Excerpt from drivers and then nothing
Hello
I have a photosmart c4680 (c4600 all-in-one printer). The disc supplied with the printer has no drivers for my computer which is running windows 7 (64-bit), so I came here to download. Before I download, but a year ago I had to uninstall for one reason or another. I have never been able to download it again. I have download the drivers and double-click the file. He begins to extract and goes to 100%, but then nothing. Some help would be wonderful.
Hello
Follow the steps below and check if it solves the problem:
1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.
2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
7 restart your PC
8. run the installation file and check all difference.
9. Once you have finished, remember to open McAfee and re-enable real-time scanning.
If the steps above does not help to solve the problem, open the Device Manager and devote the processor category, if you have an AMD processor trying to install the patch below:
http://ftp.HP.com/pub/softlib/software12/COL40390/OJ-98352-1/HPAMDC50PATCH.exe
Kind regards
Shlomi
Tags: HP Printers
Similar Questions
-
None of my games will start in Windows 7, drive spins and then nothing
I did a clean install of Windows 7 and tried to play some of my games, both downloaded and those I have records for, but nothing starts.
I'm running a P4 3gig emachine with 2gig RAM.The game installed fine, but when I throw the disk spins then stops and nothing else happens. I get some error massages and I tried to run in an earlier version and run as administrator. and still nothing.
I ran SFC scan and it came back without any problem, and I've also updated my drivers and still nothing... Please help before I die of boredom!
Hello
Check if you are able to run these games when your PC is in a clean boot state.
1. sign the computer by using an account with administrator rights.
2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue
3. on the general tab, click Selective startup, and then clear the check box load startup items.
4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
Note: following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
Now that the computer is in clean boot state, try to play these games and see if you are able to. If the games play, you can follow the steps mentioned in the knowledge base article below to determine which startup item or service could be the cause of the issue.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
2. on the general tab, click the Normal startup option, and then click OK.
3. When you are prompted to restart the computer, click on restart.
Post back with the result.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think
-
Original title: when I go to install Windows 10 the blue window appears and then nothing
When I update my system to Windows 7 home premium Windows 10 blue box appears and then noting. I tried Windows update troubleshooting and RC Datastore error code 0 x 80070057. Any help with this would be great. Thank you
Hello
Thanks for posting your query in Microsoft Community.
I understand you are trying to install Windows 10 and nothing happens and I'll be happy to answer your query. I appreciate your efforts to try to solve your problem and help you with the following additional steps that will help you diagnose and fix the problem.
Method 1: Error code 0 x 80070057, thank you suggest follow the steps described in the following link and check if the problem persists.
Difficulty errors Windows Update corruption as 0 x 80070002 and 0 x 80070057
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows
Method 2: If method 1 does not work, try to follow all the steps in the following link and get the fixed number. These steps also include when you rename a file, called pending. XML as a method 11, which will prevent your system from the error: «failed to Setup updates windows.» Changes in return ".
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
Note: Please restart all the Windows update services that were stopped during the troubleshooting as indicated in the link above.
Try the following steps and after return your results for further assistance, we will be happy to help you.
-
Used for Adobe Pro XI, after download download manager a screen asked the English language, said yes and then nothing, no installation... help Windows 7 x 64
Hi nucar,.
Once Adobe Download Assistant is installed, you can start at any time and choose a product to download at the bottom of the window. Updates list as new products will be available for download with Adobe Download Assistant.
Otherwise you can try to download from direct download links available at: download Acrobat products | Standard, Pro | XI, X
Kind regards
Rave
-
Can I rent a movie from iTunes and then see it on the plane?
Can I rent a movie from iTunes and then see it on the plane?
In principle Yes. See about renting movies from the iTunes Store - Apple Support. Pay attention to this section:
To watch your movie when you are disconnected, as on a flight from the airline where there is a Wi - Fi connection:
- Download the whole movie before going offline.
- Press play to start watching. The 24 hour timer starts even if you are offline.
You may want to download rented movies before the day of your trip to make sure you have the time to download all the content.
TT2
-
Time Capsule A1355 no light, no sound? worked this morning now after connecting it, first green light solid, quickly followed by amber is more solid, which turns off and then nothing? I'm not in the airport or if directly connected to the Macbook air utility. It is running the latest firmware, updated 7 days ago and everything was fine until now. Tried both a soft and a hard reset factory but still nothing, but the same brief glow only after restarting each time before going dark again? Any ideas if it can be fixed or if it's as I read elsewhere dead now?
