Expiration of the user account > need to OPEN

Similar Questions

• User accounts - need to open a user account so that others can use my office

  I have Vista Home premium running and need to open a user account, while others can use my counter top... Will be some let me know how to do this?

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-the-guest-account-on-or-off Rob ^ _ ^.

• Need to change the name of the administrator under the folder of the user account

  I just got a new HP laptop with Windows Vista 64 SP1. My friend who got the laptop I use a nickname that I hate it when he set up the computer for which it was not supposed to do in the first place. I went to the section control panel user accounts control and changed the name of the administrator account. I have only the administrator account on my computer with the guest account. That part worked.

  My problem is that, under C:/Users / (username), it still shows that hated nickname. I want to change the name of this folder, but cannot understand how or if it's possible. Can anyone help? Thanks in advance

  As you have discovered, you cannot change a user account by simply changing the name. That will be a change cosmetic only and none of the files/folders real profile will be changed. Follow the instructions below to fix things to your liking and to implement correctly under Vista user accounts.

  1. create the new user account (named as desired) as a * standard * (not administrator) account and at least one additional account with administrative privileges. Call the extra account 'CompAdmin', 'Tech' or similar.

  2. Enter the new user account once if the profile files are created, and then disconnect and then connect to CompAdmin.

  3. go in Control Panel > system > advanced > user profile > settings

  4. you will see where you can copy user accounts. Copy the misnamed old account to the new name correctly there. Use her browse to select your new account (C:\Users\newaccount). If you don't want to copy all the settings, and then instead simply navigate using the old user, music Explorer Windows Documents, etc. and copy the data to the new user folders.

  5. connect to your new correctly named user account. When you are sure to have what you need, you can delete the misnamed control panel user account > accounts to users if you wish.

  General information about configuring users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. If your normal user account is an administrator, having created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• How can I disable the popup control in the user account that appears on my desktop to allow or reject the changes when I open a program without changing my user account settings.

  Original title: uac

  How can I disable the popup control in the user account that appears on my desktop to allow or reject the changes when I open a program without changing my user account settings.

  You want should not do that. These pop-up UAC is there to ensure the interaction of the user before executing a command or program. Disabling, allows even unwanted programs (= malware, viruses, Trojans) go ahead and implement themselves on your system without being noticed.

• Need to access the user accounts from previous installations

  I am running Windows XP Pro, and I have installed new software.

  When I have it ran for the first time my PC crashed. Now, whenever I try to load it up it just keeps restarting before you get to the login screen. Safe mode does not help you, or doesn't last known good configuration. There is no recovery point recorded.

  I searched online for help and tried to repair the Windows version by inserting the CD and choose 'Repair', but there is no repair option. He wants me to install a new version of Windows on the partition, which, from what I understand, going to wipe my user accounts. It would be a big problem, as I have a lot of data out there that is very important for me who is not saved. My fault, still backward, etc. No not after the sympathy, just stating the facts!

  I also have Windows XP 64 is installed on a separate partition, and I loaded this up to see if I can see the user account I want to access. I can. But I can't access it because it is password protected, and it just comes up saying 'access denied '.

  So, how do I gain access to this user account? Doing anything to the working version of XP64, either by repairing the other partition inactive?

  All welcome, no matter how much of a long shot it is advice. I'm getting desperate!

  Thanks in advance.

  Hi Malkeleah,

  I had real problems trying to get Knoppix to work. I downloaded on my laptop, then had to put on a USB key to burn on the PC with Win 64 on (portable DVD player is read-only), but I couldn't do burn. I kept of burning errors using the built-in burner after first unpacking the ISO on the laptop (no support ISO native in Windows XP), or when I tried to install on win 64 the system burning software I got error messages saying: the software wouldn't run as soon as I clicked to install it. And Yes, I checked that I was using the software compatible 64-bit! No idea what it was, the 64-bit version has never really been used, not even well why it is installed.

  In any case, after that much hitting my head on the office followed a couple of pints in pubs, I managed to find another way around this problem, which was to take ownership of the files according to the instructions on the Microsoft Web site:

  http://support.Microsoft.com/default.aspx/KB/308421

  It worked wonderfully for me, and I have been able to support Windows 64-bit, re - install XP 'normal' and then appropriated again under that. 2 files come with errors and would not sell the property, but they were not even remotely important if everything is good. I got literally thousands of other files that flies over without any problems.

  In any case, thank you for taking the time to help me, I'm sure that your method would have worked if I had been able to create a CD (I would have posted off the coast for one if everything else has failed because they will send one in the world for any $2 IIRC), but for someone else who did a search and found my ad the above that I mention is worth a go as an alternative method.

