EXPORT WARNING TEMP

Similar Questions

• Export files Temp CS5.0.3 on C during even with zero as E

  I have a small project that uses a lot of Photoshop files as graphical models. I thought that because I put my "scratch disks" to "E" whenever I want to export, it would use 'E' as my temporary location temp generated/required during export files. But for some reason, my exports have been crashing because I'm running out of space on my C drive during the export. I discovered that for exports, there are several TEMP Photoshop files being created on my C - each as 3 GB drive, ends up cluttering my drive c. (I confirmed that I put the backup made at E destination) after rendering/export, these TEMP Photoshop files disappear on C. This is expected behavior? Is there something obvious that I can do to make sure that all the files go on a separate drive? Thank you!

  

  

  Adobe, like many other applications use the Temp Variable Windows directory for cache files. For example, if you export out of first and select the queue to the Media Encoder, it will show the C drive instead of the drive where the support is in fact located with the project file. This is because the source is to see this media encoder is the Directory Windows Temp Variable. You can change this by creating a folder on the E drive called Temp. Then right click on computer and go to properties. Select Advanced settings on the left, click Environment Variables on the bottom of this Panel. You will see the 2 files Temp and the places that appear in the upper part of the Panel of Environment Variables. Select Edit and then type or copy/paste in the location of the temporary directory created on another drive. Example - E:\Temp

  Restart Windows, and then the Variable cache should move to this directory. Remember that Windows uses to allocate things. So if this drive is removed or do not take a lot of time at the start and it will start with errors.

  Eric

  ADK

• Problem with restricted area 10.1.1

  I have a design that uses a slider to two pins to power the Board of Directors.  The board is a four layer with the mass and power on the inner planes.

  I tried the power supply Vcc on the header to NOT connect instead of inner power directly through the mounting header hole, but run a track on the top layer to the decoupling capacitor near which there vias to the plans of the power.

  I even if it wasn't a problem - just put out a Dungeon area under part of the header of the net power group.

  It works, but I always get a DRC:

  Select the netlist and DRC [frequency divider 2]<2010-03-15 15:45:44="">
  Rule design error: the object ' Pad: Type (THT) Name (2) share (J7) Net Clearance(1.0000 mil) (VCC) Hole(39.3701 mil) "in a place for net group area: power.".
  Verification of netlist and DRC filled;  1 error (s), 0 warning (s), 0 errors filtered;  Time: 0:00.34

  The only way I found was to watch a trace on the relevant layer all around the header and then use island of Delete/copper copper I knew from previous experience was likely to cause problems and leaves as a red herring in the layer.

  

  I realize I could just filter the error, but if I do that, when I go to export gerberas, Ultiboard always complains that there are pending errors.

  Thank you

  Dave

  HI David,

  It was me who had need of the moment. Now that I understand the problem, I can say that I did not have a better solution for you. I'll add a bug so that the export warning message does not appear for the mistakes of DRC that have been filtered, which would solve part of the problem.

• How to install two PS_HOME with a unix to two DB id.

  Team,

  
  

  I have the connection with opfs000 id in unix and set with the below details and installed .bash_profile PS HOME, PS_APP_HOME for the DB (fsaaa).

  Now, with the same id (id opfs000 of ), I need to install another PS HOME, PS_APP_HOME for the DB (fsbbb). Now, I don't know how to do this. can someone help me with the script or any suggeation of change in the psconfig.sh file

  TEMP = / tmp

  TUXDIR = / psoft/tux11g/tuxedo11gR1

  PS_HOME = / psoft/PT853/fssit1

  PS_APP_HOME = / psoft/FSCM92/fsaaa

  ORACLE_HOME=/U01/app/Oracle/product/12.1.0/dbhome_1

  PS_CFG_HOME = / psoft/PT853/fsaaa

  javaHome=/usr/java/JDK1.7.0_60/JRE; javahome Export

  COBDIR = / opt/chip/cobol; export COBDIR

  Path = $PATH: $HOME: $ORACLE_HOME/bin: $COBDIR/bin: / bin. export PATH

  LD_LIBRARY_PATH = $LD_LIBRARY_PATH: $ORACLE_HOME/lib: $TUXDIR/lib: $COBDIR/lib; export LD_LIBRARY_PATH

  PATH = $TUXDIR/bin: $ORACLE_BASE: $ORACLE_HOME: $ORACLE_BIN: $PATH

  . $PS_HOME/psconfig.sh

  export of TEMP

  export TUXDIR

  export PS_HOME

  Export ORACLE_HOME

  export PS_CFG_HOME

  The most common way to do this is to use an alias so when the user types something like the name of the environment originate the appropriate files.  For example, take what you have above and create a new script called fssit1_env.  Create aliases as psconfig.sh source and do other things you can do if it is not already in the script.

