export the movie as a multimedia file

Similar Questions

• What are the best settings to export the .mov file? my video jumps

  What are the best settings to export the .mov file? I have movie 1280 x 720 and I can export without problem, but sometimes it jumps or gets stuck when I play. I don't know if it's my video card or the actual file. I used better quality setting and compressor H.264.

  Thank you.

  As you suggest, it could be a problem with your hardware that is not in a position to make the video on this particular resolution,

  I tried the same thing and it works fine for me without any problem. You can always export the movie in a format you want and then use other software video converter to get the desired format. If your video does not work then you can also, to let know you that there is a problem with your hardware.

• Cannot export the movie - unknown compilation error - Help!

  I edited a 32 minute film in first items 10, and now I'm trying to export it.  At any given time during export and it seems to vary, I get an error of unknown compilation.  I tried to export the movie from last week and all I get is same failure tried almost everything what I found written on how to solve this problem.

  I have Win 7 Ultimate SP 1 running on a desktop Lenovo with an Intel Core 2 Quad CPU 2.67 GHz, 4 GB of RAM, 32 bit proc.

  First is installed on drive C with 6 GB of free space system.

  Project and scrach disks are on drive D with 165 GB of free space.

  The multimedia files are on 2nd drive E with 50 GB of free space.

  Project and most of the material source is NTSC DV - there are quite a few photos with the movement, as well as some iPhone HD video on the timeline, hundreds of clips in all more narrative, some titles, etc.

  Export destination is the D drive.

  Will be made to the green lines at the top of the timeline (sometimes it stops during rendering and I have to keep hitting Enter to continue rendering, but ultimately it's all green)

  So far I have tried:

  -Reinstall EP 10

  -Reinstall Quicktime

  -Copy all the photos on their own separate folder

  -Editing of each photo a little (apart from PE 10) and re-register to make sure that none of the pictures are corrupt

  -Empty the temp folder

  -Removal of all renders and cache files and let them rebuild

  -Export of small pieces of the timeline to try to identify a bad clip - it is a maddening process and I found a clip that is generating the error, but I managed that export to AVI and re-import and replace it on the timeline.  It would be very nice if PE would just TELL ME what music he loves not if in fact it is a mistake to clip.

  -Turn off the shadow / highlight the functionality I had on some clips, but it wasn't the issue, more small sections with these clips exported correctly

  -Tried to export in different formats: iPad Vimeo SD, MPEG, DV Standard, Standard of high quality AVI - all result in the same error (the format I want incidentally is SD Vimeo)

  -Reboot the machine and transform everything that could possibly consume memory

  This machine has never had any problems for export in the past.  One thing I tried worked - installed 10 EP on another machine (less capable) of Win 7, and fed all media via an external drive.  The other machine made fine export (though it took awhile because it is low-powered).  Is nothing more than a work around edition even though, as I don't normally have access to this machine and I haven't.

  I'm at the end of my mind!  What else can I do to get this movie file to export?

  Appreciate help or clues which allow you to solve this mystery.

  Ouch! 6 GB of free space on your C drive? This is no doubt the bulk of the problem!

  RID another 20 GB of free space on your C and then defragment the disk and it's probably your problems with go away.

  Assuming, of course, you resize your photos, by note of the Bill.

• When I export the movie track of musk does not move properly

  When I export the movie track of musk does not move properly

  Hi Ann and Neil,

  Thank you for this, I had to import this project to another to keep my settings, so I womt lose the long job

  but after that I choos in the project of the EMT, since before it was cuda - and now its good performance.

  appriciate it.

  Gila

• I don't understand why suddenly software won't let me export the movie My she tells me, on all projects, there is an unknown problem and won't let me export

  I don't understand why suddenly software won't let me export the movie.

  She tells me, on all projects, there is an unknown problem and won't let me export

  This is now happening to me also. I've been editing happily nonstop for two months without this problem. The same project even made without problem a few days ago. Then update WME was released - he says something about fixing bugs? Now the first fails to encode using the encoder, Cuda mercury as in the photo of the op. No other changes to the system. Sometimes the first blocks also. Also noticed before makes oblivion on reload.

  Have tried - new driver nvidia, new projects, new sequences, removal of caches, different drives, uninstall and reinstall WME and first, reset the preferences.

  Very easy 9 min chronology of rendering fine just 4 days ago. Only lumetri, masks, stabilizing warp, moment 4 k - S.redgiant

  780GTX 32GB PC with several SSD and 7200 drives, i7 6 GB, Win 8.1 64

  --

  Update: has been working through some things with care. Really useful. Looks like it's specific project. Can be exported in single CPU mode. Put up-to-date I've run some additional tests. Older project exports ok.

