Exception file error...

Similar Questions

• Exception string: error in invoking target 'client_sharedlib' of the makefile on Solaris 11

  Hi all

  I am installing a 12 c on Solaris 11 SPARC 64 bit software and Installer throws the below error.

  tail /a01/oracle/oraInventory/logs/installActions2015-10-05_11-10-03AM.log shows error.

  INFO: Starting the process generated output:

  INFO: ----------------------------------

  INFO:

  INFO: /a01/oracle/finsft/12.1.0/bin/genclntsh

  INFO: genclntsh: failed to bind libclntsh.so.12.1

  INFO: * error code 1

  NEWS: make: Fatal error: command for target 'client_sharedlib' failed

  INFO: End of the generated process exit.

  INFO: ----------------------------------

  INFO: Exception thrown from action: do

  Exception name: MakefileException

  Exception string: error in the call to target 'client_sharedlib' of makefile ' / a01/oracle/finsft/12.1.0/rdbms/lib/ins_rdbms.mk'. See ' / a01/oracle/oraInventory/logs/installActions2015-10-05_11-10-03AM.log' for details.

  The exception severity: 1

  tail-f /a01/oracle/finsft/12.1.0/install/make.log

  TARGET_BINARY_INTERFACE =

  export TARGET_BINARY_INTERFACE

  nnfgt.c - CC c

  -f /a01/oracle/finsft/12.1.0/lib/nnfgt.o rm

  MV - nnfgt.o /a01/oracle/finsft/12.1.0/lib/

  / usr/CCS/bin/AR rv /a01/oracle/finsft/12.1.0/lib/libn12.a /a01/oracle/finsft/12.1.0/lib/nnfgt.o; FI)

  otherwise f ins_rdbms.mk client_sharedlib ORACLE_HOME=/a01/oracle/finsft/12.1.0//a01/oracle/finsft/12.1.0/bin/genclntsh

  genclntsh: failed to bind libclntsh.so.12.1

  Error code 1

  make: Fatal error: command for target 'client_sharedlib' failed

  Thank you

  Chubby

  I managed to solve this problem by double-checking the md5 values, it did not fit for p21419221_121020_SOLARIS64_1of10.zip, just downloaded the zip files again and matched md5 insured. installation went fine through this time!

  Thank you

  Chubby

• Error running VDR: Trouble reading files, error-3942 (delete Snapshot failed)

  Hello

  I currently have a problem with my VDR backups. as indicated in the title, the error I get is "error running VDR: Trouble reading files, error-3942 (delete Snapshot failed)".

  Background

  We are currently running VMware Vsphere version 4.0.0 on VDR version 1.1.0.707. We have a task of backup running in Vsphere that takes a snapshot of every night of the VM. It is then wrapped on tape for the archive.

  Question

  All of the virtual machine is backup successfully except one. I get the error message is as above: "error running VDR: Trouble reading files, error-3942 (delete Snapshot failed)".

  The backup task completed successfully, and the virtual machine can be restored from a backup. However, the virtual machine always has a snapshot and in addition, the virtual disk to the virtual machine is still attached to the host.

  The current will of this issue that we use is:

  (1) stop the VDR Server

  (2) remove the attached hard disk

  (3) to take a snapshot of the virtual machine

  (4) delete all snapshots.

  I would like to find a solution to the underlying cause, as the current will is tedious and time consuming.

  Another note, the logic unit number that the virtual machine is currently has a block size of 2 MB while all other virtual machines have a block size of 1 MB...

  If you need any additional info, feel free to ask.

  See you soon,.

  http://www.VMware.com/support/VDR/doc/vdr_120_releasenotes.html#upgrade

• CoreTelephony trace file error pops up suddenly

  I'm on iMac (retina 4K, 21.5 inches, end of 2015)

  Processor: Intel Core i5 to 3.1 GHz

  Memory: 8 GB 1867 MHz DDR3

  OS X El Capitan (10.11.3)

  When I turned on my computer this morning a message box is displayed:

  "CoreTelephony Trace file error"

  A file for CoreTelephony tracing operation failed, you might run out of disk space. Details "error opening file /tm/ct.shutdown,err = operation not permitted"

  Then I just ignored it but when I open Xcode and run my the simulator program is unable to start. I do not change Xcode or something. He thinks that he has been affected by this error.

