Example of lifestyle driven by GPS

Similar Questions

• Is it possible to pair a third-party GPS for use with Apple Watch?

  I would use one GPS other than in my iPhone connected to my watch.  For example, I would use a GPS watch instead of my iphone running the runtime (easier to transport).  Can I pair it to my Apple Watch something?  I tried several times the calibration routine on my watch and it is simply not enough precise for me without a GPS and I do not carry my big 6 + when I run.  I have an old Garmin watch... running would be great match its function GPS with the Apple Watch...

  Aside from the fact that Garmin is known for plays not well with other devices, including older devices Garmin who were ANT only, no, this is not currently an option with the Apple Watch.

• Venue 8 GPS Pro?

  I see that the meeting place 8 Pro has an accelerometer, but no GPS is mentioned.  Even small smart phones have GPS.  Did the material present in the device, but not used by Dell?  I suspect that the material is there, as with HDMI, where the capacity is there at the hardware level, but Dell used it to this unit.  Bad luck.

  There is no hardware present GPS, in and of itself, but there are what we call 'aGPS."the IP of your computer address aGPS uses closer to where you are, but only with a precision of about two miles. Your best bet is to get a real GPS receiver using Bluetooth (for example, GlobalSat BT - 368i Bluetooth GPS receiver) or USB (for example, GlobalSat ND-100 USB GPS receiver).

• Supports the 8830 World Edition GPS functions?

  Hi guys.

  I am facing some problem GPS. I need to test my app on Simulator for the BB 8830 World edition.

  But this Simulator supports the GPS (using JDE 4.5.0). I read the topic on smart phones with GPS from herecapabilities.

  The reason for writing this post is: my friend's 8830 world edition and it works at my request.

  Then my application detects "no GPS device.

  To detect the GPS, using following code:

  If (LocationProvider.GetInstance (null) == null) {}

  This device has no GPS

  } else {}

  GPS is ok.

  }

  Is it really unit no GPS?

  What is the best way to detect the GPS features?

  Please share with me any source code of example concerning the detection of GPS capabilities.

  Thank you guys.

  The 8830 supports only "assisted" mode on the Verizon network, which you can't access without EDP information.

  See your other thread on the subject, where I answered your question with references to the relevant KB articles.

• LocationListener Vs getLocation GPS coordinates?

  Hello

  Just a quick question.

  I've read several times that the frequent difficulty, to use a LocationListener instead of lp.getLocation (repeated).

  What can be considered "frequent"?

  All the examples I've seen get GPS coordinates every 5 or 10 seconds.

  On my particular application, I do a lp.getLocation () every 15 minutes... but I want to change that to 5 or 10 minutes.

  I have two solutions work, I just would like to know which should I use for a fix every 5 or 10 minutes?  One who takes fewer resources battery and device?

  Thank you!

  I think that locationprovider would be nice in this case.

• How can I disable People and Places in Photos.app@iOS10?

  I frequently get photos under NDA contract, not allowing any electronic assessment content photo due to the protection of data. Thus our admin has stopped any update of iOS10, because the new Photos.app of iOS10 seems to have no switch to disable extraction faces to the 'People' file or folder locations "places".

  How can I disable these processes demons or can be sure no processing happens on photos?

  Thanks for your help maintain our aircraft delivered by Apple and avoid spending somewhere else!

  Analysis of face detection is automatic and cannot be disabled.

  http://help.Apple.com/iPhone/10/#/iph9c7ee918c

  Photos scans your library of photos for the faces of the people and adds faces more frequently found in the album of the people. You can assign names to the discoveries of Photos of people, add people appear less frequently, people mark as Favorites and discovers memories that contain specific people. The more photos you have, more the first scan takes.

  You can only hide the detected people and refrain from naming people.

  The album places creates collections of photos and videos based on the place where they were taken.

  This example uses the photos embedded GPS tags. You would have to strip the EXIF in the photos tbefore tags you import them to avoid this problem.

• Can I load my Atrix 4 G with the SPN5334A?

  Thus, the charger supplied with my phone is the FMP5504A / SPN5504A. On the other hand is listed:

  SPN5504A power supply Motorola

  Model: FMP5504A

  Input: 100-240V ~ 50/60 Hz 0. 2A

  Output: 5.1V ~ 850mA

  With this in mind, can I use my old Motorola bluetooh charger to charge my phone?

