Export rules & schedules

Similar Questions

• export rules

  Is it possible to export off the coast of the IPS rules so that the export rules?  I use a 4240 IPS 6.x and via the GUI, I am able to export a "Summary" of rules, but not the rules themselves.

  Is it possible to do this through the CLI or GUI?

  I would like to know if this is confusing

  Thank you

  Evan

  No, your 'rules' are placed in configurations, signatures of cisco are downloaded in a format compiled and installed on the hard drive as files and compiled sensors in the signatures database. I don't think that you can see more details on a signature in the cli, you can in the GUI, but I could be wrong

• How to export rules in TMG 2010

  Hello

  We have Forefront TMG 2010 (Version 7.0.9193.585).
  Could someone help pls to export all rules in the TMG Server
  Is it also possible to export the entire policy and firewall configs in a xml/xls file.

  Concerning
  Ajit

  Try asking int eh Forefront forums:

  http://TechNet.Microsoft.com/en-us/forefront/ff404202.aspx

• Export rules Foglight

  Hello

  Does anyone know if it is possible to export the rules to a new instance of an instance of Foglight?  We set up a separate foglight for non-produits env and I want to move our customs regulations export and import if possible rather than recreating each of them.

  Thank you

  Chris

  The easiest way is to use the cartridge Foglight IDE everything bundle up and install that cartridge on the new host.  It can be used for rules, metrics, dashboards etc...  http://fglide.apmcentral.org/

• Rules on import export

  Hello world.

  I need to solve a problem: Automating import and export bussiness rules and forms in the calculation Manager.

  I found the decision for forms. It's FormDefUtil.cmd

  
  

  Is there something like FormDefUtil, but for the Rules of Bussiness?
  

  Utility that allows to export rules to import command line

  PS EMP version 11.1.2.3

  Thank you

  Best regards!

  To export of LCM SSP sample by selecting business rules and save it in the location (only xml generated sample.xml) C:\Oracle\Middleware\user_projects\epmsystem1\bin

  Then go to the command line Navigate to this folder C:\Oracle\Middleware\user_projects\epmsystem1\bin

  C:\Oracle\Middleware\user_projects\epmsystem1\bin>utility.bat file sample.xml (above the xml file generated)

  First time when you do and then he will ask for username and passowrd and it will store the same.

  Thank you

  ~ KKT ~.

• Where is the Menu 'depth' in the export settings

  Hello

  I want to export a scheduled part of my first Adobe (CS5) to the media with a channel alpha (Windows AVI or Quicktime).   I see the below link which, in its final stage, said "in the video tab, choose PNG, None, or an Animation in the Video Codec menu and the menu depth, choose 32"

  http://blogs.Adobe.com/PremierePro/2010/07/exporting_video_with_an_alpha.html

  I have followed the steps, but cannot find a Menu 'depth '.

  Clues?

  
  Thank you

  
  Rowby

  AH Yes, Jim and Alan.

  I don't have enough scroll.  I now see the Menu depth.  And a bunch of other things!

  Thanks for the clarification that!

  Rowby

• HPDM 4.6 SP4 cannot save the files deploy subtask

  Recently, when you create a new task to deploy a file and try saving it I get:

  "Cannot save the subtask to deploy files.

  If I create another type of task it saves without problem. The only time where there is a problem, is if I am trying to add files to my task. If I try to add a file to an existing template, I get the unable to merge the error of the model.

  I have checked the permissions in the main repository, run the test, all come back fine. I even tried manually adding files to the repository and that's ok too. I can't find something as interesting in the newspaper. I should mention that we did a database migration recently, but I test all features and managed to save a task of deployment without problem.

  Try to get out of the individual tasks that contains files (in this case the msi Hotkey filter) I get the following:

  2015-07-03 14:08:21 [error code: 5260288] [Module: MasterController] [category: input/output disc] 2015-07-03 14:08:21 [error details]:.\SyncTask.cpp@91: failed to sync files. .\port_layer\ftpclient\fileclient.cpp@816: failed to get the data from the file. .\port_layer\file_io\filefuncs.cpp@86: failed to get the data from the file : D:\HPDM/Repository/Files/ToDeploy\Hotkey filtre.\port_layer\file_io\filefuncs.cpp@84: the system cannot find the specified file.

  In the masterrepository log:

  2015-07-03 15:14:28 ERROR could not remove the package: Test. \port_layer\ftpclient\fileclient.cpp@235: has no file stat, RemoteDir: / files/repository/ToDeploy, name: Test.
  .\port_layer\ftpclient\fileclient.cpp@390: could not get the file stat, RemoteFile:\\10.7.1.29\HPDM$/Repository/Files/ToDeploy.
  .\port_layer\ftpclient\ShareFolderClient.cpp@424: has no file stat data.
  .\port_layer\file_io\filefuncs.cpp@86: failed to get the data from the file : \\10.7.1.29\HPDM$/Repository/Files/ToDeploy\Test
  .\port_layer\file_io\filefuncs.cpp@84: the system cannot find the specified file.

