Excerpt from HRMS in underlying query system

Similar Questions

• Excerpts from continuous data acquisition

  Hello

  I want to make an acquisition of continuous data with a NEITHER-6133 @ 1ms per channel. The data must be stored on hard disk. At the same time, I want to take excerpts from acquisition to calculate different values. The acquisition of the extract must be triggert by an external digital trigger.  Are there examples, which combine continuous data collection and collection excerpts?

  Thank you very much.

  Best regards

  Michael

  System

  Windows 7

  LabVIEW 2012

  NOR-6133

  Thanks to the support of NOR-Germany, I found a solution for me:

  1.) continuous trigger switch

  Connect 2) the trigger for the signal to a digital i/o

  3.) synchronize AI and DIO

  Excerpt 4.) the samples needed by the search within the digital waveform pattern

  Result:

  The example shows 4 IA channels Cup (tested on Win7, NI PCI-6115, 4 channels each 5. MECH / s) and calculation on extracts from each channel signal triggered parts.

  

• Excerpt from lag

  My extraction process do not have lag, however "time since Chkpt ' indicates 5 hours? Why is this? Should I have any concerns?

  Program status group Lag time since Chkpt Chkpt

  MANAGER RUNNING

  EXTRACT DP4 running 0000:00:05 : 00:10

  EXCERPT from RUNNING REI2I 00:00:04 05:00:08

  REPLICAT RUNNING MREL1 00:00:00 05:00:04

  GGSCI 52 > info rei2i

  CLIP REI2I last started 2015-11-04 12:31 status running

  Checkpoint Lag 00:00:05 (updated 05:00:09 there are)

  Process ID 6397

  Log read Checkpoint integrated Oracle Redo Logs

  2015-11-04 12:38:47

  RCS 310.167019440 (1331606881200)

  The issue was caused by the system, do not sync with NTP server upward, so the time was 5 hours off.

• Please suggest a select query / under query with using any routines or

  source table: three columns ORIGIN, DESTINATION, MILES
  
  Origin Destination Miles
  
  Sydney Melbourne 1000
  Perth, Adelaide 3000
  Canberra Melbounre 700
  Melbourne Sydney 1000
  Brisbane Sydney 1000
  Perth, Darwin 4000
  Sydney, Brisbane 1000
  
  out put: three columns ORIGIN, DESTINATION, MILES
  
  Duplicate routes should be ignored, so the output is
  
  Origin Destination Miles
  
  Sydney Melbourne 1000
  Perth, Adelaide 3000
  Canberra Melbounre 700
  Brisbane Sydney 1000
  Perth, Darwin 4000
  
  Please suggest a select query / under query with using subroutines or functions/pkgs to get put out table.

  Hello

  user9368047 wrote:
  ... Please suggest a select query / under query with using subroutines or functions/pkgs to get put out table.

  Why? If the most effective way to achieve the desired results is to use a function, why would you not use it?

  Here's a way, without all the features:

  SELECT     a.*
  FROM           source_table  a
  LEFT OUTER JOIN      source_table  b  ON   a.origin          = b.destination
                                        AND  a.destination       = b.origin
                        AND  a.miles          = b.miles
  WHERE   b.origin  > a.origin    -- Not b.origin > b.origin
  OR     b.origin  IS NULL
  ;
  

  If you would care to post CREATE TABLE and INSERT statements for your sample data, and then I could test this.

  Published by: Frank Kulash, November 6, 2012 19:39
  Fixed WHERE after MLVrown clause (see below)

• My gmail and Icloud accounts disappear from the list under "Mailbox store" in the mail. When I try to recreate my gmail account using the "new mailbox...» "I get the message"this account already exists. " What can I do to recover my mailboxes.

  I use YOSEMITE 10.10.5.

  My gmail and Icloud mailboxes (and several smart mailboxes) disappear from the list under "Mailbox store" in the mail. When I try to recreate my gmail account using the "new mailbox...» "(using the sign on the side down and to the left of the screen in Mail +) I get the message"this mailbox already exists. ». What can I do to recover my mailbox?

  Restart the Mac and Mail.

• excerpt from the previous version of create

  Hello!

