Explorerframe.dll and Explorer.exe errors

Similar Questions

• Blue Screen Error Code Caused by hal.dll and ntkrnlpa.exe 9F.

  original title: BSOD error Code Caused by hal.dll and ntkrnlpa.exe 9F.

  Currently, I'm having a problem on a Fujitsu T1010 with Windows Vista x 84 installed tablet. At a random time that I use my computer, I get a generic blue screen with information DRIVER_POWER_STATE_FAILURE. The error code is 0x0000009F (0 x 00000003, 0x86f692e0, 0x86f692e0, 0x865a6598). BlueScreenView.exe, I see that the root causes are hal.dll + 997f and ntkrnlpa.exe + f5b28. So far, I've had 14 accidents. I run the driver verifier and the causes are hal.dll + 726c and ntkrnlpa.exe + 2ea5a7 windrvr6.sys + 0. Any help is appreciated! Thank you.

  Timothy

  Hello

  References to Vista also apply to Windows 7.
  
  Updated drivers, BIOS and software control (if any) is a good idea.

  This is my generic how updates of appropriate driver:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - reset after each
  installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Explorer.exe error

  Hello

  I have HP Pavilion e002au laptop bought about 5 months back with Windows 8.

  I get the explorer.exe error after logging in each time. The laptop seems to work normally, but can someone please tell me what this error is and how it can be eliminated?

  I have an original version of Windows antivirus updates and get regularly.

  Is it dangerous for the laptop?

  Kind regards

  Vikram P. Gupte

  Hi Vikram6880,

  During the execution of any type of control system, you should always back up your documents. The update affects all documents. It was simply an update of the system.

  Thank you.

• Explorer.exe error of Application the Instruction at '0x7c910ed2' referenced memory at 0x03ede088.

  always get this when I try to open certain files? any suggestion will be good?

  Explorer.exe error of Application the Instruction at "0x7c910ed2" referenced memory at "0x03ede088", the memory could not be 'read' click OK to terminate the program, click CANCEL to debug the program

  I also have error of Application Explorer.exe the Instruction "0x7c911689" referenced memory at "0 x 04180000", the memory could not be 'read' click OK to terminate the program, click CANCEL to debug the program

  Good.

  Not sure what it is yet, but you know what it is not.

  I don't know what to think of your permissions problem, but if records are read-only and not meant to be, are you not able to change the folder properties and what happens when you try to do?

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
  You can Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to act normally, you'll know that some extension you just disabled in this group of 3-5 is the culprit, then you can start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.

  Disable them one at a time or in small groups (to make things go faster) until your right click does not generate an error, and then restart and try again.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• Explorer.EXE error after the restoration of the ERD Commander

  Dell Inspiron B130

  Windows XP Service Pack 2

  Recently performed a HD format and new installation of XP SP2. After I installed all the drivers and others, I checked that the system was operating normally. After a few days of use, Windows Update downloaded Service Pack 3 and asked me to install. I started to install SP3, but at about 50%, the laptop battery is dead at Midway through the installation. I plugged the laptop on the power source and power. I restarted the laptop and XP started only a completely black screen and the white slider. No ALT + CTRL + DEL, desktop icons, etc.

  I rebooted the laptop of ERD Commander, ran the restore system and selected the first available Restore Point. Point of restoration chosen was recorded a few days before, and was the first recorded point after the clean installed XP. I rebooted the XP system. Wallpaper loaded with white cursor, but NO start menu or desktop icon. A message appears saying "Explorer.EXE Application error, press OK to exit the application" or something very similar. Did not write the error code, but can get if necessary. If I press the OK button (which is my only option), there is still no icons on the desktop or the start menu. Only the cursor. No access ALT + CTRL + DELETE or something like that.

  Thinking about completely wipe the system and reinstalls the operating system. Any suggestions before I jump in this solution?

  Explorer.EXE error after the Restore Point of ERD Commander. Dell Inspiron B130. Recently clean installed XP SP2 on laptop. Installation of SP3, to 50%, battery dies the laptop right in the middle of the installation of the SP3 update. Restarted, XP starts with black screen with cursor only. ERD restart order and restore XP to the last known good config (I choose point immediately after XP clean install). Reboot to XP. Now the wallpaper shows as well as the error message saying "Explorer.exe Application error, click OK to exit Explorer" dialog and then I can't access anything. Any ideas?

