@HspNthMbr work in an application, but not the other

Similar Questions

• My Wired internet connection works on a computer, but not the other.

  I have a rope Ethernet connecting my cable modem to my laptop. When I plugged it in, it immediately connected my laptop to the internet. I took this same chord and plugged into my office. It connects, but I get a 'local only' connection and cannot access the internet. I tried all suggestions from windows to solve the problem. I reinstalled my network card. I played with all the internet options in Control Panel. How to make this work? It is clearly not the modem or the cable because it works on my laptop.

  I am running vista on my desktop.

  Hello

  Is that your desktop is configured to obtain an IP address from the DHCP server? Open the local area connection properties in your office and check the properties of the Protocol ' TCp/Ipv4. Be sure that this radio button for "obtain an IP address automatically" is selected.

  Thank you

  Girish

• Code works on an image, but not the other

  I have 2 images in my film, 2 buttons and a video.  On the first image, there is code button #1.  On the second picture, I code button #2, but I also want to appear on the first image. The problem is that when I put the code for the second button on the first image, the video will not play.  If I can have it only on the second image.  I can't understand why the code that works when its framework on 2, then will not work on frame 1.  When I put the code on frame 1, it breaks the functionality and the video will not play.

  This is the code on frame 1, button #1 (btn_skip):

  Stop();

  btn_skip.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage_2);

  function fl_ClickToGoToWebPage_2(event:MouseEvent):void

  {

  navigateToURL (new URLRequest ("http://www.brokerschoice.com/Black_Vault/innervault.html"), '_self');

  }

  Import fl.video.MetadataEvent;

  mymovie.addEventListener (MetadataEvent.CUE_POINT, fl_CuePointHandler_2);

  function fl_CuePointHandler_2(event:MetadataEvent):void

  nextFrame();

  This is the code on frame 2, for the key #2 (btn_skip): this code works if I put it on the frame 2, but breaks the video if I put it on frame 1. I need to have this code on frame 1 as well.

  btn_homePage.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage_3);

  function fl_ClickToGoToWebPage_3(event:MouseEvent):void

  {

  navigateToURL (new URLRequest ("http://www.brokerschoice.com"), '_blank');

  }

  Thank you

  If it were true you wouldn't have a double function error.  Alternatively, the error is not related to what I proposed.

  in any case, fix it if you don't have two names of the same functions.

• Form validation works on a page, but not the other...

  Hope someone can help with this.

  I have a page below with a load of contact forms that all work well:

  http://www.goodsafariguide.com/judges/judges.php

  I have corrected to re-create (it is true that for the most part by Save under...) same features here:

  http://www.goodsafariguide.com/AwardsSite/judges/

  They do not work when trampled in correctly, but there is a little problem with validation.

  Basically when you complete a form properly, the page reloads with accordion of the closed form. When you open it upwards, his watch the ugly error in the search at the top of the form.

  Any ideas what is causing to act like that, as opposed to the way it works in the first link?

  Thank you.

  Iain71 wrote:

  ....

  I have corrected to re-create (it is true that for the most part by Save under...) same features here:

  http://www.goodsafariguide.com/AwardsSite/judges/

  They do not work when trampled in correctly, but there is a little problem with validation.

  When you look at the source code, I emphasize that - unlike the first page - this a doesn´t contain all references to uninstall form validation libraries ("... / includes/tng/scripts/FormValidation.js"and"'... / includes/tng/scripts/FormValidation.js.php '), which means that the work of can´t of validation.

  See you soon,.

  Günter

• SWF is MIA on a field, but not the other?

  I have a modest Web page which I use primarily to set up the occasional photograph of the family:
  
  http://www.staggclan.com
  
  .. .and that contains a Flash xreferencing file a Flash video. That's what it is supposed to look like: http://www.dfwaug.net/test/index.html.
  
  As you can see - the video works very well in this last example (it's the same hierarchy). But why don't you see the video on my site? You can take a look at the source for staggclan.com on this page and you can see that I'm NOT xreferencing my hard drive and I am referencing an image that has not been downloaded (although I was - you would see at least one indicator 'broken image'). It does not even include space for where this video should be - it's as if he was not yet placed there.
  
