Exception BAM-00404, authentication failed. The user is marked inactive

Similar Questions

• Authentication Failed: the Proxy to fail

  What's the matter, authentication fails and the message is this:

  Authentication Failed: the Proxy to fail

  Thank you

  Go to network settings > under 'Groups of network devices' click "(non attribué)" "

  Under servers "(Not Assigned) AAA", note the name of the IP address of your machine, which can be confirmed from the DOS command prompt "

  using the command "ipconfig/all".

  Then, return to the Network Configuration > under "Distribution of Proxy table", click on "(default)".

  And make sure you name server entry AAA for your machine is in the column 'Forward To '. If it isn't, then move your entry of the column machines and ensure that all other entry is under "AAA servers. Press 'submit + Restart.

  Finally, try authenticate a client bit against this ACS server.

  Kind regards

  Prem

• ACS Auth: Use of group data for the authentication of the user-> security problem?

  IM only using a VPN-installation (router, ACS, Cisco VPN Client) and I noticed that the name of the Group and the Group decrypted password can also be used in the second step of the authentication (the extent of authentication or authentication of users), which is a big security concern. What wrong with my setup.

  For the test I have set up a VPN configuration as described in cisco documents. Here, it also works. The identification information of the Working Group in the authentication of the user, too, which is quite logical, because the group credentials are also a user in the database of GBA. Of course, this user can be authenticated in the user authentication process.

  Who is wrong? How other admins to solve this problem? Am I wrong in my approach?

  Thank you!

  Yes, permission will have password for "cisco", at least for isakmp and pki. The group will send its name and password Cisco to receive the av pairs (ASA has a function to create a "good word of different past" but he's not here on IOS, AFAIR)

  It is a restriction known - you should not use the same server for authentication and authorization, with IOS and ASA.

  Did you give this property (either / or):

  -local isakmp authorization

  -l' authentication certificate (Group)

  -sharing features for authentication and authorization between servers.

  I don't think we can do much wise configuration to prohibit this behavior.

  Edit: spelling correction.

• How to get the authentication of the user for the link of the Questionnaire Survey Builder?

  How to get the authentication of the user for the link of the Questionnaire Survey Builder?

  Page 100

  The content can be dynamic and the link is unique to the participant, but they all go to Page 100, which has an alias of Q. The link is unique because of the value of the request passed not because of the page.

  Thank you

  -Jorge

• Authentication failed for users of the AD and work for users of OID using OAM 11 G

  Hi all
  
  
  I have deployed an Application in OSH where the doors of the web are installed. In OAM 11 G, I created the Userid as OVD store and created policies for that. and I was able to protect the application.
  
  But authentication works very well for users of the OID. But does not not for users of the AD (saying ID user and password are incorrect)
  
  Part of the OID, AD with TPM. but the AD authentication does not work.
  
  
  could someone help me with this.
  
  
  
  Thank you
  Kiran

  Hi Kiran,

  Check that the name attribute of such user as defined in the Data Source is mapped in TPM attribute AD that you plan to hold the user name. Perhaps, it is use usrprincipalname instead of the samaccountname, or something like that? The oam_server1 - diagnostic.log, or newspapers OVD, may give more clues as to which is the problem.

  Kind regards
  Colin

• User profile Service failed: the user profile Service service has no logon. User profile cannot be loaded

  I have another computer.   I turned it on and when I typed my windows password, I received the following message: the user profile service service has no logon.  User profile cannot be loaded. Service user profile Service has no logon.  User profile cannot be loaded.  I use Windows 7 Professional.  I don't have a password reset disk.  How can I get?

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Group Policy Client failed, the user profile Service failed

  I just restored to an earlier point because of the downloads to my son. After a few days, The Group Policy Client failed when trying to open a session administrator and the user profile Service failed under a different name. I can't do anything because this screen is the key for any software, including the internet. I went into the BIOS but it looks like no help. How can I get around the display of password or reset the computer.

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• How to intercept the sockettimeout exception message and display in the user interface of the view?

