Cannot export the movie

Similar Questions

• Cannot export the movie - unknown compilation error - Help!

  I edited a 32 minute film in first items 10, and now I'm trying to export it.  At any given time during export and it seems to vary, I get an error of unknown compilation.  I tried to export the movie from last week and all I get is same failure tried almost everything what I found written on how to solve this problem.

  I have Win 7 Ultimate SP 1 running on a desktop Lenovo with an Intel Core 2 Quad CPU 2.67 GHz, 4 GB of RAM, 32 bit proc.

  First is installed on drive C with 6 GB of free space system.

  Project and scrach disks are on drive D with 165 GB of free space.

  The multimedia files are on 2nd drive E with 50 GB of free space.

  Project and most of the material source is NTSC DV - there are quite a few photos with the movement, as well as some iPhone HD video on the timeline, hundreds of clips in all more narrative, some titles, etc.

  Export destination is the D drive.

  Will be made to the green lines at the top of the timeline (sometimes it stops during rendering and I have to keep hitting Enter to continue rendering, but ultimately it's all green)

  So far I have tried:

  -Reinstall EP 10

  -Reinstall Quicktime

  -Copy all the photos on their own separate folder

  -Editing of each photo a little (apart from PE 10) and re-register to make sure that none of the pictures are corrupt

  -Empty the temp folder

  -Removal of all renders and cache files and let them rebuild

  -Export of small pieces of the timeline to try to identify a bad clip - it is a maddening process and I found a clip that is generating the error, but I managed that export to AVI and re-import and replace it on the timeline.  It would be very nice if PE would just TELL ME what music he loves not if in fact it is a mistake to clip.

  -Turn off the shadow / highlight the functionality I had on some clips, but it wasn't the issue, more small sections with these clips exported correctly

  -Tried to export in different formats: iPad Vimeo SD, MPEG, DV Standard, Standard of high quality AVI - all result in the same error (the format I want incidentally is SD Vimeo)

  -Reboot the machine and transform everything that could possibly consume memory

  This machine has never had any problems for export in the past.  One thing I tried worked - installed 10 EP on another machine (less capable) of Win 7, and fed all media via an external drive.  The other machine made fine export (though it took awhile because it is low-powered).  Is nothing more than a work around edition even though, as I don't normally have access to this machine and I haven't.

  I'm at the end of my mind!  What else can I do to get this movie file to export?

  Appreciate help or clues which allow you to solve this mystery.

  Ouch! 6 GB of free space on your C drive? This is no doubt the bulk of the problem!

  RID another 20 GB of free space on your C and then defragment the disk and it's probably your problems with go away.

  Assuming, of course, you resize your photos, by note of the Bill.

• I am running xp sp3 and cannot find the movie maker software in the all programs list, how can I access this software application

  original title: access to Movie Maker

  I am running xp sp3 and cannot find the movie maker software in the all programs list, how can I access this software application?

  You are welcome and thank you for the comments.

• Windows Movie Maker cannot publish the movie to the specified location

  From: patiotaiza

  Message: I have a 5-minute project and trying to publish it on my PC I get the following message:

  "Windows Movie Maker cannot publish the movie to the specified location. Verify that the original source files used in your movie are still available, that the publishing location is still available, that there is enough available disk space, and then try again. »

  I have enough space available in my PC (8 GB on the left), search for the missing files and they are all OK, tried several different locations, editing... and it still doesn't work. I'm sad, can someone help me please?

  Thank you!

  De : John Inzer

  You may have some incompatibility issues with your source files. Take a look at the following articles:

  Movie Maker 2 - problem solving - "cannot record a movie.

  http://tinyurl.com/yjvztz

  or

  http://www.Papajohn.org/mm2-issues-CantSaveMovie.html

  Type of file with Movie Maker compatibility

  http://tinyurl.com/v8tee

  or...

  http://www.myvideoproblems.com/tutorials/MovieMaker/File_type_compatibility.htm

  What file type should I use in Movie Maker?

  http://tinyurl.com/6n66g3

  or...

  http://www.myvideoproblems.com/tutorials/MovieMaker/WhichFileTypeInMovieMaker.htm

  John Inzer

  MS Digital Media MVP

  View

  This isn't a technical support

  I'm a volunteer

  Solutions that work for

  me I work for you

  Proceed at your own risk

  Another response of the community of Windows Vista discussion groups

• Movie Maker error: cannot save the movie to the specified location.

  When I wanted to save my movie on my computer, I received an error at 0%, it is said:

  "Windows Movie Maker cannot save the movie to the specified location. Verify that the original source files used in your movie are still available, that the backup location is still available, and that there is enough available disk space, and then try again. »

  There is nothing about it, I even 20 GB of free space, the video is only 1.24 MB. and files original source is always available.

  Someone HELP me please! I use Windows Vista Home Basic.

  original title: Windows Movie Maker 2.6 problems during the recording of movie files

  There are to many free converters that you can
  downloaded on the net, but for a few
  MP3 files... There are free converters online.

