Connection closed error

Similar Questions

• Email - connection closed gracefully

  Having just opened an Outlook account a week due to problems with another provider, I start to wonder if I made a sensible thing. I look at my emails via an email client.

  Friday I sent a lot of mails from outlook and everything worked fine. Today, having changed anything I can no longer send emails even though I can get them. (I can send via gmail).

  [ERROR] - an error has occurred. Account: ' pop - mail.outlook.com ', Protocol: "SMTP", task: SMTP send all messages, Server: ' smtp - mail.outlook.com ", Port: 587, TLS: no (1.0), error code: 0, error message: 'connection closed gracefully.", the last response from the server: "" for more details look in the "Log" tab - error messages are marked in red.

  <- 550="" 5.3.4="" 554-554="" 5.2.0="" storedrv.deliver;="" delivery="" result="">

  -> RSET

  An error has occurred. -Connection closed gracefully.

  This problem was solved when about 30 minutes after I posted the question and one hour after the problem began, I received an email from saying that, if I wanted to send Outlook messages, I needed to check my account by copying the number of letters at the end of the email. I did and it worked since!

• AP cannot participate. DTLS connection closed by controller

  Hi guys,.

  1140 aPs no record with the 5508 controller. Here are some results of debugging:

  IP access point: 100,31

  WLC IP:100.2

  activate debugging capwap events

  * spamApTask1: 11:25:04.958 Nov 01: Discovery 30:e4:db:d3:a4:ca request 192.168.100.31:47690

  * spamApTask1: 11:25:04.958 Nov 01: 30:e4:db:d3:a4:ca join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 100, joined Aps = 0

  * spamApTask1: 11:25:04.958 Nov 01: Discovery 30:e4:db:d3:a4:ca response to 192.168.100.31:47690

  * spamApTask1: 11:25:04.958 Nov 01: Discovery 30:e4:db:d3:a4:ca response to 192.168.100.31:47690

  * spamApTask1: 11:25:14.959 Nov 01: DTLS 30:e4:db:d3:a4:ca not found, creating new connection connection for 192:168:100:31 (47690) 192:168:100:2 (5246)

  * spamApTask1: 11:25:15.101 Nov 01: DTLS closed connection events receivedserver 30:e4:db:d3:a4:ca (192:168:100:2 / 5246) client (192:168:100:31 / 47690)

  * spamApTask1: Nov 01 11:25:15.101: 30:e4:db:d3:a4:ca no entry there for AP (192:168:100:31 / 47690)

  * spamApTask1: 11:25:15.101 Nov 01: 30:e4:db:d3:a4:ca entry no. AP exist in the temporary database for 192.168.100.31:47690

  **************************************************************

  turn debugging capwap package

  > * spamApTask1: Nov 01 11:36:20.039: <  start="" of="" capwap="" packet ="">>

  * spamApTask1: 11:36:20.039 01 Nov: mesg 192.168.100.31 Recd, Port 47690 CAPWAP control

  * spamApTask1: 11:36:20.039 Nov 01: 4, HLEN, Radio ID 0, WBID 1

  * spamApTask1: 11:36:20.039 Nov 01: Msg Type: CAPWAP_DISCOVERY_REQUEST

  * spamApTask1: 11:36:20.039 Nov 01: Msg length: 73

  * spamApTask1: 11:36:20.039 Nov 01: Msg SeqNum: 0

  * spamApTask1: 11:36:20.039 01 Nov:

  * spamApTask1: Nov 01 11:36:20.039: Type: CAPWAP_MSGELE_DISCOVERY_TYPE, length 1

  * spamApTask1: 11:36:20.039 Nov 01: Type of discovery: CAPWAP_DISCOVERY_TYPE_UNKNOWN

  * spamApTask1: 11:36:20.039 01 Nov:

  * spamApTask1: Nov 01 11:36:20.039: Type: CAPWAP_MSGELE_WTP_DESCRIPTOR, length 40

  * spamApTask1: 11:36:20.039 Nov 01: X-rays taken Maximum supported: 0

  * spamApTask1: 11:36:20.039 Nov 01: Radios in use: 0

  * spamApTask1: 11:36:20.039 Nov 01: encryption features: 0x00 0x01

  * spamApTask1: 11:36:20.039 01 Nov:

  * spamApTask1: Nov 01 11:36:20.039: Type: CAPWAP_MSGELE_WTP_FRAME_TUNNEL, length 1

  * spamApTask1: 11:36:20.039 Nov 01: Mode of raster WTP Tunnel: NATIVE_FRAME_TUNNEL_MODE

