Touchpad switch does not

Similar Questions

• on/off switch does not work since the SIERRA

  Hello

  Since I'm sierra os that the on/off switch does not show me the dialogue window in which you can choose between power, reset, disconnect you.

  This is a problem of Sierra? There is an option in the system Pref?

  Thank you

  It works very well in the Sierra.  Simply press the button longer.

• Wireless communication switch does not work - Satellite A200 - 23 c

  The laptop has been included, and both a WI - Fi connection stopped working.
  Wireless communication switch does not work. Do not ask is it possible to do?

  Your English confuses me a bit little, but can you please tell me what model of laptop you have and what is the problem here?

  Wireless network card is enabled correctly in Device Manager?

• Tecra S1: Rf Ubuntu wireless switch does not work

  Hi all

  I recently bought an Intel mini-PCI wifi card for my Tecra S1 under Ubuntu. It is detected without any problem, Intel provides even native drivers for Linux. However, the hardware to activate wireless switch does NOT work. According to iwconfig, the radio is off. I use the ipw2200 driver which can detect the hardware and the software rf_kill. I can enable and disable software killing RF, but kill him material stays on.

  I suspect that the radio feature is disabled in the BIOS but I don't have Windows running on the laptop over to change the setting. Is it possible to access BIOS options under linux? Toshutils are not supported by the tecra because she seems to have a Phoenix BIOS.

  I hope you can help!

  Edwin...

  Hello

  Tecra S1 supports BIOS Toshiba you can access BIOS by pressing ESC at the beginning of the startup.
  In any case I think you won't find anything in the BIOS.

  If you are not able to use the switch of material on the side of the laptop then the Wlan card is not compatible or the hardware switch is malfunctioning. I would say that the card is not supported.

  Maybe the insulation of the 13 pin might help please check that this son:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19843&MessageID=74074
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15228&MessageID=56522

• Satellite L40-18 X - wireless switch does not work

  Hello

  I installed Windows 7 on Satellite L40 - 18 x, PSL48E, the installation seems correct. After installation I noticed that the wireless switch on/off (power) switch does not. The wireless network is working except the functionality of switch.

  It worked on Windows Vista. I installed all the up-to-date drivers for the network card wireless, including atheros, configfree, chipset drivers, but no effect.

  Please can someone tell me the possibole solution?

  concerning

  Salahaddin

  Hello

  I agree with resident.
  The Wlan switch on the side of the laptop has all the drivers and it works independently of the installed software!

  The FN + F8 key combination that allows the WLan should work on if install you value added package.

  You should also check if the WLan card is set on IT in Device Manager-> properties-> Advanced tab WLan card.

  See you soon

• WRTU54G-TM: switch does not connect

  I have a WRTU54G-TM router that allows PCs to connect directly via its LAN ports without problem.  However, whenever I connect to a switch, this switch does not have a good connection.  I tried several different CAT5 cables and two switches.  The two switches work fine when I take the router out of the loop.

  Here's the catch...

  The router is brand new, I thought it was a problem with the last router.  The company that I got helped me to solve this by phone and concluded that the LAN ports are bad.  Apparently, we were both wrong, that the problem persists.

  I tried with RIP enabled for LAN and "Both", but to completely disable RIP.

  Any ideas?

  To answer your question, Yes.  Yet the answer to my original question was in fact much simpler...

  Usually, I'm the only person in my house that affects my home network.  However, when there was a blip in the Internet just before this happened, the mistress of the House decided to help him out he willingly.  Needless to say, it was without direction and without good knowledge of what to do.  His diagnosis consisted of see the end of a CAT5 cable sitting near the switch.  Since you apparently have a House, she hooked up to the switch.  Unfortunately, the other end of the same cable was ALSO connected to the switch.  This creates a Terminal loop for all traffic based on cable, while wireless works fine.

  Leason learned...  Check your cables.

• Main menu of continuous bridge constantly appear on the screen, the main menu switch does not

  Original title: MAIN MENU

  Main menu of bridge keeps flashing constantly on the screen.  How can it be turned off?  The main menu switch does not work.  Thank you.

  I would check the FAQ of the gateway.

• My touchpad lock does not work, even if the orange light is on, indicating locked buffer. Probook4420s.

  My touchpad lock does not work, even if the orange light is on, indicating locked buffer. Probook4420s.  Windows 7 32 bit.

  Hello

  If the amber light is on the TouchPad itself, try double tapping

  If that is not activate, try uninstalling the device driver course Synaptics pointing, then restart the computer and download and install the driver from the link below.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4145435&prodNameId=4145436&swEnvOID=4052&swLang=13&mode=2&taskId=135&swItem=ob-86824-1

  Kind regards

  DP - K

• Touchpad/cursor does not

  I have a laptop of HP 2000; can't find the model numbers, or anything like that.

  My touchpad just in case works when I opened my laptop this morning. I am using an external mouse right now but need access to the touchpad. I already tried the following:

  Reboot 5 times

  Try the function keys

  Toggle switch: there is no light above the touch pad and double tapping does not any changes in light or function of the touchpad

  Reinstall the driver for the touchpad twice

  The research of properties of the mouse: lists not touchpad as a mouse device.

  Thanks in advance.

  Try a hard reset:

  Remove the AC and battery:

  Hold Power for 30 seconds

  reconnect the battery and AC and see if this brings back.

• touchpad mouse does not work

  For some reason the mouse on my laptop recently purchased does not work on the touchpad. But it works very well using an external wireless mouse. I have something off without knowing? Thanks for any help.

