Export batch with conversion

Similar Questions

• Export batch, a .dng exports in much larger size than the others?

  Hello!

  I'm on Lightroom, Camera Raw version 5.6, Yosemite 10.10.5 5.6. I just did an export batch of 34 images with a size limit of 200K image file. Images resized to 1500px on the short side, 72 dpi.

  One of the images - ironically, one I had not manipulated at all - threw an error - ' Could not create a JPEG that reached your limit of 200K bytes. " All others - light, dark, who were DNG or images that have been the PSD files, color and b & W - were very good. But this one image wouldn't do it.

  When I turned the file off the power limit, it has exported to ~3.5 MB. 1500 x 2250 JPG.

  The DNG file size is 11.6 MB, which is actually on the lower end of the size of typical file of all the DNG in the group. It has very few keywords.

  This is an uncropped image, but so are the others.

  I even tried to open it in PS and PSD compact version, and then export that. same thing.

  Let me repeat that it is a lot, so the export parameters are the same in all areas. Looks like it is something specific to this image.

  Thoughts?

  I would ignore the file size of JPG photos, this is a totally meaningless number.

  Lightroom offers you correct photos when you export, I've never seen a case where Lightroom gave bad exports.

  Yes, the specific image made a difference, specifically some content image can be compressed more than any other image content. Again, the size of the file is totally meaningless.

• Trouble with conversion email from POP to IMAP Comcast: Code: 800ccc0f

  Original title: POP IMAP conversion

  Trouble with conversion email from POP to IMAP Comcast:

  Code: 800ccc0f
  Your server suddenly put an end to the connection. Your IMAP command could not be sent to the server, due to non-network errors.

  I'm on Windows 7 Home edition, Service Pack 1.

  Using e-mail with Comcast Email Client programs
  http://customer.Comcast.com/help-and-support/Internet/email-client-programs-with-Xfinity-email/

  Instructions for:

  Outlook Express
  Outlook 2003
  Outlook 2007
  Outlook 2010
  Windows Mail or Windows Live Mail
  Windows 8
  Mozilla Thunderbird
  Mail for Mac
  Eudora

• PS_Exec (P): Error of the command batch with reason: no such file or directory (2)

  We have symantec pgp installed in our system and trying to decrypt a file through the app engine.

  our process procedure.

  1 FTP the source files.

  2. search files

  3. use pgp to decrypt the file by file

  trying to decipher runs aground and always gives following error

  PS_Exec (P): Error of the command batch with reason: no such file or directory (2)

  When I run the same command using the command line it goes thru very well.

  running order: decrypt pgp - q - passphrase "xxxxxxxxxxxxxxxxxxxx exit»--/data/staging/bank_statements/Reconciliation_files/BAI2_20150618155803.bai.asc--/data/staging/bank_statements/Reconciliation_files/BAI2_20150618155803.bai.

  any help is really appreciated

  Hi all

  I finally understood what happened. The installation of PGP directory is located in/usr/local /. So we moved the installation from this location PS_HOME location and he started to work very well.

  so our installation location current symantec pgp is pgp/PS_HOME /.

  Another point to note was if we are trying to encrypt or decrypt using PeopleSoft PSExec() and these files are under/usr directory structure order Symantec PGP fails to do. the same command works fine through command line, but not through PSExec(). Indeed, the user has full access, but even he couldn't do anything. . But if we use our own custom directories the file gets encrypted and decrypted as you wish.

  Hope these little things help.

• How to export PNGS with 300 res using Applescript

  How to export PNGS with 300 res in Applescript

  I want to copy an art and paste in the new document and export in PNG to the location on the desktop & file name should be my previous doc were I copy file form. and the saved file must be filename_PNG.png

  the value ((path to desktop) saveLocation as string)

  Tell application "Adobe Illustrator"

  If not then turn on

  If (County documents) > 0 then

  the selection from the active document selectedItems value

  If selectedItems is not {}, then

  copy

  the active document color space the color value

  do the new document with properties {color space: color space}

  dough

  end if

  end if

  tell the end

  Tell application "Adobe Illustrator"

  tell document 1

  the value visible limits SelectedArt

  the rectangle value Board chart of the artboard 1 SelectedArt

  export the current document for the file newFilePath as PNG8 ¬

  with options {class: PNG8 export options ¬}

  , color County: 64 ¬, ¬ reduction: web color

  , ¬ dither dither: color model

  , prevaricate for cent: €50

  {interlaced: true}

  close the document assets registration No.

  tell the end

  tell the end

  You will need to set the 416,67% (both horizontal and vertical) scale. Default export at 100% will give you a 72 dpi PNG.

