excel macro

Similar Questions

• order excel macros running

  I got Labview execution of macros very well.  I added a new structure of macro and where to add this feature, now it gives me an error on all macros.  ' cannot run the macro ","is not available", cannot be activated" is the jist of the error.  In addition, the labels for the structure of the case are now red.  I checked the spelling and order. THA tonly thing I can think is that I added a case before I added the enumerated constant.  I added the jurisprudence and have never had a problem, macros work when run manually, they are all in personal.xlsm!

  so, I thought about it.  I thought it was a problem of update of LabView, as these events have been cleared.  Anyway, he had to do with the VBA quirks.  When you import a .bas file, the name is listed on the LH is framed:

  put_title_here

  and the first line of code is

  Void put_title_here
  

  If you don't catch it on the VBA page.  When you goto the 'View' tab in excel and click the macro button, you will notice that the name is double.

  Personal.xlsm! put_title_here.put_title_here

  If the macro in the module 1 is on this sidebar LH name is normally listed when you open Excel. Sidenote, macros stored in this Module 1, enter any other time, the name double or sometimes triple as listed above.  It can get a bit ridiculous if you export versions and re-import for editing.  the way VBA saves and exports/imports is somewhat different from most other programs.  as a return to the 1990s.  in any case, the lesson learned.
  

• Cannot open an Excel macros.

  Original title: opening Excel Doc.

  I try to open an Excel doc. I offer myself to enable or disable macros. I tried both and for each, I have been informed that there are errors in some modules, and when you ask the system to continue opening the document, it finally very briefly (1 second) opens and then closes. Others seem to be able to open the doc. I use AVG Internet Security.

  Ask in the forum Excel for your version of Excel (select the drop-down 'Version of Office' version).

  Include your version of Office in the body of your question, but also the full text of the error messages without paraphrase.

  Probably, you should also include the version of Windows you have, including the service pack (right click on desktop and select properties for info).

• How to control NI USB-6509 with Micrsoft Excel Macro?

  Hello

  I have recently brought NI USB-6509 (96 digital i/o channels) and tested ok with Labview. But I wanted to detect and control the same device in microsoft excel. Can anyone suggest me some solutions to work on excel with this device?

  Look here and here. For other examples, do a search for "DAQmx VBA".

• Add new macro in excel

  Hi all

  I write my data with activeX in excel. At the end of the acquisition, in that I want to add a new macro excel and begin to make a graph.

  How can I send Excel macro full?

  I already know that it is possible to run an existing macro in excel and likely with Arg (1to30) but it is not enough for me.

  I have more simple for me to send a complete macro.

  And I don't have desktop tools...

  Thank you

  
  

• Run a macro in Excel to an open workbook?

  Hi all

  I am relatively new to View Lab and Lab VIEW forums.  I searched the forums and the knowledge base with results which doesn't really answer my question.  I download each LV/Excel example and llb I find... dug through them and tried to familiarize myself with the LV/Excel relationship with marginal results.

  Basically, what I'm trying to do is to run an Excel macro in a workbook that is already open and run all of the examples I found... force you to open the Excel workbook, which is problematic if the workbook is already open.  I have a VI that you open my workbook and run the macro I specified, but when I try to remove the "open" part it blows upward.

  I pulled the "Excel Macro Example.VI" finder OR example, who once again does not work if the workbook is already open.  It seems to me that the main problem is that there is not another option another "Automation Open.VI" I do not have the reports of the Toolkit, so maybe it's the question... do not know since I do not know what it contains.

  I have attached one who opens my sheet and runs the macro (excel_run_macro.vi).  I would be very grateful if someone who understands the links between the LV and Excel take a look and possibly direct me in the general direction of the macro execution without trying to open Excel again.

  Thank you!

  Chad

  the problem is that you keep trying to open the workbook when it is already open. in the attached code, you will find that I am looking to see if the workbook is open. If it is then I put it is the active workbook and run the macro. If it isn't then I open and then run the macro.

  Try the code below and see if it works for you. You will hace to ensure that all references are closed and comparison feature works for you. I just hacked this together as a proof of concept for you.

• It is possible to automate Firefox uses Excel VBA

  We did Automating Internet explorer by using VBA, now we have some projects that supports and do the work on Mozilla only... If need to automate applications in firefox using VBA excel macros.