  And no, I didn't have the encrypted files. Just locked the account of some simple password protection.

  Thanks again,

  Chris.

• How to remove the user account from the connection Start Page (therefore restart goes directly to the desktop without the need for any clickthru)?

  On my Windows 7 Home Premium SP1 64-bit system, all I had to do was to remove all the accounts (other than 'administrator') in addition to my login information main user account and remove the password of the Admin account and I use a main user account, and then whenever I reboot, reboot goes all the way to the Windows desktop (i.e. through it does not stop with a cover page showing the user account).

  -It does not seem that this approach works for my Vista SP2 Business Edition 32 bit.  In fact - I get TWO accounts of user with the exact name even appear (my account "DougL12"), as well as the "Administrator" account  None of these accounts have passwords (I can just click on one of them, which brings up a screen to enter a password, then click again without entering any PW, and then I get thru on my desk).

  When I go to 'User accounts' control Panal and select 'Manage another account', windows displays a screen showing three accounts:

  (1) "Guest" (power off);

  (2) "DougL12" (hey I am running, whose B-T-W has privileges admin; also do not have a password); and

  (3) 'administrator' (which, if I choose only, is not an option 'disable', although it has not one)

  (password).

  NOTE: page does not display "" versions of the user account "DougL12", although the login screen that is telling.

  so:

  (1) what do I do to eliminate the appearance of user accounts / Login Screen (i.e., default to my main user

  Account, "DougL12" and should not click)?

  (2) any thoughts as to why the system could be displaying two Occurrences of the user account Login "DougL12" on the

  login screen?

  Hello
   
  I would like to suggst you follow link which can help you solve your problem below:
  Turn on automatic logon
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-on-automatic-logon
   

  See also:

  Enable and disable the built-in Administrator account
  http://TechNet.Microsoft.com/en-us/library/cc766343 (WS.10) .aspx

• Not able to connect to the user account, error: user profile Service has no logon

  I'm on a HP Pavilion dv7 with Windows 7.  I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon.  User profile cannot be loaded. »

  Where and how can I fix it?

  Thank you.

  Larry

  Original title: need help with setting up an account

  Hi Larry,
  Thanks for posting your query in Microsoft Community.

  From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon

  This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  To resolve the problem with the user account, you can follow these steps:
  Method 1:
  (a) click Start, type regedit in the start search box, and then press ENTER.
  (b) search for, and then expand the following registry subkey:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  (c) right click the SID that you want to remove, and then click on remove.
  (d) log on to the computer and create a new profile.
  You can also check this link:
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Method 2: Also, see the steps in the following Microsoft article:

  (a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  (b) how to back up and restore the registry in Windows
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  (c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• on windows 7 starter edition how can I open an admin account, I have a standart account and I couldn't open any software on computer please help me.even change user account cannot be opened.

  on windows 7 starter edition how can I open an admin account, I have a standart account and I couldn't open any software on computer please help me.even change user account cannot be opened.

  Hi kuentin,.

  Welcome to the Microsoft Answers site!

  (1) - what do you mean you have only 1 user account?

  When you set up Windows, you will need to create a user account. This account is an administrator account to allow you to set up your computer and install any programs that you want to use. And that's why the user account you are using is the administrator account.

  There is no way that you can create an administrator account, or by using a Standard account.

  (2) are you having issues during installation of the software or opening it?

  (3) what exactly happens when you try to open the software application?

  (4) should be codes error or error messages, if any?

  (5) what software are you trying to install or open?

  I suggest you go to the link below and read for more information on user accounts.

  http://Windows.Microsoft.com/en-us/Windows7/user-accounts-frequently-asked-questions

  Get back to us with more information and try out us and help you better with the same.

  Concerning
  Varun j: Microsoft Support
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Run as pop up appears for the user account to connect to the computer

  Original title: security

  "When I turn on my computer, a smaller screen appears on the display of windows 'Run as' breast and ask which user account you want to use to run this computer", it then lists current user with a number that is similar to mine as an administrator with a checkbox. "or below cela" the following user ' to add details. I'm afraid that someone is trying to take over my computer. I have run Norton anti virus. How to stop what appears and get rid of it. This is a major threat. Paul

  Hi Paul,

  1. what anti-virus software do you use?

  2 you use the password while logging on to the user account?

  I suggest you of change the logon window and the shutdown preferences in Windows XP to resolve the problem.

  Setup configures Windows XP to use the friendly welcome logon screen and close buttons, if your computer is installed as a computer (a computer where a network domain has not been specified).

