Satellite A500-15N "windows failed to load.

Similar Questions

• Satellite L300-147 - windows fails to load \Boot\BCD

  When I turn on my laptop windows will not load. I do not have installation discs and I can not load in safe mode or anything. The file is \Boot\BCD status is 0x000000f. The info is "an error occurred trying to read the boot configuration data.

  Can you help me please?
  Thank you

  You can enter advanced startup settings with F8 at the start?
  Is option fix my computer available?

• Main problems of Satellite A500-15N Backspace

  My Toshiba Satellite A500-15N was purchased last October, so it is not exactly ancient. Suddenly, the BACKSPACE on my laptop doesn't work a couple of days. Sometimes it works just not all and at other times, I have to press very hard or press on the right edge of the key to make it work.

  The behavior makes me think that it is a hardware problem. Someone knows something similar? Is go to the Toshiba customer Service my best option?

  Yes. Your best option is to contact the nearest Toshiba authorized maintainer. They allow to check the keyboard.
  If the keyboard is defective, I guess you will get a new and Exchange will be free.

• Satellite A100 - 02 M fails to load Vista

  My Satellite A100 - 02 m fails to load Vista.
  Is there a repair partition on the hard drive?
  If yes how do for her?

  Jef

  I don't know what the problem is here, but if you're not able to load Vista using F8 and safe mode, then there must be a serious problem.
  I think the best solution for you is to install Vista using recovery media delivered.

• Windows fails to load, the loading screen bar after installed KB2479628 _

  Windows fails to load once installed KB2479628, my Dell BIOS boots then the loading loading bar continuously scrolls. After now the power button for 5 seconds and re-start the computer, Startup Repair tries to run and need to use system restore to properly initialize.

  I uninstalled the update and disabled for windows updates won't install the update on its own.

  • Never had a failure of the before update.
  • running a dell inspiron e1705
  • V8.0.6 IE / Win Vista SP2a

  Research on the update, it seems that KB2479628 is very important. Is there a reason that my system is not compatible with it?

  [1] [of Spybot's Tea Timer is] Enabled

  [2] I was running AVG previos version and previous version of Comodo until the current version of Comodo conflicted with AVG...

  A1. Please disable the Tea Timer of Spybot and leave this option unchecked for now. See http://aumha.net/viewtopic.php?f=26&t=32409

  NB: If you don't fully understand what Tea Timer does and how it does, leave it off in a way permanent.

  A2. Comodo Internet Security includes an antivirus application. You should NOT have more than one 1 installed anti-virus application & loading at startup. You tell me that you used to have Comodo Internet Security (antivirus, antispyware, firewall) AND AVG Free anti-virus installed at the same time?

  PS: Let us a favor & edit your first post above: replace KB2479268 KB2479628typos. Thank you!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  Hello - anyone can help me find a solution to my problem?

  My problem: Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  I tried everything the sytem advised through SafeMode etc... Also, I tried to reload my OS - last updated through the windows update site. However, he did not - probably because all updates from MS, which means that it would not load from the DVD.

  It's a whole new system customized with MS Vista 64 bit, Office 2007 Untimate, Asus MB, 250 GB HD ATI video card. I used Vista for almost a year and had no problems until today. All of the original software.

  I have my thesis and several files, I was working on someone - I was doing consulting work to supplement my income as a student... Unfortunately, when I finally used my system last night it was ok. Now I canoe get my system up and running.

  Mark Merci for your comments.

  I found myself communicating directly with Microsoft and they were able to get my system up and running without losing me data. Hooray for Microsoft!

  My system is back to normal and I am assuring you that all my files are backed up on DVD.

• Error "Windows failed to load, status: 0xc000014c" when starting.

  Original title: help Edition Vista Home basic 32

  my pc has stopped working it is an acer aspire m1610, all I get is file: / windows/system32/config/system status: 0xc000014c windows failed to load because the system registry file is missing or damaged.    I tried to use my disc drivers and restore dvd does not...

  You have the Vista DVD?

• "windows failed to load because the nls data is missing or corrupted"

  IM currently using vista, and when I turn on my computer
  the following message appears: "windows failed to load because the nls data is missing or corrupted"

  What does this mean message?

  that means "nls"?
  is my information on my hard drive in danger?
  How can I fix?

  Recovery discs would be Windows Vista installation files.  It would be safe to use if they are needed when the sfc/scannow scanning.

