Exception in DisplayRunMap.runMap problem

Similar Questions

• What is an exception in DisplayRunMap.runMap?

  I have a HP Pavilion (processor AMD Athlon XP) with both a DVD-RW/CD-RW DVD writer/CD writer combo & a player of CD-ROM I tried to do a test of the dvd - rom drive and when she started I received the following message. "Message from the Web page: Exception in DisplayRunMap.run map. The test stops. -What this means and how can I solve this problem?

  Hi DEBORAHTOMLINSON,
   
  -Is your DVD player without any problem work?
   
  If your CD/DVD drive does not work, then run the troubleshooter from the link given below:
   

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

• Compaq Presario desktop XP-problems connecting / came with the settings and files of the previous owner

  My Director ex-chorale of the Church and his wife (was his computer) moved to Minnesota and gave me this Compaq Tower and the monitor speakers.  She cleaned me all of hers off the coast.  Well, she didn't.  She switched to the network connection and modem.  I'm low on memory.  Help support & the beginning, Compaq support and connections says "unable to connect to the server."  I have fast Internet with Comcast cable.  His modem is Gegere or something and the network connection is RealTek 97 Fast family and mine is Arris (modem).  Specifications of the computer:

  XP Edition family c. 2002 SP3

  Compaq Presario Intel inside Celeron (R)

  CPU 2.53 GHz

  248 MB of RAM

  CD player works but the DVD player does not open.  Connection is so slow that it takes 5-10 minutes to open anything.  IE8 gets constantly "stops responding."  Just like Firefox.  When you try to close a window or stop start, end the program box comes back and comes back again and again.

  Went to start-help & support-Compaq help and did some tests.  For Audio, etc. get: "Exception in DisplayRunMap.runmap.

  Only had this computer for 2 weeks and did nothing to save.  Can reinstall Norton Security Suite for Comcast and my Microsoft Professional 2007 from a cd.  Thought to do the system recovery.  This OS came with Compaq and recovery CD system recovery option and there is F - 10 System Recovery on initialize toward the top.  Are they the same?  I first have to install Windows XP on a bunch of CD?  Can't make a DVD if the drive does not open.  The button is loose and nothing happens.

  I am 63 and security social disability so can not afford a new computer, or to hire a technician.  Help, please!

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The above requested information on the side, back, or bottom of your computer. , Please do not include your serial number.

  The 'F10' and Compaq system recovery of Windows XP system recovery are the same thing. You don't need to create "HP recovery discs" before making a recovery, but you may need these disks at a later date. If a set of disks has already been created, you will not be able to create a second series and you may need to buy a game from a third-party vendor.  With the complete model number name and/or product will allow us to direct you to a place to buy these records, if necessary.

  Please click the White Star of KUDOS to show your appreciation

• [Firefox [36] Impossible to add exceptions to untrust link with netscreen firewall

  Hello

  When I go to 36 of Firefox, I "Add exception to untrust connection" problem with firewall netscreen.

  The problem is that it will display the normal screen of "this connection is or trust ' with the 'Exception' button added to this Web site, but if I clicked on the button, nothing happened.

  But this problem seems for the moment only with the web console for a netscreen firewall (the link is https://IP/nswebui.html), another website doesn't have this problem.

  I tried to reinstall Firefox, but it cannot solve the problem.

  Would you kindly help?

  Thank you

  Daniel

  Hi, I can confirm the following facts, and I want to be useful.

  1. Similarly, I tried Claire Installer Firefox 36 in a new computer, I can not even add exception to our web console of firewall (https://[IP]/nswebui.html)

  2. because of point 1, I immediately download Firefox 35 and downgrade my firefox PC, IT IMMEDIATELY WORKS AND CAN add THOSE EXCEPTION BACK, and now I can manage my rear firewall.

  Now I can consider my problem being solved by myself, but if there is anything I can / helps to debug it, I'm happy to help you.

  Thank you!

