execution of ADLDS reconciliation work in IOM

Similar Questions

• data execution prevention and MS Works

  I run a MS 2002 program works or has been.  Whenever I try to open it it stops because of the dep I don't remember whether I used it successfully on this computer.  I bought this model in 2009 and before that was running Windows XP now is Vista premium edition.

  You will need to enable it by changing the DEP settings.

  See: http://social.answers.microsoft.com/forums/en-us/vistasecurity/thread/8E73FCE8-CEDE-426F-851F-EF26A2ADDA71

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settings

• Custom EventHandler does not update the reconciliation work in 11g r2

  Hello world

  I have three users of post process change custom eventhandlers.

  These eventhandlers works entirely success when I change all attributes on change screen.

  But these eventhandlers does not work after update of reconciliation (update succeeded).

  Why update eventhandlers does not work after reconciliation?

  Thank you.

  Best regards.

  Operations that use "Public BulkEventResult run (long arg0, long arg1, arg2 BulkOrchestration)"? --> Updates block as if you select more than 1 user in the advanced search and select the bulk edit options.  Also the reconciliation events to use it even if it is a single user.

  Operations that use "Public EventResult run (long processId, long eventId, orchestration of the Orchestration)"? --> Put attributes through the user interface when you save a user.

  -Kevin

• Reconciliation of the IOM is not updating after adding custom fields

  In Oracle Identity Manager 11.1.2 with connector

  Connector for Oracle Internet Directory version 11.1.1

  I close the IOM LDAP users, and after I add custom fields for the reconciliation of the target, and I try to update these users with the new event of reconciliation return of custom fields, this new custom fields poster in case page of reconciliation and not in the form user to LDAP.

  I already create the new form with the news of the custom fields associated with the application Instance.

  Solution:

  CVF (form Version Control Utility) comes with IOM that updates the form associated with existing users.

  With the help of the form Version control utility - 11g Release 2 (11.1.2)

  OR

  
  

  Update PROCESS_FORM_TABLE set PROCESS_FORM_TABLE_VERSION =(select SDK_ACTIVE_VERSION of the SDK where SDK_NAME = 'PROCESS_FORM_TABLE'); COMMIT; NOTE: Replace PROCESS_FORM_TABLE with process form real that is 'UD_XXX '.

• Reconciliation of the IOM

  Hi all
  
  IOM is supplied to AD and Exchange and I can't see the resource information in modules of resources through the IOM web console. There he shows two resources as implemented. But after reconciliation, a line of resources more Exchane showed information on the User Info page. (I think, IOM established a link to Exchane for the same user). Rule Exchane Recon is how ever UserLogin = samAccountName
  
  But in this case, userlogin = 1234 and samAccountName = i1234 (the two are not equal). Then how her be reconciled and the link with the same user.
  
  Please suggest me. I have to stop the construction of this single resource exchage more for the same user.
  
  Kind regards
  G. love

  There will be no problem as long as the resource points to the correct information of the target and the connection.

  -Kevin

• Instrunment: Works to "Highlight the execution", but does not work in an ordinary execution

  First of all how can I copy and paste of LabView code for the forum? I just do ctrl + c and paste it into the section "insert code"? If so, I tried to do that and it didn't work, would it because I am using a trial version?

  Come to the main point, I take medium-sized measurements of a multimeter. With the while loop measures in its own code snippet, it works but when I try to put it together with my original code I get this error:

  Reference not found: (xBFFC0012) Impossible to extract data from user for the given resource name as there was no data in the name of the resource.  Before you can read the data, you must write the data of the user by using the action to write data of this user data VI.

  However, when I run with 'Performance to highlight', I get an error. Anyone know what could be the problem or how to fix?

  Thank you

  William

  

  Hehe, now that I have started working on it. I have the problem that you have highlighted.

  I changed my program leaving the VISA section find resource as a stand-alone section then made a structure for the part of the measure of the event.

  

• Execution of a procedure - work on Isql Plus but not SQL Developer?

  Hi people.
  
  I'm playing with some stuff and design the structure, mostly just passing values autour procedures. I have a (procedure1) procedure which takes a sysdate and then switches to another (procedure2) procedure that accepts the parameter and done a dbms_output.put_line.
  
  The two objects are valid and compile correctly. I use
  
  exec procedure1;
  
  with iSql more and it works perfectly. It prints the output and any dates.
  
  However if I use exactly the same command in SQL Developer it gives me the error "ORA-00900: invalid SQL statement.
  
  I do not understand why this is happening? The code runs perfectly in one but not the other...