  * spamApTask1: 11:36:20.039 01 Nov:

  * spamApTask1: Nov 01 11:36:20.039: Type: CAPWAP_MSGELE_WTP_MAC_TYPE, length 1

  * spamApTask1: 11:36:20.039 Nov 01: WTP Mac Type: SPLIT_MAC

  * spamApTask1: 11:36:20.039 01 Nov:

  * spamApTask1: Nov 01 11:36:20.039: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 10

  * spamApTask1: 11:36:20.039 Nov 01: identifier of the seller: 0 x 00409600

  * spamApTask1: 11:36:20.039 01 Nov:

  IE: UNKNOWN IT IS 207

  * spamApTask1: Nov 01 11:36:20.039: IE length: 4

  * spamApTask1: 11:36:20.039 Nov 01: decode the routine unavailable, Hex Dump printing

  * spamApTask1: 11:36:20.039 Nov 01: 00000000: 01 00 00 01...

  * spamApTask1: Nov 01 11:36:20.039: <  end="" of="" capwap="" packet ="">>

  **************************************************************

  turn debugging capwap errors

  * spamApTask1: 11:45:15.244 Nov 01: 30:e4:db:d3:a4:ca abolition PT 192.168.100.31 which has not been surveyed

  * spamApTask1: 11:45:15.245 Nov 01: 30:e4:db:d3:a4:ca DTLS connection has been closed

  **************************************************************

  turn debugging capwap detail

  * spamApTask1: 11:52:45.298 Nov 01: 30:e4:db:d3:a4:ca CAPWAP control received Msg to 192.168.100.31:47690

  * spamApTask1: 11:52:45.298 Nov 01: DTLS 30:e4:db:d3:a4:ca 0x1454bc38 connection closed by controller

  * spamApTask1: 11:52:45.299 Nov 01: msg closed connection CAPWAP DTLS

  Check your time on the wlc. There offshore so that's why the AP ate only joined do not.

  Sent from my iPhone

• AMT-12537: TNS:connection closed

  Dear all,
  
  I need your suggestion on error below. I installed Oracle DB on OEL 6.3. While creating (using netca) and from listener, I am getting error, below
  
  *[Oracle@test bin] $. / netca *.
  Oracle Net Services Configuration:
  Listening port configuration: OTM63DB
  Configuring the complete listener.
  Starting Oracle Net Listener:
  Listener control running:
  /Data/app/Oracle/product/11.2.0/dbhome_1/bin/lsnrctl start OTM63DB
  Listener complete control.
  Receiver starts has failed.
  Configuring Oracle Net Services successfully. The exit code is 0
  
  *[Oracle@test bin] $ lsnrctl start OTM63DB *.
  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 27 April 2013 19:18:06
  Copyright (c) 1991, 2009, Oracle. All rights reserved.
  From /data/app/oracle/product/11.2.0/dbhome_1/bin/tnslsnr: Please wait...
  AMT-12537: TNS:connection closed
  AMT-12560: TNS:protocol adapter error
  AMT-00507: closed connection
  Linux error: 29: illegal seek
  
  Please help me solve the error below.
  
  Thank you

  Check your file/etc/hosts and include

  + 127.0.0.1 localhost.localdomain localhost +.

  If missing.

  As much as I KNOW Oracle 11.2.0.1.0 is not certified for OEL 6.3

  Kind regards
  Valerie

• ORA-12537: TNS:connection closed

  Hello
  
  Please help me solve this problem: when I try to access my testdb, I get the following error:
  
  [oracle@RedHatU5 admin] $ sqlplus adi/adi@testdb
  
  SQL * more: version 11.1.0.6.0 - Production on Mon Mar 21 13:40:28 2011
  
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  
  ERROR:
  ORA-12537: TNS:connection closed
  
  Please find below some symptoms:
  
  I created the following files manually in $ORACLe_HOME/network/admin, as below:
  
  #sqlnet.ora #.
  
  NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)
  + #SQLNET.expire_time = 0 +.
  + #TCP.validnode_checking = YES +.
  TCP.invited_nodes = (x.x.x.x)
  
  #tnsnames.ora #.
  
  brmtest =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (Host = RedHatU5)(Port = 1521))
  )
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = testdb)
  )
  )
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1)))
  (CONNECT_DATA =
  (SID = TestDB)))
  
  
  Default listener works correctly:
  
  [oracle@RedHatU5 admin] $ lsnrctl status
  
  LSNRCTL for Linux: Version 11.1.0.6.0 - Production on March 21, 2011 13:26:40
  
  Copyright (c) 1991, 2007, Oracle.  All rights reserved.
  