  Hi my jdev - 11.1.1.7 version

  I ask a socket connection in my AM and I want to catch the exception of the sockettimeout of t and display the error message in the user interface of the view layer.

  I use customException class that extends DCErrorHandlerImpl, but if we use try catch, then exceptions doesnot reach customclass.

  How to catch exceptions and return to view the layer if we use the operation binding. ?

  Because you call the operation via the link layer, which is perfectly fine, you do not get an exception at all. Exceptions thrown in methods called via the link layer are captured by the framework and transferred to the appellant in the operation binding.

  For that, you get the list of errors after the call returns and add them as messages of faces

  execute the method

  Method.Execute ();

  List errors = method.getErrors ();

  If (! errors.isEmpty ()) {}

  handle errors errors here is a list of exceptions!

  We only get the first

  E receive = errors.get (0);

  FacesMessage msg = new FacesMessage (FacesMessage.SEVERITY_ERROR, e.getMessage (), "");

  FacesContext.getCurrentInstance () .addMessage (null, msg);

  }

  no error return to normal work

  Timo

• Authentication of the user in Disqualification

  Hi gurus,

  A quick question on authentication via Disqualification.

  We will have a Java program that calls a web service Disqualification, but before calling the web service of the Disqualification, Java program will preform on the role of user authentication (using OAM, or UPT). Now, is there a way to Disqualification to authenticate once again based on the role of the users/continue to call web services. If authentication can not happen to the Disqualification, is he a way through weblogic server on the side of the Disqualification?

  
  

  The goal here is to have a graphical interface for the users of the application (for example), click a button and call a web service Disqualification.

  
  

  Note: I don't know of users accessing Launchpad of the Disqualification.
  

  
  

  Thanks in advance,

  
  

  Disqualification in WebLogic webservices are secure by using GOSA strategies defined in the EM (Fusion Middleware Control) area.

  Authentication methods include basic HTTP or WSS security simple elements in the SOAP header.

  If your client code can generate one of these methods support then the authentication of the web service must be successful.  I don't believe not that style OAM authentication will work here as it is about browser/cookie based.

  Please come back with more detailed questions if necessary.

  Richard

• Clear HOWTO #{securityContext.authenticated} when the user opens a new tab in the browser

  Hello world

  I use a template for my ADF Application, so I make the application menu depending on whether the user is authenticated or not, if the menu is not displayed in the login page and use a common template for all my pages:

  rendered = "#{SecurityContext.Authenticated} '"

  My problem is that the value remains, so I would like to know what is best practice to turn it off when the user opens a new tab, or maybe my approach is quite wrong?

  Thanks experts!

  Jose.

  Hello

  I changed the method, so I give the menu according to a 'login' property in a managed bean:

  With the corresponding accessor:

  public boolean isLoginPage() {}

  Var currentPage = FacesContext.getCurrentInstance () .getViewRoot () .getViewId ();

  If (currentPage.contains ("login")) {}

  return (true);

  } else {}

  Return (false) End Function

  }

  }

  Thanks for your help!

  Jose.

• Authentication of the user of the OS does not seem to work

  Your help is much appreciated.

  This is the setting

  Version of the product	11.2.0.3
  Operating system	Linux x 86-64
  OS version	Red Hat Enterprise 6

  SQL> show parameter os 
  
  NAME TYPE VALUE 
  ------------------------------------ ----------- ------------------------------ 
  db_lost_write_protect string NONE 
  diagnostic_dest string /apps/oracle 
  optimizer_index_cost_adj integer 100 
  os_authent_prefix string OSUSER 
  os_roles boolean FALSE 
  remote_os_authent boolean TRUE 
  remote_os_roles boolean FALSE 
  timed_os_statistics integer 0 
  
  
  SQL> select username, password from dba_users where username like 'OSU%'; 
  
  
  USERNAME PASSWORD 
  ------------------------------ ------------------------------ 
  OSUSERoracle EXTERNAL 
  
  
  SQL> select privilege from dba_sys_privs where grantee='OSUSERoracle' order by 1; 
  
  
  PRIVILEGE 
  ---------------------------------------- 
  CREATE SESSION 
  UNLIMITED TABLESPACE 
  
  
  
  
  SQL> select osuser from v$session where username = 'SYS'; 
  
  
  OSUSER 
  ------------------------------ 
  oracle 
  
  
  SQL> conn / 
  ERROR: 
  ORA-01017: invalid username/password; logon denied 
  
  
  
  
  Warning: You are no longer connected to ORACLE
  

  .

