Expand a table online
Hello
Is it possible to extend a range of HP online? I use the image of HP of ESXi 5.1 U1.
Thank you.
I have not use it myself yet, but with the image of HP, you can check what is possible with hpacucli command-line utility. Please keep in mind however that some SmartArray controllers are still limited to the logical volumes ~ 2 TB.
André
Tags: VMware
Similar Questions
-
I need to use a table online that requires Firefox 3.6. How to do this?
I'm taking a course online through University of Boston. They provide a table online system called Vista. When I logged in to see if everything is compatible, they have a browser select feature that seeks to ensure that the different features are enabled or compatible. He pointed out that it does not recognize the version of Firefox that I use (9.0.1) and you can find their list of browsers supported by Firefox 3.6. How would I be able to get this version?
Upgrade to Firefox 3.6.25 (it is the only supported except last 9.0.x), download and run the installer from:
http://www.Mozilla.org/en-us/Firefox/all-older.html
Thank you
-
SQL type unrecognized: 'unsigned int' when I expand a table in Dreamweaver
Dreamweaver warning message - "unrecognized sql type: 'int unsigned.
This was happening in Dreamweaver MX and now in CS3. Pages using these tables are not to throw errors when I test them, but whenever I have to expand a table in Dreamweaver, I get these warning messages. Often, I get the same message several times and have to click OK every time before I can move forward. I had earlier OK the warning three times for a table that has a field of type integer and the two fields in total.
Any help would be greatly appreciated.
Thank youYes, it's a bug.
http://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform
I can't speak for everyone, but I have looked into the using integers as primary keys DW start hiccupping on them.
--
Ken Ford
Adobe Community Expert
Fordwebs, LLC
http://www.fordwebs.com'Bagger Vance'
wrote in message news:[email protected]...
> I prefer these integers be unsigned - is a bug in Dreamweaver? I do not have
> much expertise in MySQL, so do you know if it is unusual to use a
> unsigned integer with auto-increment for a primary key? I am baffled that I seem
> one of the few with this problem.
>
> Thank you
> -
1.5.4 - slow to expand the tables for oracle 9 connection
Hello
I have tried version 1.5.4 and have found that in developing the node tables in the Connections tab is extremely slow (about 3 min) for my oracle 9.2.0.6 connections.
As with this [this bug: http://forums.oracle.com/forums/thread.jspa?threadID=867600 & tstart = 0] it's ok on a 10.2.0.3 connection.
Expand the tables for the same connection in 1.5.3 is good too. I'm concerned that this latest version of the sql dev was not particularly well tested with oracle 9 abit.
Oracle 9 is still a supported with sql developer version?
Thank you
PaulThis issue is dealt with the last patch, ' check for update ' should take care of everything.
-
By default, all nodes expanded in table tree jsff page in adf
Hi all
I have a jsff page there is a table on this subject tree. I can't be expanded in charge (or to the default behavior).
How I reach.
It is worth noting that this jsff page so I can't use before or after the phase.
There is a property in the array of tree which is expandAllEnabled he developed tree nodes.
There is a property more tree table which is first expanded it shows only the first table developed tree node.
Thank you and best regards,
Vikas
Published by: vikasadf on May 16, 2013 08:02Hi Timo,
Thanks for your quick response.
I can't use listeners phase because I use jsff jspx.
in any case, I found the solution by using the approach below
creating a default method on the flow of task 1) and storage and by setting this method as the default activity in the workflow
class Test
{
private RowKeySetImpl ps;public void initTreeTableNode() / * this method is used to develop all of the tree nodel.
{
if(PS==null)
PS = new RowKeySetImpl (true);
PS = new RowKeySetImpl (true);
}
}and store a page flow scope and usage disclosedRowKeys = "#{pageFlowScope.expanedAllNodes}" in treetable jsff on page "
Thank you best regards &,.
Vikas -
expand the table "static" or line
I have a form in a format "table" with columns in subforms. One of the columns contains text fields that are set to develop to adapt because they are filled with text. Other subforms have simple text but with a color background. I want these to do, is extend according to the column of text expanding field, so the 'row' seems OK in all of the page. I also want the color backgrounds to expand.
Not sure if this is possible (or if I make sense). Thanks for any help.
Hello
If you use the Table object, each cell would expand to match the row height automatically.