  --

  Update: as I am with nvidia I downloaded the driver, custom installation selected, checked the box for a clean install. (according to the Adobe support chat)

  Do not click on the "maximum make quality" for the resizing option.

  Currently works for export in 1080. Will try 4 k later but at this point, it seems that the clean install video card driver that he fixed. It's all about a k 4 timeline.

  --

  Update: the custom clean install of nvidia driver finally solved the problem. Now, I can export the same project with all settings and sizes. A big thank you to the customer supports the person (MS) to tide me over.

• Export the result to an Excel file

  I use the attached script to export the inventory then as excel file. I used LucDtechnical of this post to store information in a CSV temp and later, save them to a XLS file. I need to perform a certain formatting in the report, as to change the size of the font of the header, adding some background colors.

  Do not the formatting as I am exporting to a CSV file. Is there another way to achieve the formatting?

  You can take a look at my post Export-Xlsx, the suite and ordered data .

• Unable to export the movie using XDCAM presets

  Hello

  We are facing a problem of export of sequences using custom presets for XDCAM to our panel.

  question:

  Our Panel, we export the sequences based on a "Preset" personalised XDCAM. But the sequence is not exported.

  The output file created is sometimes Kb. We use the code

  seq.exportDirect (outputfilepath. MOV, custompresetPath)

  to export the current sequence.

  When we manually select the sequence and make

  File-> export-> media->

  And import the custom preset of XDCAM and export its creation at the exit.

  First version - 2014.2 (8.2.0 (65))

  Media - 2014.2 (8.2.0.54) encoder

  and OS x version 10.9.4

  Can you please suggest a solution for this problem as soon as possible.

  Thanks in advance

  All the ExtendScript encoding-driven since the Organization should be based on the encoder (modern, fresh, tested, clean) API, not the. exportDirect() (unsupported, obsolete, treacherous). See PProPanel sample code.

  https://github.com/Adobe-CEP/samples/tree/master/PProPanel

• How to export the MOV?

  Hi all

  I have MTS files 1280x720p 29.97 FPS aspect Retiro 1:1 square pixel.

  I ecoded to MOV file to import it into CS3 PP is the best?

  While exporting the encode the file, I use Adobe media encoder as follows:

  Format: H.264 Blu - ray

  Preset: Custom

  Video export is verified

  Export Audio is enabled.

  Video: NTSC, 1280 x 720 @ 23.976 high profile

  AudioFormat PCM (I don't know what is it?)

  Multiplexer: tried TS & none

  When I get the file exported to my surprise there is no audio chanel at all.

  Anyone can unmask me what I did wrong?

  Thank you

  Shaul

  Bingo,

  I support the recommendation of Ann on Cineform, I bought on the advice of her and others I respect here and have been happy with it.

  Be aware of one thing, however. While I can't speak for CS3, CS4, I learned that the first is not correctly interpret the color for files HD space (I mean probably not correctly, guys, I learned here can better explain). The result is what you get in Cineform will look much hotter that you see in the first, but the version of Cineform is in fact a correct interpretation.

  With this caveat, highly recommended. Good things and not terribly expensive.

• Export the registry to a text file

  Hello community

  We have created different variables in registry for various rules, for example, we have our own rule of "Ability to fileblah system" which refers to our own registry '_FileSystemCapcacityWarningblah'variable and it contains "custom" for different drives settings, for example, rather than using the default of 90%, drive C:\ fred.company.com has a value of 95% and D:\ has a value of 97% and so on.

  A customer suspects that he will need this custom information to a compliance report so that he can prove that we monitor X-system but Y-system from 90% to 95% etc.

  I found different ways to export the whole registry as an XML file so that it can be imported into another FMS, but not what I'm looking for.

