Exception of closed connection

Similar Questions

• unexpected exception - reset the connection

  Hello
  
  I used to see this warning message, and then my does ' t of the web application does not not after this warning (due to DB connection reset).
  

  WARNING: RAR5035:Unexpected exception while destroying resource from pool 
  Exception message: Error while destroying resource :IO Error: Connection reset

  It seems that there is a scheduler that checks the DB connection in the container so it pops up this message.
  
  But why I am facing this error? The network is fine since I ping on my database server.

  The network may be good, but the connection object is in a State of limbo, apparently.

  But why I am facing this error?

  Yes, something is wrong. That something can be a list of possible sources which if you sit down and try to list them all you would probably forget at least two dozen. Let me quote an answer of EJP stack overflow:

  "There are several possible causes.
  -L' other end has deliberately reset the connection, in a way that I will not documented here. It is rare and generally incorrect, application software to do this, but it's not unknown for a commercial software.
  -* Most often, it is caused in writing to the other end has already closed connection normally. "In other words a protocol error.* application.

  http://StackOverflow.com/questions/62929/Java-NET-SocketException-connection-reset

  As you can see very general and it is because there is no direct answer to it. My feeling is that it is a sort of configuration timeout and closing of the database, which can be "the other end" mentioned in the quote.

  Published by: EJP on 11/08/2012-08:54: fixed an error in the quote from me

• Transaction after closed connection behavior?

  Hello
  
  Using JDBC, while doing multiple inserts in a transaction, this Exception was thrown:
  
  java.sql.SQLException: closed connection
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:208)
  at oracle.jdbc.driver.PhysicalConnection.prepareStatement(PhysicalConnection.java:873)
  at oracle.jdbc.driver.PhysicalConnection.prepareStatement(PhysicalConnection.java:792)
  
  Accordingly, the commit() statement would have been forgotten, and the control went to a catch block where restoration has been attempted. With the connection being closed, this resulted in another Exception:
  
  java.sql.SQLException: closed connection
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:208)
  at oracle.jdbc.driver.PhysicalConnection.rollback(PhysicalConnection.java:1170)
  
  If the transaction doesn't has been neither explicitly committed or rolledback by client code.
  
  The connection has been returned to the pool (which I suppose it thrown).
  
  The program then continues by obtaining a new connection from the pool. He began a new transaction with setAutoCommit (false) and started reading the data.
  
  Surprisingly he read the data written in the previous operation (I thought failed with clamp is closed by an external factor).
  
  The program has not changed isolation level transactions, so if I understand correctly, that is still the default value of READ_COMMITTED.
  
  I'm trying to understand what happened here. My understanding is that a local transaction occurs in a session and according to the JDBC docs, a connection is equivalent to a session. Yet, by the only explanation I can offer for the effects that I've seen, it's that here an be persisted between the two separate connections and the beginning of a transaction in the second connection resulted in the validation of the previous transaction half finished in the previously used connection.
  
  Is this possible? This kind of thing is documented anywhere?
  
  See you soon,.
  Derek

  Hello
  documentation (Oracle® Database JDBC Developer's Guide and reference chapter 3, Oracle version 10.2) stipulates that:

  If the autocommit mode is disabled and you close the connection without explicitly validate or restore your latest changes, then an implicit VALIDATION operation is performed.

  This corresponds to what you have observed.

  If you describe the libraries you use (es Spring AOP, plain JDBC, Hibernate, etc) I think that the forum users can proviode of the other suggestions/workarounds.

  Ciao,.
  Giovanni

• Flop native SOAP service: "Closed connection..", ready for production?

  Our system: Oracle 11 g 2 on CentOS Linux X 64.
  I followed the instructions here: http://www.oracle-base.com/articles/11g/NativeOracleXmlDbWebServices_11gR1.php, well, I can view the WSDL on browser. Now for the real world test, I wrote an application in Visual studio.net 2010 to use the service, after the first time (the value returned successfullly), I had such as:
  The underlying connection was closed: a connection which was to be kept alive was closed by the server.
  