  I heard it is possible adding and some dll regestring. So could you please help me on this with precision.

  Thank you and best regards,
  Nani.

  This forum is for the support to the users , your question is beyond the scope of assistance to users.

  Try searching for the Mozilla Developer Network site on your query.
  https://developer.Mozilla.org/en-us/
  
  Here is an article on the generation of a component DLL.
  
  https://developer.Mozilla.org/en-us/docs/Building_a_component_DLL

• How to force Excel to open and update links

  I have a .xlsm for Excel Macro file I send data to and receive results based on that data are calculated. Some of these calculations are through a .xla link. NORMALLY when a man opens the file, the linkis opened and updated and everyone can go about their business.

  I found myself explicitly link opening with another open statement of workbook, but that's not fair right way. What happens if the .xla changes its name, or is moved? There must be a better way. Excel macro recording even managed to give me the explicit path and not an average programmically to open it as Workbook.OpenMyStupidLinksYouFool. Ugh.

  For reference, I tried to add parameters to the command open and compiles incorrect Diadem and he said I can't use parentheses. There are already some parenteses. huh?

  Open method of Excel:

  https://msdn.Microsoft.com/en-us/library/Office/bb179167 (v = office. 12) .aspx

  Safe:

  Excel.Workbooks.Open (sPathDocuments & "" & DiademExcelWorkbook)

  Error:

  Excel.Workbooks.Open (sPathDocuments & "" & DiademExcelWorkbook, 3)

  Hi sg.

  The specific error that you got has nothing to do with DIAdem or Excel. If you want to call a function in a VBScript script that has several parameters, and if you use parentheses in the call syntax, then the prefix 'Call' is necessary.

  Call Excel.Workbooks.Open (sPathDocuments & DiademExcelWorkbook, 3)

  I'm not sure what you were up to with the & "" & construction, so I simplified it is above.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Remove the line from the Excel report when generating reports

  Hi all

  I try to delete whole lines of the report excel during the generation of the report in excel, but I'm not able to do this. Here I am attaching an excel template, in that I want to delete line no 3 to 5 How can I do this. I'm using LabVIEW 8.6 Report Generation Toolkit for Microsoft Office 1.1.3

  Thanks and greetings...

  If there is no function to generate report for simple operations like this, then use the palette of VBA macros to run this code snippet:

  'remove all lines between two rows inclusive '.
  Void DeleteRows (intTopRow As String, intLastRow As Integer)
  Range (cells (intTopRow, 1), (intLastRow, 1)). EntireRow.Delete xlShiftUp
  End Sub

  Import Excel module allows to load the .bas file then run Excel Macro with parameters 3 and 5.  Check your security settings if you get an error in the macro.

• Can Excel launch an executable of Labview?

  Hi all:

  Can Excel launch an executable of Labview?

  I would like to open an Excel file, fill data in Sheet1

  and then press a button on the worksheet "Sheet1" Excel.

  By pressing this button, it will start to run an executable of Labview.

  Thank you all,.

  \\carlos in Sunnyvale, CA

  An executable of LabVIEW is an executable file like any other executable file. As long as the LabVIEW run-time engine is installed, you can call in an Excel macro using the Shell() command as calling Shell (executable).

  (EDIT: clicked Post until I had finished it)

  OR, you try to call using ActiveX with LabVIEW as an ActiveX Server?

• How can I insert an infinity symbol or resistance by labview in excel file

  Hello. I need insert infinite synbol in report excel file. How can I make that easly, maybe you have a ready function for this target.

  If you don't want to get into the EXCEL class & its node propert, average the simplest is to SAVE the macro to insert EXCEL result.

  The copy of the generated VB code & use it in LABVIEW using EXCEL MACRO screws.

• macros personal

  Hey,.

  I would like to open a PERSONAL.xlsb macro to manipulate data to a TDMS file is imported into Excel (via import add-in for TDMS files). Everything must go automatically, but the problem with import add-in for excellent TDMS files is that it always opens a new excel worksheet.

  This is why I made a macro in a personal workspace, this file is located in: C:\Users\User_name\AppData\Roaming\Microsoft\Excel\XLSTART

  These macro can be opened in each worksheet, but I have difficulties to open this personal kind of macros, I always get an error saying that the macro is not available or it is turned off. I changed the options in Excel macros security to ' all running macros ' and yet he won't open it.

