Export rough

Similar Questions

• Images exported rough

  I tried to export images, but it is rough. For the first 3-4 seconds its fine, then the sound is good, but the video sort of freezes.  On computer/images/export still frame rate? The other possibilities that can cause this?

  Said Dave - MOV and AVI are container formats, only the CoDec within the material. You may have a second 1 clip choking your system - if it's uncompressed 4 k res or has 7.1 uncompressed audio attached, so including service say nothing really on the way he plays. all that matters is the effective data rate and how your system handles it - it will be always high for anything that is uncompressed, but more compressed formats will play on most computers powerful enough. of course, compression may mean that you sacrifice quality, but it's a complex subject a and expect no easy answers. Do a more general search on the web and you find out about all the technobabble...

  Mylenium

• Export-rough on only a specific part of the video

  I exported the video of this project before, to H.264 1080 p 24 frames per second and it worked perfectly fine. I used the same exact settings to export this section small 1 minute, and with the video from the same source as before, still now export is jerky as hell. What could possibly happen?

  You can create a new sequence and drag the images of the old in the new.

  You can also make a new project and import old project in this new.

  See if this will help.

• Moving files from first elements 8 PC for Premiere pro CS5 for Mac

  Hi, I am a new user of Creative Suite CS5 Production Premium on a Mac and I'm trying to open some of my unfinished projects of video from my old computer with Premier Pro. My old computer is a PC and I had been editing HD with first Elements 8 images, but I now have an equipped MacBook Pro which is much more suitable to what I was trying to do on my old computer, and I'd rather finish my projects on my new mac rather than on my old computer.

  I exported my workspace for the videos and the file of the elements, I was working on in folders and them moves on my Mac's hard drive. I read that first Pro CS5 automatically converts files of items when they are open, however, I get an error message about how they are files of a PC version of the elements and cannot be opened. My question is, is it possible to convert PC files first elements 8 into something that can be opened on the first Pro CS5 for Mac?

  PrE is only available for the PC. Unfortunately, there is no compatibility between PC GER (PREL) and PrPro on a Mac project files.

  It was the same with files in project PrPro 1.0, 1.5 and 2.0, because they were PC only and there is no Mac version, up to CS3. The only solution was that could get a friend on a PC with the CS3 version to open/import the PrPro 1.0-2.0 projects inside, let it convert and then make a Save_As. That the resultant project COULD be opened/imported in CS3 Mac. Compatibility is with PrE8 and CS5 - PC.

  Your choice is:

  1.) export rough-edited pre on your old PC files and then import those as assets, to finish editing

  2.) find a friend with CS5 - PC, import/open these project files PrE who, not a Save_As and then move the files to your Mac project

  3.) finishing editing on the PC

  Sorry for the bad news, but good luck.

  Hunt

• Need help exporting transparent gifs to flash - rough edges

  Hello

  I have a flash header that I'm building for a Web site. The layers I export for the web have a rough white edge (gif.s - save for web). Basically I'm transmitting to the flower of another color group, save a layer in Photoshop.

  A path would help? The image in the library is configured to allow smoothing.

  Here is a link to a screen shot in a new window.

  http://www.kineticcreativeco.com/forums/index.html

  GIF a no' soft 'transparent if I understand; are the psd or png-24 can be used for you?

• Illustrator export to PSD causing of custom brushes to look "rough".

  Hello

  I've recently updated to version 2015.3 of Illustrator and now when I export my files .ai to one. Lines PSD with a custom brush applied pattern look jerky.

  I reinstalled the old version and one is doing the same thing. I enclose some images to illustrate (large images to view details).

  Any ideas or help would be greatly appreciated

  Screenshot of Illustrator

  

  Screenshot of the file exported before update of 2015.3

  

  Screenshot of the file exported after update 2015.3

  

  Screenshot of brush model parameters (these have not changed and I have been using these since Illustrator CS 4)

  

  I exported CMYK and maximum editability.

  You don't need "regular" and the artistic forms. You can do this with only artistic shapes.

  

• Export of pictures not of the same size as file Photos

  Try to export files to then import into Photoshop elements 15. I exported "original not modified", but the file size is about 50 GB when my photo file is about 80 GB. What did I miss? Thank you

  Your photo library is larger than the handset sizes original in your library pictures because pictures take the edited versions previews and thumbnails as well. There are also masks for brushed settings or thumbnails of scanned faces.