  I googled and tried all sorts of tricks, like keepalive = TRUE but no joy. Some people suggest that .net has a bug, so I use SOAPUI and SOAPsonar, which returnes same error "the underlying connection was closed." I tried to do the session timeout also not long as possible, still no help, it seems to run out of options, so I tried to configure Oracle HTTP server (instead of the Embeded bridge) a point of entry for /orawsv (I couldn't find any example for this type of HTTP server to help with the configuration of the service web so I took one configuration of the APEX in the dads.conf file) but it did not work , so there is almost the end of my native miracle (no coding) of the web service solution...
  
  The only case for the Oracle SOAP service is: when I use Oracle APEX, it works fine without the floating point operations. It seems that every customer non-Oracle will not take SOAP Oracle of XDB service...
  
  Issues related to the:
  1. someone else has real work situations using the native client NON-Oracle with Oracle XMLDB application web services?
  2. it is possible to configure the server HTTP of Oracle 10 G works with this native services?
  3. I missed any parameter on xdbconfig.xml so will not happen this kind of condemnation to death? (almost everything is by default except the HTTP PORT #)
  
  Suggestions and advise are greatly appreciated
  
  Published by: seanzh on March 17, 2011 10:28
  
  Published by: seanzh on March 17, 2011 10:29
  
  Published by: seanzh on March 17, 2011 10:31

  Oracle APEX doesn't use SOAP or SOAP provider... It uses EGP that is a completely different implementation, the fact that it works or fails is not relevant to the review of native database web services...

  1. someone else has real work situations using the native client NON-Oracle with Oracle XMLDB application web services?

  I wrote a number of applications that use controls of the browser XMLHTTP to call Soap Services... They have been tested with IE and FIREFOX. I also tested extensively with XMLSPY (Altova) SOAP Infrastructure...

  2. it is possible to configure the server HTTP of Oracle 10 G works with this native services?

  No native Web Services are part of the Oracle 11 g database.

  3. I missed any parameter on xdbconfig.xml so will not happen this kind of condemnation to death? (almost everything is by default except the HTTP PORT #)

  Is not sound as it assuming you can get a following WSDL URL

  http://NomServeur/orawsv? WSDL

  SOAP is based on HTTP, which is a stateless protocol, so the connections should not be opened once the request is completed...

  You have (or you can download a trial) of XMLSpy and test with this stack...

  Can check you for all shared servers errors reported in the alert.log, found the trace of the server directory

• Bug? Save fails after edited transformation - java closed connection error

  Hello

  I have a problem with the registration of ODM workflow after editing of node transformation.

  
  Processing node, I did transform change for the variable 'IMP_APPL_PA_EMP_STS_CD_REV_BIN' bin variable, sql code so what:

  case

  When ('IMP_APPL_PA_EMP_STS_CD_REV' in ('011', '040', '070', '080','090 ')) then 1

  When ('IMP_APPL_PA_EMP_STS_CD_REV' in ('012', '014', '030', '051', 990')) then 2

  When ('IMP_APPL_PA_EMP_STS_CD_REV' in ('010', '013', '050', '061', 100')) then 3

  When ('IMP_APPL_PA_EMP_STS_CD_REV' ('015', '020', '021', '022', '023',' 060')) then 4

  When ("IMP_APPL_PA_EMP_STS_CD_REV" is null) then 1

  3 other

  end

  Validation is going well, but after I press save I get the message:

  Cannot save TDW_RISK/Test/binn_test (java.sql.SQLRecoverableException: connection is closed).

  I tell myself that when I put shorter case example - when, sql

  case

  When ('IMP_APPL_PA_EMP_STS_CD_REV' in ('011', '040', '070', '080','090 ')) then 1

  When ('IMP_APPL_PA_EMP_STS_CD_REV' in ('012', '014', '030', '051', 990')) then 2

  When ('IMP_APPL_PA_EMP_STS_CD_REV' in ('010', '013','050 ')) then 3

  3 other

  end

  ewerything is ok. When I add one, two or more "channels" box when example: 061', '100' same mistake happen again.

  I'm trying to do with dif datasource in various workfolows, but nothing helped.

  I found workaround using SQLNode and it works it is not best but to use the transformation of other variables.

