Expand the C partition in Windows Server (not not using diskpart)

Similar Questions

• How to extend the system partition of Windows server 2008 for free?

  my windows server 2008 r2 system works really slow, I'm extending the system partition. I tried windows built-in disk management, but after releasing the free space disk d: I cant just add for the c: drive, I can not move its position. It's disgusting! then I found a few 3rd party software, but none of them are free, they are more expensive I can afford is there some advice to help me to ~ ~ thank you very much!

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb310558.aspx

  Hope this information is useful.

• Expand the C drive in Windows 2003 Sp2

  Hello

  I need to expand a VM windows Server 2003 R2 C: drive using VMware vcenter convertor, fight, it doesn't did me not the possibility of increasing the C: drive. What is the alternative? or I've missed using the V2V? Thank you.

  kamran7446 wrote:

  Thanks for your reply. Yes, it's showing as unallocated, but because it's a system (C:\) drive I can't extend it by using Diskpart utility I can do for other readers.

  There are different ways to do this for Win 2003 (easy in 2008, has expanded in the GUI). For Windows 2003 you could close the virtual machine, get the VMDK on another Windows Server, use Diskpart or another tool to extend partition here - since it is not the system partition / boot. Then mount it in the original virtual machine.

  Official VMware training, they recommend a free tool from Dell, called extpart.exe. Simple tool command-line which allows to extend the system partition / boot when the virtual machine is running. Check it out and try if you wish.

  It is on the FTP of Dells site at ftp.dell.com/app, any logon not required.

  Tool: http://ftp.dell.com/app/ExtPart.exe

• cannot expand the c partition in unallocated space

  I have a HP Pavilion dv5224nr laptop running Windows XP.  I've been low on disk space, so I came on this forum to find out how to remove the recovery partition, since I have the recovery CD from HP.  Now that I deleted the partition through disk management, it only allows me to expand the C partition in unallocated space left by removing the partition D.  "Extend partition" is not an option in the menu when I right click.  I also tried going through the "diskpart" command prompt, select the volume and him asking to "extend".  I received a message that it was unable to extend the volume.  How can I recover the 12 GB of space on my C drive?  Thank you.

  I downloaded a free utility called Easeus Partition Master and it worked very well for resizing my partition C.  I also used explores the function to watch the 1 gig unknown partition and it wasn't empty, so I left it alone.  Thanks for your help!

• Hard drive to expand the C partition

  Hello

  How to expand the C partition on the hard drive. For the C partition option is grayed out in Disk Management extend it.

  Dell Inspiron 1564, Windows 7.

  Photo of attached disk management.

  For some reason I didn't your answers on your other thread.

  You can only expand in the unpartitioned space on the right of the partition that you extend. You deleted the D: drive, but the space is not the unpartitioned space. Because you can have a maximum of 4 partitions on an MBR disk, the last of them is typically created as an extended Partition, that allows you to create additional logical drives inside. It is a goofy configuration if this is how he got from Dell. You must also delete F:, then delete the Extended Partition. Then you can extend C: you have unpartitioned space where was the Extended Partition.

• Impossible to expand the C partition after the reduction of the DATA Partition

  I dropped my DATA partition to increase the size of my partition Vista (c), but I can't extend C: (as far I understand it) because it is more than a single partition to the right.

  I can reformat the free space and I have another partition, but I would rather extend C:
  Is there a way to do this?

  Also, I wrote my recovery disks, but the DATA partition again should he be there? Also if you do not delete the DATA partition and that do it again you?

  Thanks in advance.

  Hello

  The problem is that your data partition was created after the C partition.

  If you reduce a partition, the free space appears after the shrivelled partition and so you can not add this free space to the other partition of C that is placed behind the partition Data (D).

  The only way to expand the C partition is to delete the partition D and then to add this free space to the C partition, but I wouldn't delete the DATA partition because it has a record of recovery that is necessary to create the Toshiba Recovery DVD

  But if you have already created a Toshiba Recovery DVD then the deletion of the DATA partition is not a serious problem because the Toshiba Recovery disk would format the whole HARD drive and would create 3 new partitions (hidden WinRE partition, partition C system, DATA partition).

• the installation program could not use the existing partition because it does not contain the required free space

  before I have install android 5.0 lollipop on mylaptop but I can't use wifi to connect then I use return windows 8.1 and I decided to install windows 8 because I have experience an error I couldn't manage on windows 8.1 .when I try to install windows 8 it shows me this error Setup could not use the existing partition because it does not contain the required free space... I google search for the solution but could not find so I install the windows partition 8 on my system reserved.

  Hi Lawren,

  Thank you for your update on the issue.