  A recovery disc is a general term for media containing a backup State initial factory or a favorable condition of a computer such as configured by an OEM manufacturer or an end user. OEM supplied recovery media is usually comes with most computers to allow the user to reformat the hard drive and reinstall the operating system and preloaded software as it was when it was shipped.

  http://en.Wikipedia.org/wiki/Recovery_disc

• Windows failed to load because hal is missing or damaged

  I can't start my computer because its telling me that windows could not load because hal is missing or damaged. I tried to fix it by installing the cd to repair, but I can't restart the computer. I tried to choose different options in the menu of options advaced bood, but he always tells me the same message "windows failed to load because hal is missing or damaged. Help do not know what else to do!

  Hi Dimples328,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 2: I suggest you try the steps from the link below and check if it helps.

   

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Let us know if that helps.

• Windows failed to load because the system registry file is missing or corrupt. - status0xc000014c (Windows vista}

  Windows failed to load because the registry file is missing or corrupt... status 0xc000014c

  Hello

  1. have you made changes on the computer before this problem?

  2. are you able to boot mode safe?

  I suggest you perform System Recovery Options startup repair and check if it helps.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  For more information, see the following Microsoft article.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope the information is useful.

• problems of registry Vista-"windows failed to load because the system registry file is missing or corrupt"

  introduced a new card mother but used to winows full vista it tells me "windows failed to load because the system registry file is missing or corrupt" I can't fix it some trys to reinstall nothing helps, what I do is never had this problem b4?

  my disk is scratched then put xp on site

• "windows failed to load because that layer HAL is missing or corrupted"

  my laptop wont even start in safe mode because of "windows failed to load because the HAL is missing or corrupt" I don't have my software for my laptop. Help

  before that, I had problems to my laptop with windows startup, it worked in safe mode.

  Hello

  • What operation are you using?

  I suggest you follow the below methods that can help you resolve you issue.

  Method 1:

  Boot into the recovery console. Run "chkdsk/p". to check for errors. If errors are found, then run "chkdsk/r". Do follow link below:

  http://support.Microsoft.com/kb/315265

  Reboot to see if the problem is resolved.

  Method 2:

  • Boot into the recovery console.
  • Run "bootcfg /rebuild.
  • You will receive a message similar to the following:
    Total identified Windows installs: 1
    [1] C:\Windows
    Add installation to boot list? (Yes, no, all)
    Press on "y" then "enter".
    When "Enter load identifier" appears, type the name of the operating system (this name is arbitrary and it is just a label for the found installation) and press "Enter."

  4. when the "Enter OS Load Options" appears type "/ fastdetect" and press "Enter."

  5. close the recovery console to see if the problem is resolved

  Refer to this link: http://support.microsoft.com/kb/314058

• How can I fix the "Windows failed to load because the system registry file is missing or corrupt.'

  all of a sudden my computer goes from fine to a "Windows failed to load because the system registry file is missing or corrupt."

  and I don't have any idea how to resolve this its driving me crazy.

  I downloaded the iso file for vista, the restore disc but it not start when I restart my computer. what im supposed to do or am I missing something?

  You need to change the boot sequence:

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows fails to load. That it recharges on normal startup. Hangs on a black screen with a cursor in repair mode.

  I was in my class and hit the computer on the desk. I turned it and then turn it on again now, this problem occurs. It's a Toshiba, and Toshiba normal screen comes up and takes me to the screen "windows failed to load. When I choose to start windows normally, it hangs on the Green loading bar before you restart thereafter. I have it on the repair of the system right now, but he is suspended on a black screen with a cursor and nothing else.

  Hello

  Since then, he has been the "Crash test" the help of a computer store real (not the leeks and glances at a BestBuy
  or other BigBox stores) or the system manufacturer support is probably needed. The underlying problem is probably
  material and it is doubtful that all the efforts of software will work even if it is remotely possible.

  The problem may come from the damage or corruption of the hard drive for the next message will be directly related to
  This question.

  --------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite A500 PSAM3E - Windows 7 upgrade failed - error code: 0 x 80070570

  I install the win7 update on my Satellite A500 PSAM3E and when I arrive in windows files is growing - it stop and a pop-up message:

  * (Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0 x 80070570). *

  Stop the installation and I could do nothing, I restarted the upgrade but still the same.

  I just got my win7 DVD from Toshiba, the corrupt DVD upgrade or other issues, before the installation, a message appears that I need to uninstall install ATI Catalyst and ATI catalyst Control Panel.

  Need help from the expert who have already done the upgrade.

  Hello

  > before installation, a message appears that I need to uninstall install ATI Catalyst and ATI catalyst Control Panel.
  And why you didn t do?
  Maybe you run an earlier version of the display drivers and so you should uninstall them before you start the upgrade.
  Check it!

  After the upgrade, you can install the latest version of the Toshiba page display driver.

  By the way: Here you can find an update step by step:
  http://APS2.toshiba-tro.de/KB0/TSB9902P60000R01.htm