  Any idea why is this happenning? Restrictions in node SQL Developer to transform?

  System: SQL Developer Version 4.0.0.12, Database 11.2.0.2

  Kind regards

  Kreso

  Whatever it is, it seems that in SQL Developer 4.0.2 and minor data issue is resolved.

• Closing connection, statement and ResultSet

  Leaves a statement/ResultSet object not closed blocked same as leaving a connection cavities not object?
  Once it is built; connection, result set and statement objects are independent of each other? That means, is that a closure causes to close another?

  This question is answered in the Javadoc.

• So, how can I knowif and Windows Update has installed correctly. Because my computer closed connection or and I have to restart.

  Theres times that I am on my computer and I lose the connection and theres times I'm on facebook or a game. And I try to go up and down.  and stop it stops in the middle of a game or facebook. Sometimes it I see the line over and over again.

  Hi Jo AnnHerrera,.

  What browser do you use to play games?

  You can visit Windows update history to check the recently installed updates, failed.

  Check the update history to see what updates have been installed. Visit the below mentioned link.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  If you use Internet Explorer to play games, refer to the suggestions from this link.

  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246

  I hope this helps.

• OBI and OPE Exception data source connection permissions

  Hello
  
  When I use my Admin OBI and run the report sound all fine.
  The role of consumer BI has the read permission, so have my roles / custom.
  But when I open the report using a non-administrator user I get the error:
  
  oracle.xdo.XDOException: oracle.xdo.XDOException: oracle.xdo.XDOException: could not get data source connection for: myconnection123
  
  I gave access to the model data as well. but without success.

  through that you will get good understanding on these authentication approaches http://docs.oracle.com/cd/E15586_01/fusionapps.1111/e20837/T539768T526688.htm

  http://docs.Oracle.com/CD/E17904_01/bi.1111/e13880/T526682T526687.htm

• You sent me an email telling me there was a closed connection of CS5, but I can't find not (0217719404) Please tell me how to find this link?

  You sent me an email (0217719404) telling me you attached a link for download CS5 on my laptop but I can't find the link.  Please tell me how to get this link.

  Richard Wakefield

  [deleted private information]

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

• Uniform HTTP Timeout setting?

  Hi all
  I used HttpConnection for a few years and now I have a need to set the timeout for HTTP connections within 2 minutes. I searched in this forum and elsewhere and learned that I should use either ConnectionFactory, who has the ability to set a timeout, or can I use HttpConnection and the timer and interrupt the flow of HTTP.

  BUT - as far as I know, these two methods have varying results. HttpConnection/Timer methods and the ConnectionFactory seem to work differently in the OS 5, 6 and 7 appear to better work in simulators than devices physical (I tested on OS5 and OS7.1 BlackBerry).

  My best results occur when I use ConnectionFactory and has my timeout value, setTimeLimit(), and setConnectionTimeout(), and then I add a Timer to the same timeout value. The code checks the sufficient connectivity using getCoverageStatus() just before trying to open the HTTP connection. It seems to work well on OS5, 6 and 7 sims and on live devices for OS5 and OS7.1.

  I'm still having a problem. There are moments where nothing stops the connection before HTTP mark two minutes. This happens when I simulate bad reception, just as the connection starts. I simulate the threshold of reception by starting the connection and then placing the BlackBerry in one box to cut the front desk. Most of the time, the works of timeout. My timeout is set to 16 seconds. On a live device 5.0, the timeout takes more than 30 seconds (not what I want, but it says my code is to have an effect).

  But if I open the box for 30 seconds and check every 15 seconds with a quick glance, I had the timeout of 2 minutes and 40 seconds - much longer than the time limit of 2 minutes by default. I connect where it happens and the 02:40 delay occurs inside this section of code:

  ConnectionFactory myConFactory = new ConnectionFactory();
  myConFactory.setTimeLimit (myFactoryTimeout);
  myConFactory.setConnectionTimeout (myFactoryTimeout);
  ConnectionDescriptor myConDesc = myConFactory.getConnection (pURL);

  Ignorant if I emphasize connectivity incorrectly performing this test at all, my questions for the experts of the forum are:
  I'm doing something wrong, and is there anything else I can do to get a specific time frame in all cases?
  Is there an explanation for this failure of timeout?

