Export the large catalog of work on laptop

Similar Questions

• Is it possible to export the layers of work plans?

  I was so happy when Adobe introduced plans to work in Photoshop. And was impatient to try it on the practice. And earlier I finished Web site design that has by page 3 work plans. And a lot of layer comps on every page.

  And it turned into a nightmare...

  I can't export all the layers automatically. I have to manually put in each layer comp, click on "export as...". ». In the same file names are the same (called as a work plan). So I have to rename the exported images before the switch then layer comp and export it.

  If I use the command "export > Layer Comps to files...". ', it exports all work plans in 1 file for each layer comp. But the worst thing is that these files look like this:

  -with huge space empty around work plans.

  I spent a lot of time designing the site and now I even can't show the client!

  So my question is:

  Is there a way to export the layers of each work separately plan with corresponding file names? (as it works for the old "Layer Comps to files... ("without work plans).

  But if there is no solution I think it's a major issue in usability.

  Thank you in advance for your help!

  If nothing else arises perhaps you should ask for help on to

  Photoshop scripts

• FN + F3 disable the Touchpad does not work. Dell XPS L702X

  Hello, I am new to this forum.

  The function FN + F3 that disable the Touchpad does not work, my laptop Dell XPS 17 (L702X)

  I googled my problem and the only thing I found was this: http://en.community.dell.com/support-forums/laptop/f/3518/t/19454265.aspx

  I think that my problems with the touchpad started when I plugged a mouse into the USB port. It didn't work (it worked well before), and in material-sound-mouse control panel, the system asked me to uninstall a driver or other. I do not remember, but later the mouse worked.

  After this weird thing with the mouse, I noticed that the touchpad was malfunctioning. While I write, the cursor moves without touching the touchpad, it is annoying because it makes me write bad because he is moving in the middle of writing, as I write so it's a mess.

  The second oddity, the Fn + F3 does not disable the touchpad, the orange light come on (the led on the top of the touchpad), but the cursor can be moved in any case, with or without a connected mouse.

  I checked for driver updates, perform an audit of the system, checked for viruses, spywares and I don't know what I could do. I don't know if the problem with the mouse had nothing to do with the function Fn + F3 problem.

  I have not formatted or re installed windows 7, never.

  In Device Manager I have this:

  -mouse and other pointing devices:-Compatible PS/2 mouse

  Help, please. Thank you.

  DOH! Problem between Chair and keyboard...

  C:\dell\drivers\R289237

  Run the executable file of Synaptics.

  Download of extracts only the program on your disk. You must manually install the driver for the Synaptics touchpad with its own executable.

  FN + F3 now disables =)

• Even export a large round "watermark" on my picture.  What gives?

  When exported, a large round watermark, as the circular image a cup of wet coffee left on the counter on my image.  What is c?  She appears briefly on the image when I go Fullscreen in LR, but then it's gone.  It does not appear in the develop Module, only when I toggle full screen.

  When exporting, the large round mark reappears on the image.  What is c?

  No idea, please provide a screenshot or a file with it.

  Also provide us with information about your system/lightroo settings. We can Claudine Lightroom, but we aren't big readers of mind!

• Impossible to import new photos to the default catalog in LR3, 5

  Hello!

  I'm in LR3, 5 on OSx10.5.8 and recently, I lost the ability to import new photos (from hard disk). My default catalog (so far I use only) contains pictures of appx.33k and I can't import to new shots. Yesterday I was shooting tethered camera and everything went well. Today, I wanted to import new files (from disk) and noticed that 'import button' is totally inactive. Dead. I have implemented a new catalog and managed to process the photos today, but when I switch to the previous catalogue the 'import' button is always dead.

  Thoughts? Ideas? Help, please!

  Thank you in advance!

  I try to rename/move the preferences file and see if it helps. I see that you have exported the entire catalog as a catalogue. The exported catalog normal behavior?

  Beat

  Edit:

  BTW, your histogram looks funny too!

  Post edited by: b_gossweiler

• Is there a way to export the new settings customizable toolbar to my laptop?