Thank you
Any ideas if it can be fixed or if it's as I read elsewhere dead now?
He died... the fact that the main witness turns off is unusual in this model.
It is common to the next... A1409 (gen4)
What happens in the Gen3 is normally a few deaths on the Board... or a bunch of capacitors is low...
If yours is a very fine introduces Gen3 just before Gen 4, it is possible that the same fix on the Gen 4 could work.
I found early Gen4 may fail as Gen3 but must admit that I am yet to see the Gen3 with welding problems.
I doubt repair is worth it. The Gen3 is now about 6 years... give or take... This is way beyond the standard lifetime of a TC.
If you want to play, I'm happy to help you... but I would not spend money on it.
-
How do I register a very old acrobat from adobe and then download the upgrade? It seems that the serial number is not consistent with the serial number required by the adobe Web site. My serial number starts with the letter instead numbers.
Please see:
Redeem your student and teacher edition purchase, convert a redemption code to a number of series and much more .
I hope this helps.
Concerning
Megha Rawat
-
PES 12, I installed on a windows 10, the software has been activated on an old computer (only once, so another installation should be possible). When I try to start the program, I get a dialog box asking for registration within 7 days, or that the software will stop working. I follow instructions, use my Adobe ID, accept the terms, and then - nothing happens. I didn't even get an error message. PSE does not start. If I click on it again, the same thing happens. Does anyone have an idea how I can fix this? Please?
Nikolas
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===>===> NOTE DAYS AND TIME
Don't forget to stay signed with your Adobe ID before accessing the link below
Serial number and activation support (non - CC)
-
I've been using Illustrator but I opened the files would go to the bottom of the page as so dirty. I check my drivers and then uninstalled the program who intend to reinstall, but now it is said that the files are already installed.
No one can tell you anything without the proper system or other technical details info. If you have installation problems, start by running the cleanup tool:
The Adobe Creative Cloud Cleaner tool allows to solve installation problems
Mylenium
-
I loaded LR CC and open it Flash the Welcome screen and then NOTHING. Uninstalled and reloaded and same thing happen. ! !
-
Since the upgrade to 12.0, I am only able to do a Google search. After the initial search, nothing happens when you try to make another. I have to close the browser and reopen it to each search. Any ideas.
Try to start Firefox in safe mode. This mode disables all extensions, customizations, hardware acceleration, etc., temporarily for the diagnosis and troubleshooting. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker.
A few other basic problems you can try things is the following:
Run all Windows updates, install all required service packs, etc.Updating your graphics driver (Firefox uses the graphics card for rendering and an outdated graphics card driver can cause problems. https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers.
Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.
Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.
-
BSOD would be and then nothing
Hello. I was running a game in my computer when they suddenly BSOD, close the game and has blurred the image on the screen. I waited outside in the hope that he would return to normal. When he failed, I stop the PC by pressing the power button. When I tried to open it again, after the startup of Microsoft Vista, all progress bar I got was a blank screen with only the pointer from the list. On the next reboot, once again by closing the power button, I got an error message "0xc0000006 (0x754cebf6 0x0088f0dc)", asking / invites me to insert the startup disk in the appropriate drive, and then press any key. All I can do is check the CMOS Setup and nothing else. I currently don't do anything fearing that it might further complicate the problem.
BTW, I used a Vista Enterprise edition. Thank you!
If you are unable to Windows, try to go to Mode without fail (quickly press F8 just before the Windows splash screen appears.
Please provide the following information:
-Zip please the contents of the directory C:\Windows\Minidump
-Transfer to the public area of a SkyDrive (https://skydrive.live.com) account
-Post a link here so we can download it.
and
-Go to start and type "msinfo32" and press enter
-When the utility opens, save a copy of it as an .nfo file and another copy in a txt file.
-Zip them upward and download them to the Public to a SkyDrive (https://skydrive.live.com) account field
-Post a link here so we can download it.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65
Use SkyDrive to upload collected files:
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65
Instructions courtesy of http://www.carrona.org/
And http://sysnative.com
More reading both. -
Product configuration... Please wait and then nothing!
Hello
I had my HP LaserJet MFP M175 np 100 for nearly two years. It has been implemented for almost the same two years without problem. Recently, I tried to add two new laptops to wireless and the majority of wireless laptops connected started having problems printing. In addition, all the IPAD is connected to the wireless printer could no longer find the AirPrinters printer.