  alias fssit1='export ORACLE_SID=FSAAA; . /home/opfs000/fssit1_env'
  alias fssit2='export ORACLE_SID=FSBBB; . /home/opfs000/fssit2_env'
  

  Then add these aliases line to .bash_profile or create a separate alias and source it comes from the .bash_profile file. You would have then two files distinct psconfig.sh in two separate houses.  You cannot reference several PS_HOMEs at the same time of a psconfig.sh. The easiest way to change the configuration would be and then disconnect and reconnect.  If it is heavy, you can create a script that resets the user environment so that she can get psconfig.sh properly again.  I wouldn't just the line that prevents you supply psconfig.sh again.  You can add this environment will give the script at the beginning of each alias then.

  alias fssit2='. /home/opfs000/reset_env; export ORACLE_SID=FSBBB; . /home/opfs000/fssit2_env'
  

  Other options may be edit .bash_profile to use a menu option for home use or simply echoing the statements for the user to copy and paste when they connect.

• error in the identification of control for 11g update files...

  No 64-bit RAC ASM OEL4 Oracle10gR2
  
  Hi all
  
  I try to update our data base to 11g and I get the following error when I try to start the database with the command START UPGRADE. I make a manual level and following the upgrade guide:
  
  
  SQL > startup pfile='/opt/app/oracle/product/11.1.0/db_1/dbs/initFPRCTEMP.ora upgrade ';
  ORACLE instance started.
  
  Total System Global Area 4275781632 bytes
  Bytes of size 2151248 fixed
  2617248944 variable size bytes
  1644167168 of database buffers bytes
  Redo buffers 12214272 bytes
  ORA-00205: error in the identification of control files, see log alerts for more information
  
  When I checked the alertlog I found the following:
  
  ORA-00210: could not open the specified control file
  ORA-00202: control file: "+ FLASH1/fprctemp/controlfile/ctrl02_fprctemp.ctl".
  * Ksfdopn:2-ORA-17503: could not open the file +FLASH1/fprctemp/controlfile/ctrl02_fprctemp.ctl*
  ORA-15001: diskgroup "FLASH1" does not exist or is not mounted
  ORA-15077: could not locate instance ASM serving a required diskgroup
  ORA-29701: unable to connect to the Cluster Manager
  ORA-00210: could not open the specified control file
  ORA-00202: control file: "+ DATA1/fprctemp/controlfile/ctrl01_fprctemp.ctl".
  * Ksfdopn:2-ORA-17503: could not open the file +DATA1/fprctemp/controlfile/ctrl01_fprctemp.ctl*
  ORA-15001: diskgroup 'DATA1' does not exist or is not mounted
  ORA-15077: could not locate instance ASM serving a required diskgroup
  ORA-29701: unable to connect to the Cluster Manager
  Thu Aug 28 14:54:49 2008
  Running the Checker found 2 new failures of persistent data
  ORA - 205 marked during: ALTER DATABASE MOUNT...
  
  
  What's weird, is that I checked and the ASM instance is running. I checked all the environment variables (PATH and new home of 11g ORACLE_HOME) and I also put the oratab entry to point to the new home of the Oracle, as indicated in the documentation. Here are my entries in the .bash_profile file and the oratab file.
  
