Exchange Server support

Similar Questions

• Software installed in windows 7 that caused Microsoft exchange server to stop working.

  I took off the SW and it wouldn't connect. PC restored to before the installation and it was very good. It doesn't seem to be holding restore point data. The next time I tried to connect remotely, I had to restore again. WHY? This has worked well for years.

  I am running Windows 7 64-bit OS. Installed software was for a VOIP virtual phone. When I tried to access the exchange server, nothing happens. I have a white screen. It seems not yet try and connect. I restore the PC to install the software before and everything is good. I do my work and come back later and try and access the server again, and nothing happens. I have to restore again.

  I've never had a problem with once restoration has been made, that it 'does' and I have to repeat the process. Does anyone have an idea of ro possible explanation on how to solve this problem permanently?

  Hello Sues,

  The question you have posted is related to Microsoft Exchange Server and you will get the best resolution of the Microsoft Exchange Server support.

  I suggest you to check with Microsoft Exchange Server support for more information.

  http://support.Microsoft.com/ph/730

• Exchange Server 2007 SBS 2008 Service Pack problems

  I am server running Exchange 2007 on Small Business server 2008 (SBS 2008). I tried to install SP2, but it omits the two windows update and manually. Can someone tell me first what version I am running?

  Help / form displays the Exchange Management Console:

  Version 08.01.0436.000

  And repairs on Exchange Server from programs and features shows 2007 SP1 setup. So I think that SP2 to be then I also ran SP3 but it does not work.

  Here are the lines to the end of a journal:

  [05/03/2014 08:54:13] [0] Setup will run the task 'uninstall msipackage.
  [05/03/2014 08:54:13] [1] Setup launched task 'uninstall-msipackage - logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' - '24b2c164-de66-44fe-b468-a46d9d5e6b31'-PropertyValues ProductCode' BYPASS_CONFIGURED_CHECK = 1 DEFAULTLANGUAGENAME = FRA "
  [05/03/2014 08:54:13] [1] start of treatment.
  [05/03/2014 08:54:13] [1] 'PackageName' property is 'EXCHANGESERVER.msi.
  [05/03/2014 08:54:13] [1] remove the MSI package with the code "24b2c164-de66-44fe-b468-a46d9d5e6b31".
  [05/03/2014 09:09:01] [1] [ERROR] an unexpected error
  [05/03/2014 09:09:01] [1] [ERROR] failed to remove product with code 24b2c164-de66-44fe-b468-a46d9d5e6b31. Fatal error during installation. Error code is 1603. Last error reported by the .msi package is ' could not open key: UNKNOWN\Components\7ABFE44842C12B390AF18C3B9B1A1EE8\461C2B4266EDEF444B864AD6D9E5B613.   Check that you have sufficient access to that key or contact your support team. '.
  [05/03/2014 09:09:01] [1] [ERROR] fatal error during installation
  [05/03/2014 09:09:01] [1] end of the treatment.
  [05/07/2014 19:45:17] [0] end of the installation

  There is a registry key to match and used for the configuration administrator account has access to it, I think? What does this newspaper?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows Server 2008 standard R2 with Exchange server 2010

  Hello

  I have an old server that has been removed from the network that it was used for active domains (domain controller) and emails,

  A new server (Windows Server 2012) took his place with a new address ip and domain name for every pc.

  I would like to return the 2008 server in the network so I can continue to use exchange as your e-mail server server.

  How to 'reset' the server so I can put in the new network, using the new domain controller and damain network and have the old server as the e-mail server.

  Does anyone have instructions step by step on how to do it, or can give me a link on how to do it.

  Thank you.

  Hello

  Support for Windows Server/Exchange Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  or, possibly,.

  http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=ExchangeServer

  Thank you.      :)

• Configure Exchange server to allow the transfer of mail of the AS / 400

  I need to configure my exchange server except my AS - 400 email, how to configure the exchange server

  Hello PercyParker,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Exchange Server and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer

  Best regards

  Matthew_Ha

• Microsoft Exchange Server Remote Wipe

  Hello, I heard that Microsoft Exchange Server can remotely wipe any device that is connected to the Exchange Server. Is this true? Each device that supports Exchange can be destroyed including personal computers with Outlook running? Thanks for the reply 

  Device here mainly refers to mobile devices such as cell phones, you must save it inside the exhange server to be able to remove it or wipe it. But on the PC or desktop, in this version it will not delete or format your PC.

• Send a file PDF from Quickbooks using microsoft exchange server 2003

  Since we got our MS exchange server, I had trouble sending pay stubs created in Quickbooks and sent via Outlook.  Some people have an attachment, some get it as a file windat.txt and others get no attachment at all.  Seems that most of the people with outlook express receive nothing.  Gmail and hotmal download the pdf file.

  Hi smellieellie,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 forum.

  http://social.technet.Microsoft.com/forums/en-us/exchangesvrmigration/threads

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• setting up pop3 in exchange server 2003 service

  Hello

  I would like to configure the Exchange server pop3 service so that the user can access their emails outside my local network with their application to Ms outlook.