  The code follows. I've slightly simplified. Thank you!

  Request code:

  public static String HttpGetResponseString (String pURL, int pConnectionTimeoutSeconds)
  throws IOException {UnanticipatedHttpResponseException}
  String myReturn = "";
  HttpConnection myConn = null;
  InputStream myInput = null;
  Timer connectionTimerConnect = null;
  long myConnectionTimeoutSeconds = pConnectionTimeoutSeconds * 1000;
  long myFactoryTimeout = myConnectionTimeoutSeconds;
      
  try {}
  If the internet is not available.
  If (! getIsCoverageSufficient())
  throw new UnanticipatedHttpResponseException ("no cover available");

  HttpTimerTask timerTaskConnect = new HttpTimerTask (null);
  connectionTimerConnect = new Timer();
  connectionTimerConnect.schedule (timerTaskConnect, myConnectionTimeoutSeconds); Kill demand after x seconds
          
  If (Constants.DEBUG_MODE)
  Prefs.getInstance () .writeErrorLog ("Start Timer:" + myConnectionTimeoutSeconds + "ms");

  Connection request
  ConnectionFactory myConFactory = new ConnectionFactory();
  myConFactory.setTimeLimit (myFactoryTimeout);
  myConFactory.setConnectionTimeout (myFactoryTimeout);
  ConnectionDescriptor myConDesc = myConFactory.getConnection (pURL);
  If (myConDesc is nothing)
  throw new Exception ("factory connections do not return a descriptor");

  If (timerTaskConnect.hasInterrupted ())
  throw new UnanticipatedHttpResponseException("Interrupted-Open");
          
  myConn = (HttpConnection) myConDesc.getConnection ();
          
  final int responseCode = myConn.getResponseCode ();
          
  If (timerTaskConnect.hasInterrupted ())
  throw new UnanticipatedHttpResponseException ("Interrupted-response code');

  If (responseCode! = HttpConnection.HTTP_OK) {}
  throw new UnanticipatedHttpResponseException ("Invalid ResponseCode:" + Integer.toString (responseCode));
  } else {}
  myInput = myConn.openInputStream ();
  ResponseData = new ubyte [] byte [10000];
  int length = 0;
  StringBuffer rawResponse = new StringBuffer();
              
  {While (-1! = (length = {myInput.read (responseData)))}
  rawResponse.append (new String (responseData, 0, length));
  If (timerTaskConnect.hasInterrupted ())
  throw new UnanticipatedHttpResponseException("Interrupted-Read");
  }
  myReturn = rawResponse.toString ();
  }

  } catch (Exception e) {}
  Prefs.getInstance () .writeErrorLog ("Exception:" + e.getMessage ());
  throw new UnanticipatedHttpResponseException (e.getMessage ());
          
  } {Finally
  If (connectionTimerConnect! = null)
  {
  connectionTimerConnect.cancel ();
  connectionTimerConnect = null;
  }
          
  try {}
  If (myInput! = null) {}
  myInput.close ();
  myInput = null;
  }

  } catch (Exception e) {}
           
  try {}
  If (myConn! = null) {}
  myConn.close ();
  myConn = null;
  }
  } catch (Exception e) {}
  Closed connection Exception
  }
  }
  Return myReturn;
  }

  The Timertask:

  SerializableAttribute public class HttpTimerTask extends TimerTask {}
  HttpConnection _myConn = null;
  Thread _myThread = null;
  Boolean _myHasInterrupted = false;
      
  public HttpTimerTask (HttpConnection myConn)
  {
  _myConn = myConn;
  _myThread = Thread.currentThread ();
  }
  public boolean hasInterrupted()
  {
  Return _myHasInterrupted;
  }
  public void run() {}
  String myErrorName = "HttpTimerTask:"; "
  try {}
  If (_myConn! = null)
  {
  _myConn.close ();
  _myConn = null;
  If (Constants.DEBUG_MODE)
  Prefs.getInstance () .writeErrorLog (myErrorName + "Closed connection");
  }
  If (_myThread! = null)
  {
  _myThread.interrupt ();
  _myHasInterrupted = true;
  If (Constants.DEBUG_MODE)
  Prefs.getInstance () .writeErrorLog (myErrorName + "Interrupts the thread");
  }
              
  } catch (IOException e) {}
  }
  }

  Ok.