  2015-07-06 09:11:44 CTaskReceiverThread::recvTask() of ERROR: unable to receive data from ssl server.
  2015-07-06 09:11:44 CTaskReceiverThread::recvTask ERROR failed. Returns the value-1.
  2015-07-06 09:12:10 sendReoprt() of ERROR: unable to send data to the server.
  2015-07-06 09:12:10 CReportSenderThread ERROR::recvTask(): could not receive data from ssl server.
  2015-07-06 09:12:10 ERROR CReportSenderThread::recvTask failed. return value = - 1

  10.7.1.29 refers to a repository of the child, I have about 30 repositories of the child.

  I have not changed any configuration, I don't really understand how this happened, I can't even create my first Contact rules, scheduled tasks or create new tasks/templates. We are in the midst of a large-scale deployment so that any help ASAP that would be most appreciated!

  Thank you

  Luke

  This has been resolved with the help of Chen_HPDM by e-mail.

  We changed the console.conf to:

  HPDM. NEWSPAPER. LEVEL = DEBUG

  (console.conf can be found in C:\ProgramData\Hewlett-Packard\HP device Manager\Console\conf)

  I ran the task to deploy the files again and had the following in the log:

  2015 07-09 09:43:41 [WT-EventQueue-0] DEBUG Console - Request (20201): add templates

  2015-07-09 09:43:42 [WT-EventQueue-0] DEBUG Console - [TimeSpan] (20201): Add models [true]: 86

  2015-07-09 09:43:42 [WT-EventQueue-0] TemplateManager DEBUG - processAddTemplate: OS = HPWE8_64, name = New Test, category = files and the registry, status = transfer and tip =

  2015 07-09 09:43:42 [WT-EventQueue-0] DEBUG Console - Request (20202): update of model

  2015-07-09 09:43:42 [WT-EventQueue-0] DEBUG Console - [TimeSpan] (20202): update model [true]: 142

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy\_Temp

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy\_Temp

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp

  2015-07-09 09:43:45 [Thread-43] DEBUG MPFactory - Call TemplateMP.

  2015-07-09 09:43:45 [Thread-49] DEBUG TemplateManager - processAddTemplate: OS = HPWE8_64, name = New Test, category = files and the registry, status = transfer and tip =

  2015-07-09 09:43:45 [Thread-49] TemplateManager DEBUG - processUpdateTemplate OS = HPWE8_64, name = New Test, category = files and the registry, status = failure, tip =

  The Console could not delete a temporary file created previously called HPDM_Temp. I renamed the file and was able to create the task.

  I can't wait to find my question on the forums, and someone didn't post the solution so I hope this helps and thanks again Chen!

  Luke

• Copy the settings of Notification E-mail off Foglight v5.5.8:

  Hello

  I am currently looking to upgrade my system Foglight V5.5.5 at V5.5.8: to take advantage of new alarms set up in overall Administration.  A step that would preserve the time for the upgrade is the ability to configure all the settings of the alarm on my Foglight Test Server and move the table to the Production.  I heard that there is a cartridge PSO there that can do it, but I was wondering if there is another way to achieve this.  Anyone sings it before?

  P

  You can export rules/registry variables once you're done set them up in your test environment. Please make sure that your test and production environment, both are compatible Foglight version. You can use the JMX Foglight console as well for rules/registry variables.

  Thank you

  AJ Aslam

• VPN problem taking in charge the VRF CSR

  Hello community,

  I am currently evaluating CSR at AWS (60 day trial) and already around the usual problems and specialty architecture network AWS design.

  I can't open a TAC case, because we purchased no license. We will, once this last problem is solved.

  Current configuration:

  • Two councillors in a VPC in two AZs
  • Transit between two advisers of the GRE tunnel
  • running supports the BGP VRF
  • using door VRF
  • the RSC is connected to several AWS VPC (customers) via the AWS VPN feature - route entirely mesh based VPN--a VRF customer - all running with BGP
  • Link to local is done in the same way: entirely mesh route based VPN - using door VRF - all running with BGP
  • VRF import/export rules

  It works fine - no problems here. All HA tests work as expected. So far, so good.

  Now, we had to create a VPN connection to a special local location of our society. We should create a policy based VPN location (no support for VPN road based there). It is a two-to-one VPN. Two advisors of the connection to a gateway onPrem. The two tunnels, run the same field of encryption. OnPrem routing is based on the State of the tunnel. We put this tunnel in the VRF door of entry. Routes are injected to the door VRF routing table by VPN process (reverse-way static in crypto map). To get these exported to consumer VRF routes, there is a network statement in door VRF BGP process.