  Thank you all for trying to help. I solved the problem on my own. I discovered a small button with light and has an icon that looks like a Tablet next to the switch on the left side. I pressed it, the little light went off and the touchpad started working. I must have accidentally disable the touchpad when I turned on the laptop. You live and learn. Even the suggestions put forward by Acer support didn't understand this little button "secret."

• ENVY 15 t-j000 quad edition cto: outputs audio switching does not work in windows 10 birthday when the headset is connected

  Hi guys.

  As you know in 10 anniversary update windows, you can switch between outputs sound when the headphone is plugged directly from the sound icon in the taskbar, but it does not work as it should. If the headset is unplugged then the sound comes from the speakers and they are plugged in when the noise is coming from the headset and I can't select speakers. It shows two devices, but when I select one of them the speakers are selected. Also I tried to playback devices, but still, I can't put the headset as default playback device. She is forced to be like the only communication device. I've updated the audio driver but nothing has not improved. My audio driver is codec IDT high-definition. In addition, I tried the generic driver from the sound of microsoft, which is called "codec high definition audio" and it shows a device like speaker and it doesn't detect any helmet or communication device. So, what's the problem? I am able to use this option of windows 10 birthday or not? If yes how? I need this option because I use a headset a lot and I don't want to plug them each time. Thank you for your attention. I can give additional information if it is needed and I'm hear to help.

  Hi David,

  If you remember, I had problem with the IDT driver after upgrade to windows 10 and other updates. I'll be back to tell you good news. Finally, I solved the problem partially and I'll explain what I did.

  Today, I found that there is some audio drivers in the microsoft catalog site, so I went out there and looked for a codec high definition audio. A list came and saw that there are three tempo IDT Audio driver that are compatible with windows 10. They are all IDT Audio driver version 6.10.6504.0 and they are made in 2015. I downloaded all the drivers of three and tested. The first two of them does not solve my problem but the last which is "Tempo driver update for codec IDT high-definition" made in 08/05/2015 with 13.1 MB did the job. I must mention that you need to install this driver on generic windows sound driver for good results. If you install hp IDT drivers probably do not get good results. After installing this driver now I am able to switch between outputs audio (headphones and loudspeakers). The driver can detect my headset exactly as what it is. He shows me an output until I plug in my headphones and it then adds another exit in the helmet. I put my headphones or internal speakers as default playback device which I couldn't do with other drivers. There are just two problems that does not matter much to me, and I can't ignore them. The first is the light of the button mute on the keyboard does not work with this driver which is not very important, and the second is that there is no Equalization of beats in this driver and instead there is an audio driver IDT, which is very similar to the equalizer, but it beats not affect only the internal speakers the headphones that is more important to me because the sound via the headphones is very clear and good. If there was some ablity to HP to change this driver and add audio beats and allow also the light on the button mute then it would be perfect. The link for this driver is here:

  Driver IDT tempo for windows 10 and put on subsequent day

  Just download the latest driver with 13.1 MB size and enjoy.

• Satellite U50T-to-10F - keyboard and touchpad MOMENTUM does not

  I have a Toshiba Satellite U50T-A-10F, who did the usual round off the coast and was updated last night won't however when I turned it on the wheel mouse and keyboard does not work I managed to get hold of because the touch screen still works, but nobody knows why it would update then?

  Tried phone support but only open from Monday to Friday, I took out of warranty extended thanks to God!

  According to the bulletin of Toshiba technical support document, the touchpad can be disabled only and using the function keys it should be possible to activate the touch pad once more.
  Touchpad doesn't work anymore after upgrading Windows

• silent / ring switch does not work IPhone 6s

  The ring/silent switch on the left side of my iPhone 6s does not, when the button does not change any setting. someone knows how to fix this?

  It will be a problem of material associated with the "secret" key.

  If you have a warranty, then you should be able to get your phone replaced by Apple.

  In the meantime, you can use touch of assistance to activate and deactivate: 'settings - general - accessibility - Assistive Touch' - and device - mute/un-mute.

• Satellite A200 touchpad function does not properly

  Hello

  I spent a lot of time looking for the solution to my problem, but without effects.

  My touchpad does not work correctly. I mean, I can move the arrow and click on the screen, it's ok. But all other functions (volume, mailbox and other "virtual buttons" don't work)-the so-called "hybrid".
  I am connected to the USB port on the mouse.

  If I disconnect it, there is no change - the touchpad works only in basic mode.
  If I change the double mode in the settings of the touchpad to "always in Dual Mode when an external device is connected" - and all the virtual buttons work.
  But what do I do to make the mode of double the work even if the mouse is not connected (so that the power button works)?

  Thanks for any help,
  M.

  I m a bit confused now and I don t know what exactly you want
  You're talking about the touchpad, mouse USB, bi, etc..

  I put t know what you mean with dual mode and maybe you should give us more information about your operating system.
  And that you use the touch pad or mouse USB?

  Can you post a screenshot screen or something else?

  I put t know if this solves your problem, but have you tried to update the driver for the touchpad? You can find it on the Toshiba site.

• 6 sec new settings slider switch does not stay on (green)

  Switch used in environments does not stay on (green). When you try to configure the settings of the store, music, Apps and sliding switches books are moving reluctantly to green, stay green for a second or less and then back to white.  I want these settings to stay 'on' (green).

  Check

  Settings > general > Restrictions > accounts > allow editing (checked)

  Note, you must enable restrictions to see/do changes.