  The following site may be worth a try:

  Convert online
  http://www.online-convert.com/

  Open the drop window in the field of Audio Converter.

  Select... WMA

  In the next screen, left click on the Browse button and
  Navigate to the MP3 you want to convert

  Left, click Convert.

  When the file is converted will prompt you to
  download it.

• When I export the movie track of musk does not move properly

  When I export the movie track of musk does not move properly

  Hi Ann and Neil,

  Thank you for this, I had to import this project to another to keep my settings, so I womt lose the long job

  but after that I choos in the project of the EMT, since before it was cuda - and now its good performance.

  appriciate it.

  Gila

• I don't understand why suddenly software won't let me export the movie My she tells me, on all projects, there is an unknown problem and won't let me export

  I don't understand why suddenly software won't let me export the movie.

  She tells me, on all projects, there is an unknown problem and won't let me export

  This is now happening to me also. I've been editing happily nonstop for two months without this problem. The same project even made without problem a few days ago. Then update WME was released - he says something about fixing bugs? Now the first fails to encode using the encoder, Cuda mercury as in the photo of the op. No other changes to the system. Sometimes the first blocks also. Also noticed before makes oblivion on reload.

  Have tried - new driver nvidia, new projects, new sequences, removal of caches, different drives, uninstall and reinstall WME and first, reset the preferences.

  Very easy 9 min chronology of rendering fine just 4 days ago. Only lumetri, masks, stabilizing warp, moment 4 k - S.redgiant

  780GTX 32GB PC with several SSD and 7200 drives, i7 6 GB, Win 8.1 64

  --

  Update: has been working through some things with care. Really useful. Looks like it's specific project. Can be exported in single CPU mode. Put up-to-date I've run some additional tests. Older project exports ok.

  --

  Update: as I am with nvidia I downloaded the driver, custom installation selected, checked the box for a clean install. (according to the Adobe support chat)

  Do not click on the "maximum make quality" for the resizing option.

  Currently works for export in 1080. Will try 4 k later but at this point, it seems that the clean install video card driver that he fixed. It's all about a k 4 timeline.

  --

  Update: the custom clean install of nvidia driver finally solved the problem. Now, I can export the same project with all settings and sizes. A big thank you to the customer supports the person (MS) to tide me over.

• What are the best settings to export the .mov file? my video jumps

  What are the best settings to export the .mov file? I have movie 1280 x 720 and I can export without problem, but sometimes it jumps or gets stuck when I play. I don't know if it's my video card or the actual file. I used better quality setting and compressor H.264.

  Thank you.

  As you suggest, it could be a problem with your hardware that is not in a position to make the video on this particular resolution,

  I tried the same thing and it works fine for me without any problem. You can always export the movie in a format you want and then use other software video converter to get the desired format. If your video does not work then you can also, to let know you that there is a problem with your hardware.

• Cannot export the video file MOV

  Hello

  I am familiar with using photoshop edit photos, but new to video.

  Currently using Photoshop CC,

  I want to use Photoshop to modify some short video clips, apply after curlve adjustment layer. try to make the video but encounter this issue.

  "Cannot complete the command made video due to a problem with Adobe Media Encoder".

  I look for solutions on the net but can't find any answer may solve the problem, I've also updated Adobe Media Encoder and check that I have the Photoshop laterest version, but the problem presist.

  Here is the screenshot of the error and the video rendering settings page pop up.

  Please let me know what could be the problem and solutions to it.

  Thank you.

  

  

  Use better anmes of files and folders. Your names have hyphens and spaces which probably get truncated during the transfer on the chain of command to the SOUL.

  Mylenium

• Cannot publish the movie on Windows Movie Maker

  Hi guys,.

  I hope you can help me.
  I made a movie using Windows Movie Maker with video, photos, audio and added titles and transitions.
  The film lasts about 20 minutes.
  The size of the file is 1.31 MB
  I use Windows Vista
  All files are in the same place and no display of errors in movie maker
  I tried to publish the movie to my external hard drive which had plenty of available memory. After a few hours he failed and returned the error message below.  I then tried to publish it on my desk, which also has a lot of available memory. After a few hours it is again failed. I tried the WMV format. I then tried AVI format on my desk and it has too much, again after many hours.
  I get the error message is:
  "The video file cannot be published to the specified location. Check that the publishing location is still available, that there is enough free space on the disk, and then republish the movie again. »
  It took me a long time to collect the material, so I hope someone can help me out!
  Much appreciated!

  The error you receive usually indicates that your
  the project is too complex for your system resources. Also
  It is possible that one or more of the source files are not entirely
  compatible with Movie Maker or are corrupted somehow.

  The following items may be worth a visit:

  Windows Vista - solve a problem of edition
  a movie on your computer
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

• Unable to export the movie using XDCAM presets

  Hello

  We are facing a problem of export of sequences using custom presets for XDCAM to our panel.

  question:

  Our Panel, we export the sequences based on a "Preset" personalised XDCAM. But the sequence is not exported.

