Exe version with database conn and report generation vi?

Similar Questions

• After the upgrade Lightroom on a mac. Remove the old version with old catalogs and files?

  Can I remove the old version with old catalogs and files? and what is the best way to go about this? Thanks :))

  Uninstall manually and then manually uninstall Lightroom

• Problem with database sql and TS 3.0

  
  

  Hello

  the solution is to use: select TOP 0 *... then the table will be loaded vacuum.

  schwede greetings

• Report generation-> generate an exe from a PC with different Version of Office

  Hello

  I want to build an exe from a VI that use Report Generation Toolkit. The application must be deployed on multiple PCs using Office 2000. During the development phase, I installed Office 2000 on my PC, and everything was ok. After that I was with her, I have reinstalled Office 2007. The Report Generation Toolkit to my PC is so for Office 2000 (it was installed when I had Office 2000 on my PC).

  These days I had to fix a few bugs in my application, I did a new exe but the part that generates the Word reports (using the GTA) doesn't work anymore - I received this error with-35... 9935 (or something like that).

  I tried to find the problem and I found this: with exactly the same VI (_Word dynamic VIs.vi - for Office 2000) nodes invoke from a PC with Office 2007 and Office 2000 PC look different. For example, in Word_Open_Document.vi, the node to invoke Document is different for a PC with Office 2000 + GTA for the year 2000 and a PC with Office 2007 + GTA for Office 2000 (no error).

  So, I tried to copy the VI from a PC with Office 2000 + GTA 2000 on my PC but I can't build it because I get the error: there are a few errors in dynamic VIs.vi _Word (invoke nodes do not match).

  Finally, my question is: How can I build the exe on my PC: 2007, but with GTA for Office 2000 Office?

  Thank you

  Paul

  Hello

  Thank you for your advice. Can you please tell me what you mean with the envelope vi? I don't really understand what you mean.

  Furthermore, I solved the problem. I discovered that the nodes invoke are updated based on the object library for the ActiveX control (in this case the MS Office). The data types are store in the msword9.olb (version 9 - for office 2000 in the Office folder) and msword.olb (version 12 - for office 2007 also in the Office folder). I tried to save the msword9.olb (using the regsvr32.exe) but it does not work for olb files - I need the ocx or dll. But, if I can replace the msword.olb since Office 2007 Office msword9.olb 2000 everything works.

  OK, measures that need to be made:

  1. install the GTA for Office 2000 on the PC

  2. DON'T change anything in the VIs.vi _Word_Dynamic. When Office 2007 is installed the VI arrow should be ventilated (error in VI)

  3 copy the msword9.olb for a system with Office 2000 (or your version) and copy it to your system with Office 2007 with the new name msword.olb. Are NOT FORGET to make a backup of the original file to MS Office 2007 and handing it to the end.

  4. once the new msword.olb is there, the VIs.vi _Word_Dynamic should be no error

  5. build your app exe

  6. restore the old msword.olb

  7. ENJOY your life!

  I hope that it is also useful for someone else.

  Paulie

• How to remove an old version of MSN (with the butterfly) and messages inside?

  I always use an msn address.  My desk top still shows an older version (with the butterfly) and when you click on this old old messages are there.  How to remove this version and messages.

  Hello

  Please refer to this article.

  How to uninstall the MSN Explorer software for my computer?

  http://answers.MSN.com/solution.aspx?SolutionID=115dc6c5-4ae7-4e38-8e0b-3eac07d020fa

  If you still have any questions, then contact msn support

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

  I hope this helps.

• Report Generation toolkit for labview 2010

  H all.

  I'm looking to download the 2010 labview report generation tool. When I proceed to download the Toolkit on the site of the national instrumnets, it says that I need LabVIEW 2011 or later in order to install it.

  Is there a version of this for labview report generation 2010 toollkit and can anyone provide a link maybe?

  Thanks for reading.