  Well, this also works fine if we do this only with CSR A. Reachablity is out. CSR B the delivery of the CSR due to taking work supported the VRF VPN. However, if we establish the second CSR B tunnel, there is something strange happens.

  Tunnel is very well implemented. Traffic through the tunnel at CSR B is accepted and routed to the destination. Created at door VRF on CSR B traffic is routed in its own VPN very well. However, traffic from a VRF client who reached CSR B (traceroute proved that) is not routed through the VPN tunnel, despite the VPN client routing table is to say. CSR A running the same configuration, there is no problem. Only on the CSR B.

  I don't understand this. If remove us the configuration of the tunnel of CSR and create only tunnel on CSR B, it still does not. I don't understand why, because I did a comparison of config and found no difference.

  Someone at - it an idea, whats going on?

  How can I debug this problem?

  CSR - A:

  B 172.29.13.176/28 [20/0] via 1.1.119.182 (vrf - default), 3w4d

  CSR - B:

  with route (doesn't work is not for the customer VRF)
  B 172.29.13.176/28 [20/0] via 1.1.119.182 (vrf - default), 00:00:02

  No itinerary (work, because only sent by public transit to the CSR - A)
  B 172.29.13.176/28 [20/0] via 192.168.254.53 (vrf - default), 00:38:23

  This problem is hard to describe, I would really appriciate discuss with a TAC engineer in a WebEx. Is this possible?

  Thank you.

  Hello Tobias,.

  The problem you describe is going to be outside our CSR platform expertise. Looks like the CSR works well and HA works as well, and now you're trying to find a solution to a problem of network/VPN that you are facing.

  Our team is led to find an internal resource to resolve your issue, please allow us a day or two to get back to you with an answer

  Concerning

  Tony

• FDMEE - LCM problem

  Hi all

  We are having a problem exporting our rules of loading data FDMEE for our largest application in LCM.  When we click on export, it still fails (all other elements are able to export successfully).  The SharedServices_LCM.log file contains the following error message:

  Unable to connect to 'FDM Enterprise Edition' during application export. Received status code - with "500" error message - "Error 500 - Internal Server Error Error 500 - Internal Server Error of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1: 10.5.1 500 Internal Server Error the server encountered an unexpected condition which prevented him from meeting the demand.". " Does not cause possible error no server available for connection.

  We have the DLR 2 224 so I don't know if the size has nothing to do with it.  Export of our other small application of the DLR works very well.

  Any ideas?

  THX,

  Mike

  This problem is solved now.  Open a SR with Oracle ran newspaper and came across this line in the ERPIntegrator log:

  oracle.jbo.TooManyObjectsException: Houston-25013: too many objects correspond to the oracle.jbo.Key [4019 primary key 9]

  We went in the AIF_BALANCE_RULES table and saw 4019 was a number RULE_ID.  We have removed this rule and then tried to export rules in loading data via LCM again.  Then we had another error in the log:

  oracle.jbo.TooManyObjectsException: Houston-25013: too many objects correspond to the oracle.jbo.Key [4110 primary key 5]

  We have removed the table AIF_BALANCE_RULES, and then re-run LCM 4110 and magically it worked.  So it was clearly something on both of the DLR LCM disliked about the primary key.

  This problem is solved for us... for now.

  THX,

  Mike

• Using Primavera P6 project

  We want to serve you Primavera P6 project to enter dates of start/end of project Instantis phases in order to plan the resources via Instantis. What is the best way to do it? We thought the export of P6 in the MSP, then in Instantis? Best practices for a use like this case?

  Yes, here are the steps to make this work

  1. 1. print a copy of your Active calendar / roadmap for reference
  2. 2. in EnterpriseTrack, create a new project and include the team you want to use
  3. 3 export your schedule/roadmap for MSP
  4. 4. insert or remove columns from the MSP on the asset/roadmap calendar to match the format of the schedule/roadmap that you exported from the EnterpriseTrack.  You can do the same for the actual and planned Effort.
  5. 5. in your schedule/roadmap active, add a text column and copy the resource assignments in the text column (add the same column of text to your schedule/roadmap exported EnterpriseTrack)
  6. 6 remove all resources in your Active calendar / road map by going to the table of resources and removing resources
  7. 7. highlight the lines of Active schedule / roadmap and copy them into the schedule/roadmap from the second line (this will keep the beginning of the project at the same time)
  8. 8. change the two line so it has the same start date as the start date of the project and make sure that it is at the same level as line 1.
  9. 9. Remove line 1
  10. 10. your resource assignments. (Refer to the printing or the text column)
  11. 11. Save and import the project schedule/roadmap to EnterpriseTrack