  This article describes how you can enable the classic logon screen used by Windows XP Server that resembles the following example:

  Log on to Windows

  User name: _______
  Password: __________

  To temporarily use the classic logon screen, press Ctrl + Alt + Delete twice on the Welcome logon screen.

  To configure Windows XP to use the classic logon and shutdown for each logon screens, follow these steps:

  a. click Startand then click Control Panel.
  b. double-click user accounts.
  c. click on change the way users log on or off the power.
  d. Click to uncheck the use the Welcome screen check box.

  Note: If you disable the Welcome logon screen, you also disable the fast user switching option.

  If you want users to press CTRL + ALT + DEL before the classic logon appears like a Windows XP-based computer that is joined to a domain, follow these steps:

  a. click Start, click run, type regedit in the Open box and then click OK.
  b. click the Winlogon subkey at the following registry location:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
  c. click change, click newand then click DWORD value.
  d. to change the name of the value, type DisableCADand press ENTER.
  e. keep the data value set to 0. The set of data values appear as 0x00000000 (0).

  Warning: Ask users to press CTRL + ALT + DEL before the classic logon screen appears.

  If you don't want that, then come back in a classic.

  Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  For reference, click on the link below:

  http://www.Microsoft.com/security/PC-security/protect-PC.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• Unable to access the user account

  I have an old computer, but it is always useful.  On startup, I get this message:

  "Windows cannot load the locally stored profile.  Possible causes of this error include insufficient security rights or a damaged local profile.  If the problem persists, contact your network administrator.

  DETAILS - an operation i/o initiated by the registry failed irreparably.  The registry could not read, write or flush, one of the files that it contains the image of the registry system. »

  What can I do to access my account and My Documents with all my stuff in it?

  Thank you very much!

  Try to find that the problem with the user account is probably not worth the time it would take. Restart the computer in Safe Mode. When you are prompted, choose to log in to the administrator account. Go to control panel > user accounts. Create a new account here. Name anything at random for now. Now navigate to my computer > C drive open > Documents and Settings folder. Your old user account. Now locate all records containing your files. Copy and paste them in the folder appropriate for the new account. Now delete the old account.  You can now change the name of the new account name you had in the old account. It is probably the best way to fix it.

• 'Learning' help pages for the user account is empty

  Hello

  I am facing problem when I try to open the user account or types of user accounts or layout help user under 'Discover' page in the user account. White always open the page. I use Windows XP Embedded and got my picture made through Target designer. I had installed the 'Help Center' and Service component and "help and support" but still the problem persists. I can run helpctr.exe without any problem and more on the 'help and support' service is running normally. Future prospects for any solution on this.

  Nitin

  Hi nsrivast,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  This problem may occur if one or more of the Jscript registry key settings are incorrect. This problem can also occur if the Jscript.dll file is missing or damaged.

  (a) click Startand then click run.

  (b) in the Open box, type regsvr32 jscript.dll , and then click OK.

  (c) click OK

  Several dialog boxes are empty

  http://support.Microsoft.com/kb/831430

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot type the password in the user account control prompt after activation of the hidden admin account.

  Original title: where to type the password of the user account control?

  I have a problem of user account control is it said to type an administrator password, but there is nowhere to type in it. I can't access anything on my computer because there is a password. My computer does not have an administrator account and I can not activate the administrator hidden with UAC on because I can't type the password. Where to enter it?

  Hello

  System Restore can probably help.

  To restore the system from DVD

             

  a. start the computer from the Windows installation disc

  b. Windows will automatically run the disk is empty, and will load the files; This can take some time. The

  c. Windows Vista install will begin charging.

  d. now, select your installation language, time and currency Format, and keyboard type and then click "NEXT" to continue.

  e. in the next screen click 'Repair your computer' to continue. Windows will now search an Installations of Windows.

  f. on the next screen, select the operating system on which you want to do a repair. Select it, and then press 'NEXT' to continue

  g. you are now in the menu "Recovery Options.

  h. in the 'Recovery Options' menu select 'SYSTEM RESTORE'.

  i. the menu "Restore files and settings" is displayed, click 'NEXT' to continue. Now in a 'Restore Points' selection select one that you want to restore too. Then click "NEXT" to continue. You are now given an option to restore the other disks as well as the operating system drive. If you have no problem with them, then just restore the main drive.

  j. now, you will need to confirm the restore point. Click "FINISH" to continue or "BACK" to select another drive or restore point. You are now prompted one last time to confirm that you want to continue. Click 'YES' to continue or 'NO' to select a different drive or restore point.

  k. 'System Restore' will boot now.