  Daniel

• Equium A200-15I keyboard problems

  Hi all

  I have recently been given the above laptop it has a keyboard very worn with a few missing keys etc... Having bought a replacement keyboard I got it replaced, and it seems to work ok except for a few problems. Close keys don't seem to work or work strangely, for example:

  -nothing happens when I press "A" key, but when I press "S" key, I find myself with "qs" appearing on the screen
  -Same problem with 'Q', when I press the button, nothing happens but if I press 'W', I find myself with a tab size space key and a 'w' but not 'q '.
  -'a' appears, along with a "when I press the button to the left of the"1"key
  -the 'X' button also does not work, but did not appear with anything else again.
  -Same with the key 'E '.
  -by pressing the '2' key fact appears "12", while pressing on the '1' works well
  -windows key, also does nothing.

  The shift and caps lock keys work fine. The keyboard was nevertheless new out a package, it is true that on ebay, but the new. I guess the main culprit could be a faulty keyboard, but the letters appear when others touch seems weird.

  If anyone else has experienced this problem or have solutions? Whatever that either would be appreciated.

  Hello

  I think you should test another external USB keyboard.
  If the USB keyboard would work correctly, the problem is related to the new internal keyboard.
  Parts bought from Ebay could be compatible or if you have bad luck, the part will be not compatible or even defective.

• Portege 7200 multiple problems

  Hello

  It is my last ditch attempt to try and get some sort of difficulty for my Portege 7200.

  I will try to explain as best as I can, so this is.

  I had a system dual boot (Linux & Win98), did not want Linux HD so formatted and reinstalled Win98.

  Everything works except for a few problems that I hope you guys can help with.

  1. at startup (before windows logon) I am invited with cannot find VREDIR. VXD and a few other VXD files.

  2 screen dislikes the adapter PCI/AGP of Trident Cyberblade e4-128. Only the driver installed, that followed the instuction on the Toshiba tools and utilities cd-rom. keep getting invited to change my display at startup configuration. Once logged into windows screen does not match the entire screen (black border). Have used the companion disc one receives with the Portege to stretch the LCD. The screen is bigger, but the display quality is bad.

  Can anyone help as I am at a loss on any one of the above point.

  Kind regards

  Joe

  P.s. If there is more clarification or information then pls let me know and I'll try my best to get it.

  Hello
  most likely, these files are not at all. This message usually when these files become 'independent' in the registry, or when certain network/protocol device missing files.
  The problem with these files occurs generally when you install something in the network control panel that does not install correctly.
  If you have recently installed a network adapter or Protocol in your system, remove it and reinstall it.
  The IPX protocol is often also responsible for this message.

  Good bye

• Satellite A300 and wireless connection problems

  Recently, I had to use my recovery disk and restored my laptop to factory settings. Almost everything is back is the way has been, except for a small problem.

  The WiFi does not work. It is on, but when I go to connect to the wireless family network, it tells me to insert a cable.

  My laptop is the Satellite A300 - model psagca.

  I install the drivers of Realtech and still not get the case.

  Thank you in advance.

  Your wireless network is not visible to your laptop satellite?

• Format microtour Dx6100 display problems.

  Hello

  I have a computer format microtour dx6100.

  I've upgraded to windows 7 64 bit and everything works fine except that I have problems with the display.

  The VGA output will not go in widecreen? I can't find a driver for this problem.

  I also tried to install an Ati x300se video card pci-e 128 MB that I thought it was compatible but it seems other people have got it to work in vista compatibility mode but I have no luck with it it keeps crashing when trying to install.

  Does anyone have any suggestions of what I can try?

  Regards, Alex.

  Hey, Alex:

  Have you tried this driver for the x 300?

  http://support.AMD.com/en-us/download/desktop/legacy?product=Legacy1&OS=Windows 7-64

• Satellite C855-1UU close problem, notebook turn on itself

  Hi all,

  I hope someone can help, I need to know what to do. I bought this laptop C855-1UU Satellite two days ago, and I'm afraid she has certain shortcomings.