  For the life of me I don't know what the problem is. Why is - that will work in a field, but not the other (both hosted by 1 & 1. com)? One who can correctly solve this problem for me will find me ETERNALLY THANKFUL.
  
  All the best.
  
  

  I'm just using DW8 to insert this .swf on a page. Obviously, I had deleted by mistake the "Scripts" folder is published with the course when I put on my server - so - no multimedia.

  Its a long time I have been using DW since now, we mainly use eLearning software rapid development. Gawd how I miss DW. Fortunately, I get to 'play' with it from time to time on the home front and have since updated my 'official' home-homepage which is now showing the video correctly:

  www.staggclan.com

  It was certainly a learning experience...

  Kevin

• Just got 2 of SE. Weather app works on one but not the other.

  Just got 2 of SE. Weather app works on one but not the other. Ideas?

  Drosea,

  Define/describe does not.

  What's the weather App?

  

• My Nano Gen 7 is recognized on a single computer, but not the other

  My Nano Gen 7 is recognized on a single computer, but not the other.  I went through all the troubleshooting tips.  Different cables, try all USB ports, uninstall/reinstall itunes, etc.  I have itunes more up-to-date software.  I was able to connect the ipod to my backup computer and confirmed that I also have the software more up-to-date on the ipod.  Since I am able to connect to it, I also did a factory reset the iPod, but it still wouldn't connect to my main computer.  Nothing has worked.  I think there must be a setting on my pc.  I use the latest version of windows 10.  Any suggestions are welcome.  Thank you

  I just bought an Ipod Nano 7th generation and itunes does not recognize it.  Had by all the standard troubleshooting (uninstall/install itunes, etc.) and no luck.  My PC recognizes, he calls the 'nano' but acknowledges as a USB mass storage device.  I spoke to a support person from apple for more than an hour to help me troubleshoot it, finally they just said it was a windows problem, and I need to contact Microsoft.

• Flash Player crashes a pc but not the other

  I have two PCs each running xp sp3.  Players of Flash in Chrome and Firefox crash one of them, but not the other.  Obviously something is different between the two computers, but how can I evenbegin to understand what he.  I've seen a lot of posts on Flash crash peoples computers and no satisfactory answers to my problem.  Thanks for responding.

  First thing to try on the computer crash is to disable hardware acceleration (http://forums.adobe.com/thread/891337).

  If this resolves the problem, then you should update the drivers for your graphics card (and re-enable hardware acceleration).

• Why the HDR toning work with some pictures, but not for others?  I have CS6.

  I have Photoshop CS6 and when I go to HDR toning, it is only highlighted for work with some photos, but not others, why?  Thank you.

  HDR toning does not work with CMYK images. Change the RGB color mode, and then you will be able to use HDR toning. It also works with the color to grayscale mode.

• Audio in a timeline yet, but not the other?

  Hello

  I am trying to solve a problem in a timeline yet for Blu - ray with a MPEG2 and AC3 file.  It's weird because with the exact specifications of the same file for the video and audio, I'm able to hear the audio from the test project calendar (short term), but not the project calendar full length (about an hour and a half in duration).

  I'm burning a disk to verify that audio is just not there, rather than a problem reading with the project any longer, but can anyone suggest what may be broken here?  Again, the two projects seem to be identical in the parameters and specifications file for the video and audio, only the duration of a (work) is shorter than the other (does not).

  The audio file has been posted outside still like audio playback.

  Thank you for all what thoughts - what someone might have here.  BTW, the project has no menu screen.  That's a 'read only' Blu - ray disc

  Mtbakerstu

  That shows the status of transcoding of comics for each importing audio?

  Confirm that it is import and not dynamic link.

  How do you know that the file specifications are identical?

• Remove all applications, but not the settings

  I would like to delete applications off iPad to my kids, but keep the settings. As a result of bad choices, they lost the use of the device for a month with the exception of a few applications of education. Because the device has more than 200 applications, I'm trying to understand if there is a relatively easy way to remove all applications (I can reload education ones), but all the settings I have for the device. I backed up the iPad and thought that I could restore all applications after their months of purgatory. Any ideas or suggestions on how to do it quickly?