  # .bash_profile
  
  # Get the aliases and functions
  If [~/.bashrc - f]; then
  . ~/.bashrc
  FI
  
  # Specific programs startup and user environment
  
  $PATH = path: $HOME/bin
  
  stty erase ^ H
  
  ORACLE_BASE = / opt/app/oracle
  ORA_HTTP_HOME=/opt/app/Oracle/product/10.2.0/http_1
  ORACLE_HOME=/opt/app/Oracle/product/11.1.0/Db_1
  ORACLE_ASM_HOME=/opt/app/Oracle/product/10.2.0/asm_1
  ORACLE_SID = FPRCTEMP
  ORA_NLS10=$ORACLE_BASE/product/10.2.0/Db_1/NLS/data
  TNS_ADMIN=$ORACLE_BASE/product/10.2.0/Db_1/network/admin
  LD_LIBRARY_PATH=$ORACLE_BASE/product/11.1.0/Db_1/lib:$ORACLE_BASE/product/10.2.0/http_1/lib
  TEMP = / tmp
  
  export ORA_HTTP_HOME
  export ORACLE_SID
  export ORACLE_BASE
  Export ORACLE_HOME
  export ORACLE_ASM_HOME
  export ORA_NLS10
  Export TNS_ADMIN
  export LD_LIBRARY_PATH
  Export TMP
  export of TEMP
  
  username not defined
  
  $PATH = path: $HOME/BIN: $ORACLE_HOME/bin: $ORACLE_HOME/OPatch: $ORA_HTTP_HOME/opmn/bin: $LD_LIBRARY_PATH
  
  export PATH
  umask 022
  username not defined
  
  
  the oratab file entry:
  
  *:/opt/app/Oracle/product/10.2.0/http_1:N
  +ASM:/opt/app/Oracle/product/10.2.0/asm_1:Y
  FPRCTEMP:/opt/app/Oracle/product/11.1.0/Db_1:Y
  
  
  Thanks to you all.

  HM... Please take a look at ML -Note: 337737.1 (I just mention the combinations with an 11 g database)-I noticed that you do not have a RAC installation but nevertheless you CSS running to your instance of the DSO.

  CRS... ASM............ DB... Certified
  ------------------------------------------------
  11.1___11.1___11.1___Y
  11.1.___10.2___11.1___Y
  11.1___10.1.0.3__11.1___Y

  If upgrading the ASM instance should first solve this problem. The upgrade of the ASM means: you stop your database running in ASM and upgrade ASM with the DBUA instance. It'll take a few minutes, because there is no dictionary database in ASM.

  Kind regards
  Mike

  Published by: Mike Dietrich on August 29, 2008 17:26

• WARNING! : no definition not found for static exported routine: .main (String [])

  Hello world

  In the JDE, I opened two different projects in the workspace of "samples" where all demonstration projects. One of my apps built correctly, also it is open in the Simulator and runs smoothly. But in the same way, when I try to build and run my application to another, it shows in the Simulator.

  When generating, it displays the following warning, but still shows the "full version".

  WARNING! : no definition not found for static exported routine: .main (String [])

  What could be the problem? In my application, there is no hand method (String []) anywhere. Please help me to solve the problem, as I can't test my application. Best regards.

  Hi Rene, I found the solution. Can't say, it's a solution, but is a parameter that is required to be done, especially for execution the Midlets. Just put here what I did... Select the project, right-click on it, then select the "Application" tab, and then change the 'Midlet' Project Type, then click OK. She's. Clean and build the project, now it will not show the warning. in any case, thanks much, Rene, for your time and valuable suggestions. Best regards.

• SOUL of 2015 is made all creation as offline media, but there is no warning before export, and no media is offline.

  I can't describe it better than the title only.

  New version of 2015 of the SOUL is made all the media first as offline, but it is there no warning that any media is offline prior to export, and no media is offline in the project.

  Hello GoodbyeSkyPrime,

  and there is already the well known bug / workaround for those equipped with processors AMD. I wonder if this is also related somehow...

  What solution "well known"? Around a week ago I had heard of people exchanging autour .dll files in digital video applications and that is simply not recommended by us. -What are you referring? If so, it would certainly explain the weird behavior you describe.

  On the issue of the 'crash at startup' AMD CPUS, there is a bug filed and marked as fixed in the coming version. There is no official workaround solution I can offer other than the use of an earlier version of Premiere Pro. This difficulty shortly.  More information: https://helpx.adobe.com/premiere-pro/kb/amd-cpu-crash.html

  Thank you

  Kevin

• I get an error message when previewing: "1 WARNING: assets/private/var/folders/hm/sf71s7m90n727jhsls9fgsp80000gn/T/cleaning the start-up/InDesign Snippets / Snippet_30BBDDE25.idms was not exported because it is not found." It might have to do with an MPA

  I get an error message when previewing: "1 WARNING: assets/private/var/folders/hm/sf71s7m90n727jhsls9fgsp80000gn/T/cleaning the start-up/InDesign Snippets / Snippet_30BBDDE25.idms was not exported because it is not found." It might have to do with an image that I created in InDesign and exported an earnings per share, then created a PNG out of it. I hope that's it, it's, it's scare me... Thanks for the ideas.