  Remember that SQL * most orders do not work in the spreadsheet. So, that would be

  exec my_proc
  

  In the worksheet, you must declare an anonymous block...

  begin
      my_proc;
  end;
  /
  

  If you right-click on the procedure in the browser and select run, then SQL * Dev will throw up a harness for you. Very convenient if you want to get DBMS_OUTPUT, variables defined, etc..

  Cheers, APC

  http://radiofreetooting.blogspot.com

• Reconciliation of the AD to the IOM

  Hi all

  I have a scenario where I want to reconcile the user of the AD to the IOM.

  I have configured the user of the IOM to AD(ou=test,dc=example,dc=com). Now, I moved the user to the OU = organizational unit test = test1. Now, I have to reconcile the changes to the user in the AD. THEN can I do this. I create test1 org in IOM? or simply short work of reconciliation in IOM will wor? Any help will be appreciated.

  Thank you

  ~ SS

  Hello

  There are two kinds of reconciliation to the IOM.

  (1) target system-> it just updates the process (form AD process in your case)

  (2) system secure-> This updates / create users in IOM (the user's profile, so I think that you do not use)

  So, if updated recon of the target system, you just need to run 'recon OR Lookup' first and then run target recon user task. It will update to the OU that is appropriate in the form of AD process. It won't change anything in the user profile of the IOM.

  HTH,

  ~ J

• IOM: Reconciliation with the Tables of database applications connector

  Hello!
  
  I am using the Application Connector 9.1.0.5.0 database Tables in OIM 11 g to reconcile the accounts of my target system: MySQL 5.1.37. I followed the steps described in the guide of the connector to create and set up and configure my system target as a reliable source.
  
  The problem is that user accounts are not created in IOM, however, I know the Connector retrieves the information of every user because I can see it in the log messages generated when I run the reconciliation work, so I supossed the problem may be in the "configuration of the connector to modify page", or some time after that.
  
  In addition, I don't know if it's important, but I don't see "User of Type" field "IOM user account data set" to "change the Connector Configuration Page.
  
  A I forgot to do something in the configuration or there's something I've had to do but the steps described in the guide?
  
  Thanks in advance!
  
  Published by: user10857411 on January 11, 2011 16:10
  
  Published by: user10857411 on January 11, 2011 16:12

  SUN IDM is better than the IOM
  Reconciliation process in Sun IDM (newest oracle) is easier to implement than IOM (worst solution identity)

  Saludos cordial Zam

• VI crashes but highlight execution works without error

  I designed a VI for my business and unfortunately I can't post any code due to the nature of the project.  However, I developed a VI that works with a Lua script, communicate in a way hand-shake-accused of receiving over TCP.

  Basically I have a typical State Machine that goes around where the main report for a TCP command, then once, he gets one, the Lua script waits for a response than the finished LabVIEW acknowedging.  Then the LabVIEW waiting again for another command.  It just goes back until I get out.

  When I run the VI with my script, it crashes.  I see no error message or anything. the LabVIEW program ends completely.  However, if I use the execution to highlight, it works 100% as planned and I can't visibly see all problems.  I also ran through the entire program, using "Step-Through" and who also worked 100%.

  I tried to get the information from 'error', but there is none.  If I run this, it just completely stop LabVIEW on crash with no notifcation at all.  If I run it using one of the methods above, the error Out reported no errors.

  I use not all local variables, or anything that might cause a race condition (to my knowledge).  Except wait for a command by sending one to the end, the code works sequentially and even the communicaton is relatively sequential (since both programs block / busy wait until they receive the order).

  Does anyone have any additional suggestions on how can I debug this problem?

  Looks like that it comes with Developer Suite 2009.

  Do not attempt to teach you to suck eggs here, but you can strip enforcement up to the bare bones to try to isolate the problem.

  Keep the feature to cut until it no longer hangs and then build up until the problem reappears to try to limit.

• SAP ER progressive reconciliation - current state = data received

  Hello
  We use the connector SAP ER for SAP HR Trusted Source of reconciliation.
  
  Full reconciliation works, so we went to a progressive reconciliation.
  
  The IOM job named "SAP HRMS Listener" is enabled and active (in other words, what IMO is listening on the TRFC Port of SAP HR system).
  
  Question: when the SAP administrator hire an employee on the system SAP HR, IOM correctly receive the transaction (which means the communication between the work of SAP HR and IOM as exceptees) and create a new event of reconciliation, but this event remains "open" without error and with current state = received data.
  
  Note: no messages in the weblogic_oim.log file and no error in oim_server1 - diagnostic.log.
  