  Is it possible that I can export a variable (or group of variables) in a text or CSV file?  I know that you can export the table of registry values, i.e. my customizations, by clicking on the box at the top of angle (first photo), but it does not show the name of registry variable nor any of the default settings, the customization procedure (second photo):

  In addition, it would be tedious to do each set individually and then explain what each is for

  Is there an easy way to export complete registry settings to a text/CSV file for some variables?  Ideally, for any variable registry that begins with "Blah_".  In this way, we can give our customer a file containing the following information:

  • Name of registry variable
  • Description
  • Global default
  • Type of topology (perhaps not necessary, but can be useful to have)
  • Topology object name
  • Value

  Thank you

  Brian

  Hello

  dumping the whole registry creates something... rather difficult to analyze. If you only for your controlled series of gloom, do not schedule performance (values according to the window) so this should be a good start:

  prefix = "blah"result = ""
  
  rs = server.RegistryService
  
  rs.getAllRegistryVariables().each() { var ->
  
    if (var.getName().startsWith(prefix)) {    global = var.getGlobalDefault()?.getDefaultValue()    if (!global ) global = ""    result += var.getName() + "(" + var.getComment() + ")" + "\n"    result += " + global default = " + global  + "\n"
  
      var.getRegistryValues().each() { val ->      if (val instanceof com.quest.nitro.service.sl.interfaces.registry.TopologyObjectRegistryValueInterface) {        result += " + " + val.getDisplayableName() + "(" + val.getTopologyType() + ")" + " = " + val.getDefaultValue() + "\n"      }    }  }
  
  }
  
  result
  

  It runs in the editor script or through fglcmd, export what you are looking for I think. See also your info api SL of the local server.

  Hope that helps
  Nils

• How to make animation nesting work when I export the movie?

  The symbol has no animation when I export the animation.

  Is there a stop(); order in the timeline of the animation (assuming it's a scenario animation)?  Is the movieclip symbol?

• Cannot export the movie

  Since the upgrade to El Capitan, I can't export 'share' a movie from Final Cut Pro 10 file. I really don't want to have to go back to 10.10.

  Help!

  Why not you? What you do and what happens when you do that? What you see when you try to export?

• Export the clip to an AVI file

  Hi all

  I hope someone can help a beginner.

  I try expost a clip from a longer movie in a separate avi file.  I know it's pretty simple, but I have read the help files and knowledge base and can't seem to make it work.

  Would appreciate any help.

  Thank you

  Mark

  If you the Clip has been modified to meet, you just need to action, which is exports. Choose the Preset DV - AVI and it's ready to go.

  If you have other Clips, you can adjust the WAB (work area bar) for just this Clip and do the same thing, check the export bar working area in the dialog box.

  To watch the WAB:

  

  Good luck

  Hunt

• export the movie with images h.264 in quicktime does not work

  Hello - I was unsuccessful (hours) seeking to export a 6 min change to quicktime movie.  Have you tried exporting to quicktime, tried using compressor, tried the tips on changing the settings of compressor (from this site) and it doesn't work.  If there is a simple solution or a link I can follow steps, I'd love to have it and am grateful!

  Specifically, what is unsuccessful so that we can help?  Quality?  If it crashes?  What do you mean exactly?  Export a few different steps and we can help you, but we need to know where you get stuck.

• Help me to export the movie with chapters, as well as another question

  Hey so I'm using a mac mini with el Capitan and fcpx with idvd.  I can't get iDVD to recognize chapters, yes I ticked the box before exporting it. My film is also long only 39 minutes. Why when I export its 6.66 concerts? and it has changed a few times when I just use Master file for export... There was once to 2 gig now its more than 6. How this happen what am I missing... Sorry for the questions... Also, I have compressor but don't know what to really use on there also... Thank you

  Enter chapter markers in the time line do FCP X.

  Export in a master file. This can be greater than him starting point as the original film can be compressed.

  Drag the master file in iDVD. Make sure that iDVD is configured to accept markers.

  Al

• Export the movie in Media Encoder provides support screen offline

  I've recently updated to the latest versions of first Pro CC (2015.3) and Media Encoder (2015.3) and since the update, I had issues of export of sequences in Media Encoder. The issue I'm having is that everytime I try to export a sequence from the SOUL, it gives the screen offline, on the same clips in the preview window, even though they appear correctly inside the preview in PR. window the really strange thing is that when I export directly from the menu "Export Media' in first itself with the same export settings, everything is fine.

  These project files are templates for the videos that I do on a weekly basis, and they worked perfectly fine before the update.

  I tried the following steps, but had no joy with this problem:

  • Creates a new sequence with only the relevant clips.
  • Created a new project with only the relevant clips.
  • Moved to the location of clips on my drive hard and at PR
  • All the project files and clips on my laptop and used the pre version updates of PR and SOUL, these exports very much copied.

  My tests, it seems that there is a problem with SOUL not recognizing some .mp4 files because it is the only common thing between the affected elements, but happens not all the files in .mp4 h.264.

  I found the solution by another Member of staff.

  For those who have the same problem, what I had to do was make sure you I have deselected the "import footage natively" in the preferences of the SOUL.