Export of custom presets to 'Share' of first Elements 9

Similar Questions

• Preset corrupted causing the first Elements 10 Crash

  I recently upgraded from Premiere Elements 4.0 to 10.0 PE. I was in the middle of several projects, all that I was able to successfully open/edit/etc in PE 10. However, a stabilizing effect that I had applied to clips in PE 4 has been appearing as "Offline (unavailable filter)" in the properties of the effect of the clip. This was not too much of a problem; I was just remove this effect and its replacement by a few tens of stabilizer, which seems to work in all cases better.

  I went to record all of the clip effects as preset for one of my projects (my custom presets don't transfer via 10) and included the "Offline (filter unavaible)" effect on the accident. After that I saved as a custom preset, whenever I try to go in the section "My presets" in 'Effects' first 10 breaks down.

  Does anyone know where the "My Presets" are stored on my computer so that I can go and delete this one?

  I looked through it and found the effects created for cutom location.

  You should before all PrE close and then go to the following location:

  %AppData%\Roaming\Adobe\Premiere Elements\10.0

  You will see a file named 'Effect Presets and Custom Items.prfpset', delete this file and then restart pre again.

  This should remove your custom created preset and will not affect the installed presets.

• Is there a way to delete custom presets? (First 11 Mac items)

  I have been experimenting with different output options for 1080 p and 720 p AppleTV and have created many custom presets.  I would like to get rid of many who did not give good results.  I have not found an option to remove presets custom tab share in elements11.  There is no available trash icon.  In addition, I have had no success in the predefined settings file.  Someone knows how to do this?

  Problem solved.  The predefined custom names, I used for testing were long and pushed the trash at the edge of the window icon.  By resizing the main window pre elements, I was able to see the icon and remove the unwanted presets.

• Question on first Elements 8 custom presets

  I have the first Elements 8. When starting a new project and through the presets, none match that my camera is recording. Is there a way to create a custom preset? I tried to start a new project and going to "Edit > Preferences > general" but it won't let me edit fields. I found an old thread where someone had something, you could download to add more presets, but it was a bad link.

  The video, I'm wanting to change is 1280 x 720, 59.4 fps, mpeg. But the camera (gopro HD) also has other options resoloution/framerate. I also have a Nikon D3s DSLR, don't know if there is a "Preset" for this I have not got that far yet. It will open and allow me to edit in the other presets, but I want it is good.

  I hope someone can help out me!

  Well, it is my opinion, based on my experience of 7 years with this program and hosting this forum.

  I guess that's you if you want to take it or not.

• First Elements 14 - publish/share for iPhone

  I just first elements 11 who had a choice of device called "mobile phones and readers' and presets slot for Apple iPhone... etc. These presets product suitably small files for use on an iPhone. They are missing in version 14. The smallest available device preset mobile is 1280 x 720 and produces huge files for an iPhone. You can share the settings for a custom preset that you created which produces a file size in the neighborhoof 9000 kb per minute?

  1280 x 720 is not at all too big for an iPhone. In fact, it's kind of the ideal size for a mobile device.

  As I showed you in my book on Amazon, you a video output for a phone or mobile device using Export & devices part, Mobile Device with HD 1080 or 720 HD resolution. This will produce an optimized MP4.

• Problems to export HD of first Elements 9 for Vimeo video (program plant or video is fuzzy)

  I have a 10-minute wedding video I am trying to export from Adobe first Elements 9 for download on vimeo. I followed the instructions in this video: export to upload to Vimeo with Adobe Premiere Elements on Vimeo for how to proceed. The first time I followed the instructions, the video file that results is fuzzy and blurry, not at all like HD video, I could see in the program prior to export. Since then, I tried to export several times with different parameters, and every time the program crashes when the video is approximately 95% complete. How can I correct this situation? It is a wedding video that I made for a paying customer who would like their video on vimeo as soon as possible.

