Unable to access the user account

Similar Questions

• Need to access the user accounts from previous installations

  I am running Windows XP Pro, and I have installed new software.

  When I have it ran for the first time my PC crashed. Now, whenever I try to load it up it just keeps restarting before you get to the login screen. Safe mode does not help you, or doesn't last known good configuration. There is no recovery point recorded.

  I searched online for help and tried to repair the Windows version by inserting the CD and choose 'Repair', but there is no repair option. He wants me to install a new version of Windows on the partition, which, from what I understand, going to wipe my user accounts. It would be a big problem, as I have a lot of data out there that is very important for me who is not saved. My fault, still backward, etc. No not after the sympathy, just stating the facts!

  I also have Windows XP 64 is installed on a separate partition, and I loaded this up to see if I can see the user account I want to access. I can. But I can't access it because it is password protected, and it just comes up saying 'access denied '.

  So, how do I gain access to this user account? Doing anything to the working version of XP64, either by repairing the other partition inactive?

  All welcome, no matter how much of a long shot it is advice. I'm getting desperate!

  Thanks in advance.

  Hi Malkeleah,

  I had real problems trying to get Knoppix to work. I downloaded on my laptop, then had to put on a USB key to burn on the PC with Win 64 on (portable DVD player is read-only), but I couldn't do burn. I kept of burning errors using the built-in burner after first unpacking the ISO on the laptop (no support ISO native in Windows XP), or when I tried to install on win 64 the system burning software I got error messages saying: the software wouldn't run as soon as I clicked to install it. And Yes, I checked that I was using the software compatible 64-bit! No idea what it was, the 64-bit version has never really been used, not even well why it is installed.

  In any case, after that much hitting my head on the office followed a couple of pints in pubs, I managed to find another way around this problem, which was to take ownership of the files according to the instructions on the Microsoft Web site:

  http://support.Microsoft.com/default.aspx/KB/308421

  It worked wonderfully for me, and I have been able to support Windows 64-bit, re - install XP 'normal' and then appropriated again under that. 2 files come with errors and would not sell the property, but they were not even remotely important if everything is good. I got literally thousands of other files that flies over without any problems.

  In any case, thank you for taking the time to help me, I'm sure that your method would have worked if I had been able to create a CD (I would have posted off the coast for one if everything else has failed because they will send one in the world for any $2 IIRC), but for someone else who did a search and found my ad the above that I mention is worth a go as an alternative method.

  And no, I didn't have the encrypted files. Just locked the account of some simple password protection.

  Thanks again,

  Chris.

• Cannot access the user account

  I recently sent my computer in my college of departmental it to update some software. They could not access my account due to a password. They bi - passed this by making two accounts 'Test' and 'comments'. If I'm going to one of these accounts I can go to c:\Users[user-name]\Music\iTunes\iTunes and I can see my old account named "owner". However when I connect 'owner' is not an option for a click for a login account. All my old files are always under the account of 'owner '. How can I get back "owner" as I use an account to which?

  Read this and see if it helps:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Help! Cannot access the user account control settings!

  I have disabled UAC today because I wanted to delete some files. However, it did not work so I went back and tried to click on UAC to allow him once again, but I can't. The UAC window is not pop up. Help please!

  I also created a new account but I couldn't access the UAC on this account either. I restarted my computer 2 times already. What should I do?

  Here you go:

  1. keep tapping F8 during the first phase of startup.

  2. select Repair from the menu.

  3. Select an administrator account, and then enter its password.

  4. When you are prompted, select System Restore.

  5. set Windows to a point before this problem occurred.

• Satellite M300 PSMD4A - Windows Vista is unable to load the user accounts

  OS: Vista Business 32 b
  Model: Toshiba Satellite M300 (PSMD4A)

  Problem: When I turn on the laptop it charges upwards which is usually the login screen, but it does not display * all * accounts of users and, therefore, it is impossible to connect!
  Survey: I started the computer in safe mode, that the logging in process works very well. I thought it might be a mistake with the scanner finger print driver device manager still had no problems with it, but I discovered the + security processor loader driver + had the error code read 24 ' + this device is not present, is not working properly or is not all its drivers installed + ' I couldn't find something online that explains how to fix this error.

  Note: I said that the splash screen was previously empty and contained only the vista background startup and loading icon turns with the words "+ Please wait +" and a flick every now and then as if failure to sign what ever he was having problems with. I don't know when that changed sypmtones as now he did not come with please wait and an icon of spinning but rather with + just + ease of use and close buttons.

  Cry for Help: If anyone of you has an idea of what I should try to do that would be much appreciated. If you need more information please just ask.

  Thank you

  HM, that's a good question

  I think I can t really help you, but have you tried to reinstall the operating system from the Toshiba Recovery disk?
  I think that after that the problem needs to be solved.

  Maybe someone else can explain, why they have this error or has another idea.

• UNABLE TO ACCESS THE USER NAME PASSWORD

  I AM the ADMINISTRATOR AND I HAVE SET a PASSWORD FOR IT.

