Change Presets in first Elements 4 will not allow the change of frame

Similar Questions

• First Elements 9 will not load the workspace

  Hi all

  I had pre 9 on this computer for some time and have just had a problem in the last month or two.

  • Home screen according to the normal and allows new project or open a project to be selected.
  • Once one of them is selected the workspace opens but is empty without the chronology or the preview selector.
  • the bar menu is at the top of the workspace, but only some of the choices in the drop-down list can be clicked, Eastern are grayed out.
  • those who can be clicked is the standard file menu and workspace menu and catering help.
  • disable the button cannot be selected, nor can register or update. I am running the latest version.
  • I have the last quictime and all drivers are up to date.
  • I am running windows 7 64 bit
  • as stated above, this program has run on this machine before, I have 4 GB of Ram and plenty of space (free 1.5 TB) hard drive

  Thank you

  YNT-08

  You run the program for the 9.0.1 update?

  Assuming that Yes, let us try to rinse the preferences

  In Windows 7 64 bit

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  First Elements

  9.0

  and in the folder 9.0 is the Adobe Premiere elements Prefs file that you delete. If it does not, then delete the 9.0 whole folder in which Adobe first Prefs files exists.

  Have the Folder Options Show hidden files, folders and drivers active so that you can see the described path.

  First Elements 9 didn't as a pre-installed on your computer? You have an installation disc or the installation for this product files?

  Please let us know the results.

  Thank you.

  RTA

• Adobe first Elements 13 do not interpret the film and properties correctly for widescreen is a mod.

  Adobe first Elements 13 do not interpret the film and properties correctly for widescreen is a mod. This has been brought to the attention of Adobe in December of 2014 by others. If you import a footage in Adobe Premiere elements 11 or 12, you can eliminate the black bars on the sides by setting predefined settings correctly and using properties and interpreting the film. Not the same with 13 elements. What has been done to correct the problem? How users can be compensated for the purchase of a program or upgrade to a program that has a fault serious?

  Please notify.

  fran3

  What you report a known problem with elements 13/13.1 first I wrote about back in December 2014, and whenever the subject came up in the Adobe Premiere elements Forum.

  First Elements ATR troubleshooting: EP: 13 serious problem with. MOD Widescreen files

  I have not seen Adobe personal or PRE_help this issue whenever it appears in one of the threads here. The frequency of appearance of personal Adobe or PRE_help is not defined. It's a call from Adobe on ignore or fix in the next version or other.

  This isn't Adobe. Instead a user. You need to contact Adobe to know the why of the situation and what his plans are to remedy the situation in order to allow the usual workaround if this is a solution that will make unnecessary workaround.

  You have a chance by converting the widescreen is a mod to another format that would recognize the flag of 16:9 wide screen of is a mod, if 16:9 is really there.

  RTA

  Add on... Consider

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• Whenever I try to download it says that there is a virus attached and will not allow the download to continue.

  Whenever I try to download it says that there is a virus attached and will not allow the download to continue.  It only gives me options other than come on the Microsoft site.  Help!  How can I fix this problem without having to lose all the information stored on my computer?

  Original title: download questions

  Whenever I try to download it says that there is a virus attached and will not allow the download to continue.  It only gives me options other than come on the Microsoft site.  Help!  How can I fix this problem without having to lose all the information stored on my computer?

  Hello

  It would seem that you are infected with malware.

  Read the answer in the link by The ball

  http://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/i-get-error-message-xxxxxxxx-contains-a-virus-and/fbb5e0fd-63bd-4E01-9a98-6074d33a8fd6

  Your PC is probably infected with the new variant of Sirefef AKA Zero access. The authors scheduled to turn several times a day to help him avoid detection by anti-malware programs.

  See http://www.microsoft.com/security/portal/threat/encyclopedia/entry.aspx?Name=Win32%2FSirefef

  Suggest you use HitmanPro Kickstart, which should remove this malware and fix changes made to the computer by the malware: http://www.surfright.nl/en/kickstart , you must use an uninfected computer to download it to a flash drive and then follow the specific directions on how to run the program on the infected computer.  Hitman Pro Kickstart is available as a 30 day trial version.

  See http://dl.surfright.nl/Kickstart-FAQ.pdf and http://dl.surfright.nl/Kickstart-User-Manual.pdf

  Good luck...

  
   

  http://ask-Leo.com/why_did_i_get_infected_even_though_i_run_antimalware_software.html?awt_l=Bg3x_&awt_m=JrWyqK6R8ZdfbL

  See you soon.

• Will not allow the transfer of files without authorization. How do I get permission?

  2 laptops to home network.   Windows 7.    1 x 64-bit, 1 x 32-bit.

