1:

    PL/SQL: SQL statement ignored

    ORA-06550: line 7, column 13:

    PL/SQL: ORA-00942: table or view does not exist

    ORA-06550: line 7, column 1:

    PL/SQL: SQL statement ignored

    ORA-06550: line 9, column 8:

    PL/SQL: ORA-02289: sequence does not exist

    ORA-06550: line 9, column 1:

    PL/SQL: SQL statement ignored

    ORA-06550: line 10, column 254:

    PLS-00320: the declaration of the type of the expression is incomplete or

    Malformed

    ORA-06550: line 10, column 254:

    PL/SQL: ORA-00904: "V_FORMID": invalid identifier

    ORA-06550: line 10, column 1:

    PL/SQL: SQL statement ignored

    ORA-06550: line 11, column 13:

    PL/SQL: ORA-00942: table or view does not exist

    ORA-06550: line 11, column 1:

    PL/SQL: SQL statement ignored

    ORA-06550: line 13, column 8:

    PL/SQL: ORA-02289: sequence does not exist

    ORA-06550: line 13, column 1:

    PL/SQL: SQL statement ignored

    ORA-06550: line 14, column 254:

    PLS-00320: the declaration of the type of the expression is incomplete or

    Malformed

    ORA-06550: line 14, column 254:

    PL/SQL: ORA-00904: "V_FORMID": invalid identifier

    ORA-06550: line 14, column 1:

    PL/SQL: SQL statement ignored

    Thanks in advance

    Sanjeev

    Hi all

    We must follow the document below to configure the EBS with WebCenter adapter as a sql script was missing in this document, this table was not created in db and I am faced with the question.

    http://docs.Oracle.com/CD/E21764_01/doc.1111/e17953/c02_ebs_plugin.htm#ADTAD163

  • 2 creative clouds on a single computer! I have the license for Illustrator and Acrobat DC. Customer uses my computer and has a license for Illustrator. How to make this work on computers? I could not use the Acrobat DC.

    Do I need to eliminate one of the creative clouds? How to make this work-2 accounts on one computer?

    Hi Kim,

    Two creative cloud subscriptions registered under 2 different unusable i.d. together on a single computer.

    Must disconnect and connect each time as the creative cloud desktop application, in order to be able to use another subscription.

    Connect and disconnect activate Cloud Creative applications

  • Module adaptation NOR - 6581 FlexRIO - Can one single port of IO have a few lines of channel defined as inputs and some defined as outputs?

    Hello

    I use a 6581 with 7965R FlexRIO FPGA module adaptation module. E/s/Port CLIP Module allows to configure a port as an input or output, but I would first of all a line of a port as an exit channel and the remaining lines of seven channels as inputs, it is possible to do?

    Thank you

    Maurice.

    Hello Maurice.

    The 6581 adaptation module can only change direction based on port (not on a basis of individual line).  This can be seen in the specs here.  There are other modules of digital adapter that support by the steering control of channels such as the NOR 6583.  The NI 6583 35 single ended e/s and the input/output LVDS (or mLVDS).

    Kind regards

  • There was a problem starting msivtt32.dll, the specified module could not be found

    Please what do I do?  When I start my system it comes up and I get this message

    There was a problem starting msivtt32.dll
    the specified module could not be found

    I have not found a single reference to this particular dll and it suggests that it is against malware. Take a look at this Web site as it has got some great instructions on removing malware.
    http://www.selectrealsecurity.com/malware-removal-Guide/

    I hope this helps.

  • I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

    I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

    Have you tried:

    Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • There are so many modules now that do the same thing, how can I say all the features of one add-on compared to others. I know I have way to much the same thing and need to get rid of the undesirables?

    can we get a comparison side by side the Add-ons. How can I say that ive got 2 or even 3 Add-ons that do the same thing? and how can I choose the one that fits my needs, so I can uninstall all others?

    There is no way to automatically compare the modules, you must manually check their characteristics.

  • get the MAX to recognize the SCXI modules

    Hello, try to keep it short, we strive for Labview 5.1 running on the XP machine, until we get new set kit to date in the future (current NT machines fail). I tried NiDAQ 7.1 8.1 drivers with a PCI-MIO-16-4th card in a Dell optiplex 755, and the current sticking point is to configure the system via MAX to specify the type of chassis and modules. Modules are not found automatically, and entered manually the results into the slots being declared empty, on a test of the chassis (chassis SCXI-1001). SCXI modules we are SCXI-1100, SCXI-1162HV, SCXI-1124 2 x and 2 x SCXI-1160. What should I do to make this work? Different driver? I'm not at all familiar with the inner workings of Labview!  Thank you.

    Rob,

    Thanks for the reply. The problem was more the cable SCSI detaches from the end of SCXI chassis (these connections seem very inclined to come drifting). The modules then self populated, and the system works now. The system worked very well for ten years, but the old Compaq PC fail now and we have only a few replacement Dell, but of course they come with Windows XP, while the ran Compaqs WinNT, it has so been interesting trying to get Labview 5.1 running on the new boxes with the old cards DAQ until we get funding for new cards / Labview 2010 / Teststand. Problem solved for now!

  • Replacement of an SCXI module - 1102C

    I have a module SCXI - 1102C which is suspicious (get low level square wave ' noise' specific intervals 1 second on several channels) and I would like to replace it as part of troubleshooting. It is mounted in a PXI-1052 chassis. I am relatively new at this stuff. Is is possible to simply power down the chassis and replace the card, or do I need to remove the card MAX, turn it off, replace the card, power to the top and re - install the device and all instruments in MAX? Whatever it is, I'll need to recalibrate instruments all affected (we do Tip 2 calibrations), but the old method would be much easier. Thanks for any help.

    Habaneroguy,
    Yes, the chassis power off and replace the card works perfectly.  You should not change the settings for other devices in MAX.

    -Christina

  • How to remotely manage the tasks of acquiring data and SCXI modules?

    Hi, I have a system consists of a PCI4070, a PCI6024E, several SCXI1102 and a SCXI1130. I wonder if I can remotely view/create data acquisition tasks and configure SCXI modules. My PC and PC host of these devices are in the same LAN, I tried to create new ones in the remote systems to MAX, but he found no material. What should I do? Thank you very much.

    Please note:

    A remote system (in MAX) refers to a real-time target that can be managed or configured on the network, while a network device does not run a real-time operating system. Remote systems are not the same as network devices. A network device is a device that is accessible via an Ethernet or wireless. These devices can be accessed by multiple computers and not to run a real-time operating system.

    For your application, you can consider using VI server to run a VI to the driver for your devices.

    http://digital.NI.com/public.nsf/allkb/0232C618DAA70F6C8625736200452C1D

Maybe you are looking for