Exe works on my computer, but not on others...

Similar Questions

• My Wired internet connection works on a computer, but not the other.

  I have a rope Ethernet connecting my cable modem to my laptop. When I plugged it in, it immediately connected my laptop to the internet. I took this same chord and plugged into my office. It connects, but I get a 'local only' connection and cannot access the internet. I tried all suggestions from windows to solve the problem. I reinstalled my network card. I played with all the internet options in Control Panel. How to make this work? It is clearly not the modem or the cable because it works on my laptop.

  I am running vista on my desktop.

  Hello

  Is that your desktop is configured to obtain an IP address from the DHCP server? Open the local area connection properties in your office and check the properties of the Protocol ' TCp/Ipv4. Be sure that this radio button for "obtain an IP address automatically" is selected.

  Thank you

  Girish

• My Nano Gen 7 is recognized on a single computer, but not the other

  My Nano Gen 7 is recognized on a single computer, but not the other.  I went through all the troubleshooting tips.  Different cables, try all USB ports, uninstall/reinstall itunes, etc.  I have itunes more up-to-date software.  I was able to connect the ipod to my backup computer and confirmed that I also have the software more up-to-date on the ipod.  Since I am able to connect to it, I also did a factory reset the iPod, but it still wouldn't connect to my main computer.  Nothing has worked.  I think there must be a setting on my pc.  I use the latest version of windows 10.  Any suggestions are welcome.  Thank you

  I just bought an Ipod Nano 7th generation and itunes does not recognize it.  Had by all the standard troubleshooting (uninstall/install itunes, etc.) and no luck.  My PC recognizes, he calls the 'nano' but acknowledges as a USB mass storage device.  I spoke to a support person from apple for more than an hour to help me troubleshoot it, finally they just said it was a windows problem, and I need to contact Microsoft.

• Why the HDR toning work with some pictures, but not for others?  I have CS6.

  I have Photoshop CS6 and when I go to HDR toning, it is only highlighted for work with some photos, but not others, why?  Thank you.

  HDR toning does not work with CMYK images. Change the RGB color mode, and then you will be able to use HDR toning. It also works with the color to grayscale mode.

• Help. Work with a Belkin router... works in the computer, but not by wireless... was fine until yesterday

  Until yesterday the relatively new router was working fine... However, he began to say that the password has changed and I had to click to renew (or repair), but everything I did it now only works if the cable is connected to the computer laptop and not by wireless... Help

  Hi Twentytwo22 (2),

  Thanks for posting that query you in Microsoft Communities. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You use a third-party security software?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  You can read this article for more information:

  How to reset the Protocol Internet (TCP/IP)

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• JavaScript works on one site, but not any other

  I have a javascript script to the copyright of my sites with the current year.

  It works very well on these:

  http://www.bringwowiehome.com/

  http://www.homephysiciancare.com/index.html

  http://www.whitakercdlsafety.com/

  but not on these:

  http://www.garegion2ems.org/

  http://www.amerimedems.com/

  http://www.amerimedmedical.NET/

  And for the life of me, I can't understand why

  Help, please?

  Where it doesn't work, change-

  Karen Moody ... © all rights reserved

  on this subject.

  Karen Moody ... © all rights reserved

  See if that helps.

• My filter (for ads) works for some shippers, but not for others

  I have several filters. One is "Advertising" for ads I want to read later, but need not be cluttering up my Inbox. It seems to work for a couple of the entries but ignores the rest. I checked the spelling, and they all seem to be correct. My settings are:
  Apply filter by operating manually,
  Apply the filter when getting new messages, filter before spam classification,
  correspondence to one of the following values
  Contains (followed by the name of the seller, such as honda, staples, cvs).
  Move messages and ads

  This is a support forum for Firefox. You will need to contact your
  e-mail assistance provider.

  The filters have all send your 'junk e-mail' folder, but the implementation
  a list of 'safe' for those that you want.

  Separate the issue;
  Shows details of the system;

  Plug-ins installed

  Adobe Shockwave for Director Netscape plug-in, version 12.1.2.152
  Adobe Shockwave for Director Netscape plug-in, version 12.0.3.133
  
  Having multiple versions of a program can cause problems.
  You must remove older programs. Then download the current full installer.

