Export BW less than contrast

I work with film scans large format (.psd averaged ~ 800 MB) and when I have high contrast scenes my exports out flat and less contrasted. A lot of black and dark tones look more grey when exporting. Exports seem to always amazing, but not what I eventually worked hard to produce in lightroom. I exported as tiff 16-bit, 8-bit tiff, jpeg 100% quality and even as a .psd. I imported all of these exports in photoshop CC and they all have the same problem (none is better than the other in terms of having the original level of contrast in lightroom). I even tried to increase the contrast by about 50 (looks terrible in lightroom), but export is slightly different. What happens here? Any thoughts?

Thanks in advance,

Patrick

patrickg38753126 wrote:

My question is, if the relief of blacks because of the excessive sharpening etc. is applied to two exported image files and preview of the library, then they would not look the same?

Not necessarily. You resize the image to export file? In your response #4 the two images in the screenshot are similar. There is a very light brightening the export image. BTW, do you say, IMAGE LEFT: lightroom developmentmodule p. "The screenshot shows the comparison of LR mode, which renders the image file using the overview of the library module and module development one NOT extracted.

However, the details about the amount of 150, 63 detail panel settings, 8 Luminance and color of 0 are certainly causing loss of black level. This should also be obvious if you switch back and forth between the module development and library to Fit Zoom viewmodule. The overview of the library module will look lighter. You can only adjust the sliders of the detail panel while watching the image in Zoom 1:1 mode. Now try the same - back and the rear view of the image between the library modules and to the point. No correct difference? This is because the view Zoom 1:1, the image is not resized and pixels of noise are not integrated with the pixels of the image (i.e. black light areas) data.

Tip of the day

When to adjust the sharpening controls hold down the ALT key to see better what is happening in the image.

Tags: Photoshop Lightroom

Similar Questions

  • I can't do my less than 1.46 MB jpeg files

    Why are my JPEGs so great? I can't make less than 1.46 MB for a 1200 x 1800 image even when I put the 'quality' to '0' (bass), IE files of smaller size of 0. I've updated to the last CC of Photoshop and the previous version allowed to have smaller jpeg files sizes, in the low 100 KB instead of MB. What is happening, please?

    Lance.

    You use file > export > export as?

  • Songs to jump himself and backup battery less than before

    Hello Sir/Madam,

    I'm David. I have an ipod touch 6th generation, I've updated to firmware ios 10.0.2. I am confronted with these questions when I updated to ios 10 songs automatically you click previous track when I haven't touched and backup battery lasts 1 day before I used to get more than 2 days. He could use someone to help me get rid of these problems I face.

    Try:

    -Reset the device iOS. Nothing will be lost

    Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

    ten seconds, until the Apple logo appears.

    Unsync/delete all the music and Resync

    To remove all music go to settings > general > use > storage > storage management > music > tap Edit in the top-right, then press the sign less than all music

    -Reset all settings

    Go to settings > general > Reset and tap reset all settings.

    All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

    -Restore from backup. See:

    Restore your device from an iCloud or iTunes backup - Apple Support

    https://support.Apple.com/en-us/HT204184

    -Restore factory settings/new iOS device.

    If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem or there is a bug in iOS.

    Shop Apple Store - Genius Bar

    https://www.Apple.com/retail/Geniusbar/

  • How to return the highest value in a column of numbers less than a given number

    I am a beginner using formulas in number.  I have an inventory in a Numbers spreadsheet (v3.6.2).  Inventory numbers are in a column.  I need to view the last number used or the highest number less than a given value.  In my case, it is 9000.

    I can put a cell to return MAX and it's cool, but I need to know the number < 9000, MAX.

    Hi JS.

    SEARCH is your friend here. One of the properties of the LOOKUP function is that it accepts a 'close-match', which is defined as the largest value less than or equal to the search value.

    Formulas:

    A2: LOOKUP (8999.9999999, D)

    B2: LOOKUP(9000,D)

    C2: MAX (D)

    Kind regards

    Barry

  • No option to choose less than 360 p on youtube in Firefox, but in IE options are available.

    Latest firefox does not an option in youtube for any video affecting less than 360 p. When I use IE, it gives you all the options of configuration from 144 p. Other sites using firefox it is choice in the video settings of all yet EI did not. My last version of firefox was ok but now this new version gives very little choice in the matter. What can be done to solve this problem.