  Please help with the necessary configurations, I need to point users will be able to access their emails outside my LAN

  Thank you for visiting the Microsoft answers community site.

  The question you have posted is related to Exchange and would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Account Exchange does not authenticate to exchange server with a domain under Windows Surface 3 pro 8.1 user

  Hello

  We recently bought a Surface 3 pro from our supplier that has windows 8.1 pre installed (OEM) and I have set up a local user with local administrator rights account, I did windows updates, also activated the account administrator local and then added the device to our area, but I can not set up exchange on the domain user account. I also gave this area local administrator user rights, but it does not check the name on the Exchange Server. It makes the connection to the network, on behalf of the research, but it will not connect to the server. I tried to manually configure upwards, but not luck. When I created this same domain account on a local user with administrator rights, I works very well. I did several times on Windows 7 and never had any problems. Has anyone encountered this problem? Help please.

  Thank you!

  Hello

  Thanks for posting in the Microsoft Community.

  As you said you are trying to connect to the domain network, we have a dedicated team with advanced tools and permission to help with such issues.

  I suggest you to send your query in TechNet forum for better support.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Let us know if you have other questions about Windows in the future. We will be happy to help you.

  Thank you.

• Exchange Server Migration 2000/2003, unity 4.0 (1) (4)

  We are running Exchange 2000 in an advertisement in 2000 with the 4.0 unit (1).

  Due to some problems with our current Exchange Server, we need to accelerate our migration to Exchange 2003.

  We will be upgrading the schema AD 2003 this week, and planned to upgrade Exchange this weekend. I know this will have a direct impact on the unit even after reading the documents to upgrade, I'm not 100% sure to get a grip on that everything must be done to make this a smooth transition.

  How the migration will work, we will build a new Exchange 2003 server in the same organization, and then move the mailboxes to that server. We then decomission existing exchange server and build another with his namesake and IP address as a Server 2003 and migrate all the mailboxes back, permanently.

  With this double-move in mind, does anyone have any advice, suggestions or traps to help us?

  Thanks in advance.

  Brian

  Running Exchange 2003 ForestPrep causes a REFUSAL of ACE appear in each administrative group for the Exchange domain servers group on the 'Servers' container. Assuming that you are using the security model, the permissions wizard puts in place where the unit connects with a domain account that is not in the Exchange domain servers group, you should be fine. But I very well many customers choose to use a method of security home brew or put users in a bunch of unnecessary groups. So as have done you that ForestPrep does not grief of the unit.

  Unity 4.0 (3) and later supports Exchange 2003. So I would upgrade to 4.0 (4) of the unit before moving to Exchange 2003. Once you're at 4.0 (4) you just need to upgrade to Exchange 2003 Exchange System Manager and run the latest version of the permissions wizard if you plan to run Exchange 2003 with SP1. You can download that here:

  http://www.ciscounitytools.com/App_PW_403.htm

  When you bring the new tipping online server, you must re-run the Configuration Cisco Unity Message Store of add/remove programs and let the unit move the Unity_servername mailbox by choosing a new partner server. You can t just move the mailbox without the cause of the layout of the store Message what unit won t know where to find. Same thing for the what swing you on the new Exchange 2003 server.

  Thank you

  Keith

• Integration of State of the 10 blackBerry Exchange Server

  Hi all

  I consider changing my work for a BlackBerry phone, but before I do that, I need to know how much BlackBerry 10 OS integrates with an exchange server.

  I need to be able to do the usual things like send and receive emails. Sync. my meetings calendar/setup, sync. Notes and reminders etc. It also requires that I can synchronize. contacts.

  I can see from these forums exchange integration is built in 10 BB, but how does it work? I'll be able to do everything above?

  Kind regards

  Peter

  Hey, check with your IT Department.  BB10 supports ActiveSync.  If your company supports ActiveSync, then you are good to go.  I use activesync and it works fine.  Everything you mentioned works for me, but check first with your company.  Each configuration of exchange is unique.

• Configuration for the Exchange Server issue

  I have a question on an Exchange Server, I noticed that one of my Exchange servers has 4 partitions spanning 2 hard drives and a parition of M which is 55GO, but that does not appear in disk management. M partition contains the domain folder, the mailbox databases are on the D: drive. How will I know how much I really voicemails of disk space? And this configuration is supported?

  Chris

  The "M" 'virtual' drive that resides on Exchange (55 additional GB, its representation is not just messages of real exchange located on who will drive you have configured for the mail store).

  Another pattern on this drive "M":

  The default for this reader is the reader of 'm', but if you manually created a "M" drive before installing Exchange will change to another drive available. It is now recommended to 'disable' this disc.