• Export DNxHD with 8 channels audio multi... Problem! the final file only stereo all mixed with 6 empty strings.

  I export DNxHD with 8 channels audio multi... My problem is that the final file all mixed in the first 2 stereo channels with the channels empty rest 6.

  I'm lost on what could be the problem.

  The main audio channel is 8 channels... NO stereo.
  Export, I chose DNxHD and audio 48000 Hz with 8 output channels

  
  What could this be? I need to deliver a film with the 8 mono channels.

  Really appreciate all the thoughts/help!

  Thank you

  Christian

  That's how I would implement mixer in CS6's using a sequence of 8 track with 8 mono channels (mono channels using maintains levels matching, stereo and standard tracks can cause differences in level of 3db). Note the Red output channel selection and the panpot position indicated in blue.

  

• Rendering and export failed with an unknown error because of the color of Lumetri?

  I am rendering & export failures with an 'unknown error' code within Premiere Pro and Media Encoder.  I think that the problem is related to the Lumetri color filter that is widely used in all of the timeline.  There are hundreds of clips and each clip has 2-4 color filters Lumetri applied.  Each clip also has the red giant Cosmo and filter FilmConvert Pro 2.36.1 coming to overlap (visually underneath by order of effects filters Panel) all filters from Lumetri.  The reason why I believe that the problem is related to the Lumetri color filter is that it is the first time that I use.  Previously, I used the filter red giant Colorista III coloring, but last week decided to try using the Lumetri color for the same effect.

  Please let me know if anyone has had similar experiences, what were their solutions, or if someone has some ideas on how to solve this problem.  I would really appreciate the help!

  System details:

  Windows Pro 64-bit 10

  Intel i7 5960 X 8-core 3.0GHz (cooled water and too quick to 4.2 GHz)

  64GB 2133 MHz DRAM (non-ECC)

  2 x Nvidia GTX 980 4 GB GPUs (not in SLI)

  Intel 750 PCIe 400 GB SSD (for BONES)

  SSD Pro 1 TB Samsung 840 (for Adobe Cache)

  SSD Pro 1 TB Samsung 840 (for export)

  Matrix RAID 5 of 48 TB (eight 6 TB HDs with MegaRAID, LSI 9361-8i card) (for media)

  Information on the timeline:

  1920 x 1080 (original video files are MP4 UHD scaled down by 50% in the timeline)

  23.976 fps

  CUDA Mercury Render Engine

  Length of the sequence: 14:30

  I have discovered a workaround of sorts.  I noticed that when rendered in PP he would make progress before a failure (the green line that precedes the timeline would get a little longer).  If I saved this progress and rebooted the system, then tried to make it again, it would make a little further.  I've done this dozens of times for 4 hours make completely a 14:30 long sequence.

  I noticed doing this routine that my CPU was maxxed on all rendered.  Resource monitor reported the use of CPU to 143% continuous (all other indicators RAM, disk speed, etc. were well under their maximums).  This brings me to suspect that maybe there is a problem with overheating of the CPU.  But who would be closed for the entire system, correct?

  Once the entire sequence has been made (all the green lines above clips) I tried export by using the "Use preview files" option enabled.  Failure again.  I tried export uncompressed AVI, Quicktimes and PNG sequences.  All have failed.  I tried to export to PP as well as TEA.  The two have not.  I tried to export with option 'To make maximum quality' is enabled.  Surprisingly, this product the longest time encoding managed (32 minutes before failure).  As by chance, using the option of MRQ kept my CPU loads sawtoothing between 100% and 75%, then maybe there's something to the CPU overheating theory?

  In an ultimate attempt desperate to save my video project (looming deadlines!) I divided the sequence of Assembly in five servings (I cut on the melted white or fade-to-black transitions) and exported to each of them.  This copy export times within 20 minutes.  It worked.