  «... Add a second timer.

  It is probably more effective if you can get your first Timer to perform the two functions, i.e. giving him the connection when you have an and the code check to see if there is a connection of paving?  I'm always hesitant to start further discussions on a camera like the BB.

  Please let us know how you go, because your logic could provide a good model for others.

• How to 'unlock' push to listen (acceptAndOpen)

  Hi I have tried to find a way to do every morning and google on this topic without finding a good answer.

  I have an application that continuously listening one pushes a bes server. Now, I need to change to listen pushes for a period of time. After this time, I have to stop listening (and treat the push messages but it's not the case.)

  Set a time-out seems to work only when a connection is already open, so it's not help.

  Finally, I tried to run a Thread just before the call to 'acceptAndOpen '. This Thread waits for a while and if nothing is received then it try to call to 'close' the connection, but all I get is a "Invalid PDAP queue state" in the Simulator. I provide the part of the code for more details.

  StreamConnection stream = null;InputStream input = null;MDSPushInputStream pushInputStream = null;
  
  [...]
  
  while (!stop) {    try {    
  
          [...]
  
          synchronized (this) {
  
  //                    scn = (StreamConnectionNotifier) Connector.open(URL + ";ConnectionTimeout=30000;deviceside=false",Connector.READ,true);            ConnectionFactory connFact = new ConnectionFactory();            ConnectionDescriptor connDesc = connFact.getConnection(URL + ";deviceside=false");            connFact.setConnectionTimeout(30000);            scn = (StreamConnectionNotifier) connDesc.getConnection();        }
  
          AccepConnectionTimeout thread = null;        while (!stop) {            try {                // NOTE: the following will block until data is received.                thread = new AccepConnectionTimeout(scn);                thread.start();                stream = scn.acceptAndOpen();            } catch (InterruptedIOException  iioe) {                Log.error(ERR_TAG + "Timeout waiting connection:" + iioe.getMessage());                scn.close();                scn = null;                // TODO do something here                continue;            }
  
              timestampUltimaRecepcion = System.currentTimeMillis();
  
  [...]
  
  public class AccepConnectionTimeout extends Thread {public boolean stop = false;public StreamConnectionNotifier scn = null;
  
  public AccepConnectionTimeout(StreamConnectionNotifier scn) {    this.scn = scn;}
  
  public void run() {    try {        Thread.sleep(30000);    } catch (Exception e) {        Log.error(ERR_TAG + "Error waiting for accept timeout");    }    if (!stop) {        try {            scn.close();        } catch (IOException ioe) {            Log.error(ERR_TAG + "Error closing connection after accept timeout:" + ioe.getMessage());        } catch (Exception e) {            Log.error(ERR_TAG + "(Exception)Error closing connection after accept timeout:" + e.getMessage());        }    }}
  
  [...]
  

  (NOTE: I only ran this in a simulator)

  I can't find much information on this 'mistake' and also my main goal is to achieve the objective referred to in the second subparagraph. Could you help me somehow? How to do this? How to solve it? examples?

  I'm not sure that understand your condition.

  Normally what you would do if have an earpiece for push messages, and whenever a message is received, it starts a new Thread and pass the received data.  So I don't understand the problem with this:

  "After this time I have to stop listening (and treat the push messages.

  Adoption of the approach to treatment that I mentioned will ensure that pushed messages are processed as they are received, which seems the right thing to do.

  As do you this, then I think that the obligation to stop the listener disappears.

  Sorry I don't have any comment on your post, just this part of your application design.

• AP cannot participate. DTLS connection closed by controller

  Hi guys,.