  Run the "Best Practices Analyzer Tool" on the Exchange Server and it will find any question you should change. To turn off virtual drive is one he'll find and indicate what registry entry to change:

  http://www.Microsoft.com/technet/prodtechnol/exchange/downloads/2003/analyzers/default.mspx

• WRVS4400N hosting Exchange Server

  I have a WRVS4400n. I have mail.mondomaine.fr that connects to my external IP address where my server is located. Whenever you goto which is the domain or ip address tries to connect to the router. I have remote mgmt disabled as well. Help?

  Thank you

  If you try to connect to mail.mondomaine.fr from inside the company, I'm not surprised, make you the router, but outside you should not get anything if nothing is passed and management is disabled. If this is true, something is wrong.

  Now, finally, I have checked that the WRVS does not support several addresses IP WAN, so for your mail server "mail.mondomaine.fr" must be your IP given to you by your ISP. However, once your exchange server is ready and you can access internally, you must transmit TCP 443 and 25 at least to your mail server. Nothing else to do for your typical exchange deployment.

• Compatibility of Exchange Server 2013 with OIM 11g R2 BP 14

  Hello

  My system is configured as shown below the configuration and integrated into Exchange Server.

  Wanted to know would be compatible with Exchange server 2013.

  Would appreciate if you could share any link or documents that list this matrix.

  IOM - 11.1.2.0.0 with BP-14 version
  

  Database Version - Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production

  WebLogic Version - 10.3.6.0

  Version of connector AD- 11.1.1.5.0

  AD installed on Windows Server 2008
  

  Version of Exchange Connector - 11.1.1.5.0

  Type of current - Exchange Server OnPremise2010

  Thanks in advance

  Puneet

  You must upgrade your Exchange server connector .

  Please see below note;

  Target systems

  The target system can be one or a combination of the following:

  • Microsoft Exchange 2007 SP1, SP2, SP3 (64-bit)
  • Microsoft Exchange 2010 RTM, SP1, SP2, SP3 (64-bit)
  • Microsoft Exchange 2013 RTM (64-bit)

  For support of Exchange 2013, Patch 17239236 must be applied to the version 11.1.1.6.0 of the Exchange Connector. This Patch can come from My Oracle Support under patches and updates.

  Download location for connector:

  Microsoft Exchange

  11.1.1.6.0

  http://download.Oracle.com/OTN/NT/IAS/connectors/111/Exchange-11.1.1.6.0.zip Change - 11.1.1.6.0.zip

  ~ J

  Note:

  ------

  Please check the response as useful or correct when it is appropriate to make it easier for others to find

• Running Exchange Server application of hotfixes and service pack to the server mailbox without loss of data during the restore?

  People,

  I would like to know how can I safely ask the Exchange Server service pack or cumulative update for the server role mailbox (no DAG) without loss of e-mail during the downtime and roll back the snapshot?

  If I can do the following:

  1. stop all Exchange Server services.

  2. unplug the vNIC on the mailbox server

  3 take a snapshot of the virtual machine

  4. apply the service Pack of Exchange Server / Cumulative Update or Windows Update

  5 reset

  6 reconnect the vNIC, if the server online with no problem, commit / remove the snapshot, if not, then disconnect the vNIC followed to restore.

  would be - this sense being or support for Vmware and Microsoft http://www.vmware.com/files/pdf/exchange-2010-on-vmware-support-and-licensing-guide.pdf ?

  If yu have any other suggestions, please let me know here.

  Thanks in advance.

  Hey AlbertWT,

  I'll start by saying that I would not do.  Microsoft is explicit that snapshots are not supported with Exchange when virtualized.  See below (from Exchange 2013 Virtualization: help Exchange 2013):

  Some hypervisors include features to take snapshots of virtual machines. Virtual machine snapshots capture the State of a virtual machine while it is running. This feature allows you to take several snapshots of a virtual machine and then return the virtual machine to a previous state by applying a snapshot to the virtual machine. However, virtual machine snapshots aren't application aware, and using them can have unintended and unexpected consequences for a server application that manages the data of the State, such as Exchange. Accordingly, making snapshots of the virtual machine to a virtual guest computer Exchange only is not supported.

  Even if we ignore the statement of support from shadow copies that isn't always a good idea.  Here are some things to consider.

  (1) cumulative updates for the Exchange to modify the Active Directory schema.  Roll back the snapshot on the mailbox server is not undo changes made to RFA, which could cause functional supported questions.  See this link to give you an idea of how there is pattern AD updates in each CU Exchange and service pack: the Active Directory in Exchange 2013 schema changes: Exchange 2013 help

  (2) it is possible to send to come during the time you test the update, and if you need to restore you would need a plan to retrieve this e-mail.  Third party services may work, or you can prevent the email to come in your environment completely during this period, but these aren't the ideal solutions.

  A much better solution would be to create a lab environment that is isolated from the production.  You can either take clones of your Exchange and AD VMs and put them in a closed network environment, or create a laboratory and import the structure of your ad if it matches the production.  I think it is a much better way to test than to try to rely on stereotypes in production.

  Hope that helps!

  Matt