VPN problem taking in charge the VRF CSR

Similar Questions

• Compaq Mini CQ10: His problem, when I charge the batteries

  Need help with the password for the error code: CNU004118Q thanks!

  Hello

  Enter: e9l11v33u5 (3rd character is a lowercase L)

  Kind regards

  DP - K

• HP G61 problem with charging the battery.

  Dear Sirs, I have read so many posts but I could not find a solution, so I decide to post one on my own.

  I have a HP G61 and work properly it works. The problem I have is with the battery.

  If I scream at the bottom of the laptop and leave it with the charger on when I start the laptop battery is full 100%

  during the initialization of the light of the current passes, the HARD drive light is normal and sometimes the charge light is on, a few times is off.

  I noticed that a lot of ppl have similar problems, so what I have is that

  With a multimeter, I have seen that the output power of the power brick is very well! Besides that I had three laptops computers HP with the same power supply, so I try this brick to the other laptop seems to work very well with the other laptop. I try another laptop PSU to this one and had the same problems.

  I concentrate so that the problem is in the battery. I download the HP battery checker and scan my bat (was100% charged) and the result was OK!

  so the mystery in this case is that the laptop does not work properly, I try full preformance, no problem at all, just the battery runs faster (make sence)

  While the laptop is running the power cord is plugged and there is no light on the side of the connector but there is light ot the power on the laptop.  As I m working with the laptop, then the charging light lights up and the battery seems to be linked to HQ and charcging.  sometimes says connected but no recharge! When I have the indicator of hip and pricing that could will a few seconds, then disappears and returns to the mode of unloading...

  If I shout down the laptop and let it connect with the brick power then the perception led can be turned off, but after a while turns on and stays on for a long time seems so at the normal charge...

  I know that sounds strange and crazy, but that's what happens...

  That this laptop works properly and I m ok with his performance (to the extent of the rest turned on) I see no reason recycling!

  the only annoying, it's that sometimes can not fresh at all so that it is turned on and of course after a while goes out...

  the battery is an original HP battery and if it is loaded to 100%, last up to an hour and something...

  hope I gave you a complete picture of what's going on with this machine.

  I tried also a few solutions that I found on the internet about the parameters of power controllers, ACPI etc. which seems to fix the problem with the power of microsoft management. This has had a small solution for a few days and then return to the former status. (I don't know if windows restores some steps on their settings)

  If there is a problem of material at the end of the day on the mobo, I would like to know it there is a chip or controller or any other component that I can replace. (I m engnr electronic so I can replace it) I had a few dead HP G61 models with screens broken, etc. or broken mobos

  Thanks in advance

  Stavros

  Hi @Polykarpos,

  You already have the troubleshooting that I would have recommended to you.  At this point, you should contact HP Total Care at 1-800-474-6836 in North America or Start here if you live outside of North America.

• I opened my laptop and I lit the charge then it shows connect to 65w adapter y at - it a problem with my charger?

  I opened my laptop and I lit the charge then it shows connect to 65w adapter y at - it a problem with my charger?

  I pressed the f1 key to continue, then my laptop recharges normally.

• T61, Vista Business with Cisco VPN problem since the last update on the Lenovo site.

  Hello

  I use a T61, Vista Business, Cisco VPN Client v.5.0.02.0090.  Since my last update, October 2, 2008 on the Lenovo ThinkVantage Productivity Center site, I can't connect to my VPN Office. It was working perfectly before this software update. The only thing I remember is the update of the driver for Intel 4965AGN card v.12.x. I went to v.11.5 but it's not better.

  When I try to connect, I get the message "secure VPN connection terminated by a peer. "433 reason: (reason unspecified peer). I did a test with 'ping' IP address of the VPN and the response of the address.

  Usually, when the VPN Client is able to make the connection in the network connection window, I see "connection to the network space 2 (the Cisco VPN system map)" enabling / disabling Disable to activate the State. But there in my case, turn it off.

  I can connect with another PC using Windows XP. Thus, the VPN works.

  Any ideas?

  Thank you

  I met a very similar problem with my X61s. I was able to fix this by removing the print reading software for which an update was also installed on 2 Oct. As I barely use the fingerprint reader, it wasn't a problem for me. The Cisco VPN worked never better...

• Internet problems after having disconnected the VPN session

  I was wondering if someone could tell me a solution for this problem I have.  A year or more ago.

  When I had Vista (32 bit), I used to use Cisco's VPN IPSEC client.  At the time, I found that when I disconnect a VPN session, something on my machine would get watered upward.  In other words, I could no longer RDP to my machine from another machine (which I would do so on the internet).  I also found that I could not access other services on my machine to other machines as well through the internet.

  Basically, I found this case I disabled/re-enabled my NIC (do it manually or by restarting), I was able to connect once more to my machine.