  Is there a way to export the new settings customizable toolbar for my laptop?

  Thank you, Tom

  There is no automatic way, but this might work: in the "Customize toolbar" window, select "Save Preset," save your settings to a file and then move it to your laptop through the method of transfer of file of your choice. Then on your laptop, simply "Load Preset" from the same window.

• How to import a file exported as a catalog in the current Lightroom Catalog.

  I exported a record I was working on LR to a catalog so that I could work on it on a trip.  I would like to "sync" it upward with the original file to LR without losing the changes made during a trip.  I could just go on the catalog that I created for the trip, but would like to hang out in the original catalogue. Any suggestions?

  Thank you

  -Kevin

  Hey Kevin,

  You can go to the file menu in the original main catalogue and choose the import option in a different catalog for this trip catalog images in this one.

  You can read this article:

  Adobe Photoshop Lightroom Help | Import photos into Lightroom

  Kind regards

  Claes

• Can I retrieve the current catalog, I was working in even though she was not saved?

  Hello!

  I am new to Lightroom and using a forum so I hope I'm doing this right.

  Problem: 09/05/15 I tried to find a missing file. Doing so I went to where my backups are stored and clicked on the different back ups - and revived one of them. I'm assuming THAT I would be able to return to the catalog I was working while my system crashed or anything. Of course the second I opened a backup I thought so - OO, I bet that I should have done a backup of all - but too late. I went into the recently opened catalog and I can open only those of my backup location that I had opened. Is it possible to display a longer list of recent catalogs? If I could go down a catalogue over on the list, it should be that I worked in the 05/09/15. My last backup was 02/09/15 (which I did) - but there no changes that I made to the photos on the 05/09/15. Please tell me that all is not lost. I have a working days which does not bother me again - but the biggest problem is that I don't have a way to know what records, I made arrangements in so I wasn't on a list, it was random.

  I'm on a PC - if I did a restore of the system to 09/05/15 - which would give me my catalog of 09/05/15?

  I hope I explained this in a way that makes sense. I'm really stressed, what is lost is a customer. Help, please.

  Thank you!!!

  Your catalog of 09/05/15 work is still on one of your hard drives, everywhere where it was when the problem occurred. Lightroom does not delete it or destroy. Use your operating system to find all files whose name ends in. LRCAT and then open each one (double-click on it) until find you the one you want (it will likely be the date 05/09/15).

  I hadn't saved my work from 09/05/15 on my external hard drive

  Your work is saved automatically in Lightroom. Once you find and open this catalog file, your job will be there, and if you wish you can export it as needed.

  When I go into the folder My Pictures-LIGHTROOM - that's when my backups are

  Backups should not be stored on the same drive as your catalogue of work. This isn't a good idea. Backups must go on a different physical disk than the catalog of work.

• Export the catalog incl. Publication services

  Hello

  I just exported a Lightroom 5 catalog from one hard disk to another. Very well, I had all the files and images and settings, but miss me my services to publish (publish on Google Drive). When you export the catalog I scored the top folder of the page "Photos".

  I have a lot to publish folders serive why I would be grateful if someone could help me get these in my new catalog. Thanks for your help!

  Peter

  Peter, you shouldn't have re-imported the files on the disk.

  You can remove rom the catalogue and rightclick just folders in the library and select Update folder location. This will keep all your previous work intact as well as the history, etc.

• I want to copy the files published on a second computer, do I need to export the catalog or can I just copy

  I find that I edit the files on my phone but I want the files, with their changes to reside on my desktop also.

  I had exported the folder as a catalogue, but can't think of shy, I can't just copy the folder that contains the files in RAW and XMP formats and import the folder on the desktop PC. This option seems to work as well as catalogue option.

  Any reason I should choose one way over the other?

  Use Lightroom 4.2

  Thank you

  Kelvin

  You use the Export as Catalog method.

  There are things in the catalog that are not stored in XMP.