    Hello, you can try to install the adobe flash plugin: install the Flash plugin to display videos, animations and games

  • I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update.  After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset on AEC

    I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update.  After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset to factory settings and it still doesn't load. There's just 1%. Help, please.

    Thank you

    Katie

    It is under warranty. Suggests taking it for an Exchange.

  • My site optimized (22-59K) uses a grid for layout system. It takes 10 + seconds in Firefox 7,8,9 to load, other browsers need less than 1 second. Y at - it other that to use a 2-column layout, some recommended grid with which Firefox gets along?

    Someone commented ago about 9 weeks for my site to load very slowly. I tried and had no problem.

    But a few days ago, I realized that the first call (after rebooting the system) in Firefox 7, 8 and 9 of Firefox Firefox takes 10 + seconds (white screen) while other browsers have need of about 1 second. After the initial call each page loads faster than in other browsers.

    Without content management system, I got the same results. In simply removing things from the grid of my stylesheet, pages loading less than a second. I tried other grids http://cssgrid.net/, http://www.webdesignerwall.com/demo/simpler-grid/940grid.html , but had the same number.

    A identify the extension that is causing the problem in your case?

    He is always unpredictable, how the extensions behave with a new version and in case of problems you can contact the developer of the extension to inform him about the problems.

  • Tecra A11 - less than 10 ips in Skyrim on

    Hello
    I have a Tecra A11 i7 which came with a wiped HARD drive
    I installed win 7 pro and the drivers from the Toshiba site, including the pilot Intel Turbo Boost Technology.

    Even with all the settings set to low temperatures, vid Skyrim runs only less than 10 frames per second.
    I upgraded 4-8gig ram, but this did not help.
    The GPU is Intel, so I can't use Geforce experience.

    I have a Dell Vostro V131 i5 which takes place to better Skyrim.
    But the screen is smaller and i/o ports are 90% of dead, so I'd rather use the Toshiba.

    There are 4 "unknown devices" in Device Manager, but none of them look relevant.

    Does anyone have any ideas?

    Thank you

    To be honest, I have no reasonable explanation because I don't have this video game and can not test it on my Tecra A11 - 19M.
    In my opinion this Tecra is typical business very bad for the games and the machine for office work.
    It does not offer good graphics performance and it is not the best for gaming.

    I use it for daily activities and games use different model Satellite P with nvidia GPU.

  • I'm taking classes online and since the new UPGRADE to 4, I can't download PDFs from the site unless they are less than 2 MB. It downloads for a few seconds then stops and no message appears.

    I connect to online courses. I click on the link to a PDF on the site. It gives the message it is downloading, then stops. With less than 2.0 MB PDF files load, but nothing more.

    No chance that your school uses Blackboard / WebCT?

    If so, Firefox 4.0 has not been certified as being compatible with this software.

    See this page in Blackboard KB to see which version of Firefox is certified for the version of Blackboard Learning System Vista or THIS used in your school.

    http://KB.Blackboard.com/pages/ViewPage.action?PageID=45581177

  • HP15-g088ca: HP 15 laptop computer purchased less than 2 years ago. Broken hinge, display cases of separation. HP, please help.

    My son uses his laptop computer HP15 home to his office, rarely transporting.  He never gave it and a sweet user.

    The left hinge seems to be broken / defective, and separates the window.  For now, we are all leaving the screen open all the time, but it's a little awkward and the problem is certainly on a laptop less than 2 years old.

    Looking at the forum, it looks like a common problem.

    We are fans of HP in general, so I hope that this problem can be solved.

    Help, please.

    -Steve

    Hooray!

    HP solved the problem free of charge, including shipping in both directions and repair.

    It took ten days in total, and we used the laptop without a problem for about 10 days more.

    It seems that the hinges for laptop and the display case were entirely replaced, and no data has been lost.

    My son is thrilled to have his laptop in return, and to my eyes, HP just went through.

    I wouldn't hesitate to buy another HP product, although I confess in the hope that:

    (1) HP manufacuring no longer uses defective parts

    (2) HP treats everyone with this problem of hinge with the same care

    Thank you and HP support HP!