  Now I have Windows 7 (64-bit).  So now I also use Cisco SSL VPN client.  I had hope that this should disappear with the new operating system and the new VPN client, but the problem persists!  Fortunately, the Windows 7 Task Manager can be triggered based on the events that occur.  I created a task that will disable/re-enable my NIC whenever he sees the event of disconnection of SSL in the registry.  While this is a great workaround for me, I would go at the bottom of the issue.  I even helped others in my office with the same question by providing my elegant solution!

  Side note: my friend just asked me why he couldn't TRACERT what either.  He spoke to me through our enterprise IM client while VPN was in our network.  I asked if he was on the VPN on the attempt, and he said that it has disconnected first thinking it was the case.  I suggested to him that he can hit the same question that I have, in that the VPN is somehow corrupt its TCP stack or something.  I asked to disconnect from the VPN, once again, turn his NIC, and lo-and-here it could once more tracert.

  This issue is documented anywhere?  Are there patches?

  TIA,

  MCDONAMW

  What version of AnyConnect you test with?  This could be related to bug CSCsz12568 that has been fixed in the 2.4 client later.  What you can do is capture a snapshot of the Windows routing table before connecting, once connected, disconnected and then again later to see if there is not strange roads that can be bad traffic orientation.

• XP SP3 help & problem of taking in charge

  For some reason, I've lost "Help and Support" and it does not open.  I got this message: "Windows cannot find"helpctr.exe"make sure you typed the name correctly...» »

  I worked with this problem for a while.  I finally got "Help and Support" in Services', I could start to "Help and Support" by going to "c:\windows\pchealth\binaries" and double click on "helpctr.exe" began and all the parts I used to work here very well.

  I can't even start it from the 'Help' menu or the menu 'start '.  Same error message as above.  Frustration, I created a batch file to open "Help and Support" I called him 'help.bat '.

  It reads this: cd\windows\pchealth\helpctr\binaries

  begin to helpctr.exe

  It runs from this batch file, that I placed on my desk.  I suspect a registry problem which I think is the cause of the problem in the first place, caused by a cleaning program, that I must have run.

  How can I fix the registry for you this problem disappears.  Thanks in advance for your help likely.

  Windows XP Professional, Build 2600xpsp_sp3_gdr.100427 - 1636 (Service Pack 3)

  eMachines T2682, 2 GB of Ram, all the updates of course pilot

  Please answer questions following diagnosis by number in your next reply (no need to quote this post):

  1. how your message/problem is related to the features of Internet Explorer?

  2. did you recently do a repair for a reason WinXP install any?

  3. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  4A give Norton or McAfee application already installed on the computer?

  5. do you have a Norton or McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  ==================

  Cannot load help and Support Windows:
  http://support.Microsoft.com/kb/555472

  Menu help and bootable media will not open:
  http://support.Microsoft.com/kb/555329

  You cannot open the help and Support Center in Windows XP:
  http://support.Microsoft.com/kb/888018

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Do not charge the MacBook Air battery

  My macbok Air shows the power is plugged in, but the battery is not charging. The battery status is normal. The adapter led is orange.  I have reset the smc, but it has not changed anything Suggestions?   I thought a new battery and power cord would solve the problem but it doesn't.  Thank you

  Reset the SMC could solve the problem.

  Reset the management system (SCM) controller on your Mac - Apple Support

• Satellite M40 does not seem to charge the battery beyond a certain level

  Just a brief explanation of my work.

  I make repairs pc and laptop, replacement of jack, BGA/brazing repairs etc.;
  However computer have always baffled me. I have a Toshiba M40, although I know that this problem is not specific to this model.

  The laptop does not charge the battery beyond a certain level at the moment its impasse on 41%, it says loading in windows but do not go anywhere.
  I saw other portable that stick onto the other percentages 99%, 70% etc.

  I tried to completely discharge the battery (on windows) and reload (for Windows), and also tried to unload and reload not in o/s, if anything they seem to have made things worse as initially the issue of charge level was approximately 50% and more.

  By mistake the laptop wasn't for awhile so the battery flat, which probably did not help as I understand its best to store 40% battery when not in use.

  Any ideas what the problem is and if theres any way to revive this battery?

  Hello

  In my opinion, the problem is related to the breakdown of battery.
  I'm don't know how old your battery is but eventually should be replaced.
  After a long period of use, the battery loses the own performance and must be replaced.
  This is nothing unusual and often to used batteries.

  Welcome them

• Satellite M100 will not charge the battery while the computer is on

  Hi all

  I have a M100 and the battery won't charge while it is running.
  The battery starts to charge when I plug in the adapter and the orange light comes on. 10 seconds later it stops charging.
  If the battery has more than 90% of the costs it wll the rest very well.
  I have three batteries that all do the same thing on this computer. All three batteries are working fne on my other M series.

  When the computer is off, it loads very well.

  Why is it so?