  Please help me. Thanks in advance

  I get the same error message to unexpectedly without good reason

  My specs:

  MacBook Air (13 inch, early 2015)

  Intel Core i7 2.2 GHz

  8 GB 1600 MHz DDR3

  Intel HD Graphics 6000 1536 MB

  I tried a google search and didn't find any solution that seems to work

  I don't know if it's my antivirus Sophos or another application to the original of this

  I even installed the latest update and have the latest version 10.11.6 (15G 31)

  Any help please?

• Trace file error CoreTelephony - more (El Capitan 10.11.3) disk space

  Hello. My Mac (Macbook Air 2013) started crashing, most often when I have 3 + tabs open in Chrome, or when I play Football Manager and have Chrome open, as if it's getting overworked. Normally I could easily do this, and I've done it since I got my Mac. But suddenly he crashes, freezes and shuts down, and when I reboot I get this message before you start: it is said: trace file error Coretelephony a file for coretelephony tracing operation failed, you might run out of disk space.

  I have 56 GB / 120 GB left, it makes no sense.

  Someone had the same problem, or maybe a solution? Thank you.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• The reference must be closed on a reading-file error or not?

  Dear users,

  When I read a file, a reference is created one should close, when no longer used, should I? Here is a minimal example to my next serious question: should I close the benchmark on reading-file error or not? Is there a created in the case of "the file does not exist"?

   

  See you soon,.

  No, when used in this way, the references created by the file read and write functions should not be closed - thought that he would have no negative effect if you did.

  In addition, you do not want or need the structure case around a reference close the function.

  Mike...

• Failed to retrieve. Files - error indicating 0 * 80004005 zip

  Original title: Search search index indexing re-indexing re-index research research research service troubleshooting troubleshooting

  I can't extract the zip file. error 0 * 80004005

  Hello

  1. What is the operating system installed on the computer?

  2. What is the source of the Zip files?

  Method 1 : open the file in administrator mode and check if the problem persists or not.

  A: Right-click on the file you want to extract and select run as administrator.

  Method 2 : temporarily disable the security software and check if the problem persists or not.

  Method 3 : change the location of the extract and check if the problem persists or not.

  Hope that helps.

• Tried to install downloaded like mozilla and google chat .exe files but recover corrupted file error!

  I just new laptop ASUS K42F with Windows 7 Home. Tried to install the basic downloaded such as Mozilla and Google Chat programs, but continue to get the "corrupted file error (more information go to nsis.sf.net/NSIS_error). How to remedy this situation so that I can download updates etc in the future.

  Hello

  There are many different factors can be attributed to your question.  It could be your network card, a problem with your ISP, Modem, or any other number of things.  Something happens during the download process that causes your files get corrupted.  We would like a little more info to help solve your problem.

  Are you connected via a wired or wireless?
  If you are connected wireless; you could try to connect with a wire and then try the downloads.

  Who is your Internet service provider, and what kind of equipment do you use to connect to their service? 

  You may have a faulty modem.  You can call most of the suppliers and ask them to test your equipment/connection to see if it is the problem.

  You have other computers on your network?

  If the answer is "Yes"; do you have the same results as the download of files on them?

  All type of internet security applications or third-party firewall you use?

  If the answer is "Yes";  try temporarily disabling them and download your files.

  You are connected to a router?

  If you are, try to connect directly to the modem and see what kind of results you get.

  If none of this helps, please post your hardware specs so that we can give you more troubleshooting steps

• Config file error

  Hello

  I could play Bejeweld 2 on my laptop. This game is in the 'Games' folder in 'programs' under the Start button. But from today I'm not capable of playing Bejeweld 2 or any other game that is located in the folder "Game". All I get is an error message saying the following: Config File error cannot open file (line 0, column 0).

  I use Internet Explorer 8.0.7600.16385

  The only game that works is called Solitaire.

  I would like to help resolve this. I tried the Microsoft Fix It, but that is only an error and could not continue the analysis of the computer.

  Best regards

  Kelly Heijn

  Hi Kelly Heijn,.

  1. Only tried Microsoft fixit?
  2. When was the last time it was working fine?
  3. Did you the latest changes on the computer?

  Check if you can run games in SafeMode.

  Note: Screen would be inappropriate in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  If the above step failsthen, I would say that SFC scan running on the computer that would be a search for files corrupt on the computer system and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• XP Pro SP 3 firewall blocking UDP 137 and 138 even though exception "File and Print sharing" is selected

  I am running XP Pro SP 3 on a working group. I'm trying to access the files from a Windows 7 machine on the same workgroup. But the XP firewall blocking UDP 137 and 138 even though exception "File and Print sharing" is selected. When I disable the XP firewall, all right.