If you are usign subforms, can you apply the color for filling of subform and not filling of individual objects?
Otherwise, you will need a script to the output of each field event, making the height of the other fields in the subform the same height as the largest field. I thought I had a script, but can't find it at the moment.
Niall
-
Partitioning of a huge table online
Hello world
I have a table of size approximately 700 GB (it has pictures in there, that's why) that is not partitioned (!)
I need to create partitions to do this for each year. It's about 15 partitions.
I read the instructions that apply to partitions (by creating a temporary partitioned table and transfer data to it using the dmbs_redefinition package).
My question is: can I save time if I make a redefinition using logic "a partition at a time" or do I have to apply the redefinition create all partitions at the same time?
It is 700 GB and I'm afraid it will take some time and do not want to risk big downtime (the table is updated frequently).
Thank you in advance.
To answer your question, dbms_redefinition will all the table and the LOB segment to the new silo structure. There is no interruption of service, set apart from the DDL locks that (with luck) your users will not notice. You can suspend the database for a few seconds to ensure that the DDL locks cross.
The question you didn't ask, is "why should I partition the table? Partitioning by date range can be vauable for purposes of maintenance, if use you only local indexes. It can also be useful for the partitioning of pruning, if you don't get a table. I don't think that either these reasons if it is valid for you: only 15 partitions won't be a lot of benefits to pruning, and if maintenance operations are only once a year, it will be not significant for that, either.
So why would you do that? The table size is not a reason. I found that if the partitioning is made without a strategy defined to meet a specific objective, the results can be disastrous.
--
John Watson
Oracle Certified Master s/n
-
conditional coloring the table online
Hello
I want to show some table cells highlighted with a different condition of colors.for. For example, if the status is active in green show otherwise show in red.
How can I achieve this?
see this
http://www.techartifact.com/blogs/2009/05/conditionally-colouring-of-row-cell-in-ADF.html
-
Remove the same instance of two separate tables online
Hi all
I have two tables that each repeatable lines. Both tables must display almost the same information in each case of the line (I managed to code to link the values in specific cases of the lines). However, I added a button in the repeatable row, which allows the user to remove from the current instance of the line, so will they look back and realize that they do not need a line, they can take directly from the table. However, I can't seem to get the deletion affects the same instance of row of the second table. Is it possible to do this? I'm not terribly familiar with the instance Manager.
Any help would be greatly appreciated. I just can't understand how to identify a specific instance of the repeatable row in table 2.
Hello
Removing instances in the event of an object that is inside the instance, you must ensure that you remove this particular instance at the end of the event.
For example:
If you delete the instance that the button is on the inside before finishing the entire event, the program will not recognize what event is to finish because you have removed it from the object that is triggered...
You try here at the end of the code that no longer exists...
I suggest that you still need to delete the instance (this) object at the end of any event to make sure to complete all your actions before deleting the object.
I hope this helps!
-
Expand the Table next to a static chart
I have a graph on the left I want to remain static and a repeating table next to him. I tried several methods to keep it in place, but if the table extends beyond a certain point it drage graphics with it. Is it possible to lock this graph aside in place?
Think I solved the problem. Re-slices it to stay locked in place. He lined up at the top. Additional table and it remained... appreciate the help.
-
cloumn on the emp table online
Hello world
I want to do EMP table in columns by departments
under the name of employees of each Department
for example,.
10. 20
CLARK | SMITH
KING | FORD
MILLER | ADAMS
Thank youYou mean like this?