  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for Linux: Version 11.1.0.6.0 - Production
  Beginning of March 21, 2011 12:59:07
  Uptime 0 days 0 h 27 min 33 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  The listener log file /Orabrm/app/Oracle/diag/tnslsnr/RedHatU5/listener/alert/log.XML
  Summary of endpoints listening...
  + (Description = (Address = (Protocol = TCP)(Host=RedHatU5) (port = 1521))) +.
  + (Description = (Address = (Protocol = IPC) (Key = EXTPROC))) +.
  Summary of services...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  "Testdb" service has 2 occurrences.
  Instance "testdb", status UNKNOWN, has 1 operation for this service...
  Instance "testdb", State LOAN, has 1 operation for this service...
  Service 'testdbXDB' has 1 instance (s).
  Instance "testdb", State LOAN, has 1 operation for this service...
  Service 'testdb_XPT' has 1 instance (s).
  Instance "testdb", State LOAN, has 1 operation for this service...
  The command completed successfully
  
  [oracle@RedHatU5 admin] $ tnsping testdb
  
  AMT Ping utility for Linux: Version 11.1.0.6.0 - Production on March 21, 2011 13:34:09
  
  Copyright (c) 1997, 2007, Oracle.  All rights reserved.
  
  Use settings files:
  +/orabrm/app/Oracle/product/11.1.0/Db_1/network/admin/SQLNET.ora+
  
  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (Host = RedHatU5)(Port = 1521))) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = testdb)))
  OK (0 msec)
  
  [oracle@RedHatU5 admin] $ sqlplus adi/adi@//RedHatU5:1521/testdb
  
  SQL * more: version 11.1.0.6.0 - Production on Mon Mar 21 13:35:49 2011
  
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  
  ERROR:
  ORA-12537: TNS:connection closed
  
  SQL > connect adi@testdb
  Enter the password:
  ERROR:
  ORA-12537: TNS:connection closed
  
  
  
  WARNING: You are more connected to ORACLE.
  
  Please help me understand what's wrong in my setup
  
  Thank you
  Adrian
  
  Published by: user12908554 on March 21, 2011 04:56

  Refer to this note

  http://forums.Oracle.com/forums/thread.jspa?threadID=1002617

• I can't connect to certain things (connection refused error)

  Hello

  recently I am experiencing an error where my mac does not connect to certain things, to make an example and explain

  -I can't open the web page of google

  -I can't open another page Web (connection refused error)

  -I can't open steam but downloads don't work and so used to the store

  I had this problem once before, but a call for assistance from apple and everything worked again.

  I would like to know what causes this problem and how to solve this problem, so I can't call assistance all the time

  Thank you

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  The first three are clearly not VSearch files because the names match either of the above models. The last two are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these legitimate files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Version with ControlLogix - link cRIO (implicit messaging), "(Code 16 #0315) problem" connection request error: invalid segment type ""

  I have developed and delivered a system in Germany several years ago.  He worked then.  But the cRIO was damaged and replaced by a newer model, and does not now.  I suspect (and Support technical OR agree) it's a problem of software version, which could be solved with the NOT-MAX Software Installer.  But I do not have access to the system myself, and correspondence is slow and tedious.

  The original system was a cRIO-9073, developed with LabView 2009.  He used the implicit Messaging.  The ID of Instance, sizes, IP addresses, etc everything has worked very well.

  The current system is a cRIO-9074, with LabView DURATION 14.0 (I guess that LV 2014), Scan Engine 4.3, NI - Industrial Communications for Ethernet/IP 14.0.0, etc.  Programs FPGA and processor are responsible and seem to work in the cRIO.  The "EthernetIP Set Assembly Instance Data.vi' will return no error.  But the PLC just pointing out "(Code 16 #0315)" connection request error: invalid segment type "."  We looked at intellectual property (the mistake was different), sizes and body #s.

  The PLC doesn't have to all be modified.

  Anyone know if there is no problem of compatibility with LV-2014 and Ethernet/IP 14.0.0?  Or if there are all the other required packages?

  I am including the NOT-Max reports.

  Hi ZX81

  To help you 2009 application to work with the new cRIO, you must deploy it to the device. You must in order to deploy the cRIO, make sure it has the same versions of software that you used with the old cRIO.