  Is there a way to create and save a snippet of the block diagram for an earlier version? I realized that even if I save my VI for the previous version and open, the excerpt from png created by this version sooner is always LV 2014 version.

  Is it possible somehow?

  Thanks for the info!

  It should not conflict with those, but there was a bug in VIPM which caused the CTC to enter in conflict with itself in certain circumstances. You can read about it in the CTC support thread starting here. According to the changelog, the latest on the LAVA (3.2.3) should solve this. If you got all of the network tools, it's probably not the updated, so you should get the lava. If this isn't the case, I've also posted a temporary for the support wire, in order to get that one.

• I want to use my controller xbox 360, but windows 8 is not under operating systems, what should I do?

  I want to use my controller xbox 360, but windows 8 is not under operating systems, what should I do?

  Plug it in and let the auto drivers install.  I use mine all the time.

• Excerpts from a list or a block of text using

  Is this possible in 2015 of HR? Don't seem to be able to operate without the extract indicated below my list or paragraph

  for example

  1 step

  2 step

  excerpt from the code snippet

  3 step

  OR

  This is my introduction new fancy, but I can't put a clip in the middle of those words.

  excerpt excerpt excerpt

  What I want is to be part of step 2 or fall in the sentence that I have the extract. I saw old issues from years ago, that's not possible... hope that is not always the case.

  Thank you

  Nick

  Code snippets are blocks and can not be defined inline in a paragraph. (Although you can add it to a list item or a table cell.)

  In your case, you probably want to use the user-defined Variable. They are for shorter content, and you can add in a sentence running.

• I've set up a website in Muse. Any excerpt from fine to preview in a browser. When I download the file to make it live I am getting this error some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the

  I've set up a website in Muse. Any excerpt from fine to preview in a browser. When I download the file to make it live I am getting this error some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author. Art seems to be fine and the host site says it's probably coding error. What should I do?

  Hello

  Have you tried a few steps in the following article

  "Some files on the server may be missing or incorrect" Warning Message

  See if that helps. Let me know if you have any question.

• How to revive the last work, then from the APP? Or system restart?

  How to revive the last work, then from the APP? Or system restart?

  EIB zu ADOBE: "geht nicht mehr!  (this function is not longer possible)

• SERVERERROR trigger fires from the user of the SYSTEM

  We use the Oracle 10 g on Linux platform. The following trigger is created for the mistakes of trace:
  

  CREATE OR REPLACE TRIGGER test.error_log
     AFTER SERVERERROR ON test.SCHEMA
  DECLARE
     v_errnum    NUMBER;
     v_counter   NUMBER := 1;
     v_errmsg    VARCHAR2(1000); -- stack counter
     v_errnumparam  NUMBER;
     v_errparam  VARCHAR2(1000);
  BEGIN
     LOOP
        -- get the error number off the stack
        v_errnum := server_error (v_counter);
  
        -- get the error number off the stack
        v_errmsg := server_error_msg (v_counter);
        -- if the error number is zero then exit.
        v_errnumparam := server_error_num_params(v_counter);
        v_errparam := server_error_param(v_counter, v_errnumparam);
  
        EXIT WHEN v_errnum = 0;
        -- commit is required because we are in an
        -- autonomous transaction
        INSERT INTO error_audit(SID, ORA_NUMBER, DESCRIPTION, STATUS, CREATED_BY_USER, CREATED_ON_DATE, MODIFIED_BY_USER, MODIFIED_ON_DATE)
             VALUES (sys_context('USERENV','SID'),v_errnum, TRANSLATE(v_errmsg||';'||v_errnumparam||';'||v_errparam, 'x'||CHR(10)||CHR(13), 'x'), 'Y', USER, SYSDATE, USER, SYSDATE);
  
        -- increment the counter and try again
        v_counter := v_counter + 1;
     END LOOP;
  END;

  The problem is that when to connect us from an outline of the TEST, the following select statement error logs in the audit table. However, the following statement executed from the user of the SYSTEM does not record the error. Can any body guide me to fix this error?
  

  ALTER SESSION SET CURRENT_SCHEMA = test;
  select * from error_audi
                *
  ERROR at line 1:
  ORA-00942: table or view does not exist

  Why is it? Trigger when the current user is TESTING and not someone else. ALTER SYSTEM SET CURRENT_SCHEMA does not change the current user.

