T410s - Ultrabay Battery and locking issues

OK just - my new newegg.com ultrabay battery:

http://www.Newegg.com/product/product.aspx?item=N82E16834994268

is having intermittent problems. I will list out them:

  • Connect the questions of recognition.
  • Wake up sleep (as HERE)
  • Charge of issues - it is stuck at 18% now and does not load!

To explain more. When I got the battery that I plugged it in and the system immediately recognized and began to charge. I have let it charge all the way up. I used it for say 30 minutes on battery which worked as expected. The battery of the UB exhausted up to 70% or something and put it to sleep. When I woke up the machine (the cover) the battery ejected, and whenever I have it plug back, said he is ready to be removed. To resolve this problem, I have to restart or sleep again then he semi works.

Now it to something else - it shows as connected but still drains the MAIN battery and not the UB even if she is charged. When I remove the main battery and boot the system with just the ultrabay battery starts to beep at me (like beep beep beep beep as no stop). It is always powered of course and shows always have a battery.

Now even when I plug (adapter 65W and 90W sector) it shows "Connected at no charge" and it's there. Power Manager indicates that the battery is in good conditon, always 0 cycles. First used 7-11 - Manufacturered 12/10.

Last issue being the lock, I guess do it several times now, it's super hard to remove the battery, it seems as if I'm doing it wrong, but the first time when I arrived to the farm, I did to remove the DVDRW in it easily, there even 1 fingers. Now, it's like I'm breaking my fingers to get it open. The first switch, is more difficult to move too so the time switch is crazy hard to slide!

So, anyone got any ideas? I have 3 years warranty so I can send it, but it is my only system so I'm going to be naked for awhile until she coming back to me (no guarantee on the spot on this system, I "improved" to a T410 which was spot on.).

Thank you

PS - Sorry for the long post, I just wanted to give some details

FYI - apparently it was all the way down to the motherboard that needs to be replaced. Had to send in twice but the 2nd time that the Board of Directors has been replaced and now fresh stuff as it should. It also allows the hot plug and the switch is also easily removable.

Didn't want to be one of 'those' posts where the questions are asked but no solution posted later or "NVM - it is fixed.

Tags: ThinkPad Notebooks

Similar Questions

  • iPhone battery 6 draining on the home screen and locking

    I've read other posts on the drain of the battery on the iphone but that you did not find an answer that reflects my situation.

    Relates to the iphone 6, ios 9.3.1 64 GB,.

    I took my phone this morning and pressed the home button to check the remaining capacity before getting ready for the day.  It is 79%.

    I ask without opening any application or even unlock.  As usual, the screen goes black after a few seconds.  I go back an hour and a half later, and now it's 23%.  So I check the battery use it it shows as home and lock screen used 97% of the power of the battery since my last load.

    Why the drain?  It doesn't drain as quickly when I watch a video and it was just the home button to check the remaining power.

    The percentage shown is not since the last charge. It's usage in the last 24 hours. It could have been 5 counts at the moment.

  • How to stop iPhone 6 home and lock screen to drain the battery after that ios updated to 9.3.1 update.

    My iPhone 6 updated ios 9.3.1.  Never a problem before, it now shows that the home screen and lock use 78% of my battery.  How can I fix? Please help me.  Thank you.

    Your battery drains faster than before?
    If not then 78% is a comparative number - this means that your phone is turned off or to the screen for long periods of time - perhaps more than you use other applications

  • Satellite C660D - 10 d will not start unless I have remove the battery and reinsert

    Present a strange problem that I can't solve.

    Brand new, open all laptop worked perfectly.

    Turned off normally and left it overnight with the power supply connected.

    Next day morning pushed the button market / stop the portable green power on but light did not start.

    Press and hold the button for 10 seconds does nothing.

    I remove the battery for 10 seconds and put again and then you press the power button and you get a full boot up normally.

    Everything on it works perfectly, you can restart the laptop without problem, you can even turn off then turn on half an hour later with no problems.

    This problem occurs only when it is off and that the power is plugged in for several hours.

    Back to toshiba warranty, I've attached a note explaining the problem and even returned what he locked up so he wouldn't turn until they removed the battery.

    10 days later they returned it saying that the intensively checked the laptop and found no abnormalities.