  Everything works fine, except that I have problem when I power the laptop off. I use Linux OS (tried with Sabayon and now on Manjaro, I wanted to just check is this OS or hardware problem).

  It is:
  When power off the computer laptop (with icon or via the console command), phone off... then turns stays off for about 5-10 seconds and then switch on by itself without any reason!
  I tried to determine what could be the possible reason, and I found that occurs only when the battery charger is connected. Tried it with the battery removed, with loading the BIOS default values, nothing changes... always turn on itself.
  When unplug charger laptop battery and try to power off the computer, it works.

  Any suggestion, idea or advise what to do?

  Thanks in advance!

  WBR
  Dejan.

  Post edited by: Dejan_2

  Okay... found answer is related to Linux, not laptop.

  BRACO
  Dejan.

  Post edited by: Dejan_2

• problems with VOIP on WRP400

  Hey all. I bought this router for a friend of mine. mainly for the side of voip as their old one kept freezing. long story short, I was able to get all this work, phone calls and talk to all work except for a small problem, called cutting after about 30 seconds! but they come back another 10 seconds later. This is the most weird thing I've seen. We live in Australia and the provider is gotalk. I tried different audio codecs and ive checked the internet connection. everything is in order on this side here. all you other ideas?

  You can try upgrading the firmware on your router.

  Try this link .

• Stuttering Audio Windows 7 problem

  ^.^

  I bought a new computer in October 2009 with a Win 7 64 bit
  BONES, a Realtek audio system on the motherboard, and I added a
  NVIDIA card top of range for gameplay purposes.

  I'm having the same problem of audio stuttering than many others
  meet people. I've installed every update Realtek of
  2.33 to 2.40 and none of them worked. I tried to install
  Some drivers of Vista, but Windows doesn't let me.

  I totally love Win7, except a little insidious problem. While
  looking around some of the other Windows forums, it seems that the
  general train of thought is that the question has something to do with
  Windows 7 itself and I agree, after trying several driver-centric
  solutions.

  One of my friends was on the beta for Windows 7 test, and he had not
  This error.

  Thank you very much

  John B.
  Laramie, WY

  Hi John,.

  As mentioned above, please get in touch with the manfacturer because they are the best people to offer support.

  Kind regards
  Aziz Nadeem - Microsoft Support

• Selection of 64-bit Windows 7 text-to-speech: problems & Solutions possible

  There are several problems with the default value of the TTS voice implementation in
  Windows Server 2008 R2 and Windows 7 64-bit edition.

  Control Panel TTS voice option lists only properly registered
  Voice of 64-bit. Microsoft Anna is the only 64-bit voice which is
  provided with operating systems. Kate of Loquendo, which is
  probably the best voice quality TTS that is currently available,
  a versions 32 and 64 bit. Kate is difficult to obtain in small
  quantities and very expensive. The best alternative is
  considered Heath voice Acapela Group. It is only
  currently available as a 32-bit version for Windows operation
  systems. (64-bit Heather is available for Apple Snow Leopard).

  There is a fix that allows the display of all installed voices and
  the selection of any one as the default voice of the system. It's
  run:

  C:\Windows\SysWOW64\Speech\SpeechUX\sapi.cpl

  instead of using the selection of voices TTS of Control Panel.
  This fix works fine except for one unfortunate problem.

  The statement of Visual C/C++

  HR = m_cpVoice.CoCreateInstance (CLSID_SpVoice);

  Configures a voice object regardless of the default value correctly
  Voice System.

  The Visual Basic statement

  Voice = new SpeechLib.SpVoice

  causes a system crash or a program abort if the defect has voice
  summer set on something else than a properly registered 64 voices
  as Anna. 'Try Catch' is not catch this error. Note that
  Set the voice = CreateObject ("SAPI. SpVoice") fails with the same
  error.