  ALL OF A SUDDEN, I CAN NOT CONNECT TO MY PASSWORD I CAN STILL REMEMBERED

  LUCKY I HAVE OPEN A GUEST ACCOUNT AND I CAN CONNECT USING THE SAME PASSWORD BUT I CAN'T DEFRAG BECAUSE I NEED TO BE AN INORDER TO ADMINISTRATOR TO LOG THAT BELONGS TO ME.

  I TRIED TO USE THE USB OR BLANK DISCS AND IT SAYS CAN NOT.

  HOW CAN I GET IT AGAIN? PLS HELP TQ

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your system repair CD. If you do not have one, ask a friend to burn you through the control panel / backup and restore. It takes less than five minutes.
  3. Press a key when prompted to boot from the CD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point when you were able to log in.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

  By elsewhere, together write messages all uppercase is known as SHOUTING. Many respondents do not like being shouted at.

• I'm unable to access my skydrive account, I get my user id and password but when I try to access the skydrive page it just flickers and flashes a canned red shield in the address bar.

  I'm unable to access my skydrive account, I get my user id and password but when I try to access the skydrive page it just flickers and flashes a canned red shield in the address bar. I managed to go into the live account and change the password, so I know that the connection details are correct. I can access my hotmail account.

  I signed up for skydrive two days ago and have loaded the documents that I cannot now reach!

  original title: skydrive connection problem

  Forum on SkyDrive here:

  http://windowslivehelp.com/product.aspx?ProductID=6

• Access to the USER account

  Hello

  Unable to access user account! So I have to go as a guest! How can I get access in the comments, I type the password as an administrator as the user account is the administrator who is the account that I can't access!

  Suppose I want to remove the password so that I can access it again, but do not know how...

  Sorry, but all history is somewhat strange.
  Maybe a stupid question now belongs but this laptop you or are you trying to access the laptop computer that belongs to someone else?

  I mean, you know the correct password, and I don't understand what the problem is here.
  What model of laptop do you have?

  Another question: did you create recovery disk for your laptop? Without correct password, you will not be able to start the installation of HARD drive recovery too. It can now be quite problematic.

• remote VPN and vpn site to site vpn remote users unable to access the local network

  As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config

  The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.

  ASA Version 8.2 (2)
  !
  host name
  domain kunchevrolet
  activate r8xwsBuKsSP7kABz encrypted password
  r8xwsBuKsSP7kABz encrypted passwd
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  PPPoE client vpdn group dataone
  IP address pppoe
  !
  interface Ethernet0/1
  nameif inside
  security-level 50
  IP 192.168.215.2 255.255.255.0
  !
  interface Ethernet0/2
  nameif Internet
  security-level 0
  IP address dhcp setroute
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  No nameif
  no level of security
  no ip address
  management only
  !
  passive FTP mode
  clock timezone IST 5 30
  DNS server-group DefaultDNS
  domain kunchevrolet
  permit same-security-traffic intra-interface
  object-group network GM-DC-VPN-Gateway
  object-group, net-LAN
  access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
  tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  MTU 1500 Internet
  IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  enable ASDM history
  ARP timeout 14400
  NAT-control
  Global 1 interface (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  AAA authentication LOCAL telnet console
  AAA authentication http LOCAL console
  AAA authentication enable LOCAL console
  LOCAL AAA authentication serial console
  Enable http server
  x.x.x.x 255.255.255.252 out http
  http 192.168.215.0 255.255.255.252 inside
  http 192.168.215.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto-map dynamic dynmap 65500 transform-set RIGHT
  card crypto 10 VPN ipsec-isakmp dynamic dynmap
  card crypto VPN outside interface
  card crypto 10 ASA-01 set peer 221.135.138.130
  card crypto 10 ASA - 01 the transform-set RIGHT value
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 65535
  preshared authentication
  the Encryption
  sha hash
  Group 2
  lifetime 28800
  Telnet 192.168.215.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 5
  Console timeout 0
  management-access inside
  VPDN group dataone request dialout pppoe
  VPDN group dataone localname bb4027654187_scdrid
  VPDN group dataone ppp authentication chap
  VPDN username bb4027654187_scdrid password * local store
  interface for identifying DHCP-client Internet customer
  dhcpd dns 218.248.255.141 218.248.245.1
  !
  dhcpd address 192.168.215.11 - 192.168.215.254 inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  Des-sha1 encryption SSL
  WebVPN
  allow outside
  tunnel-group-list activate
  internal kun group policy
  kun group policy attributes
  VPN - connections 8
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value split tunnel
  kunchevrolet value by default-field
  test P4ttSyrm33SV8TYp encrypted password username
  username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
  username kunauto attributes
  Strategy Group-VPN-kun
  Protocol-tunnel-VPN IPSec
  tunnel-group vpngroup type remote access
  tunnel-group vpngroup General attributes
  address pool VPN_Users
  Group Policy - by default-kun
  tunnel-group vpngroup webvpn-attributes
  the vpngroup group alias activation
  vpngroup group tunnel ipsec-attributes
  pre-shared key *.
  type tunnel-group test remote access
  tunnel-group x.x.x.x type ipsec-l2l
  tunnel-group ipsec-attributes x.x.x.x
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
  : end
  kunauto #.