  Power supply Motorola SPN5334A

  Model: FMP5334A

  Input: 100-240V ~ 50/60 Hz 0.15 a

  Output: 5.0V ~ 550mA

  You can use it, but with two oppositions:

  1. It will load more slowly (because it is vs 850ma 550ma)
  2. Associated with the first, if you turn on a bunch of stuff hungry power (for example google maps with active GPS + wifi + music or youtube etc) it actually may not be able to charge the phone.

• myRIO time restores default of the ignition system after reboot

  Hello guys,.

  I have the following problem.
  I measure the tension on each analogue input. The measurement starts after starting the appliance myRIO, while time system of myRIO device resets the time default system. But the measures are useless without a good timestomp, containing real time (day, month, yearh, hour, minutes, seconds).
  Is there a possibility for the device myRIO start with real time, or that unit myRIO has time while turned off. (perhaps someone knows the external devices which can be connected to the USB myRIO to get real time)

  Greetings from the Germany

  Dimasaur

  The myRIO has not shipped for the real time clock battery, so the time will be reset with each power on.

  You can set the date and time on the myRIO using screws on the target System Configuration, so all you need to do is to find somewhere that timestamp and assign once myRIO Boote.

  Here are a few options:

  -If you have a HOST VI connected, send the timestamp for the myRIO from your PC

  -External battery series/I2C/SPI supported RTC chip/module that you can connect to the myRIO. There is an example here.

  -A GPS module provides a very accurate timestamp as part of its NMEA data - could you one until the myRIO e.g. via Serial hook

  -The information of the network timestamp (for example a time server SNTP or by making an HTTP request - the timestamp is usually returned in the header information by the server or you might find a web service that provides information 'current time')

• binary data from GPS VI-example RF recording / reading with NI USRP

  Hello

  In the demo video (http://www.ni.com/white-paper/13881/en) a ublox was used to record the GPS signal while driving. How is it possible to record with you - Center in a binary data format which is usable within LabView for the reading of the GPS signal? Ublox uses the *.ubx data format, is there a converter?

  Hello YYYs,

  The file was generated not by uBlox but by recording and playback VI.  An active GPS antenna, fueled by some amplifiers and mini-circuits was related to the USRP and the program created LabVIEW file (USRP being used as a receiver)

  Later the USRP is reading the file (generation) and the Ublox GPS receiver is to be fooled into thinking that its location is currently somewhere else.

• App for Apple Watch series 2 allow the use of heart rate, gps, and manual splits?

  I run about 60 miles per week and I plan to change my Garmin Forerunner 620 for a series 2. However, it would be totally useless to me if the watch does not intermediaries, as many of my workouts are pretty accurate. So, is it possible for me to intermediaries on the watch, and when looking at the splits also see the GPS info and heart rate for the said stock split?

  Hello

  To mark a segment (for example one lap) during running exercise using integrated workout app, you can double-click the screen. The display briefly shows the stats for this segment. Segments can be examined after training through the activity on the matched iPhone application:

  • Work with your Apple Watch - Apple Support
  • https://help.Apple.com/watch/#/apd36e57e00c

  You can see that an application of third party best suited to your needs.

  To learn about the characteristics of third-party applications, I suggest you consult the descriptions of app developers and their support resources. For example:

  • Runmeter:
    • App: https://itunes.apple.com/us/app/runmeter-gps-running-cycling/id326498704?mt=8
    • Support: https://abvio.com/applewatch/
  • My race card:
    • App: https://itunes.apple.com/us/app/map-my-run-gps-running-workout/id291890420?mt=8
    • Support: http://www.mapmyrun.com/support
  • Strava:
    • App: https://itunes.apple.com/us/app/strava-running-cycling-gps/id426826309?mt=8
    • Support: https://support.strava.com/hc/en-us
  • Nike + running Club:
    • App: https://itunes.apple.com/us/app/nike+-run-club/id387771637?mt=8
    • Support: https://secure-nikeplus.nike.com/plus/support

  If you don't find the specific information you're looking for, you can ask the developer directly. This is usually possible through their support resources (you may need to create a free account in order to be able to connect). They may also be open to feature requests.

• you're wondering what that the autonomy of series Watch 2 using GPS?

  Plans to buy the new series 2 shows that there are now GPS. I wonder what will be the battery life while using the GPS when I am running?

  Hello

  Battery life varies depending on use and other factors.