    I plugged the battery and pressed the power button / stop and the same question once again outside of this period, that the fan runs for 2 seconds then turns off, I removed and re inserted the battery about 15 times before it started normally.

    Last night went out as normal and this morning the question of the standard of don't turn is not on at all.

    Just to clarify him when the power supply is left connected overnight or for several hours so that the system is power off the laptop does not start, the Green led lights, no fans spin, no sign of life. One way to start is to remove the battery for 10 seconds.

    I've been on toshiba again and said that if I return it a second time and they can't find a fault that I would have to pay £80 for it returned. I recorded the fault to prove that they is a fault but they seem not interested in that.

    Up to now, the bios has been updated, reinstalled windows, I can't replace drive HARD or RAM that the warranty will be voided. However issue and im 90% that this is a motherboard.

    All the ideas that I'm completely stuck on this one!

    Sorry to hear you I have a problem with your laptop.
    Problem you have is certainly hardware related issue and it should be solved by Toshiba.
    In my opinion you should not spend money for new parts, trying to solve this problem.

    Laptop warranty valid and should be set the laptop for free.

  • The T440p is compatible with the Ultrabay Battery?

    The title issue. I want to know if the T440p is compatible with the ultrabay battery. I don't have any use for the optical drive, and I know that the HARD ultrabay drive caddy is terrible, so I figure that I can use as well make this extra space.

    If this isn't the case, well fine, it's a shame, kind of pointless to have such a notebook thick with such a small battery.

    There is no Bay ultrabay for ThinkPad T440p battery.

  • I need to replace the battery and AC adapter of the Satellite Pro U400-160

    I have a Satellite Pro U400-160.

    I need to replace the battery and the charger of my Toshiba, but I am wary about compatibility issues.

    Any battery for Satellite Pro U400 is suitable for mine?
    As I can't find which batteries are specifically suitable for my computer.

    (For example: is this a: http://www.amazon.es/Bater%C3%ADa-Toshiba-Satellite-U400-11V-7800mAh/dp/B0051A9Y88/ref=sr_1_cc_2?s=aps&ie=UTF8&qid=1366885340&sr=1-2-catcorr&keywords=satellite+pro+u400?)

    Is there a quick way to check if a battery / charger are compatible?

    Each battery and adapter you get from Toshiba has specific part number. All you have to do is use this same part number and order. You should be able to find on the internet.
    You can also get compatible parts you are ordering by the Toshiba authorized service provider in your country.

    By the way: all U400 models have the same construction and the similar specifications then all the batteries specified for U400 can be used on your U400-160.

  • Question about the laptop battery and satellite L510

    I have a Toshiba Satellite L510 and find the battery moves a bit - like 2mm so be it.
    It is on the edge of the laptop, I suppose, but I was wondering if there should be no movement at all?

    Hello

    On my two laptops from Toshiba battery cannot be moved, but the battery is locked and cannot be moved or deleted.
    Your laptop satellite battery is too locked?

    By the way: when you use the notebook on the desk, this movement is irrelevant and cannot have a negative influence on the power supply for computer laptop battery s.

  • Satellite A200 - battery and a fan failure

    My Satellite A200 is a little more than a year and has not stopped the charge battery.

    While watching over portable saw fan does not no more, although no effect on performance when it is connected to the House.

    Two probs are fan cannot be hardware failure?

    And is it connected to the failure of batt?

    For me, it is not easy to say that the two issues are related somehow. You can check the functionality of fan if the laptop works on AC power only. Remove the battery and check it out.

    Also try changing the profile of power and method to see if it has any influence on the cooling fan feature.
    What about the battery? If the battery has stopped loading it may be due to the battery itself or perhaps electronic power supply on the motherboard, but if you want to have an exact answer to this the laptop must be controlled by authorized service provider?

    The warranty is still valid?

  • T420s UltraBay battery 57Y4536 (old) vs A 0, 36310 (new)

    I want to buy UltraBay battery for mine t420s and these 2 options:

    57Y4536 (old) Euro-105

    http://www.Verkkokauppa.com/Fi/product/53279/crsbf

    36310 A 0 (New) - 150 euros

    http://www.Verkkokauppa.com/Fi/product/12878/dhfrs

    The problem with the first battery cheaper on the referenced site above t420s is not listed as a laptop taken in charge. But when I check these:

    http://shop.Lenovo.com/ISS_Static/WW/EMEA/merchandising/PDF/en/T420s_DS_EN.PDF

    http://shop.Lenovo.com/us/sitelets/batteries

    http://www.nbwn.com/products/20937/Notebook-Accessories/battery-power-supply/battery-Lenovo-IBM/Leno...