  Shockwave Director:
  Shockwave Standalone install / Uninstaller {web link}
  Shockwave Director Version 12.2.1.171 http://get.adobe.com/shockwave/

• Clubhouse 23 HP: HP Officejet Pro 8600 is offline to a computer, but not the other

  In our office network, we have problems with printing. We have several computers set up in the network and all print on the same printer, our HP Officejet Pro 8600. However, you can print from all except one. It reports an error in offline mode. Usually, rebooting the computer and the printer solved that problem, now, is not the case. I uninstalled the printer, reinstalled and it worked temporarily. I also disconnected from the network to the printer and the computer and reconnected them both. I have also shut down the computer, the printer and the router and restarting their router, printer, and then computer. I still have the same problem with just a computer. Any help would be greatly appreciated.

  I solved the problem on my own. I had to remove all the devices on the network printer and reinstall on all devices.

• Code works on an image, but not the other

  I have 2 images in my film, 2 buttons and a video.  On the first image, there is code button #1.  On the second picture, I code button #2, but I also want to appear on the first image. The problem is that when I put the code for the second button on the first image, the video will not play.  If I can have it only on the second image.  I can't understand why the code that works when its framework on 2, then will not work on frame 1.  When I put the code on frame 1, it breaks the functionality and the video will not play.

  This is the code on frame 1, button #1 (btn_skip):

  Stop();

  btn_skip.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage_2);

  function fl_ClickToGoToWebPage_2(event:MouseEvent):void

  {

  navigateToURL (new URLRequest ("http://www.brokerschoice.com/Black_Vault/innervault.html"), '_self');

  }

  Import fl.video.MetadataEvent;

  mymovie.addEventListener (MetadataEvent.CUE_POINT, fl_CuePointHandler_2);

  function fl_CuePointHandler_2(event:MetadataEvent):void

  nextFrame();

  This is the code on frame 2, for the key #2 (btn_skip): this code works if I put it on the frame 2, but breaks the video if I put it on frame 1. I need to have this code on frame 1 as well.

  btn_homePage.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage_3);

  function fl_ClickToGoToWebPage_3(event:MouseEvent):void

  {

  navigateToURL (new URLRequest ("http://www.brokerschoice.com"), '_blank');

  }

  Thank you

  If it were true you wouldn't have a double function error.  Alternatively, the error is not related to what I proposed.

  in any case, fix it if you don't have two names of the same functions.

• Form validation works on a page, but not the other...

  Hope someone can help with this.

  I have a page below with a load of contact forms that all work well:

  http://www.goodsafariguide.com/judges/judges.php

  I have corrected to re-create (it is true that for the most part by Save under...) same features here:

  http://www.goodsafariguide.com/AwardsSite/judges/

  They do not work when trampled in correctly, but there is a little problem with validation.

  Basically when you complete a form properly, the page reloads with accordion of the closed form. When you open it upwards, his watch the ugly error in the search at the top of the form.

  Any ideas what is causing to act like that, as opposed to the way it works in the first link?

  Thank you.

  Iain71 wrote:

  ....

  I have corrected to re-create (it is true that for the most part by Save under...) same features here:

  http://www.goodsafariguide.com/AwardsSite/judges/

  They do not work when trampled in correctly, but there is a little problem with validation.

  When you look at the source code, I emphasize that - unlike the first page - this a doesn´t contain all references to uninstall form validation libraries ("... / includes/tng/scripts/FormValidation.js"and"'... / includes/tng/scripts/FormValidation.js.php '), which means that the work of can´t of validation.

  See you soon,.

  Günter

• I have my complete history on my old computer, but not my other or by phone

  title. I booted up my old pc because I was frustrated after spending hours looking for something on my phone, computer and web app for Skype anywhere is. everything goes back only a few months, but my old pc goes way further. How can I get my old story on my other devices?

  You must migrate a copy of your file of ancient history (main.db).

  https://support.Skype.com/en/FAQ/FA392#4

• Can access folder on a computer, but not the other

  I have a vista computer that has a folder that I want to join.  I have 2 computers newly built win7.  I can access the folder on the vista computer with win7 computers only.  I went through everything I can think of and all settings appear to be identical between the two platforms of win7.  I took a peek in the management of the computer sessions and my computer with win7 I can't access it from is listed as a guest, not my user name.  I have no idea why, all the comp have same login name, password and admin access.  I have disabled guest accounts.  It's the only thing I can find different between win7 computers which could explain why I can't access the folder in question.