  Please try to recreate a link to the file or try to check if the assets are actually located in the defined path.

  Thank you

  Sanjit

• Export failed, where is the temp file?

  I'm on version 6 of first.  An export of media has failed in the Middle due to lack of space.  Before export, the hard disk has about 1 GB of free space.  After export failed, the player ends up with 10MB of free space.  I suspect that there might be some temporary files and intermediaries created during the export process.  I checked the output folder and deleted the temp file. But the space has not been recovered.  Anyone else where I should check?

  You work with a single hard drive?

  C drive space http://forums.adobe.com/thread/1007934?tstart=0 see answer 4 for the parameter that you must manually change... and then delete the old temporary files

• Get-VIEvent - how to export the event type?  error, warning, or info

  Hello

  I know that the Get-VIEvent command allows you to specify the type of events to get back... that is to say [-Types < EventCategory [>]

  but, I want to extract all the events and export them to a CSV file. I want one of the columns to be "EventCategory", which will be ERROR, WARNING, or INFO, but I can't seem to find it.  $_. GetType(). Name gets me the type of event, but not the category.  I know that I can have my script executed 3 times (each time specifying the - parameter Types) but I want to run only once.  Any ideas?

  Thank you!

  Jeff

  Hello, horningj-

  I worked on a few elements that should attract the event category.  The first selects a few properties, including a calculated property that gets the event category:

  ## works well if no events of type 'EventEx'## get the .Net View object of the EventManager (used for getting the event Category) $viewEventMgr = Get-View EventManager ## get some VIEvents, select a few properties, including a calculated property for EventCategory Get-VIEvent | Select FullFormattedMessage, CreatedTime, @{n="EventCategory"; e={$strThisEventType = $_.GetType().Name; ($viewEventMgr.Description.EventInfo | ?{$_.Key -eq $strThisEventType}).Category}}
  

  It becomes VIEvents (the last 100, because I did not specify the parameter - MaxSamples) and returns the properties of data.  The calculated "EventCategory" property uses the type of the VIEvent object to search for in the collection of items EventDescriptionEventDetail in ownership eventInfo found in .net object View for the EventManager.  He then grabs the 'Category' of the corresponding element of EventDescriptionEventDetail property.

  Works fine unless you have any VIEvents type "EventEx" - then, this 'research' in EventDescriptionEventDetail collection method fails, because there is more than one element of this type (there are 91 of them at the moment).

  This led me to the next bit.  It is similar to the previous method, but it handles EventEx events too:

  ## get the .Net View object of the EventManager (used for getting the event Category)$viewEventMgr = Get-View EventManager
  
  ## get some VIEvents (the last 100, as "-MaxSamples" is not specified) Get-VIEvent | %{    ## put the pipeline varible into another variable; get its type    $oThisEvent = $_; $strThisEventType = $_.GetType().Name    ## if this event is of type "EventEx"    if ($strThisEventType -eq "EventEx") {        $strEventTypeId = $oThisEvent.EventTypeId;        ## get the EventInfo item (of type EventDescriptionEventDetail) whose "FullFormat" property begins with the EventTypeId of the VIEvent at hand, and get its "Category" property        $strCategory = ($viewEventMgr.Description.EventInfo | ?{$strRegexPattern = "^$strEventTypeId\|.*"; $_.FullFormat -match $strRegexPattern}).Category    } ## end if     ## else, can just grab the EventInfo item whose "Key" is the same as this event's type    else {$strCategory = ($viewEventMgr.Description.EventInfo | ?{$_.Key -eq $strThisEventType}).Category}    ## add a NoteProperty "EventCategory" to this event    $oThisEvent | Add-Member -MemberType NoteProperty -Name EventCategory -Value $strCategory -PassThru} | Select FullFormattedMessage, CreatedTime, EventCategory
  

  It seems that the EventTypeId of the event returned by Get-VIEvent is included in the first part of the property FullFormat of elements EventDescriptionEventDetail with EventEx key, separate from the rest of the value by a vertical pipe.  Thus, the EventTypeId of the VIEvents can be used to make a match on EventEx of events .net EventManager View object types to get the event 'category' (info, warning, error, user).

