Export command is not available

Similar Questions

• E-mail 'export' feature is not available.

  You want to transfer the e-mail address book from an old XP computer on the computer newly purchased with windows 7.

  Used IE6, export function was not available.

  Then downloaded and installed IE8, the 'Export' of e-mail addresses function is still not available.

  After clicking on 'File', there are two words 'Import' and 'Export' - but with a lighter color, is not available.  When click on them - nothing happens, because that is not available.

  Can anyone help on this difficult problem?  Thank you.

  Using Outlook Express? If yes her you need to export from Outlook Express inside.

  Outlook Express Backup information

  Outlook Express tips, tricks and Secrets for the backup and restore:
  http://email.about.com/od/outlookexpressbackuphelp/

  MS KB:
  How to backup and restore Outlook Express data:
  http://support.Microsoft.com/kb/270670/en-us

  How to change the default location of mail and news files:
  http://support.Microsoft.com/kb/307971/en-us

  Inside Outlook Express (backup and restore):
  http://www.insideoe.com/backup/

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• speech recognition - "this command is not available now"...

  I have windows 7 with office 2010 and when I try to say commands, such as select Word or correct the word or ordering another new paragraph I receive a message of this command is not available now... when it will be available? also, when dictating a sentence, if I stop it capitalizes the next word in mid-sentence... How can I fix that? and don't forget that I can't use the exact word or select Word... it took me twice as long to make this letter with speech recognition, of the type just... I read on these forums, I googled to death and please please please do not direct me to another forum... I set up my micro I did the tutorial and additional training, I looked over the options and others and I can not understand how to fix... the exact same question was asked and the person who answered just said set up the microphone, the tutorial and the additional training and as many links to forums... I clicked and traveled all the links and the answer may seem not available as to why my speech recognition accepts not my orders... Please answer and if you don't know, don't send me on a forum's wild-goose chase...

  The solution to your problem is to click the speech recognition microphone, first before you open Word.  Once the speech recognition is started, right-click it, click options, select Notepad of dictation and then open Word.  If you do it in this order, everything should work correctly in Word.  Notepad will not come to the top.  The command everything will work directly in Word itself.  If you open Word first before the speech recognition and do not have Notepad - "command not available" will come.  I hope this helps.

• How to unlock objects in spread? My can´t objects be moved (stand picturesboxes and text boxes), and the control/opt/L command is not available. Anyone know how to do? Maria

  How to unlock objects in spread? My can´t objects be moved (stand picturesboxes and text boxes), and the control/opt/L command is not available. Anyone know how to do? Maria

  Try trashing preferences. See replace your preferences

  And please turn off or remove the autoquote bey email for the answer. Thank you.

• Export / Zoomify sometimes not available

  I am using CS5 and I have some jpeg images I want zoomify, but the Zoomify export option is not available. I have not had this problem before and compared the properties of jpeg files and size other files that work but nothing stands out as a problem. Any tips?

  Thank you, you made my day

• Turn the command is not available

  I am creating a plug-in of automatism to rotate the image. Here's the code to invoke the eventRotate command:

  {

  PIActionDescriptor rotation_desc;

  sPSActionDescriptor->make(&rotation_desc)

  double degrees = 15;

  Rotate_error SPErr = sPSActionDescriptor->PutUnitFloat(rotation_desc, keyAngle, unitAngle, degrees); Here no error.

  rotate_error = sPSActionControl->play(&result, eventRotate, rotation_desc, plugInDialogSilent); / / returns the error-25920.

  If (rotate_error! = 0)
  display error message
  }
  The result of the Play call is a de-25920 rotate_error, (the "Rotate" command is not currently available.)
  Change of plugInDialogSilent to plugInDialogDisplay produces the same user interaction as the choice of Image-> rotation canvas-> arbitrary... from the menu, except that it fails with the error-25920.
  How to rotate an image from an Automation plugin?

  Here's what listener outputs for me and works on CS5. Your code didn't for me so please check this block of code.

  SPErr PlayeventRotate(/*your parameters go here*/void)

  {

  Result PIActionDescriptor = NULL;

  DescriptorTypeID runtimeKeyID;

  DescriptorTypeID runtimeTypeID;

  DescriptorTypeID runtimeObjID;

  DescriptorTypeID runtimeEnumID;

  DescriptorTypeID runtimeClassID;

  DescriptorTypeID runtimePropID;

  DescriptorTypeID runtimeUnitID;

  SPErr error = kSPNoError;

  Move it to the top of the routine!