  1140 aPs no record with the 5508 controller. Here are some results of debugging:

  IP access point: 100,31

  WLC IP:100.2

  activate debugging capwap events

  * spamApTask1: 11:25:04.958 Nov 01: Discovery 30:e4:db:d3:a4:ca request 192.168.100.31:47690

  * spamApTask1: 11:25:04.958 Nov 01: 30:e4:db:d3:a4:ca join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 100, joined Aps = 0

  * spamApTask1: 11:25:04.958 Nov 01: Discovery 30:e4:db:d3:a4:ca response to 192.168.100.31:47690

  * spamApTask1: 11:25:04.958 Nov 01: Discovery 30:e4:db:d3:a4:ca response to 192.168.100.31:47690

  * spamApTask1: 11:25:14.959 Nov 01: DTLS 30:e4:db:d3:a4:ca not found, creating new connection connection for 192:168:100:31 (47690) 192:168:100:2 (5246)

  * spamApTask1: 11:25:15.101 Nov 01: DTLS closed connection events receivedserver 30:e4:db:d3:a4:ca (192:168:100:2 / 5246) client (192:168:100:31 / 47690)

  * spamApTask1: Nov 01 11:25:15.101: 30:e4:db:d3:a4:ca no entry there for AP (192:168:100:31 / 47690)

  * spamApTask1: 11:25:15.101 Nov 01: 30:e4:db:d3:a4:ca entry no. AP exist in the temporary database for 192.168.100.31:47690

  **************************************************************

  turn debugging capwap package

  > * spamApTask1: Nov 01 11:36:20.039: <  start="" of="" capwap="" packet ="">>

  * spamApTask1: 11:36:20.039 01 Nov: mesg 192.168.100.31 Recd, Port 47690 CAPWAP control

  * spamApTask1: 11:36:20.039 Nov 01: 4, HLEN, Radio ID 0, WBID 1

  * spamApTask1: 11:36:20.039 Nov 01: Msg Type: CAPWAP_DISCOVERY_REQUEST

  * spamApTask1: 11:36:20.039 Nov 01: Msg length: 73

  * spamApTask1: 11:36:20.039 Nov 01: Msg SeqNum: 0

  * spamApTask1: 11:36:20.039 01 Nov:

  * spamApTask1: Nov 01 11:36:20.039: Type: CAPWAP_MSGELE_DISCOVERY_TYPE, length 1

  * spamApTask1: 11:36:20.039 Nov 01: Type of discovery: CAPWAP_DISCOVERY_TYPE_UNKNOWN

  * spamApTask1: 11:36:20.039 01 Nov:

  * spamApTask1: Nov 01 11:36:20.039: Type: CAPWAP_MSGELE_WTP_DESCRIPTOR, length 40

  * spamApTask1: 11:36:20.039 Nov 01: X-rays taken Maximum supported: 0

  * spamApTask1: 11:36:20.039 Nov 01: Radios in use: 0

  * spamApTask1: 11:36:20.039 Nov 01: encryption features: 0x00 0x01

  * spamApTask1: 11:36:20.039 01 Nov:

  * spamApTask1: Nov 01 11:36:20.039: Type: CAPWAP_MSGELE_WTP_FRAME_TUNNEL, length 1

  * spamApTask1: 11:36:20.039 Nov 01: Mode of raster WTP Tunnel: NATIVE_FRAME_TUNNEL_MODE

  * spamApTask1: 11:36:20.039 01 Nov:

  * spamApTask1: Nov 01 11:36:20.039: Type: CAPWAP_MSGELE_WTP_MAC_TYPE, length 1

  * spamApTask1: 11:36:20.039 Nov 01: WTP Mac Type: SPLIT_MAC

  * spamApTask1: 11:36:20.039 01 Nov:

  * spamApTask1: Nov 01 11:36:20.039: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 10

  * spamApTask1: 11:36:20.039 Nov 01: identifier of the seller: 0 x 00409600

  * spamApTask1: 11:36:20.039 01 Nov:

  IE: UNKNOWN IT IS 207

  * spamApTask1: Nov 01 11:36:20.039: IE length: 4

  * spamApTask1: 11:36:20.039 Nov 01: decode the routine unavailable, Hex Dump printing

  * spamApTask1: 11:36:20.039 Nov 01: 00000000: 01 00 00 01...