• LR has been impossible to export the catalog previews and negative

  My first post in this forum.  I want to delete all of my iMac to upgrade from Tiger to Snow Leopard and then charge back.  First job is to "Export as catalog" all my photos (about 6000) since the Mac to an external hard drive (Maxtor OneTouch 4Plus, 450 GB of available).  I tried 6 or 7 times and each time getting a similar message - see line object.  I deleted unnecessary files, managed to get rid of unused keywords and exported 2000 odd of my previous pictures in JPEG format to archive in order to reduce the volume.  I reloaded LR and updated to 2.6.  In the export dialog box, I ticked 'Export negative files' and 'include available Previews.  Export gets to about three-quarters of the way through each time until I get the error message and I have to give up.

  Appreciate any assistance.

  Raymond
  Melbourne, Australia

  All THE PHOTOS is included in your LR folder hierarchy?  If this isn't the case, then you must click the right button (or whatever the equivalent of Mac) on one of the folders in your hierarchy of LR and choose to include the Parent folder.  Once you have done this and everything copied, you can file missing just locate on a high back and you will find everything under it.  If you have not the parent folder in LR before copying, you will need to locate the missing files on each of the top-level folders.

  Once you have copied your pictures, you can rename your local copy of all THE PHOTOS to make sure that you do not accidentally, and then locate the missing folder to make sure it works on the remote location.

  Once you are satisfied with your catalog is to see all distance and when you're ready, copy your catalog and your previews and backup folders above and rename the local copy of the Lightroom to open accidentally this copy of the catalog, even once.  I copy things, instead of moving them, in case something happens, you can start over.

  If you immediately update your mac, then copy all three documents, other than iChat ones, pictures on your remote disc and open the remote catalog and find files while missing only one.  I suggest take only pictures, first of all, in case you want to continue to work on the pictures, the local copy of the catalogue will be faster, but if you're ready to upgrade, then simply make all copies at the same time.  All THE PHOTOS and excerpts will be time-consuming copies, catalog, itself, will not take very long.

• Export the catalog paragraph ESD

  Hello all and thanks in advance for any help.

  I am currently working on the import of XML in Framemaker. I'm fairly new to Framemaker, but after reading the technical paper on XSLT and structured devleopment I think I my mind around it.

  So my thought is take our complex xml and import with an XSLT transformation to a paragraph/character basically style structure that I have then 'apply' a DSP with rules in shape. I worked through some examples, and this doesn't seem to be a problem.

  My arrises problem that these documents be published in Framemaker, I have a catalog huge paragraph. Is there a way to export these to a DSP, so when I import the XML file I can convert the elements in the same names as the paragraph/character style? Did I miss an easier way to do it?

  We seem to have diverged at least three subjects on this thread:

  1. the original since April last on the creation of an EDD in which names of components names match paragraph format.

  2. referring to paragraph and character entries catalog in a DSP rather than specify explicit formatting properties

  3. prevention of the replacements in structured documents.

  I'll give you my late response on the first topic here and then start new discussions on the other two.

  The original post asked about the import of XML in FrameMaker. The proposal was to use XSLT to transform the original XML in a form derived in which element names put matched the names of FrameMaker paragraph format. The answer was that there is no automatic way to do it.

  In fact, there is an automated way:

  1. create an informal document that contains at least a paragraph of each format in the paragraph catalog.

  2. use the StructureTools > command to generate a Conversion Table to create a new conversion table.

  3. save the table of proposed conversion and let it open.

  4. from the original, use StructureTools > utilities > Structure current Document, specifying the conversion table generated to create a structured version of the document.

  5. in the generated structured document, use StructureTools > Export item Catalog as ESD to create ESD desired.

  The implicit question in the original message has been if using XSLT and such an ESD is a good approach. Given that the message says new edition was scheduled in FrameMaker, the answer is probably not. In many cases, the logic of the XSLT transformation can be duplicated with the logic of the context rules and level in ESD - ESD capacity is what makes FrameMaker a feasible structure editor. Implementation of the mapping of the structure of the element formatting in the file XSLT in FrameMaker is a unique, made operation FrameMaker opens the XML document. Implementation means mapping in the ESD context verification is done continuously as the writer changes the document. She recorded the writer of the need to learn that both XML formats markup conventions used for XML and FrameMaker paragraph documents. And she makes probably much more feasible to generate new XML documents edited versions.