  PIActionDescriptor desc0000000000000120 = NULL;

  error = sPSActionDescriptor-> Make (& desc0000000000000120);

  If (error) goto returnError;

  Move it to the top of the routine!

  PIActionReference ref0000000000000038 = NULL;

  error = sPSActionReference-> Make (& ref0000000000000038);

  If (error) goto returnError;

  error = sPSActionReference-> PutEnumerated (ref0000000000000038, classDocument, typeOrdinal, enumFirst);

  If (error) goto returnError;

  error = sPSActionDescriptor-> PutReference (desc0000000000000120, keyNull, ref0000000000000038);

  If (error) goto returnError;

  error = sPSActionDescriptor-> PutUnitFloat (desc0000000000000120, keyAngle, unitAngle, 33);

  If (error) goto returnError;

  error = sPSActionControl-> Play (& result, eventRotate, desc0000000000000120, plugInDialogSilent);

  If (error) goto returnError;

  returnError:

  If (result! = NULL) sPSActionDescriptor-> Free (result);

  If (desc0000000000000120! = NULL) sPSActionDescriptor-> Free (desc0000000000000120).

  If (ref0000000000000038! = NULL) sPSActionReference-> Free (ref0000000000000038).

  error return;

  }

• PNDH IP command is not available?

  Hello world

  I'll put up a 871 and I configured my tunnel0 interface, but I can't type in orders for ip PNDH.

  I currently have:

  interface Tunnel0

  bandwidth 1000

  10.10.10.20 IP address 255.255.255.0

  IP access-group 101 in

  no ip redirection

  no ip unreachable

  no ip proxy-arp

  IP 1400 MTU

  IP virtual-reassembly

  route IP cache flow

  IP tcp adjust-mss 1360

  dissemination of IP ospf network

  IP ospf priority 0

  source of tunnel FastEthernet4

  multipoint gre tunnel mode

  key to tunnel 10000

  Tunnel SDM_Profile1 ipsec protection profile

  end

  When I type in ip PNDH? I get an error of command not recognized.

  I have to activate before having the command available?

  Thank you

  Ali

  Hello

  A quick look at the function browser shows that PNDH must 'Advanced IP Services' or a "Enterprise Services IP" feature set. Or the other of those run you?

  HTH

  Andrew.

• Darwin.CLI: most of the cli commands is not available

  Most of the command-line to point 6.1 does not for example to vcloud led application 6.1

  
  list-cloud-tunnels' was found but is not currently available (type 'help' then ENTER to learn more about this command)
  

  Spring > create cloud tunnel

  Command "create cloud-tunnel" was found but is not currently available (type 'help' then ENTER to learn more about this command)
  Spring > cliversion
  vCloud Automation Center Application Services CLI 6.1.0 BUILD - 2064245
  Copyright (c) 2011-2014 VMwareInc. All rights reserved. This product is protected by the U.S.
  and the international laws of copyright and intellectual property.
  VMware products are covered by one or more patents listed in the http://www.VMware.com/go/patents
  Spring > display user

  
  "View user" command was found but is not currently available (type 'help' then ENTER to learn more about this command)
  Spring > list-cloud-tunnels
  'List-cloud-tunnels' command was found but is not currently available (type 'help' then ENTER to learn more about this command)
  Spring >

  Thanks for your help, you are right, but I didn't know how to do it. the documentation could be updated to reflect the it. Here's how I work.

  Login serverUrl- https://**.**.**.**:8443/darwin - [email protected] - password username *-tenantId tennantnamehere

  Thank you

  Niasse

• I want to print the data on the screen, even when the print command is not available

  When I active Meadia Player I'd like to be able to print a list of the songs in the library, Playlist, etc.

  Hi Whitepolarbear70,

  Thank you for visiting Microsoft Answers.

  I have some steps that may help you.

  Method 1

  Try to take a screenshot of the library. To do this, follow these steps:

  1 open Windows Media Player.

  2. open the library and click on the following combination of keys
  -Alt + PrtScreen/SysRq * (PrtScreen/SysRq is usually right next to the F12 key).

  4: open Paint or Microsoft Word, and then press the following key combination
  -Ctrl + V which will stick to the screenshot that you took
  3. adjust the size n PRINT

  Method 2

  You can try export playlist of media information by an application word by following the steps in the link below:

  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/HOWTO/mediainfoexp.aspx

  We inform you that you will install Media exporter info. This exporter is basically designed for Media Player 9 and would work for Media player 11.

  The process is a little different:

  Follow this workaround solution to install the exporter of media:

  Step 1 - Download and install Media exporter Info

  You can try to run the program in compatibility mode for Windows XP.