  I noticed this another Adobe Forums thread that seems to speak of the similar difficulties with effects of Lumetri in Creative Cloud 2015.  Perhaps the Lumetri effects are not ready for prime time?

  https://forums.Adobe.com/thread/1236018?start=0 & tstart = 0

  Please let me know if anyone has any ideas on this.  In the meantime, I'll wind up this project and never use Lumetri effects again.

  Hello Kevin,

  Thank you for offering help to solve this problem.

  I was able to export the majority of the sequence with all the Lumetri effects, red giant and FilmConvert mixed in clips.  After the sequence using the tedious method described above I segmented the sequence in the quarterfinals; all exported except one.  I divided it into two; Another exported doesn't have.  I cut half too, once again only half exported without failure.  I finally reduced the embarrassing part until a second sequence clips 35; an interview with green screen with superimposed titles and superposition of b-roll clips.

  I removed all the effects of the Lumetri of these clips and replaced by Red Giant Colorista III effects, which are very similar to the effect of Lumetri in the GUI and application.  The sequence made completely without "unknown error."  Then it was exported successfully (and used about 70% when compared to more CPU activity 110% with the Lumetri to export).

  The difference would be that the effect of color of Lumetri has this YUV icon next to it in the effect controls panel?  Which means that YUV?

  The problem is perhaps not totally related to the color of Lumetri effect (as I said, I was able to export the majority of the 14:30 sequences use, although gradually by segmentation of the sequence into smaller portions), but if the move is a solution then I'll use it.

  I lost a day to fix this.  If this thread is useful to someone else, then it was worthwhile.

• Export MXF with several audio channels for broadcasting

  Hello

  I work in a company of broadcasting as a Publisher. We have always used FCP with the free plugin sony xdcam to export. This plugin seems to be one of the few ways to export a MXF with 4 audio channels. I don't know exactly why we need to export it for broadcasting with 4 audio channels, but we do.

  Given that our workload has increased significantly in recent months and it will no longer are optimizing our workflow. We also work with many different endboards in After Effects, and we made a nice model to work with. And since AE and first can make a dynamic link we are considering changing from FCP to Premiere.

  Now the question arises! : the only obstacle that we could not find a response to export it with 4 audio channels as a MXF of first CS5. Will there be the development on this level for CS6?

  A solution to this should save us a lot of time!

  Any help will be very appreciated!

  I've also attached an example for standard MXF files we export

  

  CS6 now allow export desired in native mode.

• Export JPG with NO exif, 'Except' comments

  Export JPG with NO exif, 'Except' comments

  * I find that for a number of things I export LR with no. Exif JPG files, but must KEEP comments in the Exif data.

  Why? you ask...

  (1) forums, when I want to post a JPG with Exif of NO... BUT when I post comments automatically post comments or Description of the photo.

  (2) I Upload files jpg with no exif of a Magazine I take party photos for... and on the comments section is where I list the names of the people in the photos.

  * Even on sites like SmugMug and glitter... Comments get downloaded... but sometimes you don't want the EXIF on everything.

  areohbee wrote:

  Consider that minimize metadata integrated export is not enough, minimal huh?

  Minimize embedded metadata is TOO small, right? (wipe the comments too).

  Looks like a good FR.

• NO batch export emails (with the exception of one at a time)

  Cannot export files in a batch by e-mail. Des/export addon does not install. Is - it is no longer possible? I don't want my profile or just an e-mail sent from a different computer to my laptop using thunderbird as well. I use to be able to drag them on a USB key in a heap. Should I reinstall TB?

  Find what exactly? I never had no problem with the ImportExportTools add-on - we. https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

  The first thing I would do after installing an add-on is look for it under Tools | Modules to ensure it had installed, and check if she had all the settings or options that would be useful or important to me. In doing so, I would allow it, of course if for some reason, it was not already enabled. This particular module has many parameters to consider.

• Once a problem with Muse export to HTML - conversion in Helvetica in preview.

  Hello! I'm new to Muse and I'm trying to see how to export to HTML works. Unfortunately, whenever I export my site in HTML, it converts all web fonts, I used (I got of Typekit), in Helvetica when he gets a preview. The fonts must be Europa and Josefin light. What should I do? Am I missing some crucial steps?