  There is no easy solution to this problem. It may, however, be lower
  64-bit TTS voice concern as more become available.

  First of all, Microsoft should certainly change the TTS box command
  to use the same code as "C:\Windows\SysWOW64\Speech\SpeechUX\sapi.cpl".

  Second, Microsoft should correct the problem with the way in which
  The statement Visual Basic 'voice = New SpeechLib.SpVoice' functions.
  There is no reason that this cannot have the same capacity as its
  Visual C/C++ counterpart.

  Third, the application programs that use TTS could be written entirely
  in Visual C/C++, the creation of the object of the voice could be in one
  Control ActiveX Visual C or a wrapper might be used to access
  CoCreateInstance.

  Fourth, it is possible to modify the voice so registry entries
  that the ILO 32 voices work with control panel TTS list. It's
  easy to change the registry so that the voices are displayed. He
  is, however, a consistent error message on failure of the audio
  output. TTS registry entries are generally well documented.
  Unfortunately, there are multiple entries for which there no publicly
  documentation available. This in addition to a lack of technical assistance from the
  either third party sellers of TTS or Microsoft voices makes
  Cannot resolve the registry at this time entry.
  These registry problems are not a problem when you use
  'C:\Windows\SysWOW64\Speech\SpeechUX\sapi.cpl '.

  Fifth, one of the major reasons to be able to change the system
  by default the voice TTS is to offer a choice to vote for programs
  as MapPoint that automatically select the default value of the voice system.
  There is no choice to the user to change the voice of MapPoint.
  He has a key to register MapPoint
  HKEY_CURRENT_USER\Software\Microsoft\MapPoint\17.0\USA\PreferredTTSEngine
  It seems as if the TTS voice can be selected. Unfortunately, he
  There is no documentation for this entry and change the name of voice is not
  override the default value of the voice system.

  Sixthly, the registry entries could be changed by program as well
  the default voice to meet the requirements of
  'Voice = New SpeechLib.SpVoice' only for this one statement. The
  original Scriptures are then replaced before further use of the
  The object of the voice.
  It's far from perfect, but we chose this approach as the
  best current compromise for our programming environment. One
  unfortunate limitation is that Windows 7 64-bit and Windows Server
  2008 R2 use different paths of directory registry TTS and values for
  DefaultTokenId.
  By the way, is an invaluable tool for working with the registry
  Workshop to register for X 64. It can do copy/paste and more
  several other useful registry operations.

  The following code snippet illustrates the method.

  'Created inside of Form_Load and released within Form_Unload.

  Dim WithEvents Voice As SpeechLib.SpVoice
  Dim modifyRegistryFlag As Boolean = False

  "Form_Load code snippet.

  Dim keyName userRoot, subkeys, defaultString, anciennechaine As String
  Dim OSName, OSPlatform, OSVersion As String
  OSName = Trim (My.Computer.Info.OSFullName.ToString)
  OSPlatform = Trim (My.Computer.Info.OSPlatform.ToString)
  OSVersion = Trim (My.Computer.Info.OSVersion.ToString)
  If InStr (1, OSVersion, "6.1") > = 1 Then
  modifyRegistryFlag = True
  If InStr (1, OSName, "Microsoft Windows 7") > = 1 Then
  "Path of the Windows 7 64-bit registry directory
  userRoot = "HKEY_CURRENT_USER".
  subkeys = "Software\Microsoft\Speech\Voices."
  ' Default string DefaultTokenId for Windows 7 64 bit
  defaultString = "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Speech\Voices\Tokens\MS-Anna-1033-20-DSK.
  On the other
  If InStr (1, OSName, "Microsoft Windows Server 2008 R2") > = 1 Then
  "Path of the directory of registry for Server 2008 R2
  userRoot = "HKEY_USERS".
  subkeys = '. '. DEFAULT\Software\Microsoft\Speech\Voices ".
  ' Default DefaultTokenId string for Server 2008 R2
  defaultString = "HKEY_CURRENT_USER\SOFTWARE\Microsoft\Speech\Voices\Tokens\MS-Anna-1033-20-DSK.
  End If
  End If
  End If