  In this case, you may need to format the entire disk, clean the partitions and reinstall new windows as suggested before. However, I suggest you to contact local support for the backup of your data from hard disk partitions.

  Please post back your results for assistance.

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• I lost the installation media for windows server 2012 std

  I lost the installation media for windows server std 2012, but I have the key. where I can download the media.

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• When I try to connect to the net on my laptop LG I often get the message saying that windows could not connect.

  Windows does not remember the setting.

  When I try to connect to the net on my laptop LG I often get the message saying that windows could not connect and I have to go into the advanced settings and check the box that says allow windows to configure the network. My problem is that windows doesn't remember this setting and that I need to check the box almost everytime I try to connect. He made it with my desktop so I was wondering if anyone has a solution for this.

  Using a wireless router? What is the brand and model of your router? I don't think it's a matter of windows.

  Troubleshooting in windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Hope this helpful. Post back if your problem is not resolved in the link above.

• Defragment the exFAT partitions in Windows 7 Ultimate x 64

  Hello

  Is it possible to defragment the exFAT partitions in Windows 7?

  I have a 1 TB hard drive, acting as a storage/backup drive.

  (average file size is greater than 2 GB)

  It is formatted as a single partition. And formatted exFAT file system.

  But after filling the disk with data, moving, deleting files, performance declined, which is normal and would require a simple defragmentation.

  The problem is simple - how defragment my partition exFAT?

  Hello

  Unfortunately, you won't be able to defragment a disk with a partition exFAT.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firewall Windows does not use recommended settings

  Firewall service Windows is not running: does not use recommended settings

  Firewall service Windows is not running: does not use recommended settings

  Please specify:
  > windows firewall service is not running
  > does not use recommended settings

  If it running or NOT?
  Which of the above is the problem?

  RE: windows firewall service does not

  Start button > in the search box, type services > press the Enter key > scroll down to Windows Firewall and click on it...
  under the State column, it must be said... started
  under the Startup Type column, I must say... Automatic

  If it does not say that, right click on Windows Firewall > click Properties > make the changes.

  RE: does not use recommended settings
  
  Start button > in the search box, type windows firewall > looks upward at the top on the left, click on Windows Firewall > click on change settings > put on a blue radio point (recommended) level > OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Hello. I bought Lightroom, paid license 1 year view, did not have serial. E number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?

  Hello. I bought Lightroom, paid license 1 year view, did not have serial. And number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?

  Hi Sergior96769872,

  I saw your Adobe ID (email address), you used to post on the forums, and I see an active subscription on it.

  Please see Help below links: { make sure you use the same Adobe ID (email address) that you used to purchase the subscription }

  Connect and disconnect activate Cloud Creative applications

  Adobe Creative Cloud apps back in test mode after 2015 set CC to update

  * NOTE: Make sure that your firewall of your computer or security software firewall does not block Adobe, if you are not sure of it can just disable the firewall for a while and then log off and log on creative application of cloud and check.

  If it still gives you an error of the trial, then please refer to the troubleshooting listed below:

  If you are using MAC:

  1-force Quit the sub process in the same sequence as shown below from Activity Monitor: see, use the monitor activity on your Mac - Apple Support

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (it will open the folder of the user's library.)

  3. browse to the Application Support > Adobe > trash OOBE folder and folder AAM Updater

  4 - CUT any installed security software with firewall system.

  5 - go to: Apple icon > system preferences > Security & Privacy > General > "allow applications downloaded on" change this anywhere (to make these changes click the padlock in the corner at the bottom left of this window and enter your computer password)

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  6 - restart the cloud creative app and connect

  
  

  If you use the WINDOW:

  1 complete the process / Task Manager tasks in the same order, as mentioned below the Manager tasks. See, Open the Task Manager

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  3 - CUT any security software installed with firewall system, also if your having any browser Add On installed for blocking advertising that turn off too.

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  4 - raise the cloud creative app and connect

  Let us know if that helps.

• Windows 2000 update stops at "checking if your computer has the latest version of Windows Update software for use with the site... »

  When I try to update Windows 2000 by using Windows Update, web site crashes the message

  'Check if your computer has the latest version of Windows Update software for use with this web site... The Web site uses ActiveX controls to determine which version of the software your computer is running. "If you see an ActiveX warning, make sure that the control is digitally signed by Microsoft before installing it or allowing him to run.

  Y at - it a fix for this problem?

  This problem may occur in Windows 2000, Windows 2000 SP1 and Windows 2000 SP2 on computers. These versions are no longer compatible with the Windows Update Web site. To resolve this problem, you need to install the latest Service Pack for Windows 2000 computers. Follow the link below to access the article and get with the latest Service Pack.

  http://support.Microsoft.com/kb/260910

  Bobby