  Thank you very much!

  Hello Kwokyi94,

  Please refer to the link below with a similar discussion.

  Fonts Typekit does not export when I 'publish to HTML.

  Kind regards

  Vivek

• How to get help with conversion ROCK on the export of PDF?

  How can I get help with the quality of the PDF documents converted to word format export.

  Not likely to have, you're doing a "happy dance" but a scanned image is "the ear of the sow" and (Yes, I'll say).

  You can't have a scholarship of silk in one ear of the sow.

  Make you a picture of the text content. You get a result of OCR of all that is recognized. The character by character recognition accuracy is generally quite good. But - No image/photo file actually holds information on format, layout, fonts, etc. - it's just a picture. Acrobat OCR makes some assumptions about all this.

  -You have a bunch of each of the characters being exported to Word. Individual characters, not paragraphs, sentences no, no words, no values "white space", etc.

  So you get an export that is a "best estimate" of the less desirable source. Sometimes, it isn't so bad. Sometimes it's just awful. In all cases, you will need to do some cleanup of the exported content that landed in the Word file.

  The alternative is to transcribe the hardcopy to the Word file.
  In fact it can often be higher as a workflow rather than the scanning-ocr-export-cleanup shuffle

  .

  For really nice export "spot - we ', you must start with a PDF file from an application of creation (not a scanned image) which is a well-formed tag PDF (for example ISO 14289-1, PDF/UA-1).
  The purpose of the tagged PDF document is not only Accessible PDF is also how PDF supports actively the re-use of content (for example, export).

  Be well...

• problem with the files of exported data after conversion from 10.1 to 10.3 OPA OPA

  Hello
  
  If all goes well a relatively simple question
  
  We have recently acquired access to the OPA 10.3
  
  We have previously developed a 10.1 modules which we imported 10.3 using the upgrade features. This one is designed to be an interface from machine to machine and as such is entirely dependent on the Fed data to make decisions, there is no question screens or interviews.
  
  Then, we have tried to import some ".xds" files we had created to 10.1. There are more than 160 of them, including in general more than 120 items of data in each with multiple entities and bodies.
  
  When we import in 10.3 you get an error message which reads:
  
  
  + "System.NullReferenceException: object reference not set to an instance of an object." +
  
  + Oracle.Determinations.Remote2.Util.LegacySessionDataXDSImporter.ReadEntity (XMLStreamReader reader) +.
  
  + Oracle.Determinations.Remote2.Util.LegacySessionDataXDSImporter.ReadSessionData (XMLStreamReader reader) +.
  
  + Oracle.Determinations.Remote2.Util.SessionDataXDSUtils.ImportSession (SessionData sessionData, Rulebase rulebase File xmlFile) +.
  
  at Oracle.Modelling.Debugger.Core.UI.DebuggerRunView.btnImport_Click (Object sender, EventArgs e) + ' + '.
  
  the simple solution is for us to reintroduce the '.xds' files in the debugger, but given that it it took over 2 weeks for our team at the entrance of the '.xds' in the first place, we would obviously like to explore other options first!
  
  Any help or ideas would be greatly appreciated
  
  See you soon
  
  Dave

  Hi Dave,.

  I have this working on the copy of the modules I've had, it's because your entity / relationship public names do not match the .xds, probably because of the upgrade file. I sent you an email on this subject.

• I bought the PDF Export. The Conversion to word is not acceptable to send to the client. I want to cancel this service

  How can I cancel the export to PDF program I bought last night. I tried a conversion to Word and this is unacceptable. !

  Hi wardp96881839,

  To cancel the subscription, you must follow the Contact Customer Carelink, sign in using your Adobe ID

  Make selections below: -.

  

  Click on the "still need help?" Contact us'button to start a chat with our customer support team, so that they can help you cancel your subscription.

  Kind regards

  Nicos

• Export image with legend of cursor

  Hello

  I need to export to MS word waveform graph. To do this, I use the property of node Invoke 'Export picture'. During this operation, single chart area is exported and not with the legend of cursor. In my report, I need to show some slider values. So please can someone let me know, how to do?

  Thanks in advance.

  I have the same behavior with LV86 and 2009.  Maybe you could use the invoke node image.

  JM