  keyName = userRoot & "\" & subkeys

  If modifyRegistryFlag = True Then
  ' Retrieve the name of the default voice
  anciennechaine = «»
  Try
  anciennechaine = Registry.GetValue (keyName, "DefaultTokenId", "-1")
  Catch ex As Exception
  MessageBox.Show (ex.) Message.ToString, ' TTS Error: Get current default Voice ", MessageBoxButtons.OK, MessageBoxIcon.Error, MessageBoxDefaultButton.Button1)
  Exit Sub
  End Try

  If anciennechaine = "-1" then
  MessageBox.Show ("No DefaultTokenId", "TTS Error: Get current default Voice", MessageBoxButtons.OK, MessageBoxIcon.Error, MessageBoxDefaultButton.Button1)
  Exit Sub
  End If

  ' Name of the default configuration to Anna if she is not the default
  If anciennechaine <> defaultString then
  ' MessageBox.Show (anciennechaine & + "\n" & defaultString).
  Try
  Registry.SetValue (keyName, "DefaultTokenId", defaultString, RegistryValueKind.String)
  Catch ex As Exception
  MessageBox.Show (ex.) Message, "TTS voice of default error: Set", MessageBoxButtons.OK, MessageBoxIcon.Error, MessageBoxDefaultButton.Button1)
  Exit Sub
  End Try
  End If
  End If

  ' Creates the object of the voice
  Try
  Voice = new SpeechLib.SpVoice
  Catch err As Exception
  MessageBox.Show ("Error creating SpeechLib Voice" & vbNewLine & err.) Message, "TTS Error", MessageBoxButtons.OK, MessageBoxIcon.Error, MessageBoxDefaultButton.Button1)
  Exit Sub
  End Try

  If modifyRegistryFlag = True Then
  "Restore default original voice."
  If anciennechaine <> defaultString then
  Try
  Registry.SetValue (keyName, "DefaultTokenId", anciennechaîne, RegistryValueKind.String)
  Catch ex As Exception
  MessageBox.Show (ex.) Message, "voice TTS Error: default restore", MessageBoxButtons.OK, MessageBoxIcon.Error, MessageBoxDefaultButton.Button1)
  Exit Sub
  End Try
  End If
  End If
  Robbie

  I used System.Speech with c# and .NET version 2 (visual studio 2005 - windows forms project) and the same problem occurred with me.

  The solution was change the given target, from "Any CPU" to "X 86". (Project-> properties-> Build).
  Works like a charm too :)

• Problem with dismissing the dialog box

  Hello world

  This is my first post here. Sorry if the question is very simple...

  I need to download an image on server. I display a dialog box to confirm if the file should be downloaded.

  Everything works well except that the dialog box is dismissed after that the whole process is over. I know I'm missing something-related threads. pls help me to understand.

  Here is my code:

  public void fieldChanged(Field f, int context) {
      if (f == addButton) {
                      FileSelectorPopupScreen fps = new   FileSelectorPopupScreen();
          fps.pickFile();
          theFile = fps.getFile();
  
          if (theFile == null) {
              Dialog.alert("Screen was dismissed.  No file was selected.");
          }
          else {
              UiApplication.getUiApplication().invokeAndWait (new  Runnable(){
              public void run(){
                  int confirmationResult = Dialog.ask(Dialog.D_YES_NO, "Do you                    want to upload?", Dialog.YES);
                  if (confirmationResult==Dialog.YES) {
                           status=1;
                  } else {
                           status=0;
                  }
              }
            });
  
          }
  
          if(status==1){
              Thread t= new Thread(){
                  public void run(){
                      //MY CALL TO WEBSERVICE                     }
              }};
  
              try{
                  t.start();
                  t.join();                                           refreshData(); //call to method to post the image data to server                        //and refresh the screen with new image
              }
              catch(Exception e){
  
              }
  
              }
          }
  
      }
  

  My problem is that the I selected YES the dialog box only after the call to webservice licensees are completed and the image is published on the server and the screen is refreshed with the new image.