So I tried to uninstall the driver of any PC laptop, so that I could start over completely. Now I'm trying to place the main laptop on the connection and when I install the driver with the CD for the printer comes with, it goes through all the steps up to 'Install '. When he arrives to install and has written to connect to the printer and the PC, I connect the laptop via USB, and then the login step 100%. The next screen says "configuration...". Please wait "." Then the meter never passes 15% and wrote the error message that appears: "unable to communicate lease to ensure that your PC and the product are connected via the USB cable and that the product is on and ready."
Many times I reinstalled the software I've never had this constant message. I tried on another laptop and it still gave me the same message on that one. Can someone help with this error message?
Help, please!
Thank you!
Hi @ChristiC ,
I understand that you cannot set up the printer on the wireless again. I can help you today.
If the printer is in an error state, it will not be recognized on the computer.
Power cycle the printer.
Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.
Restore the default settings of the network printer.
- Press the Setup button. (key)
- Select the network configuration Menu.
- Then select default settings.
Print a configuration report to ensure that the IP address is 0.0.0.0 and the SSID is disabled.
Go to the install button (key) on the printer, arrow to the reports on the right, select config report.
Check Device Manager to see if the USB printing support has been installed for the printer or with the name of the printer, under Bus USB controllers. How to make in the Windows Device Manager?
Let me know how the printer is listed, or if you have exclamation points.
If you have an exclamation point on the printer, right click and update the printer drivers.
If the pilot will not be updated or you have a composite USB or an unknown device, try and update the driver, if it will not, right-click and delete the entry.
If the printer is not listed, or would not be updated, unplug the USB cable and run the uninstaller from the CD.
I disable all the start up programs and temporarily disable the Antivirus software to see if there is a program to interfere in the background. How to use MSCONFIG. Click the Startup tab and click Disable all.
Then download, save and run the latest drivers. Drivers HP LaserJet Pro 100 color MFP M175nw.
Test the printer.
Then you need to go back and enable startup programs and turn on the Antivirus software.
What operating system you use on computers? How to find the Windows Edition and the Version on your computer.
Please provide detailed results if you're still having problems.
Good day!
Thank you. -
Click next to start installation, and then nothing happens
Bought 11 Acrobat from Best Buy a few months ago and it did not open immediately. Now, I am trying to install. Connected to Adobe online, code redemption, received from serial number. A ran setup.exe from the included CD, serial No. entered and clicked on install. The CD will appear for a few minutes then stops. Then nothing else happens - installation status remains at zero. Rebooted a couple of times to try again with the same result.
Hello
If you have a problem to install from the CD, you can download setup at the bottom of the link.
Download Acrobat products | Standard, Pro | DC, XI, X
Concerning
Gilles marneffe
-
I use RemoterVNC on my iPhone to log remotely on my Mac at home so the children can use the computer without my go physically to the computer. (I admit, I am a bit lazy like that). However, lately when I launch RemoterVNC (on my iPhone), do the business of the connection, and then exit the application, the remote Mac began a disconnection. He also started doing this when I connect from my first Mac via screen sharing. It is a relatively recent behavior. Someone has an idea what setting I have (inadvertently) enabled to prevent the computer from automatically disconnect when the 'access app' is no longer active on the remote device?
Go to System Preferences > energy saving > computer sleep > drag it FOREVER to prevent disconnection of your mac.
Think simple.
Maybe you are looking for
-
Transparent BG involved Keynote
When I have the BG in Keynote, assign the value 0% fill of a color some transitions are acting strangely. (I do this for export sequences from Keynote to QT with a transparent BG). Specifically, during a 'dissolution' images of the next slide just ap
-
Damaged liquids Macbook Pro 2012 still works?
(sort of long story) In January I spilled the iced coffee at the hinge of my 2012 MacBookPro. I immediately turned upside down and tried to wipe off iced coffee as well and comes off my MacBook as possible. I thought that it worked because my macbook
-
my computer fades when power disconnected, y at - it a setting that I can do to stop it
-
can't turn on system restore I have tried the help menus but there is no tab click propertys system
turn on system restore
-
My wireless laptop have double the speed of the internet than my Wired desktop pc
I just bought the Linksys E2000 and configure properly with a single office (wired connection), adapter of a phone (wired connection) and two laptops (both connected wireless). Everything works very well - the phone works and all computers can acces