  Hello

  Looking at the configuration, there is an access list this nat exemption: -.

  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0

  But it is not applied in the States of nat.

  Send the following command to the nat exemption to apply: -.

  NAT (inside) 0 access-list sheep

  Kind regards

  Dinesh Moudgil

  P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

• access to the user account without password via Remote Desktop Conncetion

  Hello, I have a question for remote desktop connection.

  I have two computer, let's call them computer (XP pro) and computer B.  And A computer user account has no password created.

  If I activate the remote desktop on A computer (computer a user account has no password) and try to access it remotely from computer B, is it possible to connect? or I won't be able to connect?                      I have A computer user account password to allow remote access from any computer?

  If anyone can help me with the answer, I would appreciate it!

  Thank you

  I'm sorry, but the user account must have a password to use the remote desktop connection. Boulder computer Maven
  Most Microsoft Valuable Professional

• Admin has no access to the user account

  I have a XP Pro computer where a user profile directory has no access at all to administrators: only for himself and system.

  Is this normal and supported? How can this be achieved?

  When I create a new account on this computer, the profile directory allows access to administrators.

  The problem is that I want to use some backup software that runs as administrator, so that it cannot properly access the user's data.

  NT Backup of the Microsoft can save everything without problems.

  I would so understand, I can ask the author of said software to backup to fix, or my setup is weird way and is.

  Thank you

  -pa

  You could remove rights administrative account to any file or folder on the computer while you could do this for a profile.  If you leave rights system alone, Yes, the built-in backup function still works.

  However, anyone with administrative rights could just as easily give themselves rights of return...

• XP has changed the user accounts is now impossible to access the administrator account

  Something has gone wrong when changing my user accounts. I don't have an administrator account can create a. I can't even restore my system. It doesn't let me do anything! What to do Help!

  You use the built-in account named "Administrator"?  If so, the behavior you describe is "a feature, not a bug."

  Windows XP hidden administrator account when a user account is created (because it's a good idea not to use administrator systematically; it should be saved for emergencies).

  You access the administrator account integrated differently depending on whether you have XP Home or XP Pro.

  For XP Home:

  You must restart in Mode without failure.  Restart the computer and start typing the F8 key as soon as the initial startup process is finished.  If you see the Windows logo, you waited too long and you have to restart again.   If you do it right, you will see the white Advance Boot Options menu on black (image).  Use the up/down arrows and the Enter key to select Mode safe because your mouse does not work on this screen.  Once the computer starts in Mode safe mode, the administrator account will appear on the Welcome screen.  If you have not changed the password, the password is blank (no password).

  For XP Pro:

  Follow the signs for XP Home Edition, or in the Welcome screen, with no logged-in user, press CTRL + ALT + DELETE twice.  The 'classic' logon box will appear.  Type "Administrator" (without the quotes).  Once again, the default password is empty.

  Once you enter the administrator account, create an account with "computer administrator" privileges for occasions when you need (for example, to run the system restore or create accounts).  You can use any name you want (other than Administrator), such as MyAdmin.

• Error during indexing account administrator-"the user profile Service has no logon. Unable to load the user profile.

  Original title: I can't connect to my admin account
  Windows 7 - whenever I try to login on my admin acc it appears ("service user profile Service does not have the logon - user profile cannot be loaded") and do not know what that could have been and how to solve this problem, I have not tried anything yet if someone can please help me. I also connect to a standard ACC and cannot do anything because when he asks me my admin pass I put it in and nothing happens.

  Hello

  This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.

  Run the diagnostic tool for Fixit for the article mentioned below and if it solves the problem.

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon.
  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Let me know if you need more assistance.

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't access my user account even if the password is correct.

  I was not able to access my user account even if the password is correct. It happened to our 2 admin represents, so now we only use the guest user account.

  Hello

  Something must have corrupted these accounts.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  These problems and similar bugs can help:

  A temporary profile is loaded after you connect to a Windows Vista-based system
  http://support.Microsoft.com/kb/947242

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  Try these to erase corruption in the case where it plays a role.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Other methods:

  Use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK then go back
  and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the same for others
  accounts that may be difficult. If necessary you can also reset your password in the accounts.
  Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Get the Error Message: "user profile service service has no logon. Unable to load the user profile"after you remove the Windows Vista administrator account

  Original title: deleted Vista ultima. admin identity and admin authorization password for standard users will not work.

  I inadvertently deleted the admin. identity, I think in Vista Ultima. The photo shows still on the identities, but when I try to open the identity I get the following message, "user profile service service has no logon. User profile cannot be loaded. The admin. password does not work in any of the other identities now, so I can't do updates to most of my programs, such as windows. I can't open the control panel to add and change of identity.

  Hi JBRA47,

  You can consult the following Microsoft KB article and check if it helps to solve the problem:

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.