  Hello

  What is the full and exact error message?

  Step 1: Check if you are able to boot into safe mode without any problem. If you are able to boot into safe mode without any problems then try to perform the clean boot to safe mode. Also disconnect any external devices connected to the computer.

  Reference:
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Step 2: If you are still having the same problem, then you can the steps at the bottom of the article.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• My CPU runs at the age of 100% of use and explorer.exe is 93% _

  How can I solve this problem? I tried scans, I cut my startup programs. Explorer 8 is my problem? I need help please?

  Internet Explorer and explorer.exe are two different things - explorer.exe
  is what is used when opening Windows/computer explore / your user profile
  Such problems can be difficult to nail - but the most common cause is
  probably of malware any.
  You say you have run some scans - what? You must run a full system scan
  with you to update anti-virus and at least a spyware cleaner - MalwareBytes
  Anti-Malware is current best-of-breed.
  Second cause is a problem with the hard drive:-run a CHKDSK
  of right search box and see if it says errors - if it runs then one
  elevated command prompt and run CHKDSK /F (windows will work say that it cannot)
  Run now and ask to start after reboot - answer Yes and restart).
   
  Third is the file system - a high command prompt and the command prompt
  type SFC/scannow - and wait until it is finished, what might be some
  time.
   
  See if that lot helps and post back with the results.
   
  Good luck
   
  --
  Noel Paton
  CrashFixPC
   
  Nil Carborundum Illegitemi
  www.crashfixpc.co.UK
   
   

• Satellite A300 - w c:\windows\system32\rpcnet.dll and rpcnet.exe recognized as Trojans

  Hello

  while I was scene analysis antivirus on the laptop Satellite A300-15 b, my software recognized w c:\windows\system32\rpcnet.dll and rpcnet.exe as Trojans and deleted. These files are essential?
  How can I get back them? If someone of you cannot answer, I'd appreciate any help.

  Hemoth

  What anti-virus software are you using and have you updated to the latest list of detection of virus/trojan?
  To retrieve these files, you can use the windows repair console, which can be entered by pressing the F8 key before the windows operating system starts.
  Will take you to a list where you repair or somehow mode called option.

  If this does not work, you can try using recovery media.

• We monitor windows servers using pdh.dll and we receive "error PDH 0xc0000bc6:9 - > data are not valid" a few times in the meantime.

  We monitor windows servers using pdh.dll and we receive "error PDH 0xc0000bc6:9-> the data is invalid" a few times. Need to understand what causes this and how to fix the same.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winserverManagement/threads

  Hope this information helps.

• Windows live gallery encountered an error loading WLXPhotoViewer.dll and cannot start error code: 0 x 80070035

  Whenever I try to open a picture/photo, I get this message "Windows liver Gallery encountered an error loading WLXPhotoViewer.dll and cannot start error code: 0 x 80070035. Around her, the only is to save the file, then open it with another program. I'm frustrated because this is a nuisance and time-consuming. Any suggestions please?

  Maybe the exclusive database is corrupted.

  Read the following article.

  (944221) freezes Windows Live Photo Gallery
  or does not start
  http://support.Microsoft.com/kb/944221/en-us
  (according to version, database can be
  Pictures.PD4, Pictures.pd5 or Pictures.pd6)

  Rename the Pictures.OLD file will force Live Photo
  Gallery to create a new database on the next launch file.

  Know that the gallery will be as it was the first time that you
  open and some metadata and labels may be lost.

• How can I fix this error - Windows Live Photo Gallery encountered an error loading WLXPhotoLibraryMain.dll and cannot start - error Ox800736b1

  When I click on Windows live Photo Gallery to satart - I get the follwing messge.

  Windows Live Photo Gallery encountered an error loading WLXPhotoLibraryMain.dll and cannot start - error Ox800736b1

  How should I do?

  Hello

  The question you have posted is related to Windows Live Photo gallery and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:

  http://www.windowslivehelp.com/product.aspx?ProductID=20

• Windows Vista starts with white screen - dwm.exe and dllhost.exe errors on the hard drive.

  original title: freezing after login! ... disk hard dwm.exe and dllhost.exe errors. As usual load screen and then nothing can be used/open to all. Occasionally start opens and closes and nothing else beyond.