  To see if you got all the original ctrl - click on your photo library, use "Show Package Contents", look at the size of the folder "masters".  It is roughly the size of the folder with the exported originals?

• Export of IMovie

  How long does take to export an iMovie for 50 minutes on the desktop project? I have chosen the quality and size is 10 GB.  Currently, the status reads at 25 hours.  2 hours ago, he read 22 hours.

  The film is composed of video clips, text and 2 songs.

  My specs are:

  MacBook Pro (13-inch, mid-2012)

  OS X Version of Yosemite 10.10.5

  Processor: 2.5 GHz 1600 MHz DDR 3

  Storage: 105,78 free GB of 498,88 GB

  Boot disk: Macintosh HD

  Graphics card: Intel HD Graphics 4000 1024 MB

  25 hours seems a little slow, but you have a rather slow mac with Intel graphics card and that you have chosen high quality.  The time required is only a very rough estimate and may change upwards or downwards as and export.  You've probably seen the post from SuperMario1985 that uses Mac much faster, especially in the graphics Department, which is important for rendering.  It is sometimes better to export it faster at least a quality first to verify that makes it all OK and to see if something needs correcting.  When you're happy with it and then go to high quality when you can leave it running and don't need the computer for other work to much CPU.

  Geoff.

• Remove the file name characters when exporting to file

  Hi all

  I worked with Silly-V , which has been extremely useful in creating a script to automate creating files in Illustrator.

  What I need help with now is the ability to add in this script, the ability to remove "x #" character of a filename on export. This would be ideal, as it will completely automate what I did by hand for months.

  The current script, that we have put in place takes generally, which would take me about 1 minute per file and it has reduced to 10 seconds. Translate this in the whole of the need to treat roughly 800-1 000 files, and you can see where the time invested is decreased significantly.

  The last piece of the puzzle is the removal of characters from ONE of the two files that are created through this script.

  First of all, this is the current script. It seems to work perfectly for what I ask it to do.

  #target illustrator-19  
  function test(){  
    
    
    var folder_1 = Folder("~/Desktop/Header CAD");  
    var folder_2 = Folder("~/Desktop/Clean CAD");  
      
    app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;  
      
    function revealAllLayers(doc) {    
        for (var i = doc.layers.length - 1; i >= 0; i--) {    
            doc.layers[i].visible = true;    
        }    
    };    
    
    
    
    
    function hideLayer(doc, name) {    
        doc.layers.getByName(name).visible = false;    
    };    
    
    
    
    
    function exportMyPng(dest, doc, props) {    
        if(props.hasOwnProperty("antiAliasing")){    
          switch(props.antiAliasing){    
            case "ARTOPTIMIZED" : {    
                app.preferences.setIntegerPreference("plugin/PNGFileFormat/AntiAlias", 1);    
                break;      
            }    
            default : {    
                break;    
            }    
          }    
        }    
        var pngOpts = new ImageCaptureOptions();   
        pngOpts.antiAliasing = true;   
        for (var all in props) {    
            if (pngOpts.hasOwnProperty(all) && all != "antiAliasing") {    
                pngOpts[all] = props[all];    
            }    
        }    
        doc.imageCapture(File(dest + "/" + doc.name.replace(/\.\w+$/, props.extraStuff + ".png")), doc.visibleBounds, pngOpts);    
    };    
    
    
    
    
    var doc = app.activeDocument;    
    revealAllLayers(doc);    
    hideLayer(doc, "Materials");    
    hideLayer(doc, "Detail Artwork");    
    exportMyPng(folder_1, doc, {    
        transparency: false,    
        antiAliasing: "ARTOPTIMIZED",    
        resolution: 300,    
        extraStuff: "_header"
    });    
    
    
  
  
      
    hideLayer(doc, "Header");    
    exportMyPng(folder_2, doc, {    
        transparency: false,    
        antiAliasing: "ARTOPTIMIZED",    
        resolution: 300,    
        extraStuff: ""
    });    
    
    
    app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);  
    
    
  };       
  test(); 
  
  test(); 
  

  I found the program Name Mangler done an exceptional job of the completion of the task of renaming. Here's a screenshot of what I'm asking for looks like with this program.