  You can, of course, change the Select statements to choice/choose the pieces of information you want to export and then export to a file of data as you please.

  How does do for you?

  * The message has been edited by mattboren on April 5, 2011 - added line at the beginning of the second piece of code '$viewEventMgr = Get-view event Manager.  It was already in the first room and assumes that the user has run the two parts in the same session, but added for completeness.

• Does anyone else have this PDF / X 1 - a warning to export?

  Intermittently, I get this warning dialog box in Indesign CS5 on WIndows XP when you export to PDF / X 1a: 2001:

  

  It happens only on certain issues.  A few seconds after he opens the PDF export finishes, opens and there seems to be nothing wrong with it.  Export of quality print or smallest file size does not all warnings.

  I see it with some profiles. Here it exports with an older version of the newsprint WINK profile. Click on the triangle and see if yours is a matter of profile:

  

  I see no problem with the exported PDF file

• Export the message 'WARNING '.

  I use the command export/function to create a .pdf file, and I get this dialog box 'warning ':

  "There is text overset on these pages"

  This means that the file will automatically have printing problems / others? Or is it a message generic ghost?

  If I understand correctly, offset printing will be used.

  Thank you in advance - Bruce

  Mac OS X 10.5.8

  CS4 6.0.3

  What 'in excess' means, is that you have a text box that is too full. Somewhere in your document, there is a text box that has a little more red to the bottom in the lower right corner. This symbol more means that you have (for example) eleven inches of a text value in a box of ten inches. It could be a whole lack of paragraph, or just a row of returns without any real word. Whatever it is, this means that you must increase the size of the text box, or remove the offending text (or return) to get the error message go away.

  However, it will not cause your print job to fail. He's simply trying to warn you that there is text living in your identity document, somewhere, that are not visible in the final printed document.

• Export xml in c:\temp

  I have a need to export my content from a sql table in c:\temp
  Here's what I've got so far, but need help to complete, thanks, Doug

  import oracle.xml.sql.query.OracleXMLQuery;
  import java.lang.*;
  import java.sql.*;
  
  
  // class to test the sting generation
  class testXMLSQL {
  
      private static String url = "jdbc:oracle:thin:@localhost:1521:orcl";
      private static String username = "caprs";
      private static String password = "caprs";
  
      public static void main(String[] argv)
         {
            String pdfOutputPath = "c:\\temp\\testpass.XML";
  
            try{
               //create the connection
                connection conn = getConnection(url, username, password);
  
               // create the query class
                OracleXMLQuery qry = new OracleXMLQuery(conn, "select * from bi_pub_from_tm1");
  
              //get the XML string
              String str = qry.getXMLString();
  
             // Print the XML output

  imports go with other imports, the other code can go there after your / / print the XML comment

  John

• WARNING message windows has recovered from a mistake serious c:\docume~1\hp_owner\locals~1\temp\wer2a35.dir00\mini100311-ol.dmp

  I got this warning message. what it means?

  This means that there was a mistake of some sort and diagnostic information (aka a "memory dump") has been created and saved to the specified location.

  If other things seem to work OK, ignore the message.

  What were you doing when the warning message appeared?

• Warning message about WM.movies not exported, but I have no video in the project

  Help I'm finishing a web project and I get the message before each of the nine pages: 2Warnings: WM.movies well Users\Gary\Downloads\Adobestock_54929330_Video_HD C:\Users\Gary\Downloads\Adobestock_54929330_video_HD_WM (1) not exported because it is not found. I'm lost I have no video in the project just of gifs, help please

  [Moved from the endorsement, general, all Adobe forums Lounge for a specific support by product - moderator forum]

  [Edited for clarity - moderator title]

  It's strange. Did you go to that location on your computer to see if there is a video there.

  Also, can you export your HTML pages and see if there is something in the code that references the videos?

  File > export as HTML