    The first battery is clearly indicated for t420s.

    I would be grateful if you help me to answer following questions:

    1. is it more age compatible with t420s 57Y4536 ?

    2 are there advantages of the new model on the old model? Is - this block?

    I have defenetelly feel uncomfortable to pay 150 euros for the new model, if the old 105 Euro model works very well.

    Both batteries are basically the same, the 57... We're older, without the authentication chip (does not work in T430s), the 0 a... one is more recent, with authentication chip (also works under T430s).

    I use T420s with the 57Y4536. It's a Li - Pol battery. I bet that the new is also Li - Pol because Li - Pol is the only technology bringing cubic, not cylindrical, which is necessary for this battery.

  • y510p/y500 Ultrabay Battery?

    Is there a Ultrabay Battery for laptop y500/y510p? I would like to be able to add a bit more battery life.

    Thank you.

    Hi reconrey

    Thanks for posting!

    In my view, is not possible since the Ultrabay has a Sata interface that communicates through the Commission. So, it can interpret only devices Sata as ODD, GPU or turn on a fan.

    My suggestion is to install a battery as DC Batterymon.

    with it, you will see 'real time', your speed, then you can uninstall or disable some background apps and services at startup.

    The discharge rate can give you more autonomy.

    Hope this helps,

    See you soon!

  • Aspire V3 keyboard and wireless issues

    Hello

    I have an Aspire V3 - 771 G-9809, that is a little more than two years.

    Some keys on the keyboard at the top left do not work, such as the A, Q, 1 and Esc.  I called Aspire support before the expiry of the period for free help and they gave instructions to resolve this problem, something to do with the accumulation of static electricity upward, the included patch remove the battery and enter the BIOS to boot, but I do not now remember what the steps were.  Does anyone else have this same issue or know the steps to fix?

    In addition, for a while now the wireless is not connected and is low and slow when connected.  I don't think that the problem is with my router or my network as all other computers and devices in the end work from home.  I have to constantly disconnect, then reconnect the network connection to get the internet to work.  For any help or suggestion would be greatly appreciated.

    Thank you.

    The solution for static buildup is to remove the battery and cord power, press and hold power for 30 seconds, plug the power cord and start. There is nothing in the Bios that will fix the keyboard. Your keyboard could be dirt in these keys or it becomes defective and must be replaced.

    On the wireless, if you have the Atheros AR5BWB222, many laptops have problems with this card. You can try to reinstall the latest version of the driver for it, but you must uninstall all older drivers.

    As much as it's been around for two years, is it possible, he got hit pretty hard one of the antennas is out.

    If yours has a t shaped door on the bottom, you can remove it to get to the Wifi card.

    Many people are replacing the card.

  • After I downloaded beta Security Essentials, my computer say suddenly that he was not a genuine copy of Windows running and locked up.

    original title: the customer service is horrible

    After I downloaded beta Security Essentials, my computer say suddenly that he was not a genuine copy of Windows running and locked up.

    I called last night and got a foreign person has attempted to resolve the issues and could not, so he told me that I had to call back after 06:00 to speak to someone in the United States.
    So I called back today at 06:00 and got one of those who are running around things voice control that didn't fix my problem at all. After much effort, I got a live person. Again, it was a foreign person (why make me wait all night and get up early to call?!?!)
    This woman told me to restart. I told her that I had rebooted about 10 times since the day before and each time he took forever to load back up the box that tells me that I need to activate windows. She has reiterated, "I ask you to restart." I knew he wouldn't do ANYTHING, but I did and after the session it forever (as I told him it would be) she told me that I had to remind once I got up the box again. I called after that I got the box AND HAD TO START OVER again ONCE with someone new. Of course, she was trying to pass me to someone else.
    Of course, after all this trouble, no MS sells a product key for Vista, it is abandoned. So I need to go buy Windows 7 and she told me that I'll LOSE EVERYTHING when I install it - all my documents and family photos are gone forever. Why not take my money and sell me a product key instead of let me in trouble?
    The worst ever undertaken. Of course, MS doesn't care because they have a monopoly.