  Thanks for your help!

  Let me know if you need more details or clarification.

  Laura

  Laura

  Sorry about that. I thought at first Elements 10, when you posted clearly whether you work with 9.0.

  It would seem that we are OK with the project preset

  NTSC

  DIGITAL SLR

  1080 p

  Digital SLR [email protected]

  for your import AVCHD or H.264.mov.

  In the Premiere Elements 9.0/9.0.1 share/calculation/QuickTime

  = NTSC 16:9 DV presets

  and as for the customization tab Advanced Settings button/video

  I'd go with the frame width 1920, frame height 1080

  and I would increase the flow according to the guidelines of Vimeo

  Guidelines of compression on Vimeo

  Even if you were to stay at 1280 x 720, I think that your flow of 5000 Kbps setting is too low. If you stay with 1280 x 720, I would

  Watch the kbit/10,000s to the value ' limit bitrate to. " If you go with 1920 x 1080, I would look at 10 000 to 20 000 Kbps, probably closer to 20 000 kbit/s.

  First determine if these bitrate increases have no effect on what you are looking for. Then, we will focus on the size of the file. Are limited to a given file size?

  Superior throughput, more quality, more the size of the file. You need to find a good compromise between bitrate, file size and quality.

  As a point of reference, which is the bitrate of the video that you import into the project? I saw a Canon T2i video sample that used something like 42 Mbit/s (megabits per second), in contrast to 5000 kbps (kilobits per second), which would be of 5 Mbps.

  Please review and consider.

  Thank you.

  RTA

• Quick share in first 10 items?

  Hello

  I just upgraded to first Elements 8 to 10.

  And miss me the 'Fast Action' feature, where I can store export settings carefully designed for later use. Where can I find the function "Fast Action" in PE 10?

  Thank you

  Konrad

  There is no quick sharing in vesion 10 feature.

  However, any custom output that you create by clicking on the button Advanced on a share of output page can be saved as a custom preset.

• AVI export in Full HD-Auflösung in first 10 PC non possible elements

  ICH really first Elements 10 auf PC und habe ein Projekt video in Full HD (1920 * 1080) standing.

  dass ich in bestmoglicher Qualität exportieren möchte, um are mit komprimieren zu Soerenson Squeeze.

  Der AVI export lasst bei mir keine Full-HD-Auflösung zu however. Wird das file by Werkseinstellung auf 720 * 576 egg.

  ES keinen Zugriff auf manual die Skalierung allows.

  Was tun?

  MIT welcher Einstellung in Full HD unkomprimiertem Audio exportieren und ich kann?

  Vielen Dank

  friedemannt

  Thanks for the reply.

  From what you wrote, I wasn't sure if you had imported somehow a Sorenson codec, so that it appears in your choice of video codec AVI under the button advanced the predefined to publish Microsoft AVI + share/computer/AVI. But I could not find anywhere Sorenson codec with the .avi container.

  If you want to Publish alternative export + share/computer/AVI, please consider: Lagarith Lossless Codec.AVI.

  Download and install the Lagarith Lossless video codec. Then, it will appear in the list of video codecs available under the Advanced tab of the Microsoft AVI preset button/video.

  Regarding the first Elements 10 opening in first CC project file, I don't have first CC to test this. I don't know if we are dealing with components of first Elements 10 outdated in CC. You can edit this message CC in Adobe Premiere Pro Forum to get feedback from users there.

  Premiere Pro

  But, perhaps export Lagarith Lossless.AVI of first 10 items will work for you.

  We will be watching for further developments.

  Thank you.

  RTA

• Change Presets in first Elements 4 will not allow the change of frame

  Hello:

  I followed the instructions for help to create a new preset.  Currently, the NTSC preset allows only 720 X 480 Hz Standard.  I clicked on the "New Preset" button and it will allow me to change the eligible areas, but it does NOT change the size of the image.  I tried to create a size of 320 X 240.  I also need to create an image size of 640 X 480 for a Flip Video camera.