  You can format the cRIO NI MAX and deploy the application of LV, 2009. However, if you do not have access to the cRIO or your client does not have the necessary software, you can deploy the application in another cRIO with software (cRIO same model and same modules as your client) and create a picture of it and send it to your customer so that it can deploy the cRIO even without the software on his computer. The following document explains how to do this.

  Utility of RAD

  WenR

• Microsoft connection and error code 80072EFD and kb2656353, kb2656370

  Having prolems connecting to microsoft Server error code 80072EFD and kb2656353, suggestions kb2656370

  Hello

  1 did you change on your computer before this problem?

  2. What Service Pack in installed on your computer?

  3. you receive an error message?

  You can read the article and then check.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941

  See also:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  http://support.Microsoft.com/kb/906602

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• I did a system restore and now I can not connect. Error code oxc004e002.

  I ran the restoration of the system and now unable to connect. Error code oxc004e002 AAn arrives. McAfee also keeps poping up saying that I am not protected

  Hi Rita Morgan,.

  1. on what application you can not connect?

  2. When you mention "sign in" mean, you are not able to boot to the desktop?

  3. have you updated your McAfee security software?

  Make sure that it is not expired and updated your McAfee software up-to-date.

  Follow the steps below and check, if it helps.

  Step 1:

  Start your computer in safe mode with network and check if that helps to connect.

  Step 2:

  This problem can also be caused by a malware, I you have to perform a full scan in safe mode with network in order to remove the malicious software and since then, your McAfee does not protect your machine, I would have you to run a scan using the link below.

  http://OneCare.live.com/site/en-us/default.htm

  In addition, check out the link below and check if it is related to your issue.

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/b7e31d29-801B-4AFA-932e-46572344476a

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Connection on error curve 9320 times

  Hello

  My smart phone BlackBerry curve 9320 got a vodaphone SIM, wifi is enabled. But when I try to establish an http connection, it is showing "connection timeout error. The connection works fine in the Simulator.

  s = Connector.open(reqStr+";deviceside=true;interface=wifi",Connector.READ_WRITE) (StreamConnection);
  httpConn s = (HttpConnection);

  If I do not add the parameter = wifi interface, then it displays "wifi not accessible to the general public".

  The browser of the unit works fine.

  Help, please.

  Before you start to look at this problem, I wonder if you are aware of all possibilities about the methods that applications can connect?  I recommend you to consider at least these two things:

  http://supportforums.BlackBerry.com/T5/Java-development/networking-transports-II/Ta-p/446742

  http://supportforums.BlackBerry.com/T5/Java-development/different-ways-to-make-an-HTTP-or-socket-con...

  If this is all familiar, then you have to determine what method you will use to connect.  Assuming you are trying to develop on OS 5.0 and above then you could use the ConnectionFactory or develop your own method to choose the connection.  Both work very well, but there are a number of Threads that talk about problems of connection with these.  I recommend you search around to find tips, you should find everything you need already in discussions in the forum.  .

• net.rim.device.api.io.ConnectionClosedException: Connection closed

  Hello

  I'm "net.rim.device.api.io.ConnectionClosedException: Connection closed" exception so that he was trying to get the response code in the following code snippet. What will be the reason for this exception: -.

  HttpConnection connection=(HttpConnection)Connector.open(url);
          System.out.println("Post-----------------------1");
          connection.setRequestMethod(HttpConnection.POST);
          System.out.println("Post-----------------------2");
          connection.setRequestProperty("Content-Type",aRequest.getContentType());
          System.out.println("Post-----------------------3");
          Hashtable header=aRequest.getHeader();
          if(header!=null)
          {
              Enumeration enumeration =header.keys();
              while(enumeration.hasMoreElements())
              {
                  String headerStr=(String)enumeration.nextElement();
                  String headerValue=(String)header.get(headerStr);
                  //System.out.println("header:"+headerStr+"headerval::"+headerValue);
                  connection.setRequestProperty(headerStr,headerValue);
              }
          }
          System.out.println("Post-----------------------4");
          OutputStream postRequestOutputStream=connection.openOutputStream();
          System.out.println("Post-----------------------4#########");
          postRequestOutputStream.write(aRequest.getPostData());
          System.out.println("Post-----------------------4%%%%%%%");
          postRequestOutputStream.close();
          System.out.println("Post-----------------------5");
          System.out.println("RES CODE:"+connection.getResponseCode());
          InputStream is=connection.openInputStream();
  

  Try opening the InputStream before getResponseCode().

  concerning

• ORA-12518: TNS:listener could not hand off client connection (DBD ERROR: OCIServerAttach)

  Hi again,

  I'm on my business management console and the database Instance and the headset shows the green arrow, but the connection of the Agent of the Forum shows a red arrow down and the error:

  Status: failed

  Details: ORA-12518: TNS:listener could not hand off client connection (DBD ERROR: OCIServerAttach)

  My OraClrAgnt service is up and running (using winxp pro, oracle 11 g 2), I'm on my pc at home, all my ports are open (name of my machine's "abigail" and it's dmzhost)

  Any suggestions to solve this error?