  Try this: [link removed, can be found on ni.com/downloads OR software downloads, the LabVIEW Report Generation Toolkit 2010 is available to customers with program Service Standard here: http://joule.ni.com/nidu/cds/view/p/id/3247/lang/en, other clients can communicate directly with NOR]

• Report Generation Toolkit missing VI

  LabVIEW version 8.6.1

  Report Generation Toolkit 1.13

  I just started work on an ongoing project that others have contributed to during some time.  (This is why the project being in older versions of LabVIEW)

  On my PC, apparently miss me VI "Word get ActiveX References.vi"

  I have the version 1.13 of the installed tool, just like all other machines running this code performs.  But my word.llb only contains VI

  I tried to copy just that VI in the .llb the VI is then found by the application.  But is not executable due to this error: this VI is related to a library that does not include the VI. The VI may have been removed from the library. ' Add the VI to the library or select file "unplug library.

  I also tried to replace my C:\Program NIUninstaller Instruments\LabVIEW all 8.6\vi.lib\addons\_office\ the directory with the files from a PC that worked.  Yet once, I get the same error as above.

  I tried to do a repair on my installation of the box tool.  But as far as I know, it did nothing.

  I also tried just reinstalling the Toolbox.  But since that it has been already installed, it did nothing.  I would hesitate to uninstall and reinstall the Toolbox for fear of breaking all my 8.6 projects, as well as perhaps my 2009 projects.  I don't think that he messes with my 2009 installation.  But I know the order in which things are installed can be critical in the system with several versions.  I don't know if this applies to tool boxes or not.

  This PC also has a LV 2009 SP1 installation, and this version also has the Report Generation Toolkit installed. (even if it is a different revision of the Toolbox as 1.13)

  I know that in the past, several versions of this toolbox were not compatible, which means that a single version of LabVIEW installed might have a job Report Generation Toolkit installed.  But I have been in agreement that it was no longer a problem.  Although it may not be a coincidence that none of the other boxes development runs this code are not installed LV 2009 have.

  Anyone who has encountered a similar problem and found a solution?

  Thank you.

  Before that we unified the version numbers of LabVIEW and toolkit (in 2009), there are cases where it has not changed the version number in the registry for one reason or another on a minor update.  So very well may have installed 1.1.4 and it can still say 1.1.3.  However, assuming that 1.1.4 has been installed, I can't imagine any reason why Word get ActiveX References.vi wouldn't be here.  VI lives at vi.lib\addons\_office\word.llb, so after installation from 1.1.4 to your folder of LabVIEW 8.6, check that the VI is actually there.

  D

• Oracle Forms and reports 10.2

  I have the Oracle CD since version 10:
  
  -Database Oracle 10.2
  -Suite of developer oracle 10.2
  -Tools of BI oracle
  
  What I want is to run an oracle application forms that we have developed in the past, but I don't have 'Oracle Forms and Reports 10' and I think that the OAS which comes with the BI tools is not enough to run the application forms. Is it? It's supossed that perhaps the server Oracle Forms and reports part is included in the oracle developer suite, but I can't. Do I need a CD full of OAS facility? can I have this version of Oracle Forms and reports
  
  Thank you very much

  I think that the basic version is still here:
  http://download.Oracle.com/OTN/NT/IAS/101202/as_windows_x86_forms_reports_101202.zip
  (for Windows).

• Tutorials Oracle Forms and reports

  Hi all

  I recently started a new job in collaboration with Oracle forms and reports using PL/SQL. I have little or no experience with either, I'm looking for some tutorials online. I found the following on Udemy me begin with PL/SQL - <-moderator removed link as we do to the business side--> but I find it difficult to find some tutorials on Oracle forms and reports. Can anyone suggest where I might find some good tutorials?

  Thank you

  -Action Moderator: removed link to a commercial side. The user don't please add links to commercial messages to any forum OTN in side. -----

  Tutorial Oracle...

  Although the first two of the following links are for older versions of forms, the concepts are still valid for all versions of forms.