  

  My ultimate goal is to be able to integrate this unique Name Mangler feature the existing script I posted above. Now, the problem is that I need ONLY to assign the file created by the section of the lines 66-71. As you can see, I need to remove the file name starting at the index of 14 characters.

  Is it possible and something that anyone can help with?

  Thank you in advance!

  Brooks

  Whew busy days!

  Well, I got this here:

  #target illustrator
  function test(){   
  
    var folder_1 = Folder("~/Desktop/Header CAD");
    var folder_2 = Folder("~/Desktop/Clean CAD");   
  
    app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;   
  
    function revealAllLayers(doc) {
        for (var i = doc.layers.length - 1; i >= 0; i--) {
            doc.layers[i].visible = true;
        }
    };     
  
    function hideLayer(doc, name) {
        doc.layers.getByName(name).visible = false;
    };     
  
    function exportMyPng(dest, doc, props) {
        if(props.hasOwnProperty("antiAliasing")){
          switch(props.antiAliasing){
            case "ARTOPTIMIZED" : {
                app.preferences.setIntegerPreference("plugin/PNGFileFormat/AntiAlias", 1);
                break;
            }
            default : {
                break;
            }
          }
        }
        var pngOpts = new ImageCaptureOptions();
        pngOpts.antiAliasing = true;
        for (var all in props) {
            if (pngOpts.hasOwnProperty(all) && all != "antiAliasing") {
                pngOpts[all] = props[all];
            }
        }
        doc.imageCapture(File(dest + "/" + doc.name.replace(/\.\w+$/, props.extraStuff + ".png").substr(props.charsOffStart)), doc.visibleBounds, pngOpts);
    };     
  
    var doc = app.activeDocument;
    revealAllLayers(doc);
    hideLayer(doc, "Materials");
    hideLayer(doc, "Detail Artwork");
    exportMyPng(folder_1, doc, {
        transparency: false,
        antiAliasing: "ARTOPTIMIZED",
        resolution: 300,
        extraStuff: "_header",
        charsOffStart: 0
    });     
  
    hideLayer(doc, "Header");
    exportMyPng(folder_2, doc, {
        transparency: false,
        antiAliasing: "ARTOPTIMIZED",
        resolution: 300,
        extraStuff: "",
        charsOffStart: 14
    });
    app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);   
  
  };
  test();
  

  This one has a new parameter "charsOffStart" that you have to stick in your two-functions for the economy, and it will be lop however much from character now!

• Exporting proxies without restoring links to the source in CC 2015.3

  I currently testing the new version first and proxy for the workflow capabilities to my installation of posts.

  We hope to introduce custom proxy ingest parameters for the two descendants 4 + content and add a LUT to images.  Ingest functionality seems to work perfectly.  My question: is it possible to export the proxies with these LUTs baked in crude, cups etc., or is there no option NOT to be reprinted for the source of the layer to export footage.  We try to avoid using Lumetri for each item in the timeline (as we did).  However, if the images always rebuild the source, which is usually an advantage, we'll have the same transparent images that we would normally have no effect.

  When you create your Proxy ingest preset, start with a screening of coding to define your desired smaller image size and go to the effects tab and add your LUT desired, etc. Then, create a preset Ingest and set the Format and preset to your custom preset encoding.

  The proxies will always automatically create a link to the full resolution clip. When you use the button toggle Proxies (in Source and program monitors), it makes alternate the display of full resolution and Proxy. If Proxy clips were cooked in the effects, then it displays when you view Proxies, but not when you view full resolution (as Full-Res clips have no bakery in effects)

  If you wanted to export a rough cut of your Timeline using sequences of Proxy then you can select all the clips attached and make offline. This will make the Res full offline, but keep Proxy online. When you export, then will use clips of Proxy with your effects to the oven to (if full resolution are in line, then it will export automatically full resolution).

  Some info about Ingest and proxies:

  Work offline using proxy media | Adobe first Pro CC tutorials

  LIVE NOW! First Pro CC was last updated. Creative blog Cloud by Adobe

  Premiere Pro editing workflow base

  I hope this helps.