  I have set up accounts on both computers at home as an administrator.
  I just want to transfer files / photos between them.

  My account on both (admin) will not allow the transfer of files without authorization.

  How can I get permission? I have set up on the two passwords I tried to use, but not joy.
  I missed something obvious?  I thought that I could just drag and drop!
  HELP please.

  Ownership of a file or a folder,

  Right click on the file/folder, select properties and then click the Security tab.

  Click Advanced, and then click the owner tab.

  Click on edit and then do one of the following:

  To change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.

  To change the owner to a user or a group is listed in the change owner to box, click the new owner.

  To change the owner of all subcontainers and objects in the tree view, select the Replace owner of subcontainers and objects of the box.

  See also why I can't delete a file or folder?

  How to open a file if I get an access denied message?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

  What to know before applying permissions to a file or folder

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

• After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  Hello

  If you use Norton, which could interfere with the restoration of the system.

  Disable Norton while doing your system restore.

  See you soon.

• My computer will not allow the installation of the Adobe Air software, a message informs you that I must refer to the administrator. I am the only user on this machine

  My computer will not allow the installation of the Adobe Air software, a message informs you that I must refer to the administrator, I'm the only user on this computer.   Help please.

  Thank you, Nicholas Cooper.

  Here you go:

  1. Right click on the installer.
  2. Click on "Run as Administrator".

• Internet security Windows 7 will not allow the installation of Flash Player 17 update

  Internet security Windows 7 does not allow the installation of the update of Flash Player 17.  I tried the direct installation using the IE_AX update without success.

  The procedures described in the last link enabled the update of Flash Player be downloaded and installed.

  It is regrettable that Windows IE seen Adobe as being an unreliable Site and requires a temporary user disable the security settings for the update to proceed.

  Thank you for your help.

• I will not allow the font to change name

  A colleague gave me a document by using a font, I do not have: UniversLTStd * I universe... the real family

  Illustrator allow me to change the name of universe; He wants to keep this UniversLTStd *.

  I can type a couple another letter like A___ and this will change the font.

  How can I myself Illustrator to bend to my will and accept the universe change without scrolling down the menu type?

  Thank you!

  w

  Put an instance of the font you want to use in the document, then:

  

  But instead of Rockwell and myriad, it looks like universeB universeA

  

• First Pro CC will not recognize the second monitor

  Greetings:

  I'm having a problem with the help of my second monitor to the output in CC PP.  I did the following based on another post:

  Try these two steps to check the transmission is enabled:

  1. go in the program monitor Panel menu > check "Allow to pass" is checked.

  2. go to Preferences > reading > check your 2nd monitor is present and active.

  What I get when I do it is a black screen that covers the top left of my screen at 1920 x 1080, the size of my other monitor.  When I save a project and use my second monitor for a sign, say under my belt, I'm able to drag the Panel above and use it, but when I save and reboot, the Panel is always on my primary monitor:

  Model name: iMac

  Model identifier: iMac13, 2

  Processor name: Intel Core i5

  Processor speed: 3.2 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 32 GB

  Boot ROM version: IM131.010A.B05

  Version of the SCM (System): 2.11f14

  NVIDIA GeForce GTX 675MX:

  Chipset model: NVIDIA GeForce GTX 675MX

  Type: GPU

  Bus: PCIe

  The PCIe track width: x 16

  VRAM (Total): 1024 MB

  Provider: NVIDIA (0x10de)

  Device ID: 0x11a2

  Revision ID: 0x00a2

  ROM revision: 3707

  Exhibition:

  iMac:

  Display type: LCD

  Resolution: 2560 x 1440

  Per pixel: 32-bit color (ARGB8888)

  Main screen: Yes

  Mirror: Off

  Online: Yes

  Integrated: Yes

  VP2365WB:

  Resolution: 1920 x 1080 @ 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: RDC104500162

  Mirror: Off

  Online: Yes

  Rotation: support

  I tried different confgurations in Preferences-> reading, but get the same result every time.  I have to force quit when I get the black box, I'm unable to access other options of PP.  Anyone encountered this, and if so, is there a solution?  I saw that there was a problem of "transmit", but that does not solve this problem.  Thank you!

  I don't hate replying to my own post, but I thought I'd post here how I solved my problem in case someone else ends up here with a similar one.

  To be clear, I have 2 monitors and when I activated transmit full playback screen would be superimposed on my workspace creation on monitor 1 even though I had specified to monitor 2 in my video device in the preferences > reading.