  System Restore will now restore files, finalize the restoration.

  Once this done, tell whether she succeeded it, if so click "RESTART" to restart the computer, if it's not then try a different date.

  Once rebooted and you get on the desktop, you will receive a confirmation of the success of restorations. Click 'CLOSE' to continue.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Impossible to activate the user account control

  Original title: user account will not

  My user account control has been turned off.  Whenever I'm back on the computer needs to restart. However when it doesn't the user account is still once turned off.  Any help welcome

  My user account control has been turned off.  Whenever I'm back on the computer needs to restart. However when it doesn't the user account is still once turned off.  Any help welcome

  Please, don't say "user account" when you hear the user account control. They are 2 different things.
  Tell the UAC if you wish.

  Take a look at this tutorial

  http://www.Vistax64.com/tutorials/48893-user-account-control-UAC.html
  There are 3 ways to activate UAC in this tutorial.

  If still no help, please do a check of the file system. It will look for corrupted files and it will try to repair if it is found.

  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

• Logging on to the user account

  I tried to connect to my computer at home today however, he did not accept my password.  I don't have I changed password so I'm not sure why this problem occurred.  There is only one account on the computer, so I don't know how to log on to the computer at all.

  The error msg I get is the following:

  The user profile Service service has no logon.
  User profile cannot be loaded.

  This error can usually be fixed by following the steps below. All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  1 log on to a different user account with administrative privileges. If you neglected to make an account additional administrative steps 2-3. Otherwise, continue to step 4. See also General information on setting up user accounts in Vista at the end of this post.

  2 in Mode safe boot. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the menu on the right where you can use your arrow key to select Mode safe [Enter]. The built-in Administrator account is disabled by default in Vista. However, if no other administrative accounts exist on the system it can be activated. If this is the case, you will see an icon for the administrator on the homescreen mode without failure. Login to the administrator.

  3 If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled so you will need to work more.

  a. If you have a Vista DVD installation (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  If you do not have a Vista installation DVD, you can do a repair file Vista bootable DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD.

  Now remove the rescue CD/DVD, you have done, reboot Windows and log on to the built-in Administrator account, you enabled.

  4. try a system restore to when things worked. If you can log in to your user account, you are finished. Otherwise, continue to step 5.

  5. the critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run Regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  There is a line for each profile. If a profile is bad, check:

  (a) that the name of the key does not stop in ".bak" (remove .bak If it)
  (b) that the RefCount value is 0 (change it if it is different)
  (c) that the State value is 0 (change if different)

  Make the necessary changes, close Regedit and try to connect as this user.

  6. If that doesn't solve your profile, it is corrupt. At this point you can either make a new user account and copy your data on it or simply make a new user account and delete the old a corrupt. Do not delete the old account until you have recovered data you need! Post back if you need help by creating a new user account and copy of data to it.

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• How to fix the user accounts in windows 8

  How to correct the user account in windows 8 on new g7 2246nr, I put to your laptop using the Microsoft account then switched to a local account.  I found myself with i admin working the rest of my files are broken up between 3 other user accounts.  I spoke with Microsoft to try to consolidate the accounts and they used a command line in the command, but he has not done. I always work with the system, but it has problems. I reloaded the software so for 3 times. All know how to correct the problem without reload all the software again?  also, after configuring sharepoint in Office Pro Plus, he created another administrator account.  I do not think this would happen?

  Hi BJ2124,

  Although I regret the inconvenience that you had with your experience of Microsoft Windows 8, you can better receive the technical expertise you need by contacting Microsoft about the issue of multiple account creation.

  You can call Microsoft Customer Service at 1-800-642-7676
  Mon - Fri: 05:00 - 21:00; Sat - Sun: 06:00-15:00 (PST)

  As a reference, I included the link to the technical support of Microsoft Windows 8 page:

  http://support.Microsoft.com/contactus/?ws=support

  Also, here is a reference link to change logins to Microsoft for local accounts:

  Microsoft how to switch from one account to a Local account in Windows 8

  And finally, here is a quick reference to solve the problem that you encounter while using an account download troubleshooting tool from Microsoft:

  The problems of account Microsoft Windows 8 with convenience store "Microsoft accounts"

  In this forum support is available for support hardware/software HP. I will provide better supported with your hardware/software of HP. If you need help with a software which is another provider, so I can re - direct you to reference appropriate at this time.

  I hope that you can mark these messages as solved, so that you can inspire others to follow your example with success. You never know who you can inspire.

  -How can I give Kudos? | How to mark a post as solved? --------------------------------------------------------