• Adobe first/Media Encoder CC Crash when exporting video for ~ 25 min (Mac)

  Specifications of the laptop:

  OS X Version of El Capitan 10.11.4

  2.5 GHz Intel Core i7 processor

  16 GB memory

  Iris Pro 1536 Intel graphics card

  Problem:

  Adobe Premiere and Media Encoder CC constantly crash when I try to export the sequence of a project which is roughly ~ 25 minutes in length, H.264.

  The effects are used throughout the project, but only the base dissolves and black-and-white/contrast effects. Images comes from several sources, but all of the same mp4 file and type frame rates. There are also several PNG files in the Assembly, including the one I used to "frame" the movie to make it look more like images from other sources. Yet once, nothing complicated, not even a long dissolve (dissolved all is literally 2/24 frames in length).

  Split the video into sections and exporting separately are no problem, even when comparing a relatively short section of 4 minutes for a much bigger and more focused on the effects of section 11 minutes. Needless to say, I really, really, really prefer does not export this video into sections. The intended destination is youtube, and I just want everything in an own mp4, not two 12-minute videos.

  After some digging, I found similar problems reported on these and others and was especially deplore the possibility that my power supply is not large enough to cope, but it's still very confused. My MacBook is not 'stop', and as far as I could see, the Iris Intel Pro should have been sufficient even without a graph 5100 graphics adapter Pro 5200 or; as in the past I've already exported MUCH larger files, ranging from 35 to 85 minutes.

  solved by downloading latest driver for Nvidia CUDA for Mac - really just a problem with the Mercury playback engine. Guess OpenCL was not simply cut to get the type of work I was doing.

  Here is a convenient link to the latest CUDA for Mac drivers for all who encounter similar problems with export in Adobe Premiere Pro Media Encoder CC or CC: drivers CUDA for MAC Archive | NVIDIA

• Makes me nuts. Adobe Premiere Pro CC - Mp4 fine but Choppy in playback and export.

  It's driving me crazy. I can't find anything about my situation.

  I transfer all my VHS tapes & tapes Hi8 using Blackmagic Media Express. They fired to the mp4 format, but the sound was a little out of sync so I went to fix this in Adobe Premiere Pro CC because I'm adding titles in any case. The original mp4 file works perfectly. But when I import it into Adobe CC he plays rough AND when I export, the new ground thus plays file. I tried using a converter that makes the works, but the video does not look more good. This is my first post so I apologize if I lack info.

  I have a...

  Mac Pro (end 2013)

  Processor 3.5 GHz 6-Core Intel Xeon E5

  32 GB 1866 MHz DDR3 ECC memory

  Start drive Macintosh HD

  Graphics AMD over-pants D700 6144 MB

  Any help at all will be greatly appreciated. Thank you!

  The problem is obvious, as the sequence frame rate and the output is 14.985 when be 29.97

  I wonder if the mp4 clips captured with the good rate, but first he misinterpreted?

  MediaInfo is a free downloadable software that shows all the technical features of the file source video. First, right-click on a clip in the tray, and then select Properties - what does say for pace?

  Try this - open a new project, import your mp4 clips captured. Right-click and select change > interpret footage and if the pace is not 29.97, change it to 29.97

  Now click with right button and select new sequence of the Clip. Add the clip to the timeline and play, how is it? Check sequence > sequence settings and make sure it is 29.97, and the output should be as well.

  If you have already done a lot of editing and of course don't want to start over, try this. Make a copy of your project. Create a new sequence DV NTSC. Do the thing of frame rate change on source clips in bin. I think that you may be able to select multiple and modify several at a time. Go to the original sequence with published clips and do CTRL + A to select all, then CTRL-C to copy, then go to the sequence of NTSC DV you did and paste with Ctrl + V.

  If all goes well, he takes the work you have already done and make a beautiful sequence of 29.97, you can then export to 29.97 and everything is fine!

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Adobe CS5 exported damaged avi animations

  Hey there, I am having trouble with a file of my not export properly and I'm absolutely desperate at this point.

  I just finished an animation ~ 3 min yesterday but when I exported to a .avi file, it is corrupt. (Frames overlap, are cut in half, the colors are completely reversed, animation starting in the middle and then jumps back to play at the long, rough static) I made an animation of the year last in August 2015, using the same computer, the version of Flash, methods and it worked well and always has, so I don't know what the problem with this animation. I really do not understand what's going wrong at the moment, or where the file may be corrupted.