  It seems that during the last few months (I have a vague memory of it), I decided to check the "improvements" in the way Mavericks managed multiple monitors. I created two spaces in Mission Control, this is how Applications in the dock wins a menu extended options in the menu contextual (the one that appears when your right click the application icon in the dock). I knew that this extended menu was there because the site of Apple told me.

  From the OPTIONS menu on my 2 monitor setup are then ASSIGN to > all workstations; OFFICE ON DISPLAY 1; OFFICE ON DISPLAY 2; NONE.

  After trying the various options to see if the operation was consistent with the explanation of Apple and if I wanted to work with spaces, I decided that I don't have not so I removed the spaces that I created in Mission Control.

  Remove the deleted spaces these additional options ASSIGN to THE menu even though I wasn't aware of this at the time.

  A few days later, I went to allow the TRANSMISSION when editing in Premiere Pro (that I had used successfully before) than having the problem described in this thread. I stupidly credited this problem for a recent update of CC and in the release of 2014 CC does not correct it, I started to look elsewhere.

  Cut to the end and the way - after proving that a new Mac user account test does not show the problem, I have returned to my user account, active areas in control from Misson, changed the menu ATTRIBUTE to None for Premiere Pro (default), then the TRANSMISSION function worked correctly, showing a full picture has been assigned to the correct window.

  OK, the last paragraph may suggest I knew what to do but I have not, I had spent a lot to research in the library of the user to search for differences, until I came across this.

• First elements 4 will accept all the MPG files

  I'm trying to re - edit some old DVD files in 4 first.

  It seemed to me that the only way to achieve this would be to convert the VOBs created originally with first Elements of MGPE2 files extension .mpg and then re - import. There may be a way easier than what would be better.

  However, in my method of some files, it first only converts 14 minutes of the video file and is important the minutes of rest (about 20) in black.

  This has happened on several files.

  I know that the video is there because I can play .mpg on many actors including Ms. It would seem that the first renouncing sometime.

  Can someone give me some advice please.

  This is in version 4, I think. It can be called DVD and HDD Camcorder. Something like that.

  However, as John says, you can also convert the VOBs. But if you do, you must convert to DV - AVI using a program like MPEG Streamclip, use the settings listed in our FAQ to the right of this forum.

  http://forums.Adobe.com/thread/415317?TSTART=0

• The printer will not allow the default printer

  Adobe will not print file, said printer must be installed
  .  OfficeJet 6500 removed and reinstalled.  When installing the message says "cannot set as default printer".  Fix Microsoft, he says that he cannot solve the problem. Help, please.    Problem is recent.

  Hi Jerry93306,

  1. did you of recent changes on the computer?

  2. When you receive the error message?

  3. are you able to print using applications such as WordPad or Notepad Windows?

  4. what Microsoft fixit tool you have installed on the computer?

  See the link below and try the steps mentioned, if you get the error message when you print from Adobe applications.

  Error "you must install a printer.

  http://kb2.Adobe.com/CPS/409/kb409119.html

• How can I find someone to speak about payroll already for my product but it will not allow the download

  I paid and it was accepted by Adobe for Photoshop elements 14 download a trial of the same product, but it does allow me to download... it says serial number is not for Photoshop elements 14 but I have the order number and billing information, more it cost me $99,99 and if I would have looked online it's cheaper...

  Try to download links kglad in answer #1 here https://forums.adobe.com/thread/2081216

• Strange icon that will not allow the update to Adobe Flash Player 17 for mac

  When I download the most recent Adobe Flash update for mac I have a strange icon.

  

  When I double click to launch the update file, I get an even weirder window full of gibberish.

  If anyone has any ideas or suggestions, I'm open. I went through each help file I can find for Adobe and nothing has helped so far.

  Hi Threigia,

  Remove the .mdlp of file name, so that it ends just .dmg.

  We are seeing this behavior with users who have installed of MathLab and we look at why this is happening.  FWIW, this happens to other software THAT DMG files as well, not only the installer of Flash Player.  For some reason when users have installed, MathLab when the DMG file is downloaded, it adds the extension .mdlp for her.  When users try to run it, rather than open with DiskImageMounter, which is what OS X uses to open DMG files, it opens using MATLAB and the result is what you posted.  In this case in the future, simply remove ".mdlp" from the file name and DiskImageMounter will open the DMG, instead of Matlab.

  --

  Maria

• TB 31.0 when you reply or forward, will not allow the names in TO:

  With the help of TB 31.0. When I hit the reply, no name is inserted in the TO: and does not have a name to register. When you use before, does not allow a name to be included in the TO:

  Problem started after the installation of 31.0 TB.

  Start in safe mode (hold SHIFT (Mac: Option) when you start TB) and see if the problem persists. You have the add-on Photo touch?