  My Tnsnames ora file:

  ABIGAIL =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = ABIGAIL)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl.0.0.10)

  )

  )

  LISTENER_ORCL =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = ABIGAIL)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SID = ORCL)

  )

  )

  RMAN =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = ABIGAIL)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = rman.abigail)

  )

  )

  My listener.ora

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = CLRExtProc)

  (ORACLE_HOME = E:\app\abigail\product\11.2.0\dbhome_1)

  (= Extproc PROGRAM)

  (ENVS = "EXTPROC_DLLS=ONLY:E:\app\abigail\product\11.2.0\dbhome_1\bin\oraclr11.dll")

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = ABIGAIL)(PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = E:\app\abigail

  My SQLNET. ORA

  SQLNET. AUTHENTICATION_SERVICES = (NTS)

  NAMES. DIRECTORY_PATH = (EZCONNECT, TNSNAMES, LOCALHOST)

  NAMES. TRACE_LEVEL = ADMIN

  My alert file

  < time msg = "2013-10 - T 10, 20: 47:02.687 - 04:00 ' org_id = 'oracle' id_comp = 'tnslsnr'"

  type = 'UNKNOWN' level = '16' = host_id "ABIGAIL."

  host_addr =': 1' >

  < txt > 10 October 2013 20:47:01 * (CONNECT_DATA = (CID = (PROGRAM =)(HOST=__jdbc__) (USER = SYSTEM)) (SERVICE_NAME = orcl.0.0.10)) * (ADDRESS = (PROTOCOL = tcp (PORT = 38289))(HOST=127.0.0.1)) * establish * orcl.0.0.10 * 12518

  < / txt >

  < / msg >

  < time msg = "2013-10 - T 10, 20: 47:02.687 - 04:00 ' org_id = 'oracle' id_comp = 'tnslsnr'"

  type = 'UNKNOWN' level = '16' = host_id "ABIGAIL."

  host_addr =': 1' >

  < txt > TNS-12518: TNS:listener could not hand off client connection

  AMT-12560: TNS:protocol adapter error

  < / txt >

  < / msg >

  My listener status and services

  LSNRCTL > status

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Prod

  ction

  Start date October 10, 2013 22:47:58

  Uptime 0 days 0 h 2 min 1 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Listener parameter File E:\app\abigail\product\11.2.0\dbhome_1\network\admin\l

  istener.ora

  E:\app\abigail\diag\tnslsnr\ABIGAIL\listener\ale log listener

  rt\log. XML

  Summary of endpoints listening...

  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=ABIGAIL) (PORT = 1521)))

  Summary of services...

  Service 'CLRExtProc' has 1 instance (s).

  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...

  Service 'orcl.0.0.10' has 1 instance (s).

  Instance "orcl", State LOAN, has 8 managers of this service...

  The command completed successfully

  LSNRCTL > services

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))

  Summary of services...

  Service 'CLRExtProc' has 1 instance (s).

  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...

  Managers:

  "DEDICATED" set up: 0 denied: 0

  LOCAL SERVER

  Service 'orcl.0.0.10' has 1 instance (s).

  Instance "orcl", State LOAN, has 8 managers of this service...

  Managers:

  "D006" put in place: 0 denied: current: 0 0 max: 800 status: loan

  DISPATCHER < machine: ABIGAIL, pid: 1312 >

  (ADDRESS = (PROTOCOL =)(HOST=ABIGAIL) (PORT = 1060) CST)

  "D005" put in place: 0 denied: 12 current: 0 max: 800 status: ready

  DISPATCHER < machine: ABIGAIL, pid: 1288 >

  (ADDRESS = (PROTOCOL =)(HOST=ABIGAIL) (PORT = 1061) CST)

  "D004" put in place: 0 denied: 1 current: 1 max: 16383 State: loan

  DISPATCHER < machine: ABIGAIL, pid: 1260 >

  (ADDRESS = (PROTOCOL = tcp)(HOST=ABIGAIL) (PORT = 1063))