  Oracle@seclindbs ~ $ sqlplus / as sysdba

  SQL * more: version 11.2.0.1.0 Production on Wed Apr 1 11:33:34 2015

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  With OLAP, Data Mining and Real Application Testing options

  SQL > create user ' Oracle$ OPS ' identified externally.

  Created by the user.

  SQL > grant create session of "Oracle of the OPS$";

  Grant succeeded.

  SQL > exit

  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  With OLAP, Data Mining and Real Application Testing options

  Oracle@seclindbs ~ $ sqlplus /.

  SQL * more: version 11.2.0.1.0 Production on Wed Apr 1 11:34:01, 2015

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  ERROR:

  ORA-01017: name of user and password invalid. connection refused

  Enter the user name:

  ERROR:

  ORA-01017: name of user and password invalid. connection refused

  Enter the user name:

  ERROR:

  ORA-01017: name of user and password invalid. connection refused

  SP2-0157: unable to connect to ORACLE after 3 attempts, leaving SQL * more

  Oracle@seclindbs ~ $

  Oracle@seclindbs ~ $ sqlplus / as sysdba

  SQL * more: version 11.2.0.1.0 Production on Wed Apr 1 11:34:05 2015

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  With OLAP, Data Mining and Real Application Testing options

  SQL > drop user ' Oracle of the OPS$ ";

  Deleted user.

  SQL > create user ' OPS$ ORACLE "identified externally.

  Created by the user.

  SQL > grant create session for ' OPS$ ORACLE. "

  Grant succeeded.

  SQL > exit

  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  With OLAP, Data Mining and Real Application Testing options

  Oracle@seclindbs ~ $ sqlplus /.

  SQL * more: version 11.2.0.1.0 Production on Wed Apr 1 11:34:31 2015

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  With OLAP, Data Mining and Real Application Testing options

  SQL > show user

  The USER is ' OPS$ ORACLE. "

  We need to create the user as: "OPS$ ORACLE" when top.

• Failed the user connection cannot load profile.

  Very good as well. It is a sort of story, but I'll try to be as detailed as possible. There are 2 parts of the story.

  First of all:
  So I'm going to turn on my computer today and it loads, it took very long however. Once it starts it showed orange desktop compaq computer which is the temporary profile I guess and it showed a message saying it was the temporary file and contact admin etc.. I am the administrator who doesn't really work. But anyway, if I go to some forum I found on google for help [I know, not the smartest idea] but I was desperate, I have a project due tomarrow I have to do if I need this problem. So I'm looking and looking and I found what seemed to be a good solution. He said go into regeit and go through a group of tabs and change some things to .bk clear some things and change things to 0. So I did what he said and restarted...

  Second part:

  Once I restarted. He wouldn't let me even in my profile. It just took me to my icon and I clicked it and it said "failed user login" or something like that and not allow me to log in. At this point, I was panicing. So I pressed the button off and restarted and click on safe mode. I went in there and read microsoft solutions. I tried to create a new profile, as he said, but it when I clicked on the Manage another account nothing poped upwards, as I tried it many times thereafter he'd still not jump upward. At this point, I'm lost and just wish I could go back to my regular computer and do my project and print, but this does not seem that this will probably happen in light of my computer is basically dead. All solutions would be useful. Thank you.

  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Read above on how to fix a corrupted user profile.

  YOU don't actually fix it, you create a new and move your data on him.

  See you soon.

  Mick.

• Several redirects URL after authentication of the user based on roles

  Hello
  I want to make several url redirects after login. It is:
  
  If a user connects to I want to open - 1.html.
  
  If user B logs I want open - 2.html.
  