  Make older programs in this version of Windows

  http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx

  Step 2 - use of the exporter to export of information media

  Open Windows Media Player.  A small Media exporter Info window must already be open.  If not, you can open it manually: on the Tools menu, go to plugins and choose the exporter of News Media.  If you do not see the Tools menu initially, just right click somewhere on the blue bar dark near the top of your window of WMP.

  Click Properties to select where the file is saved and what application to load it in.  Will the file be formatted differently depending on the application you choose, but Excel is the best option if you want to clean it to show only the artist/album names (see below).

  Click Export.   The file will be exported, but it will contain much more than just artist names and album information.

  See the link given below where the user had a similar problem.

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/adc55535-e1a5-42E7-9EA1-f93c6334b523

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• TCL EXEC command is not available in the EEM scripts

  Hi all

  I'm writing a script that checks the ip address assigned to an interface (assigned by PPPoE Dialer) verifies a FULL domain name resolution and if the two IP match not retrieve a URL so update a dynamic DNS (I know that there is a support built into IOS for DNS, dynamic but it does not always work and I make sure that I can reach the router remotely).

  The question is when I run the script from the CLI, it seems to work when I save in the infrastructure of the EEM it seems certain command failed

  as exec or using the standard library of http.tcl:

  Is there a limitation? I couldn't find anything, and I know that what works in the TCL CLI interpreter working in the scripts of the EEM.

  Any toughts?

  Fabio

  11 Dec 08: 12:00.275: % HA_EM-6-LOG: ddnsupdate.tcl: invalid command name "exec".

  11 Dec 08: 12:00.275: % HA_EM-6-LOG: ddnsupdate.tcl: when running

  11 Dec 08: 12:00.275: % HA_EM-6-LOG: ddnsupdate.tcl: "exec" show ip interface brief | "exclude not assigned.

  11 Dec 08: 12:00.275: % HA_EM-6-LOG: ddnsupdate.tcl: called from inside

  11 Dec 08: 12:00.275: % HA_EM-6-LOG: ddnsupdate.tcl: "$slave $Contents eval.

  11 Dec 08: 12:00.275: % HA_EM-6-LOG: ddnsupdate.tcl: (procedure "eval_script" line 7)

  11 Dec 08: 12:00.275: % HA_EM-6-LOG: ddnsupdate.tcl: called from inside

  11 Dec 08: 12:00.275: % HA_EM-6-LOG: ddnsupdate.tcl: "eval_script slave $scriptname.

  11 Dec 08: 12:00.275: % HA_EM-6-LOG: ddnsupdate.tcl: called from inside

  11 Dec 08: 12:00.275: % HA_EM-6-LOG: ddnsupdate.tcl: "If {$security_level == 1} {#untrusted script.

  11 Dec 08: 12:00.275: % HA_EM-6-LOG: ddnsupdate.tcl: create an interp - slave

  11 Dec 08: 12:00.275: % HA_EM-6-LOG: ddnsupdate.tcl: interp share {stdin slave

  11 Dec 08: 12:00.275: % HA_EM-6-LOG: ddnsupdate.tcl: interp share {} stdout slave

  11 Dec 08: 12:00.275: % HA_EM-6-LOG: ddnsupdate.tcl:... »

  11 Dec 08: 12:00.275: % HA_EM-6-LOG: ddnsupdate.tcl: (file 'tmpsys:/lib/tcl/base.tcl' line 50)

  11 Dec 08: 12:00.275: % HA_EM-6-LOG: ddnsupdate.tcl: Tcl run policy has failed:

  11 Dec 08: 12:00.275: % HA_EM-6-LOG: ddnsupdate.tcl: invalid command name "exec".

  11 Dec 08: 12:05.599: % PARSER-5-CFGLOG_LOGGEDCMD: user: fabio connected command:! exec: activate

  11 Dec 08: 12:24.823: % PARSER-5-CFGLOG_LOGGEDCMD: user: fabio connected command: no event handler political ddnsupdate.tcl

  Hi Fabio,.

  EEM manages TCL Safe-TCL mode.  It is documented here:

  http://www.Cisco.com/en/us/docs/iOS/NetMgmt/configuration/guide/nm_eem_policy_tcl.html#wp1174624

  Exec is not allowed Safe-Tcl.  The right way to do this from EEM is to use the cli EEM library, open an ATS with cli_open, send the commands you want and read the responses using cli_write/cli_read or cli_exec, and then close the CLI if you want using cli_close or leave the end of the script.

  Mike

• Software for command buttons not available in silent mode

  Hi guys,.

