Explorer Internet not working not properly
I have model A60, everytime I open my internet explore there (active X control) security warning below address bar comes and due to this i could ' t open my email in hotmail and yahoo. If anbody has any suggestions, it will be nice.
Hi Vinay,
Tell you what version of the operationg system you run or what version of IE, but please check your settings in Internet Explorer under TOOLS-> INTERNET OPTIONS and then click the SECURITY tab, and you should be able to display what you have enabled or disabled ACTIVEX controls.
You will need to set these to activate ACTIVEX work in Internet Explorer on your laptop.
HTH
Tags: Toshiba
Similar Questions
-
Explorer Internet not working not
Only application error click ok to close the message. Have tried, but each time the internet explore launched message is there and he can't get through.
Help, please
Hi Sara,.
For clarity on the issue, please answer the following questions.
- Did you change your computer before this problem?
- What is the version of Internet Explorer installed on your computer?
This problem can be caused due caused by inappropriate security or modules settings does not.
I suggest you consult the steps mentioned in the link below to fix this problem.
Check out the link to solve the problems of Internet Explorer to IE quick, safe and stable.
http://Support2.Microsoft.com/mats/ie_performance_and_safety/
See also the link what to do when Internet Explorer is not running.
http://Windows.Microsoft.com/en-us/Internet-Explorer/IE-crashes-stops-working#IE=IE-10-win-7
This link has the troubleshooting steps as installing updates, turning off Add-ons, reset Internet Explorer, reinstall Internet Explorer.
Disclaimer reset Internet explorer:
Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.
-
Pane Windows and Internet Explorer does not properly
Original title: sidebar and internet explore
Internet Explore Don t work correctly. I Don t know what to do. What happenend a long time ago. I Don t remember, but I fixed can´t. Also my windows sidebar. I ve use of programms to order commercial advertising on my PC and began the trouble is. I think that if I have stiked one or several spyware or something like that. I hope you can help me to fix this.
Hi golemanalex,
1. what exactly happens when you open Internet Explorer?
2. you receive messages or error codes when you try to access Internet Explorer and Windows Sidebar?
You can try an online scan and check if it helps:
Check out the link:
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Windows 2003: Explorer does not properly without remote desktop
The following image shows the screenshot of Windows Server 2003, when connected using Remote Desktop connection, using the administrator account.
If I connect without Remote Desktop, means going directly in my server room, and then log on by using the same administrator account, as you can see in the following screenshot, no office, no taskbar. But, I can press Ctrl + Alt + Delete to run the Task Manager.
I have to wait very long for the office and the toolbar displayed. The problem occurs only when not using remote desktop to open a session.
How to solve this problem, without having to reinstall Windows?
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Internet Explorer does not work correctly?
My Microsoft Internet explorer is not working properly and I had some problems with viruses that have been resolved. I use Goodgle Chrome to do what I have to, but that's all. I use Yahoo mail and cannot do so with Internet Explorer? What can I do to clean Internet Explorer?
You should review seriously use IE for anything other than Windows Update. It's a malware magnet. Firefox or Chrome with blockers of advertising would be a better choice.
Unfortunately, I do not have malware. I just never get everything... maybe 1 or 2 in my life.
I would like to have your PC checked by an expert from malware. They're at BleepingComputer.com (the creators of MalwareBytes and other malicious software utilities)... Tell them what you told me in the I'm infected? forum and they give you a certificate of good health.
-
Although Internet Explorer seems to work and is usable, I get an error that says Internet Explorer is not working properly and will be closed. . Is not always close because it threatens too but sometimes it is. Any solution please? I have Windows Vista.
Hello
1 did you change on your computer before this problem?
2. What is the exact error message?Follow the suggestions and then check out.
Method 1
You can optimize the settings of Internet Explorer.
How to optimize Internet Explorer
http://support.Microsoft.com/kb/936213/no
Method 2
You can reset Internet Explorer settings.
How to reset Internet Explorer settings
http://support.Microsoft.com/kb/923737
Note: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will delete browsing history, delete all temporary Internet files, cookies, form data and password especially all stored
-
I uninstalled firefox, but impossible to reinstall because the internet explore is not work
I wanted to reinstall firefox so I went to add/remove prog. and deleted.
Now, internet explore is not working. I don't know how to tell if its disabled because of firefox making previously.
The reason to install it again was because he stopped to hold my passwords.
I have a second computer that I use to communicate with you.Hi zaqzaq,
You can download the installer of firefox (http://www.mozilla.org/en-US/firefox/new/) on your second computer, copy it to a flashdrive and then install it on your first computer.
I don't ' think that firefox does nothing to internet explore. The only thing I can think is that you may have firefox as default browser. However, would not prevent Explorer to work. If your question is about what's wrong with explorer, it might be useful to a microsoft forum.
-
Help, INternet explorer does not work after windows update
One day, the computer automatically downloads and installs the programs that are recommended by microsoft windows.
After installation, my INternet explorer does not work.It reads:
Windows could not access 'ie.redirect.hp.com '.
Windows received an HTTP error message: 403 (refused).
-> If this problem is consistenly prevent windows to connect to several sites on the Internet, contact your network administrator or your ISP.Then I click ok, and then try to go on 'www.google.com '.
It still does not work, so I click on diagnose connection problems
This time, it reads:Windows not found no problem with the network connection on this computer.
You want to report the problem to Microsoft? Additional details about what went wrong can help create a solution. The report will be sent the next time you go online.