  I'm using Labview 2010 and Excel 2010, the files are in the attachment, if you want to try the programe the path must be changed.

  Did someone knows a solution?

  Sorry about that!

  It is better now?

  Warning: The example Code is provided as is. It has not been tested or validated as a product for use in a deployed application or system, or for use in dangerous environments. You assume all risk for use of the Code and the use of the Code is subject to the license terms of Sample Code which can be found at:http://ni.com/samplecodelicense

• Create the cell borders in Excel using ActiveX

  Hi all

  Thank you to everyone who has helped me in my adventures of ActiveX.

  My current question is, how to create LabVIEW equivalent to these lines VB code:

  Range ("A1: B2"). Select
  Selection.Borders (xlDiagonalDown). LineStyle = xlNone
  Selection.Borders (xlDiagonalUp). LineStyle = xlNone
  With Selection.Borders (xlEdgeLeft)
  . LineStyle = xlContinuous
  . ColorIndex = 0
  . TintAndShade = 0
  . Weight = xlThin
  Ends with

  That's what I have so far:

  

  Any help would be greatly appreciated.

  Sincerely,

  FB

  You got most of the way. Keep in mind the Excel macro recorder is VERY inefficient if you can complete get rid of select. In addition, the VBE (visual basic editor) turn on Excel the 'window' (Ctrl + G). In this window, you can type something like this:

  ? xlNone

  ? xlEdgeLeft

  to return the numeric value associated with the enum value. In addition, by pressing F2 in the VBE will bring up the object browser that you will find these object and find digital definition (immediate window tends to be faster )

  Try the attached code and let us know if it works.

• How to use Labview to send commands to Excel on data analysis

  Hello, here's my situation:

  I have a Labview VI that reads data from various sensors and uses the report generation tool to send all the data values to Excel. Because each race is ~ 8-10 hours long and there is tons of data, I'm not worth it to store them in a table in my VI.

  However, in my Excel report I would like to include some statistics, like the initial report, max and min values of all the data from these points. Should what kind of command I send my VI to get Excel to do this? Or would it be easier to do within Labview instead?

  Thanks to anyone who can give some advice!

  Hello, Kalyie!

  Puneet.Kapoor is indeed correct, you can create an Excel macro and call from LabVIEW. An example of this in LabVIEW under help > find examples. When searching for "Excel", you will find 'Excel Macro example.' It would be more useful for the automation of your functions, or if you try to do more complex operations on your data in Excel (min and max are simple relativelty, however).

  As we have also seen, it may be easier to work with the data once it is in excel, using the '(Max) =' and the functions '= Min ()' - the choice is yours!

• conversion of the error of date / time when using easy excel reports

  I export a 2D array to an excel file using Excel reports easy vi. I have no problem with that. My data has a number of areas with different formats (text and date/time). My problem is the following:

  * some (in other words, not all data is in the same worksheet) the veiled values of date/time to mm/dd/yyyy format whereas they should be in mm/dd/yyyy (is the excel format it is y in!). Essentially, I have 30/09/2008 (September 30, 2008) in a cell. After ticks on Oct. 1, it will display the date as, 01/10/2008. Excel thinks that this date is in the format dd/mm/yyyy.

  This is a known error in earlier versions of Excel (2002), in particular when you convert a .csv, .xls file. The solution, it was not to add "Local: = True ' at the end of the vba command string (see here: MS Knowledge Base). Here, in LabView I'm not sure how to proceed.

  I tried to change the format of the column in question to the 'text' by calling an Excel Macro in LabView, but do you think I can find the vba command to do? No, not so much.

  LabView saves the Excel file in 97-2003 format (I use MSOffice 2007) and I wonder if the version they are using does not consider the time correction, as described in the knowledge base (or if it applies).

  Any suggestions, I'd love to hear from you.

  Kind regards

  David.

  Hi LaRisa,.

  I was able to find the cell Format Excel set vi and successfully change the format of the value of the cell. It wasn't until I had found the vi that I realized that I've been down this road before. Change the format after the table has been created does not change values dd and mm switching that has already occurred. However, if I did before I "created the table" (or vi Excel table) and set the format to be '@' then it displays the string like 'Text' in the Excel file. That's nice. I can control what cell, row, or column to format now. If I want to be in a date format then I must apply the Format of cell vi after the easy Excel table vi.

  It sounds like a stupid race around me...