  The animation is 24 frames per second.

  I tried to save as a .avi and .mov, and giving thanks to After Effects with no luck. (In fact, in After Effects, the audio has not made correctly/all the way through, or not at all.)

  I tried piecing back together animation in a new file in Flash to isolate where the problem is maybe, but the same product no matter what layer it is (I tried each of them individually, and the same thing happens when rendered/exported).

  Flush to the main issue at the beginning of the animation leads to Windows Media Player not being able to open the file at all.

  Again, I am desperate. I spent weeks working on this animation and it will not export in Adobe Flash Professional CS5, CS6, CS6 or copy from a friend of the file (in which case it was my computer that gives issues). I would really not scrap work weeks, especially because it looks and works fine in Flash, but now that I need to download it, it can not work. Please, I would be grateful any help whatsoever.

  HA! I can easily make 768 x 480, I couldn't just not believe that anyone would need this particular size!

  I ' l do both. I'll post the files to 10 Mbps H.264 with AAC audio, 320 kbps. This should be plenty for recompress you to other amounts.

  Soon to return...

• Is it possible to image export batch have the same area?

  Hi all

  I would like to batch export a set of images that are a mixture of landscape, portrait and everything in between.

  I wish that the exported images to be roughly the same size (meaning, roughly the same area).

  Is there a way to do this?

  I guess export by "Megapixel" is the way to go - but then my problem is that seems to require at least 1 megapixel to the exit and I need them smaller.

  Any suggestions?

  I guess I could export in megapixels, then import them those, and then export again by percentage - but which means additional steps and probably also lower the final IQ.

  Thanks in advance for your suggestions!  -Scott

  As you already say it correctly. Limit for megapixels is exactly the way to go if you want the images to the whole region even regardless of proportions. Unfortunately, there is no way that I know off which allows you too put a number less than 1 megapixel here. You could try to edit a saved export preset in an external editor. Where are stored the people depend on your operating system and if you save presets along your catalog file. I just tried and you can fool Lightroom by accepting smaller than 1 million pixels that way and it seems to work fine. It apparently only checks the number when enter you the interface.

• Several groups in PDF export

  I posted a similar question in the past and it has been sorted (ending with export groups but in JPG format). However, I would like to export them to PDF, now that I know it's possible and have a rough idea of how to do this through some members of this forum.

  Although I only got an extreme like the code below. It resizes the page but it looks like the right size - and the Group meets in pasteboard somewhere.

  Would be very happy if someone could remember where I've gone wrong!

  var doc=app.activeDocument;  
  var links=doc.links.everyItem().getElements();  
  var fd=new Folder(doc.fullName.parent+'/PDF');  
  if(!fd.exists){
    fd.create();
  }
  var f;  
  for (var i=0;i<links.length; i++){
    if ((links[i].status==LinkStatus.NORMAL||links[i].status==LinkStatus.LINK_EMBEDDED)&&  
    links[i].parent instanceof EPS &&
    links[i].parent.parent.parent instanceof Group){
  
  
      //create new document
      app.documents.add();
  
  
      //duplicate group to new document
      links[i].parent.parent.parent.duplicate(document.pages.item(0));
  
  
      //set bounds of page to bounds of group
      var pg = app.activeDocument.pages.item(0);
      var gBounds = links[i].parent.parent.parent.geometricBounds;
      pg.reframe(CoordinateSpaces.INNER_COORDINATES, [[gBounds[1], gBounds[0]], [gBounds[3], gBounds[2]]]);
  
  
      //export as PDF
      f=File(fd.fullName+'/'+links[i].name.replace(/.[^.]+$/,'')+'.pdf');  
      app.activeDocument.exportFile(ExportFormat.pdfType, f)
  
  
      //exit without saving
      app.activeDocument.close(SaveOptions.NO);
  
  
    }
  }
  

  Adam

  Adam,

  It seems simpler to create the new document to the appropriate size so that no resizing is required. Something like this:

  group = links[i].parent.parent.parent;
  gb = group.geometricBounds;
  app.documents.add ({documentPreferences: {pageWidth: gb[3]-gb[1], pageHeight:gb[2]-gb[0]}});
  duped = group.duplicate(app.documents[0].pages.item(0));
  duped.move([0,0]);
  

  P.