  Anyone know how to change the size of the image on a new preset in first Elements 4?

  Thank you

  Rich Locus

  Logicwurks, LLC

  Are talking you about creating a project preset or a predefined action? And, if the latter, what category of shares, you are to create?

  It is not available to create a custom frame size preset, however, in the Premiere Elements.

• y700 - good custom presets for Audio advanced Dolby?

  Dolby advanced audio software. someone at - he of the good custom presets? I looked everywhere for some

  Mod edit: additional information added to the subject for the clarity of the question line.

  Honestly, I find the precise dynamic preset. I've tweaked just a little, and the only way I can share is via Twitter:

  https://Twitter.com/XBrav/status/732001243980136448

• Export from Photoshop Elements 6 for first Elements 8

  I have prepared a slideshow with the Organizer in Photoshop Elements 6 and produced a DVD that has a good image quality but not excellent (I chose File - high setting of 800 x 600). In order to improve the image quality of DVD, I installed the trial version of first Elements 8. I've exported the first Elements 8 show and have several problems.

  1 the picture quality of the DVD produced by first Elements 8 is worse than that produced from the Organizer (Photoshop Elements 6).

  2 titles, transitions and the Bo does not show in first Elements 8.

  3 the sequence of slides in first Elements 8 is different then the slide show in the Organizer (Photoshop Elements 6).

  At the same time a menu pops up asking me if I wanted to convert the catalog to the V6. I refused because I was afraid that the catalogue of the V6 can be replaced, and I wouldn't be able to come back.

  Help, please.

  CarlosWA

  CarlosWA

  Conclusion.

  My results are in agreement with your problems are NOT associated with Photoshop Elements 6 slide show used instead a Photoshop element 8 slideshow in the slideshow transfer to first Elements 8.

  To the test. Photoshop elements 6/first Elements 8.

  First, I created a slide show in the Photoshop elements 6 Slide Show Editor. It consisted of:

  (a) 19 jpeg photos each with dimensions of 3264 x 2448 pixels (which is not recommended to pixel dimensions but which has been used to highlight the project if possible... these photos are grossly oversized since the goal is a DVD VIDEO with standard 720 x 480 image size).

  (b) I used a transition wipe between each

  (c) I used the text inside photos (included in the text was a sequence number so that I could more easily visually follow the sequence of slide show after he was transferred to first Elements 8)

  (d) I added two audio clips as soundtrack (the first one I placed the start just before the last two photos to return on any audio synchronized as well as the loss of a full audio clip)

  (e) I used a pan and zoom for photos 1 and 2 effect.

  The quality of the preview in the editor of Photoshop elements 6 Slide Show was good.

  I issued the editor of Photoshop elements 6 Slide Show slide show, using the slide show option change out 'send to Premiere Elements '. When I did, first Elements 8 open, I put the project preset, and he accepted the slideshow. In the area of media project were

  a folder that contains all the individual components of the slide show

  (b) slide show (Group) video file

  The Visual form (grouped) was automatically placed on the Timeline as well.

  Everything transferred correctly. No problems. SEE IMPORTANT NOTE below.

  I burned even the content of the standard calendar DVD VIDEO of first Elements 8, and the standard DVD VIDEO read on my 19 LCD Widescreen TV.

  To the test. Photoshop elements 8/first Elements 8.

  I repeated the above with Photoshop Elements 8/Premiere Elements 8 and the same show and got the same results.

  IMPORTANT. Be it Photoshop Elements 6/first Elements 8 or Photoshop Elements 8/first Elements 8, I had to return the timeline in the Mode change in order to get the best possible overview so that I could determine or confirm what was on the chronology of the elements of the first. And, making chronology as described with all these pictures oversized took several hours.