  A tutorial on Oracle9i forms and reports

  http://www.holowczak.com/Oracle/dev9i/ iSelfSchooling - Introduction to forms Oracle Forms

  10g: demos, tips, and Techniques

  http://SheikYerbouti.developpez.com/index_en/

  http://www.SlideShare.NET/magupta26/Oracle-Forms-tutorial

  http://www2.cs.uh.edu/~ceick/3480/Customized_Oracle_Forms.pdf - create custom Oracle Forms

  http://www.youtube.com/watch?v=0BBiHvHzPYE - video

  Tutorial for Oracle reports...

  Here's some link...

  1. http://docs.oracle.com/html/B14364_01/title.htm

  2. http://www.scribd.com/doc/3960412/Basic2-Oracle-Reports-10g-Tutorials

  3. http://report10gsanamqa.blogspot.com/2010/08/triggers-in-reports-types-of-triggers.html

  Video tutorial

  http://www.YouTube.com/watch?v=Fum3MJm5yKU

  Hope this helps,

  Hamid

• Qosmio F60 - starting with Windows 7 and Dynadock U problems

  I recently acquired a new Qosmio F60 and a new port replicator Dynadock U. problem, but it will not start upward unless I disconnect the Dynadock by unplugging the USB cable from the laptop. I downloaded the latest drivers for the F60 and the Dynadock from Toshiba site without change to the problem.

  Also, the entire system in slow frustrating execution of orders despite the fact that the system's processor i7-based.
  I am running Windows Home Premium 64 bit version with Norton Security and have no innstalled unauthorized or unusual software.

  Any ideas?

  Hi Sandgroper,

  All other devices are connected to the Dynadock port replicator? Perhaps the external device is causing the Windows 7 startup problem

  Have you installed latest version of BIOS of Toshiba? As far as I know the new version came out a few days ago

  Check this box!

• Report Generation Toolkit compatibility with Microsoft Office 2013 and LabVIEW 2011

  Hello

  I design the 2011 Version of LabView to test solid state device and need to create test data after this unit tested.

  When I save the test data in the configuration of Excel after you run the Laview program, it created an error like "error - 41007 is is produced in NI_report.lvclass:New Report.v->... OR reports; Musr you have the LabVIEW Report Generation Toolkit for Microsoft Office installed to create this type of report. The musr toolkit also have an activated license or be in trial mode. »

  Questions: Do I need to install LabView Report Generation Toolkit for Microsoft Office on my computer? If Yes, what is the LabView Report Generation Toolkit for Microsoft Office Version. Where can I find this software?. I use Labview 2011, Windows 7, MS 2013 in the computer.

  Thank you

  Jonathan Tran

  You can try this: http://download.ni.com/evaluation/labview/ekit/other/downloader/2011RGT.exe

  From this link: http://download.ni.com/evaluation/labview/ekit/other/downloader/

• The SystemSettings.exe version 6.2.9200.16384 program ceased to interact with Windows and was closed

  Original title: can someone please help me Dell can not... The SystemSettings.exe version 6.2.9200.16384 program ceased to interact with Windows and was closed.

  Here is what I get when I try to download the Dell digital program.  I also can't use it either on the site to check my phone and nobody at Dell know what to do...

  The SystemSettings.exe version 6.2.9200.16384 program ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the control panel of the center of the Action.

  Process ID: cd8

  Start time: 01ce962cbf318c8a

  The termination time: 10

  Application path: C:\Windows\ImmersiveControlPanel\SystemSettings.exe

  Report ID: f1125230-0221-11e3-be6b-84a6c8d081a7

  Failed package name: windows.immersivecontrolpanel_6.2.0.0_neutral_neutral_cw5n1h2txyewy

  Flaws in the application related to a package ID: microsoft.windows.immersivecontrolpanel

   

   

  my laptop did not work properly since I got back from dell.  I also can't do a refresh of ore a reinstall then please to do not recommend do not.  I tried a clean to stall the disc, nothing... Help me please.

  Malinda

  Malinda,

  Try to create a media disc by following the steps in http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media

  If the problem persists, try to perform a refresh and check if that helps.

  Note: The applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

  Let us know the results.