  Let me know what I'm missing.

  Welcome to the forum!

  Correctly, you start the process of network on a separate Thread.  Then you attach the wire event for this Thread by using the following instructions:

  t.Start ();
  t.Join ();

  So you give up the thread of events not until your networking activity has finished.  It does not block your event feed so that your application will become unresponsive to the user and as you noted, activities requiring feed event, such as the removal of your dialog box, cannot occur.

  You must reprogram your treatment so that the activity of the network as a completely asynchronous operation.  You can't wait on this.  You should get to tell you when it has finished.  I suggest that looking at the observer model during the implementation of this process.

• Windows 7-problems with the laptop computer's System32 folder

  I bought this brand new Acer Aspire 5251-1005 computer laptop a week ago from Best Buy and it comes pre-installed with Windows 7. Everything went beautifully except for an unknown problem. A guy organized, I have some of my important programs pinned on my taskbar (for example, MSN, office, Skype etc.). However, when I right click in a program (ie. MSN) and click on a task (IE. Mail box), this task is not activate Instead, my System32 folder opens... Very weird.

  I searched on several forums. I tried to do a system restore (quite a pain to reinstall everything) and did not work. Tried to activate my guest account to check if my account is corrupted. This was not the case.

  If anyone has a solution (hopefully one that doesn't require too many steps) Please help me!

  I had the same problem with ACER 5251-1513, and it turns out to be a third trial that Shredder calledEgis Tec included with MyWinlocker suite program.

  After you have uninstalled Egis Tec Shredder, the system is returned to normal.

• Occasional SocketBaseIOException "Connection refused" problem on R5.0

  Hello

  I developed an application that uses an https connection to communicate with a web service using data in XML format. I did test in-depth the application on 9000 "BOLD" 4.6.0.28 2 current execution with all sorts of conditions of access network (Wifi, 3G, Edge) and everything worked well for me on the Rogers network.

  I have improved my 9000 to run OS5.0.0.411 and I now get the following exception in my logic of connection:

  SocketBaseIOException "Connection refused".

  In characterizing this problem, it seems to only happen once every 5 to 10 connections. Even more, it doesn't happen when I turn off my cell transmitter and go on WiFi only.

  I rebuilt my application for 5.0 with the string of tools Eclipse 1.1 to 5.0 and get the same problem.

  In a debugging perspective, I have a real problem, because:

  (a) with Eclipse 1.0 JDE I can attach it to the device, but cannot set a breakpoint.

  (b) with Eclipse 1.1 JDE I can't yet set to the device.

  Suggestions to help isolate or work around this problem would be greatly appreciated.

  I was unable to find a root cause or an elegant solution to this problem. However, I could characterize enough to work around him in an acceptable way. I'm capturing the info hear so I hope this helps someone else. This has been a difficult one to isolate and characterize. Here is a summary.

  Even if the underlying stack could not create a connection https on the BIS service identified by a Service UID book, it would be on the first 'open '.

  1 generate the SocketBaseIOException.

  2. somehow to cache the connection so that 'open' later against the same URL would cause the stack return the connection from 1. which, once the IO later would generate the same exception.

  This problem moved not on WiFi connections or the Simulator.

  My work around was to create a cache of years to keep track of services with these embarrassing the UID and avoid them in the selection of connection logic.

  I guess this problem is also specific carrier because he had other services in the service with CID of IPPP log "" what has worked well for me. I have test it on the Rogers network with a BIS service.

  Hope this helps someone out there, and maybe someone rim could look at this rather clumsy difference in behavior in R5 compared to what's happening on A4.6