  Please tell if this can be done in OAM or not and how do?

  First, create a simple policy area with Basic authentication scheme and test if you can you connect and see the home page of your application.

  Suppose you want to make redirects based on an attribute called user:
  myDepartment = IT, HR, finance, Support, HelpDesk
  Therefore, you should design 5 URLS for each of the departments above.

  Make sure that "myDepartment" is indexed in LDAP.

  The next step:
  Create a domain policy with the resources and rule rule & authentication check. Now, for the authorization, set the following:

  Authorization rules (5):
  AuthZ4IT, AuthZ4HR, AuthZ4Finance, AuthZ4Support, AuthZ4HelpDesk

  Definition of each:
  AuthZ4IT-> General:
  Enable wins: Yes
  AuthZ4IT-> Actions-> success of permission-> URL of Redirection:
  http://www.mycompany.com/it
  AuthZ4IT-> access-> rule:
  LDAP: / / / o = company, c = us? void? (myDepartment = IT)
  AuthZ4IT-> deny access-> role:
  Choose "any"

  Same for AuthZ4HR, AuthZ4Finance, AuthZ4Support, AuthZ4HelpDesk

  Expression of approval:
  AuthZ4IT or AuthZ4HR or AuthZ4Finance or AuthZ4Support or AuthZ4HelpDesk

  Now test the URL redirects.

  -shetty2k

• How to require authentication of the user in specific pages on my site

  I searched the forums to no avail to find precise details where I can set up the following on my site of Muse:

  1. Require visitors to create a user account.
  2. Need to connect in order to access specific pages.

  Any help or links would be appreciated.

  Tim

  You can not. These things requires a dynamic as backend Joomla, Wordpress or a Business Catalyst Pro account.

  Mylenium

• Authentication of the user - connection to different pages / PHP script / DW8

  Hi, I want to develop a PHP script to a login page that will direct users to different URLS depending on the URL address associated with their individual files stored in a MySQL database.

  I've set up a MySQL database that includes the fields username (1) (2) address, password and the URL (3).  I use Dreamweaver 8 and am relying on server behavior 'user log '.

  After selection all 3 fields in the table x y at - it a specific code that can be inserted in the option "If the connection is successful, go to" resolve this query?

  The following link refers to what I'm looking for... .but it does not provide an answer for PHP/MySQL!

  http://kb2.Adobe.com/CPS/158/tn_15881.html

  Thank you, Simon

  My Code so far:

  @mysql_select_db ($database_connLogin, $connLogin);
  $query_login = "SELECT username, password FROM USERS";
  $login = mysql_query ($query_login, $connLogin) or die (mysql_error ());
  $row_login = mysql_fetch_assoc ($login);
  $totalRows_login = mysql_num_rows ($login);
  ? > <? PHP

  Validate request to connect to this site.
  If (! isset {})
  session_start();
  }

  $loginFormAction = $_SERVER ['PHP_SELF'];
  If (isset($_GET['accesscheck'])) {}
  $_SESSION ['PrevUrl'] = $_GET ['accesscheck"];
  }

  If (isset($_POST['userName'])) {}
  $loginUsername = $_POST ['userName'];
  $password = $_POST ["password"];
  $MM_fldUserAuthorization = "";
  $MM_redirectLoginSuccess = 'members.php ';
  $MM_redirectLoginFailed = "tryAgain.php";
  $MM_redirecttoReferrer = false;
  @mysql_select_db ($database_connLogin, $connLogin);
  
  $LoginRS__query = sprintf ("SELECT username, password AND password OF USERS WHERE userName = %s is %s",
  GetSQLValueString ($loginUsername, "text"), GetSQLValueString ($password, "text"));
  
  $LoginRS = mysql_query ($LoginRS__query, $connLogin) or die (mysql_error ());
  $loginFoundUser = mysql_num_rows ($LoginRS);
  If {($loginFoundUser)
  $loginStrGroup = "";

  I think you can ignore it. Once you edit the code of a server behavior, Dreamweaver can recognize it is no longer. That's why you get the error message.