  SY.

• Excerpt from forcing to check the point/single looking for archive_log 5 - days years

  Hey guys, I'm having some strange problem and cannot figure out what is the issue. I believe that theoretically I tracked down but can't prove it.
  
  Here is what is happening, I have an excerpt from process running for a specific schema, now, this diagram is inserted in every 4-5 days. CDC is able to transfer data and runs correctly.
  
  Here's the question, when I stop the cdc (finishing or maintenance) and restart it lets say 20-30 minutes more late it error.
  The error message says its looking for a newspaper archive, the odd part is his looking for a newspaper archive that is aged 4 to 5 days. We keep only 1 day drive at about 2-3 days in RMAN. (and up to 6 months on tape)
  
  I can't understand why the extraction process would a newspaper of archiving aged 5 days? The only explanation that I have is because this scheme is only written too (specifically inserted) every 4-5 days since the last time the extraction process in fact obtained data from a newspaper of archiving (or redo-log) were about 4-5 days ago, and somewhere in the table control station is this info. Now, if this is the case and I am on the right track, what can I do? Do I need to have somehow the extraction process "checkpoint"(ne sais pas sinon comment décrire) every day? ".
  If my theory is wrong, any ideas of what might be the cause?

  What do you mean by "fix" it?

  OGG still provides ongoing transactions.

  So with these commands before you can see the oldest open transactions.

  with the showtrans command you can see what's open... (so always run that you stop before)... If you do this you can avoid stopping in the middle of a transaction.
  Now, if you mention... it does not solve it... (and could not)

  You can decide to rolllback this transaction... :) (of course you should talk to your people of app to see what are the consequences of this)

  Here's a test case for you:

  Insert into Table A

  Go home

  Tomorrow make the order trans show.
  You should see the open transaction and that extracted OGG is looking for archiving from today newspapers.

• Change the amount of RAM of guest from the command interface operating system

  Hello

  I'm not sure that this is possible and is the reason why I post this topic here (I hope I'm in the right place but I'm sorry if I'm not). Is it possible to update the allocation of memory in a guest from the command line operating system? My goal here is to improve the memory of the guest operating system from 1 GB to 4 GB and then schedule a reboot after hours before it takes effect on. Yet once, not for sure if this is possible, but thought I would ask.

  Thanks in advance,

  John

  You can do this through PowerCLI. Check it out here:

  http://xtravirt.com/ICT-freak-PowerCLI-script-schedule-memory-and-or-vCPU-updowngrade

  You may also plan this to be awakened in the night...

  "The only thing that annoys my learning is my education."

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful'

• Excerpt from ClickToGoToWebPage does not

  Hello

  I'm having a problem with the excerpt from ClickToGoToWebPage because it works while I'm in a preview mode, but once I have publish my file, nothing happens when I click on the button.  I tried to created a simple file to test the problem.  I chose actionscript 3.0 with flash player 11.4.  I wrote a text and then converted to a symbol with the name of the instance as: test.  I joined the go to Web page snippet with the name of the appropriate forum and it works perfectly in the preview, but not when published as a HTML file.

  I'm working on a recently purchased flash cs6 and doubt that an update would help (which I don't know how to do).  the version is 12.0.2.529.  I use windows 8.

  Here's what's in my layer actions:

  Stop()

  test.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage);

  function fl_ClickToGoToWebPage(event:MouseEvent):void

  {

  navigateToURL (new URLRequest ("http://www.adobe.com"), '_blank');

  }

  on an unrelated note, why can't I just write some text and then put the web address in the text box 'Link' in the text options?  I tried this, but it does not work as well.  What is the function of 'Link '?

  If someone has seen, it would be appreciated.

  Thank you

  You probably have a problem of security sandbox with your link and navigateToURL.

  Download your files on a web server and the test, or add some flash to your list of trusted files, http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l

• Excerpts from contour

  Hi all
  
  An excerpt from a corrupted database plan will be used to rebuild a new application and the new database.
  
  Entries will be very useful.
  
  Concerning
  Prom.

  If this is the outline you're after you can could easily just create a new database and copy the existing schema, or open the outline and save as on the new database.

  See you soon

  John
  http://John-Goodwin.blogspot.com/