Send informationBut when I send, I can not because I have Canon go online on my Internet Explore.
When he first stopped working, I could use the system restore, but after a few months I dropped and now I can't restore the system to a place that it worked fine.I also know that this problem is not the administrator of network or something like that because I downloaded Firefox when IE stopped working, and Firefox works fine.
I tried everything, but I can not do it by myself, so help please!
@ceda only: See...
Help: I got hacked. Now what should I do?
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxBackup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!
HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxOther useful references include:
HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121cHOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2bTip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029
NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exeSee also:
Measures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspx~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Internet Explorer does not work after you install the kb2761451 update
Original title: I downloaded the update and now Internet security security update kb2761451 explore does not open. So I deleted it and Explorer opens. This update is listed as important. What should I do?
The Explorer is 9.
Hello
Thanks for posting the question in the Microsoft Community!
Internet Explorer stops working after the update kb2761451 is installed.
The problem may occur if the updated components are corrupted.
I suggest you follow the steps mentioned below:
Method 1: Of reset Windows Update components
See the site:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2: run the Update of the system analysis tool
See the site:
System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008
http://support.Microsoft.com/kb/947821
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
my computer was working fine until what I downloaded IE9 now my internet explore does not work it keeps saying file cannot be found or does not exist I am running windows vista 32-bit, how do I uninstal he and reinsall my old version of internet explore, I wish I had not downloaded in the first place
The instructions are here
http://Windows.Microsoft.com/en-GB/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9
-
When I open a web page that has a PDF file a pop up appears saying: internet Explorer does not work. I use to open the web page before and was able to look at the PDF file. What can I do to solve this problem.
original title: PDF filesGo to http://www.adobe.com and download the Acrobat reader software. If you still have problems, you can use the Firefox browser which you can download from http://mozilla.org .
Good luck.
-
How do I update Windows if my Internet Explorer does not work?
I've got Windows 5.1 Service Pak 3. I can't:
1 Windows Update
2 access Internet Explorer or
3 confirm my McAfee anti-virus without the foregoing.Does anyone have advice? Thank you!
Hi BethCullinane,-What happens when you try to access Internet Explorer?-You get an error message? If Yes, indicate the same.-What version of the operating system are you using?-What version of IE are you using?-Have you been able to launch Internet Explorer successfully with no problems before?-Have you been able to update without any problem before?-You did any recent changes of hardware/software on your computer after that you started facing this problem?Method 1: Try the steps listed in the article to resolve the problem of Internet Explorer.Method 2: Due to Windows Update, see the following article: -
Windows Explorer does not work properly and hold all the time
I have Windows 7 Professional as a platform. In the end, I find windows Explorer does not correctly and hold all the time. Pls advise on how to solve this problem. Note I am not a computer Savvy and I need a step by step approach.
Thank you for your time and enjoy your time.
.
Hello
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at stored by -
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
Professional, comprehensive and Enterprise edition)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Desktop icons not working/Getting Internet Explorer has stopped working Message also
I'm having a problem with my desktop icons. The first time, I use a desktop icon to enter a site when I first you register my lap top everything works but when I close the site and try to open another icon on my desktop, icons no longer highlight or open. This just started today. Ran a comprehensive analysis with Norton 360, but he found nothing. Also in constant trouble with my internet explorer. Download internet explore has stopped working message. Is there a way to fix this?
I tried your suggestion about resetting my internet explore. Follow the link that you provided, and it worked. All my icons work (opened and closed several times to double check). Also my internet has regained its original speed. Thank you very much!
-
Why present it a form button does not work in Internet Explorer, but not in Chrome?
We send the forms to the offices that use IE and Chrome. Offices using Chrome recently, do not get a popup email, when you click the Send button to send the completed form. We use Adobe Acrobat X Pro to create forms. Anyone else see this issue?
Chrome has a built-in PDF Viewer that supports some forms, but it is far from being as comprehensive as Acrobat/Reader. Drive used to be used as a plug-in for Chrome, but he cannot stand that, unlike IE again. Chrome supports subjecting them to a web server, which is more reliable than the use of electronic mail, but it does not properly handle a TOT of the server response.
Maybe you are looking for
-
HP envy 120: range of printers hp envy 120 t - it have blue tooth
My 120 hp envy printer has bluetooth connectivity
-
Satellite 300 CDT - need to update BIOS
Looking for a driver to update BIOS for Satellite 300CDT model PA1261EYX-FR95 that I bought in France a few years ago. Or, would like to know the reference of 128 MB memory module
-
Touch Pad Driver for Satellite A50?
I reinstall my old Satellite A50 with Win XP without the recovery CD can not find a match with the model or S/N on the Toshiba support pages well. The touchpad driver I downloaded (pointing device Alps, worm 6.0.303.4, dated the 11.12.2003) seems to
-
Problems with different e-mail addresses and the different Apple ID
Hi, I have some problems with the different Apple ID and e-mail addresses connected to them, and I hope someone can help me in what to do. First a primer on my Apple ID ***@me.com - it's my account General iCloud (backup, iMessage, Facetime etc.). **
-
DAQmx custom scale: How do you define minimum and MAXIMUM values?
Hello everyone, I am currently using LabVIEW 2010 and meet the following problem with DAQmx custom scale: first, I created a custom linear scale (ordered originally = 0, slope = 50) and then a string that uses this scale. The real signal acquired fro