• Report generation Exe error

  Hello

  I use LV 8.6.1 with report generation tool 1.13 and I'm having problems to make my exe built to work.  I try to open an excel template and fill it with new data.  I broke the vi downwards to open just excel - open the template and then fill out some data.  But at this point excel opens not at all.  And of course, everything works fine in the development environment.

  Error code:-2147352573

  Member not found in NI_ReportgenerationToolkit.lvlib:

  Excel_open_workbook.VI

  NI_Excel.lvclass: new reportsubvi.vi

  I read a few pages of help that says Add LVclass and \vi.lib\utility\NIreport.llb directories in project folder and add them to the always include section of the build.  But no luck so far.

  Aside: the machine I want to use it on a 8.6.1 full which does not have the extra excel functions available my developer.  Is it possible to install the DEV report generation tool in the full version?  Then I wouldn't need to build an exe file.

  UPDATE: I just tried the exe on another computer that has a suite of Developer installed and it worked fine.  So I guess I need to know what I need to add to the building to make it work.

  Make versions of Excel are the same?

  Microsfoft has improved the ActiveX interface for each version so that the old instance didn't connect.

  Tone

• VI LabVIEW Report Generation Toolkit elements in a TestStand sequence does not work with a LabVIEW 8.5 run-time engine

  Hi all

  I'm using LabVIEW 8.5.1 and TestStand 4.1. I did a sequence TestStand with a VI in this document, which uses items Report Generation Toolkit. On my machine I use LabVIEW and TestStand development system license. On another machine I use TestStand with basic deployment license and I chose the LabVIEW 8.5 run-time engine in the Configuration of the adapter. Everything works well except this VI with elements of Report Generation Toolkit. The error message shows that the VI is not executable. It works well only after I installed with a trial license and selected LabVIEW LabVIEW 8.5 development system in the Configuration of the adapter.

  I found other posts and a document in the knowledge base with a similar problem: http://digital.ni.com/public.nsf/allkb/8A0E6274D9BD7B1986256F62006AD402?OpenDocument but I am not no EXE files in my sequence, so I do not know how to fix mine. Someone has an idea?

  
  

• Cannot print on the Epson TM - U590 Slip printer Report Generation Toolkit with LabVIEW 8.6.1

  Hi all

  I have an application that uses the report generation tool to print tickets for a printer file.  Usually, it works very well - I 8 existing facilities where there is no problem

  I install the software on a new site that uses a printer Epson TM-U590 slip currently and I can't for the life of get me printing to work

  Using a Standard report, the Print Report.vi returns error-41002, indicating it does not find the printer.  I opened the VI using the remote debugging and it does not find the name of the printer properly with the available query Printers.vi.  It gets an error-2147352567 code starting from the printed node, which is then replaced by the de-41002 error that is reported.

  For historical reasons, I always use LabVIEW 8.6.1 for this project.  I plan to spend in 2011 or 2012, but I had some reliability problems with the other parts of the application after trying to upgrade to a new version of LabVIEW, so I would avoid it at this point.

  The application runs on a standard desktop with Windows 7.  The slip printer works fine if I print from Notepad, and my request is happy to print to any other printer, just don't slip printer.

  The slip printer using the LPT port.  Previously, printers of the folder that I used were USB but I expect the printer driver to hide the details of the application...

  Any ideas would be very appreciated

  See you soon

  Brett

  I managed to solve the problem, thanks to this article: http://digital.ni.com/public.nsf/allkb/67D60209102E2161862568AC0074BF64

  I now have the same problem with a folder of Star printer (a TUP592), this time with another program developed in LabVIEW 2011.

  As mentioned in the article, the problem is in fact to do with margin settings rather than the name of the printer, despite what says the error message

  After some tests, I received the Star printer to work by setting a large (> 14cm) right margin.  No idea why this is necessary because it seems quite happily print to the right edge of the paper, but there you go.

  So I don't have defintely solved the original problem yet, as I've not had back on the site, but I hope that it will be useful to someone else.

  See you soon

  Brett