  The output file created is sometimes Kb. We use the code

  seq.exportDirect (outputfilepath. MOV, custompresetPath)

  to export the current sequence.

  When we manually select the sequence and make

  File-> export-> media->

  And import the custom preset of XDCAM and export its creation at the exit.

  First version - 2014.2 (8.2.0 (65))

  Media - 2014.2 (8.2.0.54) encoder

  and OS x version 10.9.4

  Can you please suggest a solution for this problem as soon as possible.

  Thanks in advance

  All the ExtendScript encoding-driven since the Organization should be based on the encoder (modern, fresh, tested, clean) API, not the. exportDirect() (unsupported, obsolete, treacherous). See PProPanel sample code.

  https://github.com/Adobe-CEP/samples/tree/master/PProPanel

• Cannot export the patches downloaded by UMDS (v4.1)

  I've been looking at using UMD to download patches on a shared repository, but I fight with the step where the patches downloaded are exported. On a freshly built Windows 2003 server, I installed fine UMDS, download patches (using Vmware-UMD-D) has worked well, but when I try to export using 'vmware-UMD-E-export-store d:\ ". " (where the drive d:\ is where I want the patches export) I get the following error;

  C:\Program Files\VMware\Infrastructure\Update Manager > vmware - umds.exe - E - export-store d:\
  During the initialization of the downloadConfig.xml configuration
  [2011-02-04 22:06:14.323 01740 info "App"] Current working directory: C:\Program Files\VMware\Infrastructure\Update Manager
  [2011-02-04 22:06:14.323 01740 verbose "ThreadPool"] TaskMax = 10, IoMin = 1, IoMax = 21
  [2011-02-04 22:06:14.323 01740 info "Libs"] Using the libcrypto, version 9080CF
  [2011-02-04 22:06:15.103 01740 info "App"] Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000
  INFO - [updateDownloader, 132] begins to export the updates...
  ERROR - [UMDSHelper, 280] missing version1.txt file
  ERROR - [updateDownloader, 303] Version mismatch. Check the location of the patch repository is correct and the version of the hotfix repositoy is the last

  The version1.txt file exists in the root of the repository patch, like the file version.txt (as well as the directories hostupdate, metadata, and vm-patches).  It may not be an incompatibility of versions with Update Manager as I have not yet tried to configure to see the shared repository and yet, I am simply configuration UMDS himself. I have also tried to move the patch repository (using vmware-UMD--set-config--patch-magasin E:\) which moves OK but does not solve my problem. In looking at downloadConfig.xml the patch repository location is correct (E: /).

  Someone at - he saw this before or know what to try as a fix?

  Kind regards

  Ed.

  It's VMware.Please offer a valid folder name command should look something like this vmware-UMD - E - export-store e:\export-depot. Let me know if it works

• Cannot export the script to AV as a .txt file

  I'm working on the script AV. I have exported successfully to PDF without any problem.

  If it has the option, when I click on file/export under... / text document, nothing happens, just no response. I exported several other AV scripts in the form of text documents that were of similar lengths and with similar content. Why is not now it works?

  It's currently a bug and we will address it in our next release.

  To work around the problem, you can try the following steps-

  -export the document under ASTX AV

  -Import the file ".astx" in history. (He'll get imported as a movie script)

  -Export this movie in text format script.

• Cannot export the Error Message

  I get the following error message when you try to export a LR 4.1 using Windows 7:

  Unable to export:

  An internal error has occurred: error Win32 API 2 ("the system cannot find the file specified.") When you call ShellExecuteExW of AgWorkspace.shellExecute

  Has anyone else had a similar problem?

  Yes, a lot of people, especially when using first export in LR4. The problem is probably caused by the export of Post-Processing and after: the field being misinformed (by LR, and not by the user). In this box simply action valid, for example "do nothing" is fine, and the problem should disappear.

• How to export the MOV?

  Hi all

  I have MTS files 1280x720p 29.97 FPS aspect Retiro 1:1 square pixel.

  I ecoded to MOV file to import it into CS3 PP is the best?

  While exporting the encode the file, I use Adobe media encoder as follows:

  Format: H.264 Blu - ray

  Preset: Custom

  Video export is verified

  Export Audio is enabled.

  Video: NTSC, 1280 x 720 @ 23.976 high profile

  AudioFormat PCM (I don't know what is it?)

  Multiplexer: tried TS & none

  When I get the file exported to my surprise there is no audio chanel at all.

  Anyone can unmask me what I did wrong?

  Thank you

  Shaul

  Bingo,

  I support the recommendation of Ann on Cineform, I bought on the advice of her and others I respect here and have been happy with it.

  Be aware of one thing, however. While I can't speak for CS3, CS4, I learned that the first is not correctly interpret the color for files HD space (I mean probably not correctly, guys, I learned here can better explain). The result is what you get in Cineform will look much hotter that you see in the first, but the version of Cineform is in fact a correct interpretation.

  With this caveat, highly recommended. Good things and not terribly expensive.