  "D003" put in place: 0 denied: 1 current: 1 max: 16383 State: loan

  DISPATCHER < machine: ABIGAIL, pid: 1140 >

  (ADDRESS = (PROTOCOL = tcp (PORT = 1062))(HOST=ABIGAIL))

  "D002" put in place: 0 denied: 1 current: 1 max: 16383 State: loan

  DISPATCHER < machine: ABIGAIL, pid: 140 >

  (ADDRESS = (PROTOCOL = tcp (PORT = 1059))(HOST=ABIGAIL))

  "D001" put in place: 0 denied: 1 current: 1 max: 16383 State: loan

  DISPATCHER < machine: ABIGAIL, pid: 1072 >

  (ADDRESS = (PROTOCOL = tcp (PORT = 1057))(HOST=ABIGAIL))

  "D000" put in place: 0 denied: 1 current: 1 max: 16383 State: loan

  DISPATCHER < machine: ABIGAIL, pid: 748 >

  (ADDRESS = (PROTOCOL = tcp (PORT = 1058))(HOST=ABIGAIL))

  "DEDICATED" set up: 0 denied: 0 status: ready

  LOCAL SERVER

  The command completed successfully

  I added this on my listener.ora

  DIRECT_HANDOFF_TTC_LISTENER = OFF

  Now it works!

  Moral of the story, google is your friend lol. Thanks for replying tho!

• Maintenance mode, unable to connect: 514 error connection to the instance of service pass vmds

  Hi all

  I do a few patches manually on ESX 4.0 host.  I forgot to get into maintenance mode, tried to patch and had an error on entering maintenance mode.  So I tried to get into the mode of maintenance with the following command:

  vimsh - n hostsvc/e/maintenance_mode_enter

  I get these messages:

  Current working directory: / root

  vmaCore: initSSL: make versionCheck = true

  handshake Timeout = 20000000

  Unable to connect: 514 error to connect to the instance of the service host-vmds

  Not connected

  Not connected

  Someone has ideas of what happens and how to solve?

  Thank you.

  Take a look at reboot on an ESX or ESXi Server management agents and VMware: hanging out on an ESX Server maintenance mode (9639912)

• RH10: Test connection displays error: could not contact the site at the specified url.

  Hello

  I am using sharepoint as a control source code for my project. Here are the steps mentioned in the link of reference robohelp 10.

  • Configure RoboHelp for SharePoint settings
  • Configure the SharePoint document library settings
  • Add a project to a SharePoint document library

  Step 1 & 2 are completed successfully. But in step 3, when I add version control, an error message appears.

  File-> Version Control-> add to version control-> connector Sharepoint RoboHelp-> Ok-> enter Sharepoint site-> test the connection

  Error message: "test connection displays error: could not contact the site at the specified url.» There is no web named *. "/ _vti_bin/sites.asmx.

  Help, please.

  Hello

  Using SharePoint 2010? Earlier versions are not supported for version control.

  What is the URL that you use? You must point RH on the site or subsite holding library. Not the library itself.

  Take a bow

  Willam

• NetConnection.Connect.Closed not raised in iPhone closed Server

  I have a video application written in Flex (4.6/3.2) that monitors, it is the connection to the server of video quality and disconnects. Everything works well in Android with all the events I've tried properly informed and managed however, in iOS so I focibly stop my server I don't get a NetConnection.Connect.Closed event in my Manager (or any other event).

  Also has anyone seen this behavior?

  Found this - http://help.adobe.com/en_US/flashmediaserver/devguide/WSae44d1d92c7021ff-1f5381712889cd7b5 6 - 8000.html

  Follow-up of a connection on a mobile device

  Some mobile devices may not receive a message from "NetConnection.Connect.Closed". In this case, you can control the NetStream.bufferLength and NetStreamInfo.byteCount properties in a timer to discover network problems. When NetStream.bufferLength is less than NetStream.bufferTime, and NetStreamInfo.byteCount does not increase, there is probably network problems.

  netStreamMonitorTimer.start(); netStreamMonitorTimer.addEventListener(TimerEvent.TIMER, timerHandler); lastByteCount = 0; private function timerHandler(e:TimerEvent):void{      if(netstream.bufferLength < netstream.bufferTime && netstream.info.byteCount == lastByteCount) {           // Network has issues.. reconnect to a new NetConnection           netconnection2 = new NetConnection(); ///on NetConnection.Connect.Success:           netStream.attach(netconnection2);      }      lastByteCount = netstream.info.byteCount; }