  That's what I need to know:

  1 how many photos have you used in the slide show in the Photoshop Elements 6 or 8 slide show, and what were their dimensions in pixels? If you do not know, you can check in the dialog box elements Photoshop Editor, Image, picture, Resize the Menu size or just place your path of the mouse on the file on the hard drive and note the 'dimensions '.

  2. If you transfer your slideshow of Photoshop Elements 6 or 8 for first 8 Elements, use the option 'Send to Premiere Elements' Output and get your slide show on the chronology of 8 items first, you make this timeline by pressing the Enter key on the main computer keyboard so that the red line on the timeline goes green when the process is complete?

  3. your computer optimized, defragmented, cleaned, scratch your files to an external hard drive (NTFS formatted), etc. If you use an external hard drive for scratch files, is there enough space for them?

  4. What is your operating system and what are its resources, for example, the RAM available and free hard drive space. Have you checked your virtual computer memory implemented?

  Stay course on it to rule in or out the wmv not above approach to get your slideshow as a VIDEO DVD. But if you decide to make a detour to save the movie as file .wmv and you deal with oversized photos and a faulty component in the slide show, the writing of the .wmv becomes a possible focus point to find errors. And, if the .wmv is intended for DVD-VIDEO, and then use the (also known under the name of profile) file size = DVD NTSC (720 x 480).

  I suspect that the heart of the problem is going to

  (a) the use of oversized photos

  offending component b in a slideshow
  (c) the size of the slide show

  (d) computer resources

  (e) a combination of all or part of the above

  I will continue to monitor your progress.

  RTA

• Export of custom to another logic/computer icons

  I would like to export my custom icons LPX to an iMac, in a city far from my Studio, where I teach a course on Logic Pro X. could I do?

  Hello

  Go to the order of icons in the header of the track, click the control on one and choose 'show in Finder '.

  Copy the icons in the Finder.

  TDC

• export of custom code C data type

  Hello

  I wonder, in TestStand, is there a way I can export a customized data type to the type C struct definition?

  I use TestStand 4.2

  Thank you.

  Peggy

  You will need to make a series of API calls, I think.

  I suppose that you have an active container with passing C struct type, otherwise you will have no subproperties in C data types match. Then the following API functions should help you:

  • GetNumSubProperties gives you the subproperties number in the type of container. Then you can make a loop on them. For each
    • GetNthSubPropertyName to get the name of the Member in the type of container.
    • GetStructMemberType gives you the type C, a subproperty maps to.
    • GetStructMemberStringBufferSize, GetStructMemberStorage and GetStructMemberArrayStorage tell you, how structs and arrays are stored in the container (inline, pointers...)
  • GetStructPacking gives you the padding byte used to pass the struct. For Visual C++, for example, this can be translated into a #pragma pack surrounding the type.

  I think you need to use standard Win32 file operations to actually write the information in a header file, as the built-in functions of WriteFile of TestStand write AFAIK TestStand file formats.

  Maybe someone knows an easier way. Hope that helps, anyway.

  Concerning

  Peter

• Export video in stop motion crashes to first pro

  Hello

  I usually use Premiere Pro to edit film, but were invited to create a film in stop motion using a series of JPEG files. I created the film and now wishes to export but whenever I do the Premiere Pro crashes (Premiere Pro has stopped working and must be closed etc etc.)

  I tried to clean the database cache, but that had no effect.

  Thanks in advance.

  How you export your video? You directly through first or the Adobe Media Encoder queue? What format and parameters you export with? In addition, you have your JPEGs imported as a sequence of images or they are individually visible in your timeline?

• I get it during the installation of the first elements 13 ' the product you want to install is not a genuine Adobe software and appears to be counterfeit. Please report or contact customer support for assistance'

  I get this message when installing an upgrade of the first elements 13 ' the product you want to install is not a genuine Adobe software and appears to be counterfeit. Please report or contact customer support for assistance'

  Warning: "Adobe software real failure of Validation...". » | Windows