  Here are a few entries in the firewall exception log file:

  2012-06-01 09:53:25 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:26 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:27 DROP UDP 192.168.2.2 192.168.2.255 138 138 202 - RECEIVE
  2012-06-01 09:53:28 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:28 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:29 DROP UDP 192.168.2.11 192.168.2.255 138 138 202 - RECEIVE

  I did some research on another site, and I came up with the FIX for this issue. It has to do with the node XP somehow getting ready to type "Peer-to-peer". I applied the fix in this article:

  http://support.Microsoft.com/kb/903267

  and the problem is now solved.

  Please come back and let everyone know how you fixed the end!

  However, the fact that this has happened and you don't know how concerned me (if it was my machine).

  Here's what I propose for extra cleaning:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

• I can't attach photo to my hotmail, keeps file error occurring

  I tried to reduce the size of the images and downloading various files. Still the same error saying that there is a file error and maybe I lost the internet connection, but this is not the case. I've never been wrong before.

  See...

  HOW to optimize Internet Explorer for Windows Live Hotmail
  http://windowslivehelp.com/solution.aspx?SolutionID=3c7c3338-369E-4220-B29D-71ce660fe5a0

  You connect to the internet via mobile modem (USB) wireless by chance?

• I'm looking for (file error: HKCR\CLSID\ {1171A62F-05D2-11D1-83FC-00A0C9089C5A}- & DELETE THIS FILE?) Can someone please? Thank you

  This same file continues to be found by me a scan, but cannot be deleted, to come as a file error. How can I find & he retire?  (file error: HKCR\CLSID\ {1171A62F-05D2-11D1-83FC-00A0C9089C5A}-can someone help please?) Thank you

  Get a most recent virus scanner. OneCare is obsolete. Its been replaced my microsoft security essentials

• What is "Error of Privoxy" Privoxy (oooooobo) fatal error: could not check the configuration file ':(error number 2) Config.Txt

  What is "Error of Privoxy" Privoxy (oooooobo) fatal error: could not check the configuration file ':(error number 2) Config.Txt.

  I always get this message in a long horizontal area on my desk top once I restart and turn on my computer.

  Thank you

  "Privoxy" is a 3rd party is no program not part of Windows XP.  You can go to
  Panel-> Add/Remove programs
  and remove this program.  If you still think that you need this program, try reinstalling it on Sourceforge
     <>http://sourceforge.NET/projects/ijbswa >

  HTH,
  JW

• system32\DRIVERS\pci.sys missing or corrupt file error but windows xp is already preloaded on computer when purchased

  missing or corrupt file error system32\DRIVERS\pci.sys keeps appearing. I had a problem with google chrome and then stop everything. This error appeared. It tells me to use the cr rom boot but xp was already loaded on the sony vaio that we bought a few years ago. I don't know what to do next because I don't want to lose the pictures and music, we have on the hard drive. Any help would be appreciated

  If your data is not backed up, then at some point that the data will be lost.

  Your Sony are delivered with a hidden restore partition or recovery disks, but I do not think that the Sony recovery allows to repair an installation of win, only pure install.

  You must remove the drive and it slave on another PC in order to retrieve the data, or take it to a decent repair shop for them to do it for you

• My Cookie file was corrupted in data and my programs continually pop up with the 'corrupt file' error when a program opens, pointing to \Users\name\Appdata\Roaming\Microsoft\Windows\Cookies.

  My Cookie file was corrupted in data and my programs continually pop up with the 'corrupt file' error when a program opens, pointing to \Users\name\Appdata\Roaming\Microsoft\Windows\Cookies.

  The problem is, Chkdsk will not fix this, and I can't access the file. This opens up a world of problems when I need to fix this error, so I can upgrade to Windows 7. Help, please!

  I just ran the scan again. He said of the errors found, but could not be repaired.

  This problem actually has nothing to do with internet explorer. It's the cookies folder that is corrupt in the Windows folder in roaming. The error file is in conjunction with the programs, that I try to run (AIM, Skype, so forth). Trying to enter the folder it says it's corrupt. I don't know what is the root of the problems or how to solve this problem, but these measures have not helped so far. Regarding the repair, I will try that next.

  http://Tinypic.com/view.php?pic=14mw4ly&s=4

  Here is a picture. This is the error of the lower right

  It's what the tool SFC to see system files corrupted and try to repair the system files.
  SFC could not fix it.

  Looks like you will need to do this:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Read the info on the link above.

  Good luck with it.

  Let us know how you go with it.

  See you soon.

  Mick Murphy - Microsoft partner