  Kind regards
  Gabriele

  Hi Gabriele

  Check the property of lot size system. Only after that the number of events reaches this number, your recon events will be processed.

  Please run the scheduled task "Unplanned Recon batch" to deal with the events of recon immediately.

  Let me know the results.

  Concerning
  user12841694

• Create a unique reference in step custom type to store execution

  I'll explain what I try to do first...

  I am trying to create a type of step (in combination with a call from sequence) that creates a new run.

  I want to keep the performance created in a reference object so I can send it to a user interface uiMsg screws.

  To allow maximum flexibility for developers using the step type, I'm doing any 'magic' when they insert the new type of step (creating Ref obj variable using substep OnNewStep, sending the uiMsg, etc.).

  I'm having a problem to the obj variable. I want to create with a unique name so they add the step type every time, it is not in conflict with another variable name. I well using the Step.TS.ID for the name of the variable, but I realized that some IDs contains the characters ' / ', ' # ' or ' + '. These characters are not accepted by TestStand to a variable name, but it seems that we do not get the error when we create the programmaticaly. It actually creates the variable with the ID name: #12243 + 12/asdf for example.

  When I use the Locals.GetPropertyObject ("The executions." + Step.TS.Id, 0x00) as a reference to store execution, it does not work.

  When I add the sequence step, Ref obj is properly created as expected (Locals.Executions. * stepID *).

  But the reference is never stored in the variable expected. It is stored instead of Locals.__SC_Executions.ID_ID #AIrDBpzuUuukUYrRX1gGC.

  I do something wrong or do you think that any another way to do this? I've included an example as an attachment. Thank you.

  PS: I tried to delete the first 4 characters of the step ID (ID # and I tried with an ID of the containing step only letters or numbers and it did not always work.) If illegal characters are used to name the object Ref may not be the problem

  Mast-

  Instead of: Locals.GetPropertyObject ("The executions." + Mid (Step.TS.Id, 4), 0x00)

  Use: Evaluate ("Locals.Executions" + Mid (Step.UniqueStepID, 4))

  The __SC_Executions container is automatically generated by TestStand to be used for other things and has nothing to do with the local variable that you set.

  I hope this helps.

• is that we can perform the tasks of the IOM on demand in Autosys

  Hello

  Autosys team was checking with us if they can perform the work of IOM in Autosys?

  Thank you

  IOM uses its own scheduler for scheduled tasks, and it is not designed to be run using an another Planner.

• How to remove old objects of IOM resource

  I work with IOM Version: 9.1.0.1866.70 and I have recently said that we will not use a certain object of resources more.  I have watched and traversed the console design but I don't see any option to remove a whole resource.  Is it still possible to delete a resource of OIM?  I can turn off Auto down but our many admins provisioning will always have the possibility to grant the deceased resource.  Is it available in a future release of OIM?
  

  If you change the type of the object system resource, it will be more visible from the user interface for commissioning.  You must also remove it from any of your access policies.  If you really need to retire.  I suggest that you assign auto complete a task on your function to remove and revoke all your users of it.  If the resource will exist always, but no new users should get it, scoring as a system resource should be enough then will always trigger events of life to existing users.

  I wouldn't through the connector to uninstall your production.  If any other object present coins in use, uninstall will worry not about that and then other your workflow will be broken due to missing parts, but you get no warning.

  -Kevin

• Error occurred during the creation of profile of reconciliation

  Hello

  I develop connector ICF for Gemalto Ezio server and when I tried to recreate the profile of reconciliation, this action ends with the error: "error has occurred, creating profile: profile: user DS3: ITResource mapped attribute type undefined". ""

  My connector uses only a few attributes:

  UD_DS3_USR_UID	String	32	ID of the user	TextField		2		0
  UD_DS3_USR_TOKENSN	String	32	SN token	TextField		4		0
  UD_DS3_USR_PASSWORD	String	32	Password	PasswordField		3		1
  UD_DS3_USR_RETURN	String	32	Return the ID	TextField		5		0
  UD_DS3_USR_SERVER	long		Server DS3	ITResourceLookupField		1		0

  And I have these fields in the profile of reconciliation of the object:

  Status [String]

  ID of the [String] user, required

  Token SN [String]

  Name of resource COMPUTING [String]

  Action of reconciliation rules are:

  No matches found	None
  A single entity match found	The link
  A successful match process	The link

  Please, how can I fix this error? What's wrong? What type of ITResource is not defined? What it means?

  Thank you

  Milan

  Finally, the change of name of TI resource [String] on behalf of the resource [resource] IT solves my problem.

  Reconciliation works fine now