SQL> select * from emp; EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO ---------- ---------- --------- ---------- -------------------- ---------- ---------- ---------- 7369 SMITH CLERK 7902 17-DEC-1980 00:00:00 800 20 7499 ALLEN SALESMAN 7698 20-FEB-1981 00:00:00 1600 300 30 7521 WARD SALESMAN 7698 22-FEB-1981 00:00:00 1250 500 30 7566 JONES MANAGER 7839 02-APR-1981 00:00:00 2975 20 7654 MARTIN SALESMAN 7698 28-SEP-1981 00:00:00 1250 1400 30 7698 BLAKE MANAGER 7839 01-MAY-1981 00:00:00 2850 30 7782 CLARK MANAGER 7839 09-JUN-1981 00:00:00 2450 10 7788 SCOTT ANALYST 7566 19-APR-1987 00:00:00 3000 20 7839 KING PRESIDENT 17-NOV-1981 00:00:00 5000 10 7844 TURNER SALESMAN 7698 08-SEP-1981 00:00:00 1500 0 30 7876 ADAMS CLERK 7788 23-MAY-1987 00:00:00 1100 20 7900 JAMES CLERK 7698 03-DEC-1981 00:00:00 950 30 7902 FORD ANALYST 7566 03-DEC-1981 00:00:00 3000 20 7934 MILLER CLERK 7782 23-JAN-1982 00:00:00 1300 10 14 rows selected. SQL> ed Wrote file afiedt.buf 1 with d1 as (select ename, row_number() over (order by empno) as rn from emp where deptno = 10) 2 ,d2 as (select ename, row_number() over (order by empno) as rn from emp where deptno = 20) 3 ,d3 as (select ename, row_number() over (order by empno) as rn from emp where deptno = 30) 4 -- 5 select d1.ename as dept10, d2.ename as dept20, d3.ename as dept30 6 from d1 full outer join d2 on (d2.rn = d1.rn) 7* full outer join d3 on (d3.rn = nvl(d2.rn,d1.rn)) SQL> / DEPT10 DEPT20 DEPT30 ---------- ---------- ---------- CLARK SMITH ALLEN KING JONES WARD MILLER SCOTT MARTIN ADAMS BLAKE FORD TURNER JAMES 6 rows selected.
As already mentioned, in a reporting tool is much better.
-
Expand the table, the rows and columns
I can make my table grow in rows or in columns, but not both, when I add a line, it will not add the column that I just added and the colum will not include the line that I just added.
We know what script I need for the addInstance know whan I added a new row or column.
Thank you.
I had a look, and here's what I came with. Whenever you add a row or column, you are chnaging the expression of som that allows to add the next row or column. I added a loop around each call to add the columns/rows as needed.
Is that what you're looking for? See the attached file
Paul
-
Expand 32 table of entry to 1024 by interpolation
I agree with RavensFan.
If you want to do a brute force method, consider using the Pattern.vi ramp inside a loop.
Lynn
-
My ESX 4.1 server has run out of disk space.
Its a R610 from Dell with a matrix RAID 5.
I thought adding another 2 drives and expand the table. Is it possible to do this without losing all the data on the disk? or you can expand the table in Dell management and ESX recognize the size increase?
Thanks in advance,
Huw
I am sure that it will work with the H700, but please check.
For documentation see Dell PowerEdge RAID Controller (PERC)
André
-
Drag the cells numbered to increase automatically multi-page tables
This is my problem: I have a table in Pages 5.6.1. that spans multiple pages. If I numbering in the first column, I want to have it extend over the entire table in ascending order. I can do this by selecting the first 2 numbered cells and dragging that little yellow ball at the bottom of the second cell to the bottom. However, it does not cover several pages. Why and how can I solve this?
I can't get pages 5.6.1 right now so I guess it's just another (too) bug or failures of the user interface.
Just work your way around him in one of the many ways.
Temporarily, expand the table across the page, so some of your pop series on the next page and then grab two cells and drag them.
or a pair and paste them.
or reduce the table, and then expand it again.
I'm sure you can perhaps think a little more.
Peter
Maybe you are looking for
-
Passwords are saved even if I signed out of sync.
Is it not logical to Firefox to remove all my private staff, as the passwords for example, if I register on Firefox Sync?Or am I wrong? Thank you.
-
number constantly engaged online
My online number is constantly engaged, he was to live for 12 hours now... do I want a refund... Any ideas what's happening?
-
Map chart AMD 14 ZBook and docking station
I have problems with a ZBook (AMD grahics version) 14 and an ultraslim docking station. HP two monitors are connected to the docking station with display ports. I can say that I have the latest BIOS, drivers and firmwares installed. I am running wind
-
I have connected my laptop to my TV with an HDMI cable and the audio only I can get it out is via windows media player... How to operate on the internet and other applications?
-
Can't seem to load and listen to music at the same time
So I got my Droid X for a week now. A great phone. But I'm having a problem. Basically, I want to listen to music while it is connected to a computer via a USB cable to charge. "' Charge mode I guess put the phone in" only "would set the phone to use