    -Steve

  • How to create a formula to ask if something is both greater AND less than a range

    Don't know how to ask the question, but here's what I want to do.

    In a formula, I need an 'if' statement asking us:

    IF "cell id" is greater than "$ 100" and less than "$ 200", IF - TRUE, IF - FALSE.

    I don't see how the question of both the code < and=""> in this formula. I tried the instruction AND within the formula, but getting syntax errors.

    Hope the question makes sense, thank you.

    Hi Dwegs,

    It is a way

    IF (AND (A2 > 100, A2<>

  • I bought an iphone 5 c less than 2 months ago, and even if I don't use a lot of storage, I still almost nothing GB, what it can be?

    I bought an iphone 5 c less than 2 months ago, and even if I don't use a lot of storage, I still almost nothing GB, what it can be?

    Apps, music, images, even the contacts you add etc - all of these things take a valuable storage capacity on your phone.

    Your backup device, delete it and then restore from the backup, maybe this will help free up space.

    Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  • Satellite P100 - 324 BIOS reports less than real memory installed, why?

    I have a P100-324 Satellite which I installed 4 GB of memory.
    Memory is a Kingston KVR667D2S5 / 2G, so I installed 2 of them.
    I've updated the BIOS, but still when I press F2 to access the configuration
    I find that the less than 4 GB installed memory. It makes account
    3070 MB. When using windows the systeminfo program reports 4096 MB RAM.
    However, System properties, it shows 3.0 GB and that is because
    It is 32-bit windows xp mce. I ran live fedora 7 x 64 and he reports only 3 GB as the bios.
    Why? Is there a way to fix that.

    Please look here, here's your answer:

    http://support.toshiba-tro.de/KB0/TSB7601WE0007R01.htm

    Lex

  • Select start measurment only if the temperature is less than 26 ° C for 10 seconds

    Hello

    I have a program for a measure of viscosity/temperature use DasyLab 12

    I burn my brain to try to activate the measurment only if the temperature is less than 26 ° C for 10 seconds.

    Click on 'Start', then control the temperature, if the temperature stay below 26 ° C, for 10 sec then allow to click the button "start measurment.

    If this isn't the case, restart the control.

    Thanks in advance!

    Ivan

    Simply enter the channel number. If this string has a name, DASYLab will automatically replace the figure.

  • How to call dll com APIs that range from the performance counters of less than 1 ms with CVI and always get less timer resolution of 1 ms

    Hello

    I've created a dll com in VC ++ using performance counters/timers to less than a millisecond.

    This is useful when you send a message to very high speed. (say 10 or more)

    This is done by the dll.

    When I use CVI to create a user interface, this dll runs at a fixed rate of 1ms.

    This slows down the application.

    I tried to use the same dll with VC ++ host and it works well.

    I need to check the registry setting to see if the useDefaultTimer is set to false or TRUE.

    (I'm not near the development PC) However, by default, it should be FALSE and I have no fidle with it.

    Veuileez post any suggestions you might have.

    Thank you!

    This problem is now solved for me.

    Just the highest thread priority in the dll.

    Thank you if you had the answer.

Maybe you are looking for

  • IPhone 6 IOS update question

    I have updated to the latest update of IOS and I encountered a problem.  When the phone restarts, he invites me for a password.  The problem with this is there was no access programmed into the phone just the finger print ID code  I tried different p

  • Installed update app

    I have a problem for a long time now. One of my friends gave me a cool app, it has purchased, through USB key. Of course, I need his Apple ID, to install updates. I didn't ask him his ID and password, so I decided to uninstall the application. The pr

  • OMEN of HP: HP OMEN does not illuminate

    As the title know, my laptop OMEN not illuminate. The power adapter is pluged, the charge light is on, but when I press the power button, nothing happens!

  • DMA between host and target FPGA is not supported for this remote system.

    I try to cover with my FPGA (on the cRIO-9002) of the RTO.  I have install upward of anOpen good VI reference without error, but as soon I try to access thefifo I error-63001 and the attached message wrote: Error-63001 occurredat reference FPGA VI op

  • OfficeJet Pro 8620: No Internet connection / Proxy request

    The screen has a yellow triangle with a! on the first icon on the bottom row. When I click it, I get an error message saying: no Internet connection and asking if I have a Proxy, which I did not. The problem started about a month when I noticed the p