  Hello

  I think that the problem of charging the battery is about the problem of portable equipment.
  Maybe it's something s wrong with electronic power supply or another part on the motherboard.
  I doubt that the problem could be solved by updating the BIOS but you should definitely check if you are using the latest version of the BIOS update and test again
  If that does not help, then you should get in touch with a local service for verification of equipment technician

  But note; If it s the question of the motherboard, the motherboard needs to be replaced and it would be a costly affair

• How to stop taking control in the page from popping up every time I double click on the firefox desktop icon?

  Pop - up when I double click the icon of firefox on the desktop, the home page and control of two-page fact sheet page. How to stop taking control in the page from to appear repeatedly when I double click the icon of firefox?

  You can solve this problem with the file blocklist.xml was forced to update.

  See:

  • / questions/832793? page = 2 #answer-198407

• Satellite L755 would not charge the battery

  Hi all. I bought a new laptop today... it wouldn't charge the battery so I exchanged in-store. The replacement also has this problem. I'm doing something wrong or I was just unlucky?

  The battery in the bottom right of the screen icon tells me that the battery is 0% charged, but he is in charge. The red light on the laptop before left turns as if to show that the battery is being charged also.

  Yet battery does not charge.

  If I unplug the laptop from the network, the laptop turns off instanty.

  It is today the second laptop brand new with the same problem. Maybe a part of a lot of battery defective or is - a problem that can be corrected with the software? I don't want to take the laptop to the store for a second time in the day.

  Post edited by: BigBlueLou

  Hello

  If the laptop stops immediately after that the AC adapter is not unplugged, it means that the battery is empty and not loaded.
  Are you sure you plugged the battery correctly into the battery bay?
  Please check if the battery is well suited.

  In addition, I recommend to remove the battery and unplug the AC adapter.
  Then press the power button / stop along 30 seconds and reconnect the two parts.
  Then leave the laptop connected to the network for a longer period of time (2-3 hours).
  Then check the battery charge level

  If he would always stay at 0% then I recommend you visit the dealer and check the other unit or the battery.

• Satellite A300-1 MB - do not charge the battery

  Hello, a friend of mine gave me the laptop a300-1 MB and it has a problem. It is not the battery.

  I changed the battery and the charger with another laptop that work well, but they have not worked in the mine, but the only way to charge the battery must have the laptop off, put the ac charger, remove the battery and reconnect the battery. Then he is in charge. In which case I have remove the charger and connect it to the laptop it stops again loading.

  are there solutions to this?

  Hey,.

  If you can only charge the battery so that the AC/DC adapter is plugged in, I think that the problem is hardware related. I mean that if the battery will be recharged while the laptop is turned off, the battery seems to be ok and even the AC/DC adapter. Theoretically, it could only be linked to the motherboard

  I think you should contact the nearest authorized service provider. Guys can check your laptop computer and help you to swap the motherboard.

• Unable to charge the Toshiba NB200 at all

  Hello

  I recently bought a Toshiba NB200 and after that the battery has finally failed, I tried to load but to no avail. When I plug in the charger, the sheet of light at the bottom with all other types of lights (HDD light, seeing the battery etc) shined green while the battery light was orange all the time even if I left it for a long time. Every time I tried to turn on the computer, while the "charge", only, I could get as far as the windows start page when it turns off by itself because of the low power.

  What problem I have because it seems weird that the plug led is green while the battery light is still orange after a long period of time.

  Is there anyway that I can fix this problem or any other method if this problem cannot be solved?

  (Well a point to note is I bought my laptop in Thailand and it loads fine, but when I got the laptop, I can not load but the thing is that I brought my laptop previously bough Thailand to Singapore and it worked fine, so I don't think not its anythign wrong with the laptop being from different countries and all)

  Thanks in advance for any help. : D

  I think that the problem lies in your power adapter, which has been purchased with your laptop in Thailand. Asia and Europe use the same standard of electricity (I think?) but it's different in America. If you're lucky your battery may still be usable. You have to buy an adapter designed for America.

• Satellite M50 - charges the battery only when stopped

  My Satellite M50 battery only when stopped. Does this mean that when I work I'm still running on batteries, which of course carry out completely after 1 to 2 hours. Then I shut down the computer and it started charging again (orange led), and after a few hours, I still have a 100% charged battery.

  Of course, this means that the computer is not available. Until a few weeks ago it used to have the same problem if I disconnected the power plug then reconnected it: the battery needed to dump then to 0%, even if the power is connected, but now the problem is constant.

  I've updated to the latest version of the BIOS, I could find and even completely reinstall windows from the recovery disks, but the problem is still there. The computer is a Toshiba Satellite M50 - 126 model PSM51E, the BIOS is Phoenix BIOS v2.10

  Is it possible that the BIOS is damaged of some sort? I tried to reinstall V2.10 but he told me that I have the same version and it will not be installed.

  Hi lartech,.

  You can recharge the battery if you get into the BIOS and made the battery charging icon light?
  Are you using the original Toshiba AC/DC adapter and battery?

  In the worst case, it s a malfunction of the motherboard, and you have done what you can do: BIOS update and to install Windows from the recovery disc. If this doesn't help s a bad hardware work.