  Anyone know how I can transfer my network setting win7 rig with access to the other without, or fix everything that's wrong with my access rights so that I can get the folder I want?  I can see the drives and folders that I shared.  I can not open them, I get one you don't have permission to access this folder message.  I have everything I can find associated with sharing turned on (except the password) and everything related to the firewall disabled is trying to access.

  Thanks for the pointers you can give me.

  Hi Dave68_31,

  This could be a problem with the permissions of files and folders.  The following procedure will help you change the owonership and permissions of files and folders.

  1. right click on the file or folder, click Properties, and then click the Security tab.

  2. click on Advancedand then click the owner tab.

  3. click on Editand then do one of the following:

  o to change the owner to a user or group that is not listed, click other users and groups , in area enter the object name to select (examples), type the name of the user or group, and then click OK.

  o to change the owner to a user or group that appears in the area of change of ownership to , click the new owner.

  4. If you want to take ownership of the contents of the folder, select the checkbox replace the owner of sub containers and objects .

  5. click OKand then click Yes when you receive the following message is displayed:

  You are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?

  All permissions will be replaced if you click Yes.
  
  Note folder_name is the name of the folder you want to take charge.

  6. click on OKand then reapply the permissions and security settings that you want for the folder and its contents.

  For your Information

  Ø an administrator can take ownership of any file on the computer.

  Ø assignment of ownership of a file or folder can require that raise you your permissions using user access control.

  Hope this has been helpful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Software works for the administrator, but not for other users.

  I installed the software on a Vista laptop this morning as an administrator.  Software works perfectly under administrator.  When you sign in as a user, the program opens but cannot perform functions due to read/write permissions. It crashes the program.  When you look at the folder where the program and data are stored - this user seems to have all the permissions.
  Because it appears that the user has full rights to the folder where the program is located, is there another place that a setting needs to be adjusted?  Is there something about "inherited" permissions of the user miss them us?
  Can you provide steps for the opening of this user account?

  Hello

  You get the error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest you to follow these steps and check if it works:

  a. right click on the program.

  b. click on run as administrator.

  Method 2:

  See the article and check if that helps.

  What to know before applying permissions to a file or folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-know-before-applying-permissions-to-a-file-or-folder

• @HspNthMbr work in an application, but not the other

  Hello

  I want UDF @HspNthMbr, it was first recorded in a single application, so I copied into another application where I want to use.

  I copy in environmental assessments, after the copy, write a very short script as below. When I hit the check button it throws below error msg. I tested this script in the original application, it worked fine. I also tried to register instead of copy, the result is the same. Can someone help please?

  Error: 1200471 error analysis formula [statement of DIFFICULTY] (line 1): expression expected before [)]

  / *-Script-* /.

  Fix (@Member (@HspNthMbr (@Name (@relative("YearTotal",0)), 1)))

  "No account" = 1;

  ENDFIX

  -----

  Update: I noticed in the ESSBASE newspaper, after that I have copy the function from one application to the other, he appeared to be Ok enter the 2nd application, what else must be done after copy and which could have other reasons?

  Pls help and thanks in advance!

  HSP functions considering specific custom functions, so if you use it on another planning application, then you will have to refresh custom functions from screen updating of database planning.

  If you try to use it on an application for Essbase, I doubt that a copy is not going to work. (Not sure that you are allowed to copy these CDFs on Essbase application)

  Concerning

  Celvin Kattookaran

• SharePoint Web site only works in Internet Explorer, but not in other browsers.

  Original title: Sharepoint Web Site only works in Explorer.

  I reorganized just a Web site using Sharepoint Designer.  It looks FANTASTIC in the Solution Explorer.  However, it is completely RUINED for all other browsers.  Help!  How can I fix?

  There is a specialized due to Sharepoint forum.

  I suggest that post you in the Sharepoint forums because they have experts there who would be better able to help you.
  http://social.msdn.Microsoft.com/forums/en-us/category/SharePoint/

  Sincerely,.

  Marilyn