  * spamApTask1: Nov 01 11:36:20.039: <  end="" of="" capwap="" packet ="">>

  **************************************************************

  turn debugging capwap errors

  * spamApTask1: 11:45:15.244 Nov 01: 30:e4:db:d3:a4:ca abolition PT 192.168.100.31 which has not been surveyed

  * spamApTask1: 11:45:15.245 Nov 01: 30:e4:db:d3:a4:ca DTLS connection has been closed

  **************************************************************

  turn debugging capwap detail

  * spamApTask1: 11:52:45.298 Nov 01: 30:e4:db:d3:a4:ca CAPWAP control received Msg to 192.168.100.31:47690

  * spamApTask1: 11:52:45.298 Nov 01: DTLS 30:e4:db:d3:a4:ca 0x1454bc38 connection closed by controller

  * spamApTask1: 11:52:45.299 Nov 01: msg closed connection CAPWAP DTLS

  Check your time on the wlc. There offshore so that's why the AP ate only joined do not.

  Sent from my iPhone

• AMT-12537: TNS:connection closed

  Dear all,
  
  I need your suggestion on error below. I installed Oracle DB on OEL 6.3. While creating (using netca) and from listener, I am getting error, below
  
  *[Oracle@test bin] $. / netca *.
  Oracle Net Services Configuration:
  Listening port configuration: OTM63DB
  Configuring the complete listener.
  Starting Oracle Net Listener:
  Listener control running:
  /Data/app/Oracle/product/11.2.0/dbhome_1/bin/lsnrctl start OTM63DB
  Listener complete control.
  Receiver starts has failed.
  Configuring Oracle Net Services successfully. The exit code is 0
  
  *[Oracle@test bin] $ lsnrctl start OTM63DB *.
  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 27 April 2013 19:18:06
  Copyright (c) 1991, 2009, Oracle. All rights reserved.
  From /data/app/oracle/product/11.2.0/dbhome_1/bin/tnslsnr: Please wait...
  AMT-12537: TNS:connection closed
  AMT-12560: TNS:protocol adapter error
  AMT-00507: closed connection
  Linux error: 29: illegal seek
  
  Please help me solve the error below.
  
  Thank you

  Check your file/etc/hosts and include

  + 127.0.0.1 localhost.localdomain localhost +.

  If missing.

  As much as I KNOW Oracle 11.2.0.1.0 is not certified for OEL 6.3

  Kind regards
  Valerie

• Received ERROR exception creating connection to pool "HRConn":

  Hello
  
  When I download the application in the development of rich Web Applications with Oracle ADF, and then try to run this application I had under Journal, my JDeveloper Version is 11.1.2.1.0
  

  10:54:23 AM] Deploying Application...
  <Jun 28, 2012 10:54:30 AM AST> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "HRConn": IO Error: The Network Adapter could not establish the connection> 
  <Jun 28, 2012 10:54:31 AM AST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1340870064764' for task '0'. Error is: 'weblogic.application.ModuleException: '
  weblogic.application.ModuleException: 
       at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
       at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
       at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
       at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
       at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
       Truncated. see log file for complete stacktrace
  Caused By: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: IO Error: The Network Adapter could not establish the >connection
       at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:276)
       at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1249)
       at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1166)
       at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:249)
       at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1154)
       Truncated. see log file for complete stacktrace
  
  <Jun 28, 2012 10:54:31 AM AST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'HRSystem'.> 
  <Jun 28, 2012 10:54:31 AM AST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
  weblogic.application.ModuleException: 
       at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
       at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
       at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
       at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
       at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
       Truncated. see log file for complete stacktrace
  Caused By: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: IO Error: The Network Adapter could not establish the >connection
       at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:276)
       at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1249)
       at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1166)
       at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:249)
       at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1154)
       Truncated. see log file for complete stacktrace
  
  [10:54:31 AM] Deployment cancelled.
  [10:54:31 AM] ----  Deployment incomplete  ----.
  [10:54:31 AM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
  #### Cannot run application HRSystem due to error deploying to IntegratedWebLogicServer.
  [Application HRSystem stopped and undeployed from Server Instance IntegratedWebLogicServer]

  Please help,

  Hello

  Could not create connection pool. With the exception of the DBMS driver: IO error: the network adapter could not establish the > connection

  His free explationary...
  Check the connection settings in the Application-> connections resources...