  However, there are contextual situations that can be tested in XSLT, but not an ESD. It is:

  (1) put a derived feature of its descendants (a DSP can test the ancestors of the element, but not its descendants)

  (2) put a feature as it is his parent to the first or last child of a particular item type (a DSP can test if an element is the first or the last child, but not whether the first or the last Para, Item, etc..)

  (3) put in shape an item based on the number of items previous, there (a DSP can test if an element is the first, last, or an only child of its parent and that it precedes or follows an element of a particular type, but cannot test whether, for example, the 3rd child of its parent, or the 95th Para in a Section).

  (4) the special characters within an element tests.

  These restrictions were deliberately designed in FrameMaker to make feasible response interactively. Otherwise, each Assembly are likely to cause reformatting of the entire document, and the response time is not practical for an interactive tool. The issue of response time is irrelevant to XSLT, which is a discontinuous process, applied to a static document rather than one that is constantly evolving.

  The above discussion that does not reject the use of XSLT as part of a request for FrameMaker. XSLT is useful when the structure of FrameMaker and XML structure do not match exactly. These cases include:

  (1) the structure of FrameMaker can be simpler than the XML structure. Suppose that a business uses a DTD or a schema that is much more flexible than necessary in this particular environment accessible to the public. For example, if a drafting group has always written in a language, but the DTD requires a language attribute, XSLT can provide the value of the attribute and the writer of spare all need to be aware of the attribute. Or, if the Organization has never multi-alinea list items, they can use XSLT to a mapping between a structure such as:

  
       
           blah blah
       
    

  in XML and simple

  
        blah blah
    

  in FrameMaker.

  (2) the exact structure of the XML element cannot be helped in FrameMaker. For example, in XML a single figure element may include both the legend of the figure and a reference to an existing graphic file:

  FrameMaker requires elements separate the legend and the chart itself and cards natively in XML such as:

  
       
        My new grandson
    

  (3) the order of items may differ in FrameMaker and XML.

  (4) form Framemaker or XML of the material can be a database of document including some but not all content is extracted to produce the other form.

  -Lynne

• Firefox support website, but page, only on the desktop, no connection works fine on laptop

  Prosper.com homepage works fine, but when I try to sign in the new page not load, get only white screen. Works fine on the same computer in Chrome or IE, also works on laptop with the same version of Firefox. New problem started about 1 week ago.

  Hello

  I'm glad to hear that your problem has been resolved. If you haven't already done so, please select the answer that solved the problem. This will help other users with similar problems more easily find the solution.

  Please contact the Mozilla Support.

• To work with the text to the assignment by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not start to rise upward, as happens in other browsers. I ask you for

  After the transition to Windows 7, there was a problem with Firefox. To work with the text to the award by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not ascend to the top as it was earlier, and like that occurs in other browsers. It is necessary to press the other key "down" which is him very troublesome. Resettlement on an earlier version (8.0) earlier irreproachably working, gave nothing. I ask you to help

  You must activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).

• iTunes on my laptop does not recognize my iPhone 6. My laptop, it is just the iTunes is not working.

  iTunes on my laptop does not recognize my iPhone 6. My laptop, it is just the iTunes is not working.

  If you do not see your device in iTunes for Mac - Apple-Support - https://support.apple.com/HT203979

  Device are not not immediately after the upgrade - https://discussions.apple.com/thread/6573744 - try to restart

  You don't say anything on your computer.  I don't even know if it's a Mac or a PC. This may apply to you:

  iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher.  Update of the system only checks the updates for the current version of the system you run, but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. If she can run 10.8.5 or higher, you can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM.  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Mountain Lion 10.8 purchase link United States of America - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

  Mountain Lion 10.8 purchase link U.K. - http://www.apple.com/uk/shop/product/D6377ZM/A/os-x-mountain-lion

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.