• DRS-Backup Script

  Hi all

  I have a script to back up all the DRS Rules in current vCenter and import into the new vCenter for migration, but has a few virtual machines to host rules "run VMs on host" type. So, I found that there is a way around to create such a rule by creating groups of MV and host groups, and then the rule. But I can not find how to get the already existing groups in old vCenter and import it into the new vCenter. That's what I use to import and export rules of the VMAffinityType-

  Export-

  If (Test-Path-Path $outfile) {}

  Remove-Item $outfile

  }

  Get-data center | %{

  $dcName = $_. Name

  $_ | Get-Cluster | %{

  $clusterName = $_. Name

  $rules = $_. Get-DrsRule

  {if ($Rules)}

  {foreach ($rule in $rules)

  $line = $dcName + ', ' + $clusterName

  $line += ("," + $rule.) Name + ', ' + $rule. Permit + ', ' + $rule. KeepTogether)

  foreach ($vmId in $rule. VMIds) {}

  $line += ("," + (get-View-Id $vmId).) Name)

  }

  $line | Out-file - add $outfile

  }

  }

  }

  }

  
  

  Import-

  $rules = get-Content $outfile

  {foreach ($rule in $rules)

  $ruleArr = $rule. Split(",")

  If ($ruleArr [3] - eq "True") {$rEnabled = $true} else {$rEnabled = $false}

  If ($ruleArr [4] - eq "True") {$rTogether = $true} else {$rTogether = $false}

  Get-data center $ruleArr [0] | Get-Cluster $ruleArr [1] | `

  New-DrsRule-name $ruleArr [2] - permit $rEnabled - KeepTogether $rTogether - VM (VM-Get-name ($ruleArr [5..)) (()_$ruleArr.Count_-_1)]))

  }

  Here are the scripts of LUCD!

  Can someone suggest a good way to integrate what I'm looking for these?

  Fixing of the screens showing my current rules

  Thank you

  Have you ever seen need a script to export & import of DRS rules. ?

  In this thread, the rules (including groups) are exported with the vNugglets script, and I've provided a modified version of the functions of Arnim to read the return policy. At the end of the script attached to this post is my script to read information from the CSV file.

  Who do you want?

• Concern of Calc Manager

  Hello

  
  

  
  

  In the version of calc Manager - 11.1.2.3, when I copy a business rule between applications in calc Manager comments in

  
  

  the code disappears.

  
  

  
  

  Any idea what could be? Or is some sort of bug?

  
  

  Thank you

  EbrauerP

  1. go to Shared Services in the original application. Take the Group of application corresponding to your request. Then, open the Types/Calc Plan Manager rules. Right click on the rule that you want to export, and then save the file. The exported rule should produce an XML file.

  2 return to Calc Manager and access the application target/rules and then to the right, click Import. Select the previously exported file.

  3. after importation, deploy the rule.

• Security for a particular application migration

  Hello
  
  I use CSSImportExport to export security. I need to export security for a particular application. the content of my exportnative.properties file is
  
  Export.Internal.Identities = true
  Export.native.User.passwords = true
  Export.Provisioning.All = True
  Export.Delegated.lists = false
  Export.User.Filter=*@Native directory
  Export.Group.Filter = DC_ *.
  Export.ProductType = HP - 11.1.1.3
  Export.projectnames = schedule
  Export.applicationnames = Plan_UAT
  
  But it exports the security of applications and products. What's not here?
  
  Kind regards
  Brig.

  This indicator exports up operation:

  Export.Provisioning.All = True

  If you try to refine what you export, you must remove this line.

  Nick

• Fix CSS error

  I am creating a website for a client and its connection to ice everything works except the ability to display styles css in Ice while my text is in CSS and all styles have been created on the model, so whenever I try to join a region editible page style, he tells me that I need to attach styles to the page.  When I try to join I can't, I don't see that my model and when I tried to reach that (hopefully the css of it he would take) nothing happening (not a surprise).

  I really need to recreate my stylesheets on every page? This seems unlikely.

  I'd appreciate any help.

  Thank you

  Hello Angela,.

  Since all my text was created using style sheets it is necessary to apply a class from the drop-down list at all?

  I don't know if I can really answer, since it is based on how you want your region to behave. If you apply the style class to the region, when the Publisher changes the text in the region, it will use the class style associated with the region. If you don't want the region to use the style rules of class while you do not have a class on the region.

  And finally, how can I do an external style sheet to attach?

  You can easily manage styles that are in the head section of the template and move them into an external style sheet. Take a look at the next section of using Dreamweaver to move/export the CSS rules:

  http://help.Adobe.com/en_US/Dreamweaver/10.0_Using/WSD152C40D-CCA8-4901-BD43-FB9F1471A986a .html

  When you move and export rules in a stylesheet external, Dreamweaver automatically home/links the external stylesheet to the document.

  If you then / link to join the external style sheet to another document in the site (one that is not based on the model), do the following: http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WScbb6b82af5544594822510a94ae8d65-7e1ca .html

  Best regards

  Corey