• Connection closed error

  Hi in ODI I get following error frequently.
  
  com.sunopsis.dwg.SQLWorkReposException: closing connection
  at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
  at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:199)
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:263)
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:271)
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:445)
  at oracle.jdbc.driver.PhysicalConnection.prepareStatement(PhysicalConnection.java:3127)
  at oracle.jdbc.driver.PhysicalConnection.prepareStatement(PhysicalConnection.java:3042)
  at sun.reflect.GeneratedMethodAccessor64.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at oracle.ucp.jdbc.proxy.JDBCConnectionProxyFactory.invoke(JDBCConnectionProxyFactory.java:244)
  to $Proxy1.prepareStatement (Unknown Source)
  at sun.reflect.GeneratedMethodAccessor64.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  to oracle.odi.core.datasource.support.RuntimeClassLoaderDataSourceCreator$ ConnectionInvocationHandler.invoke (RuntimeClassLoaderDataSourceCreator.java:104)
  to $Proxy2.prepareStatement (Unknown Source)
  at com.sunopsis.sql.SnpsQuery.getPreparedStatement(SnpsQuery.java:977)
  at com.sunopsis.sql.SnpsQuery.getPreparedStatement(SnpsQuery.java:1018)
  at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java:1872)
  at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java:554)
  at com.sunopsis.dwg.dbobj.generated.GeneratedSnpLockedObject.getObjectLst(GeneratedSnpLockedObject.java:368)
  at oracle.odi.ui.OdiDisconnectController.performDisconnect(OdiDisconnectController.java:163)
  to oracle.odi.ui.OdiAddin$ 8.canShutdown(OdiAddin.java:505)
  at oracle.ide.cmd.ExitCommand.canShutdown(ExitCommand.java:181)
  at oracle.ide.cmd.ExitCommand.doit(ExitCommand.java:357)
  at oracle.ide.controller.CommandProcessor.invoke(CommandProcessor.java:317)
  at oracle.ide.IdeCore.quit(IdeCore.java:785)
  at oracle.ide.Ide.quit(Ide.java:604)
  to oracle.ideimpl.MainWindowImpl$ 5.windowClosing(MainWindowImpl.java:380)
  at java.awt.AWTEventMulticaster.windowClosing(AWTEventMulticaster.java:332)
  at java.awt.AWTEventMulticaster.windowClosing(AWTEventMulticaster.java:332)
  at java.awt.AWTEventMulticaster.windowClosing(AWTEventMulticaster.java:332)
  at java.awt.Window.processWindowEvent(Window.java:1865)
  at javax.swing.JFrame.processWindowEvent(JFrame.java:274)
  at java.awt.Window.processEvent(Window.java:1823)
  at java.awt.Component.dispatchEventImpl(Component.java:4630)
  at java.awt.Container.dispatchEventImpl(Container.java:2099)
  at java.awt.Window.dispatchEventImpl(Window.java:2478)
  at java.awt.Component.dispatchEvent(Component.java:4460)
  at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
  at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
  
  What would be the reason for this?
  And how it can be prevented?

  I have experienced this problem with executing scenarios in asynchronous mode when the source and target are in the same database.

  I have 4 layers - landing (table source as-is), directing (only the columns, I need to ask), integration (transformations based on the staging), Dimensions (creation of dimensions and fact tables).

  I came across this particular question to ask to stage, where it seems that landing packages are not close the connection in time for packets of staging pick up of the resource.

  There are a few things you can try:
  Set the initial and maximum connections in the connection pool of weblogic for the ODI master repository. I found this helps a little but always causes problem when loading large tables. Change is possible via the console in weblogic (port default 7003) ODI-> navigate to Services-> Data Sources, select the ODI Master repository, then click on the tab Connection Pool - update of the initial capacity and capacity-> Lock & Edit then activate/register the changes.

  Or - what I found works without problem is:
  Make all synchronous in the parcel scenarios or just interfaces in the package instead of the scenarios (as they always run in the series).

  See you soon
  coolhand_luke