  When we launched the setup in silent mode, does not include the software of the control buttons.
  There a way to select in a config file to be installed in silent mode by default?

  Thx for all!

  question 1: what model of laptop do you have?

  2nd question: which system do you use?

  question 3: what do you mean by silent mode? Do you mean the safe mode?

• Import / Export function in contacts windows 7 is not available

  To import vcf contacts in contacts windows 7, but the import and export functions are not available.

  Tried the trick of Vista (right-click in the folder > customize this folder > optimize to contact) but "customize this folder" is not available in this folder.

  At a higher level (c:\users\accountname) this option is available, but appying it will affect all THE files, I guess, so I won't be using that.

  It seems that the removal of the Customize tab is the default value in this folder.

  Even if I import export etc, I don't have the Customize tab.

  I checked it on three systems.

  By adjusting the registry as described below, you can activate it.

  This is the key to the Contacts folder.

  \PropertyBag HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\ {56784854-C6CB-462B-8169-88E350ACB882}

  In this key, you will see a NoCustomize Dword with value 1, change to 0 and you will see the Customize tab.

  As always can change the registry, if poorly done, make your system unusable.

  The backup key before you change and set a restore point
  

• No fade not available after Unsharp mask

  I have an action I use successfully for several years, notably with the PS CS5 64-bit.  Part of the action is an emphasis, then using Fade Unsharp Mask it changes brightness mode.

  Now I suddenly find that it does not work on some images... telling me that the 'Fade' command is not available.  Even if I do these commands manually (without the action and do anything else) bland is gray out and not available.

  Everything still works fine with my 'normal' images, which are files TIFF 16 bits converted from RAW with Capture One Pro.  These files are approximately 125 mb in size.  The image where I first noticed this problem was a multi point recorded in a PSB (almost 600 mb in size) file.  Then, I created a file PSD of this image (155 MB) and BLAND was still not available.

  And no, I do not have ANYTHING between performing the Unsharp mask and try to find BLAND in the Edit menu.

  I tested this during more than an hour now (on two different computer facilities, as well running CS5 64-bit and Win7 64 bit) and other than the size of the file, I don't see anything else.

  The file size might have nothing to do with this?  That's the only difference I see between an image work and not another job.

  (I am aware that I could use the layers palette to change the blending mode to luminosity, but it won't solve my problem).

  Any ideas?

  Thank you!

  Eldor

  You can not Fade bound a command on a layer that has a layer mask. You have to UN-link the layer mask to the layer pixel before fade is enabled...

• Mapped drives are not available. Machines inaccessible area. Can ping from command prompt.

  Hello

  Working in a Windows domain.  Have a 150 machines in the field.  Now, a single machine seems to have lost the authority to communicate.  This machine was a member of the domain for more than a year and has gained access to these places and several times of the mapped drives.  It's a user's machine, so not sure what may happen before this started.

  At the moment the machine is connected to the network.  I can browse internet fine (internet accessed through the default gateway).  At the command prompt I can ping machines on the domain by ip or name.  Both work very well.

  Can I use remote desktop to connect to other computers on the domain.

  What I can't see all the drives mapped or access the domain computers via Windows Explorer.  When I try to access a mapped drive (accessible by everyone) I gat an error message.  "The location is not available.

  When I try to select a machine in the field of windows Explorer I get 'open folder '.  \\XXXXX is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.  The specified network provider name is invalid.

  Tried this as multiple users.  Not the specific profile.  Tried under the Domain Admin and get the same error.

  Search error messages and found many solutions.  None worked.

  1 - removed from the field and joined.

  2 - disabled and enabled network card.

  3. cannot remove adapter, laptop.

  4 - withdrawn from the area, has changed its name, joined.

  5. deleted and added customer network Ms.

  6 checked svc of workstation was running.

  7 disabled the Windows Firewall.

  8. multiple antivirus scans run.

  9 - set network security: LAN authentication level manager' to 'Send LM and NTLM responses &'.»

  Any ideas?

  Thank you

  Found.  Want to share others.

  It was she.

  http://support.Microsoft.com/kb/170336/en-us

  The network logon order had disappeared.  Replaced by exporting from another machine.

• I've upgraded to Photoshop CC 2015.5.0 and now export > save for Web (legacy) is not available.  How to export an animated GIF?

  In Photoshop CC 2015.5.0 "Save for Web (legacy)" is gray, it is not available and I'd like to export a calendar box as an animated GIF.  I can export as video, but I don't see how to export to animated GIF format.  Help please.

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  You are on the bit depth of 8bits Document?

  If no, go to 8-bit