    You should not need to buy anything except the recovery disc for your machine (if the built-in recovery partition does not work), unless you really need Win 7 for some reason any.

    That being said - the COA sticker on your machine is readable? If Yes, then you should have no problem with a Windows 7 upgrade version - but you will need to either use activation by phone, or installation methods described here...

    http://www.winsupersite.com/article/Windows-7/clean-install-Windows-7-with-upgrade-media

  • Empty the Pavilion dv4 screen. CAP and lock number will Flash 3 times

    I have a pavilion with a white screen dv4.  The cap and number lock led's will blink 3 times.   I tried to remove the memory and restart with a single in a slot, then in another location, and then Exchange and repeating.  Still no change.   I removed the battery and power supply and power button that stood for a minute, and then tried to restart and still no change.  Any other ideas?   Or is she dead?

    with these symptoms, I guess it's a problem more serious. For troubleshooting, please contact any nearest repair center.

  • Bought a new dell battery and still my laptop battery does not charge.

    Hello.

    I am using a Dell inspiron 1545 for about 3 years now and exactly after 2 years of my purchase, the battery has failed and it began to show me to replace the battery and always informed to contact me dell for a new battery.

    I took this to a lot of trouble, so I simply ignored the message and kept using my battery with my wired adapter. After 4-5 months of such uses, my battery has completely failed and does not give me even even a minute of backup, when I remove the power outlet. Then I realized the importance of a new battery and then bought a new battery from Dell.

    Its the same battery with the same features and also the same type family. After that I removed my faulty battery, I replaced my purchased new Dell battery and realized that my battery works fine. his load well, but at one point, it says "plugged in, but do not load" which is rare for a new battery, that is purchased new.

    This is what it looks like now once I removed the plug adapter and when I depend on the backup battery. It provides a backup, but I see a Mark exclamatory yellow next to her. Which I think should not be present. He also says "Low battery" when there are already some 99% battery left!

    I also followed a few steps online

    (1) update the BIOS for the last 2) followed by a few other steps such as uninstall the ACI battery in Device Manager and etc...

    I'd like to get this problem is solved. I use an adapter family PA-12, which is also replaced. So any help on resolving the issue would be appreciated.

    Thank you!

    Hey maxim. I have actually FIXED this month back, problem. and I want exactly help on it so that you can fix it yourself too...

    the problem that is the creation of your battery to display an exclamatory mark is your power settings.

    then follow these steps to get rid of this sign and a battery to work perfectly.

    1) click the icon of your battery (left click), you should see an option called "Power Options more' at the bottom of the pop-up window.

    Click on 'more power Options.

    (2) now, you will be taken to your control panel where you can see all of your power plans and under each plan, you will see an option called "Change plan settings"

    3) click on "Change plan settings" for your active power plan. Now you will be redirected to another window of Control Panel, where you can see two types of power options to get adjusted. in other words, when you battery is connected and when your battery is disconnected.

    (4) do not touch these options, simply click on 'Change power avancΘs' at the bottom left of this window. THIS IS THE AREA WHERE WE HAVE TO FIX!

    (5) after that you click "Change advanced power settings", you will see a POWER options window, go down and then you can see what is called "Stack" with a sign to the left. until it clicks.

    (6) now, you just change the levels for the following values

    --> Critical battery level (you can change it to 10%)

    ---> Low battery (you can change it at 20%)

    Now once who did, YOU will BE No. LONGER SEE THE EXCLAMATIVE MARK on YOUR STACK!

    So I hope it works!

    Answer me when you've managed to fix.

  • BlackBerry smartphone how to restart the Blackberry Torch 9810 without remove the battery and reinsert again?

    Hello

    Can anyone help on this issue

    I want to restart the unit without removing the battery and reinsert again.

    Y at - it an option

    Yes.  It's easier with your blowtorch laid flat on a desk (etc.)

    On the QWERTY keyboard, press and hold ALT, and then press right SHIFT and DELETE keys at the same time. Until the red light appears, then release all keys.  This restarts your device and works on all devices with a standard QWERTY keyboard.  There are also applications 3rd party who will accomplish the same thing, but I think it works for me.  I hope this helps. ~ ecm

Maybe you are looking for