  During tests, for example, Apple has reached 18 hours of battery life with the next use: 90 time checks, 90 notifications, 45 minutes of usage of the app and a workout of 30 minutes with Apple Watch Bluetooth music playback.

  Y using the application of the training session with and without using the built-in - GPS function examples are available here:

  • http://www.Apple.com/watch/battery.html

• Apple Watch 2 GPS series

  GPS can be used for other features such as instructions for the cards, or is this just the year (followed by running routes, etc.)?  For example, I can leave the House without my iPhone and navigate somewhere using the built-in GPS?  Thank you!

  I'm sure that built-in GPS THAT will work for the cards, but also exercise apps - I would be very surprised if it isn't. Having said that I can't see these things mentioned in the User Guide to look at when to talk GPS, it does only however seem to mention the use of the watch without your iPhone for this type of training activities.

  Steve

• GPS, Wifi and Bluetooth problems

  So I have an iPhone 6 running on IOS 9.3.4 and have had problems with the GPS and the strength of wifi connectivity and bluetooth for a while now.

  First of all, the GPS.  It does not work.  When I run the maps or google maps on my device and the input an address the app can give me a written plan, location, but will not show me on a map.  He'll start road to everywhere where I go and tell me to start position, for example, to the North on the road on that I am, but the arrow does not follow me and tell me when the turn or where I am.  Occasionally, he has a message of guidance down with a spinning wheel and then, after a few seconds, disappears.  I tried to reboot my device several times, I have reset the network setting, I reset all of the settings, I backed up my phone, reset it and recovered save him.  Nothing has worked.  I was at my local verizon store and received a 'new' (its definitely refurbished) phone and the problem persists on the new phone.  I reset the phone to factory setting without content, set up as a new phone and tried the cards again, thinking it might be a problem with the back to the top.  It still does not work.  I'm perplexed right now and do not know what to do/try.

  Second, wifi and bluetooth connectivity is terrible.  I can only receive a wireless signal so that in very close proximity with the router.  I tried to different houses/companies and it is the same question.  However, bluetooth is just as bad.  I use headphones wireless, and go to the gym/go for the route with them.  I used to be able to walk around the gym without my phone and have connected the headphones, but now I can't have my phone 2 feet of the appliance without the music being agitated (bad connection).  I'm really irritated that I cannot understand this point and that he can't seem to find a fixed solution online.

  If you have just updated to iOS 9.3.4, which I didn't even know still shone, so maybe it's a bug that comes with the update. However, your problems seem to follow a trend, you can not far from a source of connection and now a signal. It is perhaps because the necessary components for the Bluetooth, GPS and WiFi signal are damaged or defective. Have you dropped or spilled liquid on your iPhone recently?

• How to save pictures of Photos in the form of files without losing the GPS data?

  Hello!

  Can someone advice me in the following cases:

  I want to erase my Photos from iPhone and iMac. Before that, I wish I had pictures of my library of Photos saved as a regular directory with files. As Windows does, for example.

  Can someone tell me how to save all Photos in the form of files without losing the GPS data? Thank you!

  Just export them (File menu) in unmodified versions.

• Human resources and GPS info collected

  Hello

  Is it me, or there is no fitness application that can capture HR and GPS to be collected and reviewed online? I understand that native watch OS 2.0 applications now have the ability to read the data of the health package, including human resources. I would like to find an app that runs on Watch OS and its application of "Companion" of iOS, which will collect the training info (if all goes well at a minimum, HR, GPS and derived information such as speed and distance) and send it online for various activities such as hiking, running, cycling. I used to love card my blah... but since UA * bough all of them, it seems that they block the development of features that will read the data such as the High Representative, in favor of their own overpriced accessories. I sold my other devices because Apple Watch had everything I wanted. Why is there not an app (free or paid) that can do this simple task?

  I snowshoe, ski, bike and swim primarily, is - it really too much to ask? If there is a gem that I found no, or a method that would allow me to perceive this, I'll be most grateful.

  Export GPS tracks in a standard format would be a big plus for me.

  See you soon,.

  < personal information under the direction of the host >

  Hello

  You can find Strava (a third-party application), for example, interest.

  Strava includes support for capturing GPS data (via the iPhone paired), heart rate (via Apple Watch) and export activities in the form of GPX and TCX files.

  More information:

  App: https://itunes.apple.com/us/app/strava-running-cycling-gps/id426826309?mt=8

  Data export: https://support.strava.com/hc/en-us/articles/216918437-Exporting-your-Data-and-B joke-export