  Cannot use the laptop mode safe mode with networking. Have you tried to repair registry free of bugs and using Vista install with view to repair OS repair disk, but there are a lot of people having this problem different from this problem with dwm.exe dwm.exe or versions/varieties. This is is produced immediately after the download and installation of Microsoft Updates I might add.  Please can someone help?  Thank you very much... LiZ :)

  Never use Registry Repair programs.

  They can cause more harm than good.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Explorer.exe error in the ntdll.dll module

  Event type: error
  Event source: app error
  Event category: no
  Event ID: 1000
  Date: 18/10/2009
  Time: 17:28
  User: n/a
  Computer: CROSSROADS
  Description:
  Failing application explorer.exe, version 6.0.2900.5512, failed module ntdll.dll, version 5.1.2600.5755, address failure 0x000101b3.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data:
  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 65 78 70 exp ure
  0018: 6 c 6f 72 65 72 2 65 78 lorer.ex
  0020: 65 20 36 2 2 30 32 39 e 6.0.29
  0028:30 30 2 35 35 31 32 20 00.5512
  0030: 69 6 20 74 64 6 c 6 c in ntdll 6f
  0038: 2e 64 6 c 6 c 20 35 2e 31 .dll 5.1
  0040: 2e 32 36 30 30 2e 35 37.2600.57
  0048: 35 35 20 61 74 20 6f 66 55 to of
  0050: 66 73 65 74 20 30 30 30 000 fset
  0058: 31 30 31 62 33 0a b 101, 3 0D...

  also get the explorer.exe in comctl32.dll errors, gdi32.dll, kernel32.dll, shell32.dll in successive attempts to restart.

  PSHersh,
  Thanks for posting on the Microsoft answers Forum.  The first thing that I would suggest you do is run the System File Checker.  The link below will provide information on this tool.  You want to run the "SFC/scannow" option  You will need your XP CD for this tool in case we need to correct all files.
  http://support.Microsoft.com/kb/310747

  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Explorer.exe error, Normaliz.dll is missing

  When I try to start my computer, I get the above error. I get the same when starting in safe mode. The only thing that works is the Task Manager. No desktop icon just a white screen. Where should I start

  In Task Manager, you can click file, hold down the CTRL key, and click New task and that opens a command prompt (or the boot safe mode with command prompt).

  If you have your copy of normaliz.dll on a USB key which is the D drive (for example), and XP is installed on your C drive, you can then type in something like this:

  Copy d:\normaliz.dll c:\windows\system32

  When the copying is completed successfully, you will see a message like:

  1 file (s) copied

  You can always do since if Task Manager:

  If you see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  It is in the case Log:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Description:

  Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

  You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

  If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

  You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

  The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

  Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

  You also will be able to properly run a browser on the system afflicted to go on Internet download one.

  There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

  You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

  If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

  When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

  Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

  If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

  TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

  If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

  Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

• Explorer.exe error black screen

  Hello
  I have to tell you all that I am not good at tech or computers, so please bare with me.
  My drive has been recently cleaned. I restarted my pc and I got an error "explorer.exe application error".
  There is also an error in dll C:\Windows\system32\WerConCpl.dll
  My screen is black, however, I can use internet through the Task Manager.

  When I tried to find explorer.exe in Task Manager, the error message came again. He can't run the application because it could not start properly.
  Any advice?
  Thank you.

  Hello Alex,.

  We are here to help.

  Explorer.exe application error may be similar to Windows Explorer has stopped working. You can follow the steps of troubleshooting provided on this link.

  You can also run repair.

  Let us know how it goes.

  Thank you.

• How to rid an Explorer.exe error in my netbook Sylvania model Synet 07526-R applicatiopn

  The Ocean is a Windows CE 6.0. When I turn on my netbook from Sylvania model Synet 07526-R. a small window pops up saying: it has an explorer.exe Application error and has shut down but it never does. is someone can you please help me remove this Application error.

  Hey Lopez,

  Your question of Windows CE is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT audience Pro on MSDN. Please post your question in the Windows Embedded Compact forum. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/category/windowsembeddedcompact

  You can also check out the link below.

  Working with processes and Threads in Microsoft Windows CE 2.1