  No, there is not. Unless you're willing to wipe both parameters, applications will have to be deleted individually. However, with 200 apps, it could be easier to wipe and reintroduce the parameters.

• Why: print from a user account, but not the other?

  On a computer, we have two user account: an admin mastering (Bev), the other without (BevsGuest).  Note that this is not 'the' guest account.

  We have no printing problem on behalf of Bev.  But we cannot print from the BevsGuest account.  Sorry, but I forgot the error message we get.  But we receive the error of several applications - Excel, Word, Google Maps, etc.

  This who should I seek to explain the problem?

  I'm sure that's enough information for someone to propose a specific solution.  And I cannot possibly answer follow-up questions because I'm away from the computer at 400 miles at present.

  I'm looking for simply advice.  I'm not familiar enough with the Windows o/s to find out how this could happen.

  My WAG is: it's a permissions problem.  But if this is the case, I don't know where to look for the permissions property, which may be the cause of root, let alone how to fix it.

  The problem started a few times in a few months; He worked many years.  I can't say exactly when the problem started, or what has changed in the meantime, because: (1) I use the computer only every few months. and (2) someone else maintains the computer, for example to install Windows updates.  Not to say that this person could have; but usually it is very minimal.

  The computer is located in a private residence, not not part of a corporate network.  Is there any other computers.  The printer is wired, not wireless.

  I could try to roll back to a system restore point.  But it would be a shot in the water, and I'd rather make minimal changes.

  Hello

  ·         Who is the manufacturer of the printer and what is the model?

  I suggest to create a new user account and check if you are able to print from this account or not.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

• My filter (for ads) works for some shippers, but not for others

  I have several filters. One is "Advertising" for ads I want to read later, but need not be cluttering up my Inbox. It seems to work for a couple of the entries but ignores the rest. I checked the spelling, and they all seem to be correct. My settings are:
  Apply filter by operating manually,
  Apply the filter when getting new messages, filter before spam classification,
  correspondence to one of the following values
  Contains (followed by the name of the seller, such as honda, staples, cvs).
  Move messages and ads

  This is a support forum for Firefox. You will need to contact your
  e-mail assistance provider.

  The filters have all send your 'junk e-mail' folder, but the implementation
  a list of 'safe' for those that you want.

  Separate the issue;
  Shows details of the system;

  Plug-ins installed

  Adobe Shockwave for Director Netscape plug-in, version 12.1.2.152
  Adobe Shockwave for Director Netscape plug-in, version 12.0.3.133
  
  Having multiple versions of a program can cause problems.
  You must remove older programs. Then download the current full installer.

  Shockwave Director:
  Shockwave Standalone install / Uninstaller {web link}
  Shockwave Director Version 12.2.1.171 http://get.adobe.com/shockwave/

• Windows can't access\\ when you go to windows xp, but runs between xp to vista and 7, but not the other dirrection

  Cannot access xp vista or 7 but works the other way around. Can ping all machines and see all the machines in my network places. Help! Thanks I JUST TRIED FOR THE TWO LAST DAYS

  No, this wasn't it. But I found it. When I was checking the user name user accounts is plural on the XP machine and not on other machines.  So I renamed the discovered XP username is a no. Created a new user name that match the others to check out and everything works. now, I just copy the profile of the plural name account to the new account. I want to thank everyone for their help.

• C6350 printing from a laptop, but not the other

  Hi, I have a new HP Photosmart C6350 which was working fine until today. I connected via the network from my wireless for two two laptops running vista 64. All of a sudden I can't print from a laptop computer but can print fine on the other. With one that does not initialize the print job, and then a minute later, it says "Unable to print Document" when I open the HP Solution Center, it says "work has not print because of an error in the printing system." The laptop is able to communicate with the printer, it can check the connection settings, get ink levels, scanner works very well, etc., but never print jobs is completed.

  I tried to turn on/off the printer several times, I rebooted my laptop several times and it has not solved the problem. I checked the edits, and he said that everything was up-to-date. I tried all the solutions suggested and don't know what else to do. As I said, it worked fine til today. Help, please

  Too bad, solved with the help of cat online hp